Hello,
I tried to change versions from 2.5 master to 2.6.5 on an linuxcnc
installation and noticed a regression. The radiobutton does not select its
iniital value on startup. I have not yet looked into the other pyvcp
widgets to check if the same problem exists with them too.
I am using a pvcp ba
19th and 20th of October would be a good time for me too.
BR
Max.
> On Mon, Jul 8, 2013 at 10:27 PM, Viesturs Lācis
> wrote:
>
>>
>>
> If there are no objections I would reserve my workplace/workshop in
> Stuttgart, BW for the 19./20.th October
> for our integrator meeting so we can all put
Hello Marius,
I always order mine from Lascar Elektronik in Germany. If you are lucky
then they have something in stock.
www.lascar.com
+49 7459 1271
BR+Good luck
Max.
> Does somebody have spare kit in EU? Need it in Lithuania.
>
>
> ---
Hello Rene,
is your workshop big enough for all the people that have already stated
their interest?
Can you tell me/us where you are located around Stuttgart ?
And maybe we should move this to a wiki page ?
BR
Max.
> Hello,
> my name is Rene I'm also located next to Stuttgart. A meeting i
stria
Maximilian H., mhemc2nos...@googlemail.com, near Stuttgart, Germany
BR
Max.
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-de
Hello Everybody,
southern Germany sounds great to me ;) (Especially since I am living
close to Stuttgart). So I'd love to come.
BR
Max.
> Hello all.
>
>
> Is there a LinuxCNC integrator workshop planned in/around Germany within
> the next year or so?
> If not - are there people interested in
rmittent or flaky?
>
> Some systems seem to take a time out when a USB device goes on or offline.
>
> Dave
>
> On 5/19/2013 10:19 AM, Maximilian H wrote:
>> Hello Everybody,
>>
>> many thanks for your great input. It has given me some ideas of what I
>> can
Hello Peter,
> One thing to verify once you get a watchdog has bitten error is to
verify if
> that its a real watchdog bite or whether its somehow a false noise
generated
> report. Can you toggle any I/O bits (via halcmd) after the watchdog
has bit
> event?
I do have leds on the digital outputs
>> To: "Enhanced Machine Controller (EMC)"
>> Subject: Re: [Emc-users] 7i43 watchdog has bitten, looking for the cause ?
>>
>> On 05/17/2013 03:27 PM, Andrew wrote:
>>> 2013/5/17 Maximilian H
>>>
>>>> I use a
>>>> ser
Hello,
as an additional info the cpu is a athlon x2 250 @3GHz, 4G of ram
installed, asus mainboard, onboard lpt port to connect to the 7i43.
BR
Max.
--
AlienVault Unified Security Management (USM) platform delivers co
Hello,
as an additional info the cpu is a athlon x2 250 @3GHz, 4G of ram
installed, asus mainboard, onboard lpt port to connect to the 7i43.
BR
Max.
--
AlienVault Unified Security Management (USM) platform delivers co
Hello,
> Which version of LinuxCNC are you using?
I tried with both 2.5.2 and 2.4.7, machine is a ubuntu 10.04 lucid 32
bits with rtai installed from the emc2 cd. The 2.5.2 version is stock
from the deb packages. The 2.4.7 version has some changes to the
interpreter, but no other changes to other
Hello,
I have a old mill that I want to use with linuxcnc.
I have prepared a pc with a 7i43+7i33+custom pcb to interface the mill.
That pc with the interface I have both tested with the latency test and
also with 7i43+7i33+pcb and the output for EstopWrite connected to the
input of EstopSense i
Hello Bruce,
I am running a Mesa 7i43+7i33 servo setup myself. If you press estop, or
if estop is generated through the estop chain, then you do not loose
position.
To loose position on a rotary encoder or linear scale with a 7i33 you'd
need to switch off power to the 7i33, which should trigger
Hello,
I have a Lava Moko L72.2 pci parallel port card, but I can only use it
with epp_wide=0 in the loadrt line for the mesanet 7i43.
$ halrun
halcmd: loadrt hostmot2
halcmd: loadrt probe_parport
halcmd: loadrt hm2_7i43 config="firmware=hm2/7i43/SVST4_4B.BIT
num_encoders=4 num_pwmgens=4 num_ste
Hello,
while there is a too big to miss notice in the wiki that upgrading from
8.04 to 10.04. will break things-which is all well if you are yourself
the well informed operator of the machine-it will happen somewhere ;)
Needless to say I had to write back a backup after I had the case of an
mach
a very big thanks to Michael Geszkiewicz for writing the linux flash
program :)
BR
Max.
> On Mon, 18 Jun 2012, Maximilian H wrote:
>
>> Date: Mon, 18 Jun 2012 12:55:37 +0200
>> From: Maximilian H
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
Hello Peter,
thanks for your last answer. Power cycling the computer did solve my
problem. The 5i25 now loads fine together with the 7i77.
I will now proceed to write some pyvcp debugger gui for my intended
setup to get things going.
Big thanks to you for providing the answers to my problems on
.0: PCI INT A disabled
[14170.506767] hm2_pci: probe of :03:01.0 failed with error -22
[14170.506789] HAL: removing component 05
[14170.506792] RTAPI: module 5 exiting
[14170.506797] RTAPI: module 5 exited, name: 'HAL_hm2_pci'
[14170.506799] HAL: component 05 removed, name = 'hm2
0100
>> From: andy pugh
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: "Enhanced Machine Controller (EMC)"
>> Subject: Re: [Emc-users] 5i25 detected, but not the 7i77 yet
>>
>> On 16 June 2012 17:23, Maximilian H wrot
Hello,
I have now spend the last few hours trying to create a first lab setup
with the mesanet 5i25 and the 7i77, but the 7i77 is not recognized at
all. In general I have been setting up and running a few machines with
the 7i43 cards since 2008 now-so I am not a total noob.
The 5i25 is installed
version ?
I have ISE 12.3 installed: Do you happen to know whether that version
will work ?
Thanks
BR
Max.
> On Wed, 17 Aug 2011, Maximilian H wrote:
>
>> Date: Wed, 17 Aug 2011 09:01:00 +0200
>> From: Maximilian H
>> Reply-To: "Enhanced Machine Controller (EMC)&q
Hello List,
I have run into a problem with my new revision of my pcb which adapts a
7i43 and a 7i33 to a machine of mine.
Before I had W3 in the up position, which enabled the pull ups on the
7i43. Then I inverted the polarity of the outputs in the hal layer,i.e.
the output signals where active
Hello,
I tried a Dell Latidude D600 about 8 months back with EMC2 10.04. The
D600 is the predecessor to the D610. They have the same accessoires,
docking station, screen. CPU and mainboard are different, afaik.
I could install without problems, but the laptop frooze after a few
hours of usage of
Hey David,
I use emc2 inside virtualbox myself for compiling emc2 and building deb
packages inside the guest os for myself with the tweaks I need.
That way I can do this on my work laptop in a stable environment even if
I have other versions of Ubuntu (like 10.10 amd64) running as the host.
Att
Hello Everybody,
after noticing some bad noises on a machine I noticed that when I
command an output of -10.0V on an stg2 card that it actually outputs +10V.
To debug and reproduce I did this:
setp stg.2.dac-value -10
or
setp stg.2.dac-value -9.999
measured approx. +10V with a voltmeter, not ok
Hey,
I like your idea, which is interesting to me because I currently keep
the user defined M100+ files are in the same directory as the other ngc
files - which is not a good idea since ngc files sometimes need to be
deleted or changed, but the M files should be kept immutable.
So if PROGRAM_PRE
Hello Everybody,
I'd like to use some extra ICs to read an ADC at a relatively low speed
to get some values from potentiometers. And I2C or SPI integrated
circuits are quite common.
I currently have a mesa 7i43, 200k and 400k versions with an extra pcb
to adapt to the cnc machine. I'd like to pu
Hello Everybody,
is there a way to log the current position, velocity and acceleration to
syslog if there is an error situation that gets logged to /var/log/syslog ?
I might have a problem with the mechanics that only happens under
certain conditions and I want to have more data to see if a patt
Hello Sebastian,
I am currently not around the shop for the next days, but I will
pastebin them then.
Cheers
Max
> Maximilian H wrote:
>> I got a 2 port SUN1888 pci parallel port today - only card I could find
>> in town without a moschip chipset.
>>
>> I haven&
Hello Peter,
I got a 2 port SUN1888 pci parallel port today - only card I could find
in town without a moschip chipset.
I haven't tried to use the 2nd port, but the first one gives me a nice
2msecs servo cycle time with an 7i43.
With one msec I get bitten from the watchdog, but two msecs seems
Hello Jon,
0,5 millisecs is quite good. I was asking because I could get the Oxford
PCI840 to just about 10ms servo cycle time before the driver would cause
an error.
Cheers
Max
> Maximilian H wrote:
>> Hello Everybody,
>>
>> I was wondering which is a reliable setting f
Hello Jon,
thanks for the url. My problem is that I sometimes remember having seen
something in the wiki, but then I cannot find it again. I was thinking
that maybe I should summarize my epp pci card experiences in the wiki in
a seperate page.
Cheers
Max
> Jon Elson wrote:
>> I have put some
Hello Everybody,
I was wondering which is a reliable setting for a servo cycle time with
an extra pci parallel card, assuming that the whole setup works "as it
should" ?
I have been using a 1 millisec servo cycle time with onboard motherboard
parallel ports, but with extra pci parallel port card
Hello Peter,
>
> The problem is that with add-in PCI parallel ports, you somehow need to set
> them to the proper mode (EPP in this case) Unfortunately for some parallel
> chips this requires chip specific register frobbing, and often all the card
> comes with is a windows driver (and chip doc
Hello Peter,
why is the linux pp driver important with the pci parallel port card ? I
mean I have disabled the parport_pc, parport, ppdev and lp modules in
/etc/modprobe.d/emc2, so these pci parallel ports do not get claimed by
the linux pp driver at all. Or am I missing something ?
I'll try to
Hello,
thanks for all your fast and detailed replies - I do feel that I am in
excellent virtual company on this nice and rainy Sunday afternoon :)
To summarize: I should be ok as long as I use a <2 feet parallel port
cable with either a SUN1888 or Oxford PCI952 card and a 7i43 rev. C.
Cheers
Ma
or anybody else tried these ite or sun1888 chipsets.
Cheers
Max
> Maximilian H wrote:
>> I am trying to get this combination of a mesa 7i43 and an oxford
>> semiconductor ox12pci840 chipset pci parallel card to run, but I cannot
>> get it to run in epp_wide mode and
Hello Everybody,
I am trying to get this combination of a mesa 7i43 and an oxford
semiconductor ox12pci840 chipset pci parallel card to run, but I cannot
get it to run in epp_wide mode and I cannot get a servo thread to run
with a cycle time of less than 10 millisecs. With onboard mainboards I
go
Hey Steve,
have a look at the interpreter source file interp_convert.cc, function
int Interp::convert_straight.
The piece of code that you probably want to change is this one:
START_SPEED_FEED_SYNCH(block->k_number, 0);
Just as a try I'd suggest you change that to:
START_SPEED_FEED_SYNCH
Hello Eric,
please have a look at the motion.digital-out-XX pins in hal and the
num_dio parameter to the "loadrt motmod" line if the default number of 4
dio pins is not enough.
I think the num_dio parameter is a fairly recent feature enhancement, so
you should run a 2.3.something version to use
Hello Everybody,
I am trying to suppress the drawing of the preview in AXIS of one G0
move using (AXIS,hide) and (AXIS,show).
However, it does not work as I think it should ;)
Does anybody have something similar working or could point me to a
working example ?
Excerpt of non-working gcode:
# =
Hello Chris,
i do have more interpreter code. To whom to i submit it for
discussion/review/commit ?
Thanks
BR
Max
> On Mon, Jun 29, 2009 at 02:28:12PM +0200, Maximilian H wrote:
>> The attached small patch to Interp::read_items allows o-words with
>> n-words without cha
Hello,
i am still using n-words ( line numbers, old habbits die hard ).
However when the line contains o-words, currently (2.3.1) no other words
may be present.
The attached small patch to Interp::read_items allows o-words with
n-words without changing any other behaviour (methinks).
Would you
5:43:19AM +0100, Maximilian wrote:
>>
>>
>>> When i close the axis gui with the big X in the upper right corner of
>>> the window my amps stay tuned on and start drifting because there is no
>>> pid controller providing any commanded position.
>>> [.
it up so that everybody can use it ?
Cheers
Max
> On Wed, Nov 12, 2008 at 05:43:19AM +0100, Maximilian wrote:
>
>> When i close the axis gui with the big X in the upper right corner of
>> the window my amps stay tuned on and start drifting because there is no
>> pid
Hey Everybody,
just a quick question because i am lazy enough not to be looking at the
source, maybe somebody of you already knows the answer.
When i close the axis gui with the big X in the upper right corner of
the window my amps stay tuned on and start drifting because there is no
pid control
Hey Ahmed,
hello and a good morning back to Egypt. After seeing the many replies
that you've already gotten, i'll just recommend that you carefully read
the emc2 documentation, especially the integrator's manual.
How big is the 3 axis mill that you plan to work on ? Will you be
driving the stepp
Hey Chris, Hey Dave,
>> When you home, do you do the axes all at the same time, or one at a
>> time? I know the STG (the card itself) has some limitations when
>> searching for index on more than one axis at a time.
The stg1 card can only detect the index pulse on two axes which are
selectable
Hey Dave,
thanks for your reply. I modified the stg driver early this week and
then tested it in a lab setup with a rotary encoder - but i won't be
able to test it on a live machine before Friday next week. There is a
little bug that i found and fixed regarding autodetection - it won't
work if yo
Hey John,
if you are refering to the EMC2 Ubuntu 8.04 CD and its installation,
then the password "should" be what you entered when you installed Ubuntu.
Have you finished the installation and has the computer rebooted or are
you really "in the process of installing it" ?
If you have really fini
stg card will then work in general, the encoders will count, DI and
DO works, but the index pulse will not work.
To whom do i submit a patch ? I also made some other enhancements (index
polarity settable via hal, debug improvements ).
Cheers
Max
> On Mon, Oct 13, 2008 at 12:35:56AM +0200, Maxim
Hey Everybody,
i'd like to convert a mill to emc2 and still have an unused stg1 card.
Last Friday i had the machine so far that i could get all axis moving
and homing, but i got no signal from the linear encoder's index pulse.
I did connect the (undocumented) hal stg.X.index-enable pin to the
a
53 matches
Mail list logo
