On 05/24/2017 03:48 PM, Sebastian Kuzminsky wrote:
> I see in the logs that there was a period of high web
> activity, starting about 15:09 EDT and ending just
> recently, at 16:40 EDT. During that time the machine
> exhausted its 1 GB of RAM and went 2 GB into swap, which
> causes very high la
On 24 May 2017 at 23:04, Marcus Bowman
wrote:
> Do we need a whip-round to get some additional memory?
I doubt money is the problem, it isn't like this is a pauper's hobby.
Though I would be curious to know what technical limitation it might be.
--
atp
"A motorcycle is a bicycle with a pandemo
On 24 May 2017, at 21:48, Sebastian Kuzminsky wrote:
> On 05/24/2017 02:20 PM, Bengt Sjölund wrote:
>> And again forum is down, what is going on?
>>
>> Anybody having insight in what is happening?
>>
>>
>> Cheers
>>
>> Bengt
>
> The forum currently works for me.
>
> We've been monitoring th
Thanks for the update.
Hope you can find a solution to this annoying problem.
Keep up the fine work that is much appreciated.
Cheers
Bengt
Den 2017-05-24 kl. 22:48, skrev Sebastian Kuzminsky:
> On 05/24/2017 02:20 PM, Bengt Sjölund wrote:
>> And again forum is down, what is going on?
>>
>> Anyb
On 05/24/2017 02:20 PM, Bengt Sjölund wrote:
> And again forum is down, what is going on?
>
> Anybody having insight in what is happening?
>
>
> Cheers
>
> Bengt
The forum currently works for me.
We've been monitoring the forum more closely lately, to try to track
down the flakiness. It seems t
And again forum is down, what is going on?
Anybody having insight in what is happening?
Cheers
Bengt
Den 2017-05-10 kl. 08:50, skrev Bengt Sjölund:
> And down again.
>
> Cheers
> Bengt
>
>
> Den 2017-05-09 kl. 15:58, skrev John Thornton:
>> I had to power cycle it this morning around 5am cent
outh = I'm fine too.
So the proposal of "donate button" is dead.
Regards
Giorgio
kurt message:
Da: Kurt Jacobson
Inviato: mercoledì 10 maggio 2017 23.24
A: Enhanced Machine Controller (EMC)
Oggetto: Re: [Emc-users] Forum down?
https://youtu.be/MH7KYmGnj40
well on this side of the pond, and I keep forgetting this list
goes anyplace you can get an internet connection. My bad and fading
memory at play.
>
> Da: Gene Heskett
> Inviato: mercoledì 10 maggio 2017 12.52
> A: emc-users@lists.sourceforge.net
>
ok. Many thanks I did a good laugh in addition it was a lot that I did not
see anything about Star Trek
giorgio
Da: Kurt Jacobson
Inviato: mercoledì 10 maggio 2017 23.24
A: Enhanced Machine Controller (EMC)
Oggetto: Re: [Emc-users] Forum down?
https
__
> Da: Gene Heskett
> Inviato: mercoledì 10 maggio 2017 12.52
> A: emc-users@lists.sourceforge.net
> Oggetto: Re: [Emc-users] Forum down?
>
> On Wednesday 10 May 2017 03:49:24 giorgio foga wrote:
>
> > Renew my ideas to add "donate" b
o: Re: [Emc-users] Forum down?
On Wednesday 10 May 2017 03:49:24 giorgio foga wrote:
> Renew my ideas to add "donate" button in top of forum .I know many
> give a lot to the forum every day others instead like me much
> less ... and we are in many ... maybe in this wa
;
>
> regards
>
> Giorgio
>
>
>
> Da: Bengt Sjölund
> Inviato: mercoledì 10 maggio 2017 08.50
> A: Enhanced Machine Controller (EMC)
> Oggetto: Re: [Emc-users] Forum down?
>
> And down again.
>
> Cheers
> Bengt
>
d
Inviato: mercoledì 10 maggio 2017 08.50
A: Enhanced Machine Controller (EMC)
Oggetto: Re: [Emc-users] Forum down?
And down again.
Cheers
Bengt
Den 2017-05-09 kl. 15:58, skrev John Thornton:
> I had to power cycle it this morning around 5am central time.
>
> JT
>
>
> On 5/9/2017
And down again.
Cheers
Bengt
Den 2017-05-09 kl. 15:58, skrev John Thornton:
> I had to power cycle it this morning around 5am central time.
>
> JT
>
>
> On 5/9/2017 7:24 AM, Sebastian Kuzminsky wrote:
>> It's up from here.
>>
>> http://isup.me/forum.linuxcnc.org
>>
>>
>> On May 9, 2017 1:49:45 A
On Tuesday 09 May 2017 10:11:44 John Thornton wrote:
> Try again Gene, I think I fixed your account.
>
> JT
>
I'll try again before the day is fini.
I've found some head scratching info about my py/lathe failures.
Andy found the exact source code line that is spitting out the error
message I am
Try again Gene, I think I fixed your account.
JT
On 5/9/2017 8:55 AM, Gene Heskett wrote:
> On Tuesday 09 May 2017 08:24:20 Sebastian Kuzminsky wrote:
>
>> It's up from here.
> Yup, but I can't sign up, then login, says my username is my email
> address. So plz nuke anything associated with ghe
I had to power cycle it this morning around 5am central time.
JT
On 5/9/2017 7:24 AM, Sebastian Kuzminsky wrote:
> It's up from here.
>
> http://isup.me/forum.linuxcnc.org
>
>
> On May 9, 2017 1:49:45 AM MDT, "Bengt Sjölund" wrote:
>> And down again!
>>
>> What is it with the forum that goes do
er (EMC)"
Sent: Tuesday, May 9, 2017 3:49:45 AM
Subject: Re: [Emc-users] Forum down?
And down again!
What is it with the forum that goes down very often?
Cheers
Bengt
Den 2017-04-30 kl. 19:58, skrev Jon Elson:
> On 04/29/2017 04:26 PM, Jon Elson wrote:
> And, it seems to be back
On Tuesday 09 May 2017 08:24:20 Sebastian Kuzminsky wrote:
> It's up from here.
Yup, but I can't sign up, then login, says my username is my email
address. So plz nuke anything associated with ghesk...@shentel.net or
gene1934, and I'll try again.
Initially the first thing it wanted was my ema
It's up from here.
http://isup.me/forum.linuxcnc.org
On May 9, 2017 1:49:45 AM MDT, "Bengt Sjölund" wrote:
>And down again!
>
>What is it with the forum that goes down very often?
>
>Cheers
>Bengt
>
>
>Den 2017-04-30 kl. 19:58, skrev Jon Elson:
>> On 04/29/2017 04:26 PM, Jon Elson wrote:
>> And
And down again!
What is it with the forum that goes down very often?
Cheers
Bengt
Den 2017-04-30 kl. 19:58, skrev Jon Elson:
> On 04/29/2017 04:26 PM, Jon Elson wrote:
> And, it seems to be back up!
>
>Thanks,
>
> Jon
>
> -
On 04/29/2017 04:26 PM, Jon Elson wrote:
And, it seems to be back up!
Thanks,
Jon
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_
Is it maybe so that the forum has been attacked by spam robots?
The Swedish elektronikforumet.com was attacked earlier this week by 2
robots and managed
to spit out garbage messages every 10 seconds for couple of hours before
sysadmin got hold of this.
I sincerely hope that this is not the case
On 04/29/2017 03:40 PM, andy pugh wrote:
> On 29 April 2017 at 21:24, Bengt Sjölund wrote:
>> unable to log since afternoon local time
> http://downforeveryoneorjustme.com/forum.linuxcnc.org
>
> I also can't get in.
>
Ah, yes, the FORUM is down, the rest of the web site is up.
Jon
--
And I promise it was not my fualt this time. ;)
Kurt Jacobson
505-303-1933
Sent from Mobile
On Apr 29, 2017 4:44 PM, "andy pugh" wrote:
> On 29 April 2017 at 21:24, Bengt Sjölund wrote:
> > unable to log since afternoon local time
>
> http://downforeveryoneorjustme.com/forum.linuxcnc.org
>
> I
On 29 April 2017 at 21:24, Bengt Sjölund wrote:
> unable to log since afternoon local time
http://downforeveryoneorjustme.com/forum.linuxcnc.org
I also can't get in.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, dar
... but it is not my intention to oppose Nobody
>>>> with this proposal.
>>>>
>>>>
>>>> regards
>>>>
>>>> giorgio
>>>>
>>>>
>>>>
>>>> Da: Bengt Sjö
consumption ... 2USD of annual donation is nothing to worry about
> >> getting everyone in touch ... but it is not my intention to oppose Nobody
> >> with this proposal.
> >>
> >>
> >> regards
> >>
> >> giorgio
> >>
> >>
> &
ion is nothing to worry about
>> getting everyone in touch ... but it is not my intention to oppose Nobody
>> with this proposal.
>>
>>
>> regards
>>
>> giorgio
>>
>>
>> ____
>> Da: Bengt Sjölund
>>
>
>
> regards
>
> giorgio
>
>
>
> Da: Bengt Sjölund
> Inviato: giovedì 20 aprile 2017 12.35
> A: Enhanced Machine Controller (EMC)
> Oggetto: [Emc-users] Forum down?
>
ose Nobody with this
proposal.
regards
giorgio
Da: Bengt Sjölund
Inviato: giovedì 20 aprile 2017 12.35
A: Enhanced Machine Controller (EMC)
Oggetto: [Emc-users] Forum down?
Forum down, anybody know what has happened?
Ch
ose Nobody with this
proposal.
Regards
giorgio
Da: Bengt Sjölund
Inviato: giovedì 20 aprile 2017 12.35
A: Enhanced Machine Controller (EMC)
Oggetto: [Emc-users] Forum down?
Forum down, anybody know what has happened?
Ch
Forum down, anybody know what has happened?
Cheers
Bengt
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
And it's up. Some servers go up and down so much they're like that Venga Boys
song from 1999.
From: andy pugh
To: Enhanced Machine Controller (EMC)
Sent: Monday, January 16, 2017 12:15 PM
Subject: Re: [Emc-users] Forum Down?
On 16 January 2017 at 1
> Sent: Monday, January 16, 2017
> 12:48:16 PM
> Subject: Re: [Emc-users] Forum Down?
>
> On 01/16/2017 07:45 AM, Todd Zuercher wrote:
> > Did the Linuxcnc Forum page get hacked, or is it just down for
> &
The forum's console showed "hung task" messages about apache2. I rebooted it.
Unfortunately the messages were not in kernel.log after reboot, so I don't know
what else went wrong.
This occurrence is unusual. I upgraded the kernel on January 11, so hopefully
this is not a new bug in the new kerne
On 01/16/2017 12:46 PM, Mark Johnsen wrote:
> I tried this link: https://forum.linuxcnc.org/
>
> And it's telling me site can't be reached. Here is the text from the error
> webpage:
>
>
OHHH! I just brought up the LinuxCNC main page, which still
works.
The forum does not work for me, either.
w
On 16 January 2017 at 18:40, Todd Zuercher
wrote:
> Still doesn't work here. (Hasn't since sometime yesterday evening.)
http://downforeveryoneorjustme.com/forum.linuxcnc.org
Says it is down.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed
I tried this link: https://forum.linuxcnc.org/
And it's telling me site can't be reached. Here is the text from the error
webpage:
forum.linuxcnc.org took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIM
Still doesn't work here. (Hasn't since sometime yesterday evening.)
- Original Message -
From: "Jon Elson"
To: "Enhanced Machine Controller (EMC)"
Sent: Monday, January 16, 2017 12:48:16 PM
Subject: Re: [Emc-users] Forum Down?
On 01/16/2017 07:45 AM,
It has been down for me all morning and is still down at 1:15pm eastern.
I had about 30 tabs open with the forum in the wee hours, maybe I did it in!
Kurt
On Mon, Jan 16, 2017 at 12:48 PM, Jon Elson wrote:
> On 01/16/2017 07:45 AM, Todd Zuercher wrote:
> > Did the Linuxcnc Forum page get hacked
On 01/16/2017 07:45 AM, Todd Zuercher wrote:
> Did the Linuxcnc Forum page get hacked, or is it just down for maintenance?
>
Looks OK to me, about noon central US time.
Jon
--
Check out the vibrant tech community on one o
Did the Linuxcnc Forum page get hacked, or is it just down for maintenance?
--
Todd Zuercher
mailto:zuerc...@embarqmail.com
--
Deve
43 matches
Mail list logo