K.21 Power Induction Tests

2006-09-12 Thread emc-p...@ieee.org
Hello All, Can anyone in the group recommend a lab that is set up to perform the 600 V, 16 2/3 Hz power induction tests called out in ITU Recommendation K.21? Thanks in advance. Regards, Bob Zmudka Siemens Subscriber Networks, Inc. 4849 Alpha Road Dallas, TX, USA 75244 Tel: 972-759-2542 Fax

Re: New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
As to deciding which version of EN 60204-1 to use: a small added complication is that it is on the harmonized lists for both MD and LVD. (At the moment, both lists are in agreement, with each other if not with Cenelec!) There are other examples (LVD & MD), such as EN 60335-1. And EN 61131-2 (PLC

RE: Ethernet bulkhead

2006-09-12 Thread emc-p...@ieee.org
_ From: Derek Walton [mailto:lfresea...@aol.com] Sent: Tuesday, September 12, 2006 1:13 PM To: IEEE EMC Discussion Group Subject: Ethernet bulkhead HI All, I've been looking for a bulkhead ethernet connector that will terminate a shielded cable. I've found a whole bunch of plain ol

Re: New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
Scott, A test standard or a product family/product standard or a generic standard is ratified/adopted by CEN/CENELEC/ETSI and therefore "applicable" as a normal standard (product liabillity!!!) but NOT under the "CE regime" until the publication in the OJEU! That is a time problem because e. g. t

RE: Ethernet bulkhead

2006-09-12 Thread emc-p...@ieee.org
Hi All, thanks to JOhn, I found exactly what I needed: http://www.viewpoint.com/installer/inde .html?05.00.02.05|frame&http://www.l-com.com/item.aspx?id=2678 &View=3D Thanks John, everyone that replied. Cheers, Derek. John Cochran wrote on 9/12/

Re: New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
That is one of our big problems in Europe: CENELEC/CEN/ETSI are publishing new standards e.g. EN 60204-1:2006-06 but the commission don´t publish these reference "just in time"! Therefore the new standards haven´t a "presumption of conformity" in the meaning of the "new approach"! We have a long

Re: New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
However, it is my understanding that if it has not been published in the OJ, it doesn't exist as a valid test standard yet?? Scott "M. Loerzer-Mobile \(GLOBALNORM\)" 09/12/2006 04:35 PM To "Glyn Garside" , Scott Barrows/USA/VERITAS@VERITAS cc "EMC-PSTC" Subject Re: New lists of

RE: Ethernet bulkhead

2006-09-12 Thread emc-p...@ieee.org
Bulgin makes a bulkhead connector that is superior to anything else I had tried. Of course, I need waterproof connectors (IP68), so that limits the field. The Bulgin part is PX0833/E with the ground wire. John Cochran _ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of D

Ethernet bulkhead

2006-09-12 Thread emc-p...@ieee.org
HI All, I've been looking for a bulkhead ethernet connector that will terminate a shielded cable. I've found a whole bunch of plain old connectors, but I'm trying to avoid making an adaptor. Note, this is for passing the signal out of a shield room, it's not intended for deployment. Can anyone p

Re: New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
EN 692 has been the subject of a long running argument about the use of two hand controls. I've not looked at the new version, but I think this is likely to be the main area of concern about old standard. Let me know if you really want to know more and I'll ask my press specialist what he sees

Re: New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
Hi All, I notice that the new EN 60204-1 was not included on the applicable standards?? Scott - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To po

New lists of Harmonized Stds for Machinery, Lifts (elevators) and PPE (personal protective equipment )

2006-09-12 Thread emc-p...@ieee.org
EU Official Journal 2 Aug 2006 http://europa.eu.int/eur-lex/lex/JOHtml.do?uri=OJ:C:2006:180:SOM:EN:HTML [link is to English page, see top of that page for links to 22 other languages] MD: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:C:2006:180:0011:0064:EN:PDF PPE: http://eur-lex.eu

Compliance Consultant in EUROPE, Germany.

2006-09-12 Thread emc-p...@ieee.org
Hello Everybody, We are looking for a Compliance consultant in EUROPE – Germany. Please contact me directly for this Thank you Sudhakar Wasnik SanDisk Corp. Tel. 408-801-1510 Email. swas...@sandisk.com _

RE: EN 60950-1 RS485 and TNV-1

2006-09-12 Thread emc-p...@ieee.org
Piotr - There is a CENELEC Report/ETSI Guide, EG 201 212 V1.2.1. This document provides guidelines for determining whether a circuit is SELV or TNV and is still available (labeled as 'historical') from ETSI's web site. FWIW, as late as 2005, a BT Suppliers Information Note, SIN349 v2.0, referenc

Re: EN 60950-1 RS485 and TNV-1

2006-09-12 Thread emc-p...@ieee.org
Joe, If that exemption were not there, the connection between mouse and PC I would understand as TELECOMMUNICATION NETWORK. Lighting cause ground differences so I do not suppose underground cables being free of lighting transients. The question left: If my connection is the TELECOMMUNICATION

Four China RoHS Test Standards

2006-09-12 Thread emc-p...@ieee.org
Dear Members, FYI. The following four China RoHS test standards (national standards) have been approved by the authorities. They are expected to be published soon. This news has been posted at http://www.cesi.ac.cn/datumview.aspx?sort=1