- Original Message -
From: Alan Condit [EMAIL PROTECTED]
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Installing a second parallel port
Date: Thu, 12 Jun 2008 21:36:54 -0700
Aaron,
Since you indicated that you are adding a second port you need both
ports in your config
aaron Moore [EMAIL PROTECTED] writes:
Alan
Thanks for reply.
I am using steppers, so do I add my read and writes to the servo thread or the
base
thread?
My .hal file still has all the original configuration lines in, which I know
work... will
it run once I make these changes or is
On Fri, 2008-06-13 at 17:07 +, aaron Moore wrote:
Alan
Thanks for reply.
I am using steppers, so do I add my read and writes to the servo thread or
the base
thread?
The step (and direction) pulses that steppers or step/direction servo
and stepper controllers use, need to be very fast,
PROTECTED]
Date: Wednesday2008June 11 Wednesday2008June 111:48:15 PM PDT
To: EMC userslist emc-users@lists.sourceforge.net
Subject: [Emc-users] Installing a second parallel port
Reply-To: Enhanced Machine Controller \(EMC\) emc-
[EMAIL PROTECTED]
Hi
Can some one tell me what I
On Thu, 2008-06-12 at 06:11 +, aaron Moore wrote:
Hi
You guys are going to haveto hold my hand here
I run lspci -v and I get..
:00:06.0 Parallel controller: Timedia Technology Co Ltd: Unknown device
7268 (rev 01) (prog-if 02 [ECP])
Subsystem: Timedia Technology Co Ltd:
@lists.sourceforge.net
Subject: Re: [Emc-users] Installing a second parallel port
Date: Thu, 12 Jun 2008 00:56:00 -0700
On Thu, 2008-06-12 at 06:11 +, aaron Moore wrote:
Hi
You guys are going to haveto hold my hand here
I run lspci -v and I get..
:00:06.0 Parallel controller: Timedia
On Thu, 2008-06-12 at 08:42 +, aaron Moore wrote:
Thanks or very detailed reply. I will try it later today. One thing...I am
using steppers, do I need to run the functions for the servo threads?
Thanks again
Aaron
If you are going to use your parport to drive the step and direction
Wallace [EMAIL PROTECTED]
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Installing a second parallel port
Date: Thu, 12 Jun 2008 00:56:00 -0700
On Thu, 2008-06-12 at 06:11 +, aaron Moore wrote:
Hi
You guys are going to haveto hold my hand
aaron Moore wrote:
Kirk
I have added..
loadrt hal_parport cfg=0x9000
addf parport.0.read servo-thread
addf parport.0.write servo-thread
to my hal file (hopefully in the right places). Can I not configure the pins
through the step config wizard?
No, you can't use stepconf
This is where Stepconf can help the someone less versed in the config files
though - you can make multiple machine setups and then go through the .hal
and .ini files and marry the two together to get the results you want
without really having to know the details of the hal and ini files.
I
?
Aaron
- Original Message -
From: Kirk Wallace [EMAIL PROTECTED]
To: Enhanced Machine Controller (EMC) emc-
[EMAIL PROTECTED]
Subject: Re: [Emc-users] Installing a second parallel port
Date: Thu, 12 Jun 2008 00:56:00 -0700
On Thu, 2008-06-12 at 06:11 +, aaron Moore wrote:
Hi
You guys
hope that helps!
--
Predictions Are Difficult.Especially When They Are About The Future
Niels Bohr
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of aaron Moore
Sent: Wednesday, June 11, 2008 3:48 PM
To: EMC userslist
Subject: [Emc-users] Installing
aaron Moore wrote:
Hi
Can some one tell me what I need to do to install a second parallel port
apart from physically plugging it into the computer or will it
just 'plug and play'
Thanks for any help in this.
Aaron
Check back in the archives to about the sixth (five days ago).
userslist emc-users@lists.sourceforge.net
Subject: [Emc-users] Installing a second parallel port
Reply-To: Enhanced Machine Controller \(EMC\) emc-
[EMAIL PROTECTED]
Hi
Can some one tell me what I need to do to install a second parallel
port apart from physically plugging it into the computer
14 matches
Mail list logo