ect: Re: [PSES] Kikusui TOS3200 Leakage Current Meter
This afternoon's update: the resolution of the inductive current probes I
have are limited to 10 Ma. All currents look like noise.
Peter Tarver
> -Original Message-
> From: Peter Tarver
> Sent: Wednesday, April 26, 2017 09:
This afternoon's update: the resolution of the inductive current probes I have
are limited to 10 Ma. All currents look like noise.
Peter Tarver
> -Original Message-
> From: Peter Tarver
> Sent: Wednesday, April 26, 2017 09:29
>
> Thank you, Pete.
>
> I have received an initial response
to:ptar...@enphaseenergy.com]
Sent: Wednesday, April 26, 2017 9:29 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Kikusui TOS3200 Leakage Current Meter
Thank you, Pete.
I have received an initial response from Kikusui requesting additional
information about the EUT and the test setup.
I haven't
Thank you, Pete.
I have received an initial response from Kikusui requesting additional
information about the EUT and the test setup.
I haven't looked at the waveforms yet, other than voltage. That's on the docket.
Regarding the matter of scale, (as I'm sure you're aware) the Simpson 228 uses
-1201
p.perk...@ieee.org
-Original Message-
From: Peter Tarver [mailto:ptar...@enphaseenergy.com]
Sent: Tuesday, April 25, 2017 4:23 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Kikusui TOS3200 Leakage Current Meter
Thank you, Nute.
Page 70 of the manual indicates the ability to selec
Thank you, Nute.
Page 70 of the manual indicates the ability to select a measuring network.
According to the first paragraph on this page, it's a meter only for voltage
measurements. Page 71 shows how to select a measurement network when using
meter mode.
FWIW, I used Networks A, B and G on
Thank you, John.
Agreed, but I have also moved the conductors around, used multiple wire
routings, multiple power sources, power systems in two buildings, on a ground
plane (this was happenstance in the second building)...
While the results have minor differences, the effects I'm seeing are
that commercial test
equipment would probably not reveal.
Brian
-Original Message-
From: John Woodgate [mailto:jmw1...@btinternet.com]
Sent: Monday, April 24, 2017 11:30 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Kikusui TOS3200 Leakage Current Meter
Stray capacitances
" of Figure 4-7.
Hope this helps.
Best regards,
Rich
> -Original Message-
> From: Peter Tarver
> [mailto:ptar...@enphaseenergy.com]
> Sent: Monday, April 24, 2017 4:49 PM
> To: EMC-PSTC@LISTSERV.IEEE.ORG
> Subject: [PSES] Kikusui TOS3200 Leakage Current
Meter
in aeternum manent.
-Original Message-
From: Peter Tarver [mailto:ptar...@enphaseenergy.com]
Sent: Tuesday, 25 April 2017 00:49
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Kikusui TOS3200 Leakage Current Meter
Hello.
I am using a Kikusui TOS3200 to measure touch current for a 61010-1
Hello.
I am using a Kikusui TOS3200 to measure touch current for a 61010-1 application.
The product is double-insulated and has accessible USB port connector shells
connected to the secondary circuit reference.
When using the TOS3200 in meter mode (using the two external meter leads), I
11 matches
Mail list logo