Thanks a lot for all those links and information. I'm not sure if I
could handle DIY CNC. The reason I look at Ohmikron and Xylotex systems
is their completeness and low price. Are there information about
complete DIY CNC systems based on servos and for low knowledge level
person or with down t
On Thu, 2008-06-19 at 08:36 -0500, Jeff Epler wrote:
> No. deskcnc uses a proprietary protocol to communicate with its external
> box and is not compatible with emc2.
>
> This system plus suitable motors is what the earlier poster may have had
> in mind:
> http://pico-systems.com/smallpwm.html
>
On Thu, 2008-06-19 at 01:33 -0400, Sergey Izvoztchikov wrote:
> Documentation on Ohmikron's parallel interface in on separate page
> dedicated to PPT1006 . Follow detail links from SDS0707's page
Wow, I had a hard time finding that one. I usually look for a visual cue
(icon) for links, not a keyw
No. deskcnc uses a proprietary protocol to communicate with its external
box and is not compatible with emc2.
This system plus suitable motors is what the earlier poster may have had
in mind:
http://pico-systems.com/smallpwm.html
Jeff
Documentation on Ohmikron's parallel interface in on separate page
dedicated to PPT1006 . Follow detail links from SDS0707's page
When you mentioned "brushed DC servo system" were you talking about
IMService's DeskCNC ? At the moment it's over my budged. What would be
advantage(s) of it over CNC
On Wed, 2008-06-18 at 11:44 -0400, Sergey Izvoztchikov wrote:
> I had couple direct emails with Phil. He wasn't willing to provide
> more details then on his web site. SDS accepts control signals over
> parallel port and seems to use Xylotex like mapping of pins. Phil
> said it would worm fine with
I had couple direct emails with Phil. He wasn't willing to provide
more details then on his web site. SDS accepts control signals over
parallel port and seems to use Xylotex like mapping of pins. Phil
said it would worm fine with EMC, but I have no idea how easy or
difficult would it be to configur
On Tue, 2008-06-17 at 22:54 -0400, Sergey Izvoztchikov wrote:
> Hello,
>
> I've recently joined this group. Going CNC direction with my
> Sherline lathe and mill. Could not find much info about support
> for Ohmikron SDS0707 CNC control system under EMC or EMC2.
>
> Are there any happy user of th
Hello,
I've recently joined this group. Going CNC direction with my
Sherline lathe and mill. Could not find much info about support
for Ohmikron SDS0707 CNC control system under EMC or EMC2.
Are there any happy user of this CNC driver under EMC/EMC2 ?
How hard was it to configure EMC and is there
