avy as a Machinery repairman (machinist). GO
>NAVY. Thanks AgainMR2 Nannie
>
> --- On Thu, 9/3/09, Mark Wendt (Contractor) wrote:
>
>
>From: Mark Wendt (Contractor)
>Subject: Re: [Emc-users] emc chess pawn part program
>To: "Enhanced Machine Controller (EMC)&q
Ron
>
>.-- On Thu, 9/3/09, Mark Wendt (Contractor) wrote:
>
>
>From: Mark Wendt (Contractor)
>Subject: Re: [Emc-users] emc chess pawn part program
>To: "Enhanced Machine Controller (EMC)"
>Date: Thursday, September 3, 2009, 9:23 AM
>
>
>Rondal,
>
>
On Thu, Sep 03, 2009 at 06:54:55PM -0700, Rondal Nannie wrote:
>
> I opened the ubuntu but couldnt locate the config files. I need alot
> of help.
Have you tried to run this on the command line?:
find ~ -name '*ini' -print
# Search user's home directory.
I
>
>From: Jake Anderson
>Subject: Re: [Emc-users] emc chess pawn part program
>To: "Enhanced Machine Controller (EMC)"
>Date: Wednesday, September 2, 2009, 5:11 PM
>
>
>On 03/09/09 02:10, Jon Elson wrote:
> > Rondal Nannie wrote:
> >
> >> Gene I
) wrote:
From: Mark Wendt (Contractor)
Subject: Re: [Emc-users] emc chess pawn part program
To: "Enhanced Machine Controller (EMC)"
Date: Thursday, September 3, 2009, 9:23 AM
Rondal,
Wouldn't hurt to have at least 512 MB memory, but memory is
so cheap these days, yo
et a faster machine. You
>say at least 1 gb processor? Can you think of Anything else that I
>would need? Thanks for the help. Ron
>
>--- On Wed, 9/2/09, Jake Anderson wrote:
>
>
>From: Jake Anderson
>Subject: Re: [Emc-users] emc chess pawn part program
>To: &quo
Anderson
Subject: Re: [Emc-users] emc chess pawn part program
To: "Enhanced Machine Controller (EMC)"
Date: Wednesday, September 2, 2009, 5:11 PM
On 03/09/09 02:10, Jon Elson wrote:
> Rondal Nannie wrote:
>
>> Gene I ran a test and it is running at 380.4MHz.
On 03/09/09 02:10, Jon Elson wrote:
> Rondal Nannie wrote:
>
>> Gene I ran a test and it is running at 380.4MHz. (The Compaq 5185 only
>> supports up to 348MB of Ram) It seems slow. It wanted to update EMC with
>> 406 updates and now that is updated. It probably needs a gravity check off
Rondal Nannie wrote:
> Gene I ran a test and it is running at 380.4MHz. (The Compaq 5185 only
> supports up to 348MB of Ram) It seems slow. It wanted to update EMC with
> 406 updates and now that is updated. It probably needs a gravity check off
> the side of the table...? Thanks for the he
On Wednesday 02 September 2009, Rondal Nannie wrote:
>Gene I ran a test and it is running at 380.4MHz. (The Compaq 5185 only
> supports up to 348MB of Ram) It seems slow. It wanted to update EMC with
> 406 updates and now that is updated. It probably needs a gravity check
> off the side of the
, Gene Heskett wrote:
From: Gene Heskett
Subject: Re: [Emc-users] emc chess pawn part program
To: "Enhanced Machine Controller (EMC)"
Date: Tuesday, September 1, 2009, 2:28 PM
On Tuesday 01 September 2009, Jake Anderson wrote:
>On 01/09/09 12:43, Rondal Nannie wrote:
>>
On Tuesday 01 September 2009, Jake Anderson wrote:
>On 01/09/09 12:43, Rondal Nannie wrote:
>> Steve
>> The computer is a compaq 252 MB ram 82% free , 32 bit file system,
>> 32 bit virtual memory, disk compression not installed. C drive
>> capacity 2.09 GB 117 mb free space, D drive 970
it just will not load for some
> reason. Thanks in advance. Ron
>
> --- On Mon, 8/17/09, robert wrote:
>
>
> From: robert
> Subject: Re: [Emc-users] emc chess pawn part program run request
> To: "Enhanced Machine Controller (EMC)"
> Date: Monday, August 17, 20
On 01/09/09 12:43, Rondal Nannie wrote:
>
> Steve
> The computer is a compaq 252 MB ram 82% free , 32 bit file system, 32
> bit virtual memory, disk compression not installed. C drive capacity 2.09
> GB 117 mb free space, D drive 970 MB free space Capacity 1.85 GB.The
> EMC is pa
Research the emc archives. I believe SWPadnos had me load tofrodos on my
none-net machine a few months ago. Goslowjimbo.
> Date: Mon, 31 Aug 2009 10:19:04 -0400
> From: spad...@sover.net
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] emc chess pawn part progr
On Monday 31 August 2009, Rondal Nannie wrote:
>HelloI am working on getting the computer on line and I will get the
> speed and size of the computer. Thanks for the help. Remember to take it
> easy on the new bee...Thanks Rondal
>
>--- On Mon, 8/31/09, Gene Heskett wrote:
>
>
Gahh! Another
helps out Rondal
--- On Mon, 8/31/09, Stephen Wille Padnos wrote:
From: Stephen Wille Padnos
Subject: Re: [Emc-users] emc chess pawn part program
To: "Enhanced Machine Controller (EMC)"
Date: Monday, August 31, 2009, 2:19 PM
Mark Wendt (Contractor) wrote:
>[snip]
>
>Gene,
Hello I am working on getting the computer on line and I will get the speed
and size of the computer. Thanks for the help. Remember to take it easy on the
new bee...Thanks Rondal
--- On Mon, 8/31/09, Gene Heskett wrote:
From: Gene Heskett
Subject: Re: [Emc-users] emc chess pawn part
On Monday 31 August 2009, Mark Wendt (Contractor) wrote:
>At 09:54 AM 8/31/2009, you wrote:
>>On Monday 31 August 2009, Mark Wendt (Contractor) wrote:
>> >Rondal,
>> >
>> > There's also a nifty little program on most *nix boxen
>> >called "dos2unix." The syntax to use this command line uti
At 10:19 AM 8/31/2009, you wrote:
>Mark Wendt (Contractor) wrote:
>
> >[snip]
> >
> >Gene,
> >
> > I agree on the networking. I was just tossing the dos2unix
> >utility up as a quick and dirty way to confirm that it was a Winders
> >vs *nix file formatting issue.
> >
> >
>It's unlikely tha
On Mon, 2009-08-31 at 09:54 -0400, Gene Heskett wrote:
> If Rondal runs a net cable to it, he will wonder how he ever got by without
> it. Just the ability to fire up an IRC client, and send it off to
> irc.freenode.net & /join #emc, and actually have an excellent chance of
> talking directly
Mark Wendt (Contractor) wrote:
>[snip]
>
>Gene,
>
> I agree on the networking. I was just tossing the dos2unix
>utility up as a quick and dirty way to confirm that it was a Winders
>vs *nix file formatting issue.
>
>
It's unlikely that this is the problem. I believe that EMC2-2.2.3 n
At 09:54 AM 8/31/2009, you wrote:
>On Monday 31 August 2009, Mark Wendt (Contractor) wrote:
> >Rondal,
> >
> > There's also a nifty little program on most *nix boxen
> >called "dos2unix." The syntax to use this command line utility is
> >dos2unix . There are a number of
> >qualifiers you
On Monday 31 August 2009, Mark Wendt (Contractor) wrote:
>Rondal,
>
> There's also a nifty little program on most *nix boxen
>called "dos2unix." The syntax to use this command line utility is
>dos2unix . There are a number of
>qualifiers you can add to the command. Check "man dos2unix".
e computer is not connected to
> the internet right now because it was a older computer and I was
> only going to use it to run the lathe. I downloaded emc off of a cd. Thanks
> Ron
>
>--- On Mon, 8/31/09, Gene Heskett wrote:
>
>
>From: Gene Heskett
>Subject: Re
On Sunday 30 August 2009, Rondal Nannie wrote:
>Gene
>I think you may be right about that. I thought that I went into a
> file that was downloaded with emc . I will try to get the computer on line
> and try your way. The computer is not connected to the internet right now
> because it was a
run the lathe. I
downloaded emc off of a cd. Thanks Ron
--- On Mon, 8/31/09, Gene Heskett wrote:
From: Gene Heskett
Subject: Re: [Emc-users] emc chess pawn part program
To: "Enhanced Machine Controller (EMC)"
Date: Monday, August 31, 2009, 1:18 AM
On Sunday 30 August 2009, Ron
that exact reason, my emc box has a network card, and a hunk of cat5
cable strung across the back yard to the shop building the emc driven machine
is living in.
>--- On Sun, 8/30/09, Frank Tkalcevic wrote:
>
>
>From: Frank Tkalcevic
>Subject: Re: [Emc-users] emc chess pawn part
Subject: Re: [Emc-users] emc chess pawn part program
To: "'Enhanced Machine Controller (EMC)'"
Date: Sunday, August 30, 2009, 10:26 PM
One thing I forgot to ask... You say it loads, but the hourglass still
remains? Can you click on buttons and menu items? I've had a prob
Original Message-
> From: Rondal Nannie [mailto:rl...@sbcglobal.net]
> Sent: Sunday, 30 August 2009 9:40 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] emc chess pawn part program
>
> Frank It starts to load the program and the hour glass just
>
posted
below). Copy that and share it here.
A before and after shot may help us understand the problem.
Frank
> -Original Message-
> From: Rondal Nannie [mailto:rl...@sbcglobal.net]
> Sent: Sunday, 30 August 2009 9:40 AM
> To: Enhanced Machine Controller (EMC)
> Subject
Frank It starts to load the program and the hour glass just stays on screen
and continues forever even after the program has loaded on the bottom screen.
Thanks Ron
--- On Sat, 8/29/09, Frank Tkalcevic wrote:
From: Frank Tkalcevic
Subject: Re: [Emc-users] emc chess pawn part program
To
e Controller (EMC)
> Subject: [Emc-users] emc chess pawn part program
>
> Hello I was wondering if anybody else has loaded and run
> this EMC example lathe pawn program? I tried to load it and
> it just will not load for some reason. Thanks in advance. Ron
>
> --- On Mon, 8/1
Hello I was wondering if anybody else has loaded and run this EMC
example lathe pawn program? I tried to load it and it just will not load for
some reason. Thanks in advance. Ron
--- On Mon, 8/17/09, robert wrote:
From: robert
Subject: Re: [Emc-users] emc chess pawn part program run
Rondal Nannie wrote:
> I do not know about that, I only removed the % sign on the end of the proram.
> Thanks for the response. Ron
>
> --- On Mon, 8/17/09, Ray Henry wrote:
>
> Is it possible that this is another case of editing a text file on
> another OS or editor that uses a different end of
> Rob I removed the % at the bottom of the program and it still acts like it
> is still loading something .
How do you determine that?
Once it's loaded there won't be anything different with AXIS, except you'll
have the file in the preview.
To run it, you just push the Run button on the top menu
I do not know about that, I only removed the % sign on the end of the proram.
Thanks for the response. Ron
--- On Mon, 8/17/09, Ray Henry wrote:
From: Ray Henry
Subject: Re: [Emc-users] emc chess pawn part program run request
To: "Enhanced Machine Controller (EMC)"
Date: Monday,
ething . It is running version 2.2 . Thanks Ron
>
> --- On Sun, 8/16/09, robert wrote:
>
>
> From: robert
> Subject: Re: [Emc-users] emc chess pawn part program run request
> To: "Enhanced Machine Controller (EMC)"
> Date: Sunday, August 16, 2009, 11:14 PM
&
Rob I removed the % at the bottom of the program and it still acts like it is
still loading something . It is running version 2.2 . Thanks Ron
--- On Sun, 8/16/09, robert wrote:
From: robert
Subject: Re: [Emc-users] emc chess pawn part program run request
To: "Enhanced Machine Contr
hi ron
most files i open are just .txt files and emc reads them fine might be
something screwy in the txt file its not liking but not letting u know why.
i just saw there is a % at the end of the file try and remove it and see
what happens. let us know if it fixes it, or not
what version of EMC
file? The screen
is still in manual screen and I cant get it to go to the MDI screen because it
is still loading for some reason. Thanks Ron
--- On Sun, 8/16/09, robert wrote:
From: robert
Subject: Re: [Emc-users] emc chess pawn part program run request
To: "Enhanced Machine Controller
Hi ron
im guessing you got it loaded if u can run single lines of code at a time.
if not just copy all the content alex linked to, save it into a blank
txt file
then do file,open, locate the new file (may have to change from *.ngc to
*. all files in open window its at bottom of window)
if the p
Hello Could someone Please tell me the steps to locate the Pawn program file,
load it into the g file as a program and execute the run so that I can see the
tool path in action. Thanks I'm new at this and getting frustrated. I thought
I had it the other day but could only get one line at
hine Controller (EMC)"
Sent: Monday, August 10, 2009 3:37 AM
Subject: [Emc-users] emc chess pawn part program request
Hello I have a emco compact 5 cnc with emc just configuredand I was
wondering if anybody has the program saved for a chess pawn part. I would
like to use this for a test p
Hello I have a emco compact 5 cnc with emc just configuredand I was
wondering if anybody has the program saved for a chess pawn part. I would like
to use this for a test program. Thanks in advance Ron
--- On Sun, 8/9/09, robert wrote:
From: robert
Subject: Re: [Emc-users] Servo tuning
45 matches
Mail list logo