On Thu, 20 Feb 2020 at 21:38, Jeff Johnson wrote:
> Ok.Thanks guys I see there are simpler ways to go now.
There is something to be said for using tools that are familiar.
is the table already motorised? Does is have an existing drive? What
control signals does that drive expect?
--
atp
"A mo
Ok.Thanks guys I see there are simpler ways to go now.
I'm a machinist forced into being a control guy at times.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
___
Emc-users mailing list
Emc-users@lists.sourceforg
son
Sent: Thursday, February 20, 2020 2:09 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Rotary Head
[EXTERNAL EMAIL] Be sure links are safe.
Correct Todd..One is a Milacron 850SX and the Okuma has a Numatix control
someone retrofitted before I got it.
I think maybe some of th
com]
> Sent: Thursday, February 20, 2020 10:24 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Rotary Head
>
>
>
> > On 20 Feb 2020, at 14:25, Jeff Johnson wrote:
> >
> >
> > Any thoughts or ideas on the best way to pull this off? PC? RPi4? W
)828-2105ext. 2031
-Original Message-
From: Andy Pugh mailto:bodge...@gmail.com> >
Sent: Thursday, February 20, 2020 10:24 AM
To: Enhanced Machine Controller (EMC) mailto:emc-users@lists.sourceforge.net> >
Subject: Re: [Emc-users] Rotary Head
[EXTERNAL EMAIL] Be su
On Thursday 20 February 2020 10:24:18 Andy Pugh wrote:
> > On 20 Feb 2020, at 14:25, Jeff Johnson
> > wrote:
> >
> >
> > Any thoughts or ideas on the best way to pull this off? PC? RPi4?
> > Which
>
> Why not add a 4th axis configuration to each machine that might use
> it? Then you can properly
Machine Controller (EMC)
Subject: Re: [Emc-users] Rotary Head
[EXTERNAL EMAIL] Be sure links are safe.
> On 20 Feb 2020, at 14:25, Jeff Johnson wrote:
>
>
> Any thoughts or ideas on the best way to pull this off? PC? RPi4? Which
Why not add a 4th axis configuration to each machine that
> On 20 Feb 2020, at 14:25, Jeff Johnson wrote:
>
>
> Any thoughts or ideas on the best way to pull this off? PC? RPi4? Which
Why not add a 4th axis configuration to each machine that might use it? Then
you can properly integrate the motion control?
You can actually do it with a single conf
Hello,
Owner and user of some big iron using Linux CNC. I am not a noob but close,
I started down this path 5-6 years ago and have hung Linux on three turning
centers and 1 Three axis mill.
With that being said I went through a steep learning curve on the first
machine and at the time had a ve