On Sat, 29 Jan 2011 17:01:58 -0500, you wrote:
Now, my nefarious reason - I'm realized that a career of hand scraping
is not for me. I've mapped the entire length of the hold-down/bed with
a depth gauge, and know, for every inch of X, the difference between the
current station and the 0
On 1/29/2011 5:13 PM, andy pugh wrote:
My question is, can comp_file be used to map out those inconsistent
heights in software, so that I don't have to file and scrape anymore? ;-)
My guess would be no, as the compensation file applies the offset to
the same axis as it is looking up
On 1/29/2011 5:46 PM, gene heskett wrote:
ISTR where I read that as being an emc capability someplace back in the fog
of time, Mark. Screw error mapping I believe it was called.
But, so you don't have to, consider that if the saws can be replaced with
wide diamond wheels, say like as used
On 1/29/2011 7:47 PM, Jon Elson wrote:
Mark Wendt (Contractor) wrote:
My question is, can comp_file be used to map out those inconsistent
heights in software, so that I don't have to file and scrape anymore? ;-)
You probably need to talk to Stuart Stevenson, who built a fairly
On 1/30/2011 4:34 AM, Steve Blackmore wrote:
Now, my nefarious reason - I'm realized that a career of hand scraping
is not for me. I've mapped the entire length of the hold-down/bed with
a depth gauge, and know, for every inch of X, the difference between the
current station and the 0 point
On 30 January 2011 13:27, Mark Wendt (Contractor)
mark.we...@nrl.navy.mil wrote:
I used to use vixen files back in the 70's when I
puttered around with automotive body work using lead.
Google
Oh, you mean a Dreadnought file :)
(I thought it might be a Millenicut, but those are different again)
I have a number of projects where I have to thin down material for each part. I
generally create a single path and then just change the depth as needed.
However
what I'm wondering is if there's a way to have a single path drawn and then in
the code put something that would tell it to repeat
I agree, I have used a few of the Rosewill Moschip based cards for step
and direction and they work fine.The EPP mode for use with the smart
motion cards is where problems pop up.
Dave
On 1/29/2011 7:20 PM, Kirk Wallace wrote:
On Sat, 2011-01-29 at 15:07 -0800, craig wrote:
Where
Chris,
you can create a python file that just asks you for the required info.
Look at facing.py for such a sample.
Ries
On Jan 30, 2011, at 8:54 AM, Chris Reynolds wrote:
I have a number of projects where I have to thin down material for
each part. I
generally create a single path and
Is there a way to alter this program so that I can put a target depth and just
have it repeat at .020 intervals until it reaches the target depth?
http://linuxcnc.org/docs/html/gcode_main.html#cha:O-Codes
#start = 0
#increment = 0.02
#finish = -0.5
#1 = #start
O100 WHILE [#1 GT [#finish +
Another alternative is owords
Check out http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Oword
On Sun, Jan 30, 2011 at 9:21 AM, andy pugh bodge...@gmail.com wrote:
Is there a way to alter this program so that I can put a target depth and
just
have it repeat at .020 intervals until it reaches
Thanks everyone for the suggestions and help. I really appreciate it.
Chris
http://www.blowyourbrassoff.com
http://www.builderofstuff.com
Just a man, his shop, and a long list of unfinished projects...
--
Special
On Sunday, January 30, 2011 10:28:26 am Mark Wendt (Contractor) did opine:
On 1/29/2011 5:46 PM, gene heskett wrote:
ISTR where I read that as being an emc capability someplace back in
the fog of time, Mark. Screw error mapping I believe it was called.
But, so you don't have to,
On 1/30/2011 8:45 AM, andy pugh wrote:
On 30 January 2011 13:27, Mark Wendt (Contractor)
mark.we...@nrl.navy.mil wrote:
I used to use vixen files back in the 70's when I
puttered around with automotive body work using lead.
Google
Oh, you mean a Dreadnought file :)
(I thought
On 1/30/2011 10:29 AM, gene heskett wrote:
On 1/29/2011 5:46 PM, gene heskett wrote:
I forgot to mention, the hold-down bed, as is much of the machine
itself, is aluminum. I was able to tilt the saw spindle to fit a
sanding drum and work at shaving the top of the hold-down bed down, but
the
Igor Chudov wrote:
Now, my servo motor with the attached resolver still out of the rotary
table, I have a HYOOGE success!
The cause of jerkiness was a TOO HIGH input voltage to the resolver.I am
hypothesizing that this caused too much voltage to be passed into the
resolver converter input,
On Sun, Jan 30, 2011 at 10:16:13AM -0500, David M. Wright wrote:
APIC is not enabled but the script appears to work around that.
BTW how does one enable LAPIC during boot as is suggested? I'm not
familiar with how the linux bootloader works or for that matter where it
resides (remember
Chris,
Thanks for the quick response
I'll have a go at your suggestions a bit later as I'm into another
project right now.
Regards,
Dave
Chris Radek wrote:
On Sun, Jan 30, 2011 at 10:16:13AM -0500, David M. Wright wrote:
APIC is not enabled but the script appears to work around that.
jeff,
You can try
$ which emc
in order to know which emc you are running.
Probably you are running the one that comes with the cd.
You can try to run directly the emc in your emc-dev directory
$ ~/emc-dev/whatever/emc
This works for me (I don't set any special environment like you
$
- Original Message -
From: Chris Reynolds c_reynolds2...@yahoo.com
To: emc-users@lists.sourceforge.net
Sent: Sunday, January 30, 2011 8:54 AM
Subject: [Emc-users] repeating code
I have a number of projects where I have to thin down material for each
part. I
generally create a single
Congratulations,
A really nice problem/solution to be kept long and safe in the archives
of EMC-USERS!!!
Javier
On Sun, 2011-01-30 at 11:52 -0600, Jon Elson wrote:
Igor Chudov wrote:
Now, my servo motor with the attached resolver still out of the rotary
table, I have a HYOOGE success!
On Sun, Jan 30, 2011 at 4:03 PM, jros j...@unavarra.es wrote:
Congratulations,
A really nice problem/solution to be kept long and safe in the archives
of EMC-USERS!!!
Thanks. The archives are great and searchable.
As an SEO, I try to make sure to put all the right keywords in my
Mark,
I don't think it will do what you want. My assumption was 'X motion is
perfect' and adjusted to that. I did not adjust Z for X motion. I adjusted Z
for Y motion.
You are welcome to use any part or all of this.
http://www.mpm1.com:8080/machines/cinci/cinci_running/cincikins.c
Stuart
--
On Sunday, January 30, 2011 06:47:36 pm Mark Wendt (Contractor) did opine:
On 1/30/2011 10:29 AM, gene heskett wrote:
On 1/29/2011 5:46 PM, gene heskett wrote:
I forgot to mention, the hold-down bed, as is much of the machine
itself, is aluminum. I was able to tilt the saw spindle to fit
Here is a bit of CNC 4th axis video for your adult visual needs.
http://www.youtube.com/watch?v=ag3XjCAXP14
Guys, do you think that it is too much weight on the old Bridgeport's table?
I would guess that it is 250 lbs or so.
i
On Mon, 2011-01-31 at 00:19 -0600, Igor Chudov wrote:
Here is a bit of CNC 4th axis video for your adult visual needs.
http://www.youtube.com/watch?v=ag3XjCAXP14
Guys, do you think that it is too much weight on the old Bridgeport's table?
I would guess that it is 250 lbs or so.
i
Good
26 matches
Mail list logo
