J. Grant [EMAIL PROTECTED] writes:
Perhaps my situation is similar to yours.
[snip]
Do you know of any HOWTOS on this issue? I am considering writing one,
as I can not find one.
I don't know of any. Last I checked -- probably close to a year ago --
everything dealing with japanese in linux
Don't know if this helps, but while trying to make Mandrake7.0 speak
Korean I ran across this site. The guy is knee deep in
internationalizing linux to speak Japanese.
http://tlug.linux.or.jp/craigoda/writings/linux-nihongo/
James
PS to get some of the Korean working I borrowed heavily from a
Lee,
I ran into some problems with another Asus board and it was due to
a memory stick that wouldn't run at 133mhz (runs fine at 100mhz on my
old mobo) simular boot problems. The tech at the store mentioned in
passing that certain (he couldn't remember models) Asus boards would
work with the
Hi,
Postfix refuses to send email from one computer on my network to another.
It simply sends me repeated emails that say that the mail could not be delivered and
will be retried because the host could not be found.
These computers (cups166.reisersun and tux350.reisersun) are right next to
Hi,
I was reading in man xfs:
-port tcp_port
Specifies the TCP port number on which the server
will listen for connections. The default port
number is 7100.
I was just wondering why Mandrake 8.x runs the X Font Server on port -1, and
not
El jue, 17-01-2002 a las 06:51, Ric Tibbetts escribió:
Salvatore Enrico Indiogine wrote:
Greetings!
Each time I try to print an email from Evolution 1.0.1 the mail
component crashes.
Anyone else ran into this problem?
Bigger question:
How did you get it installed? I tried to
On Thu, 17 Jan 2002, pesarif wrote:
Postfix refuses to send email from one computer on my network to another.
It simply sends me repeated emails that say that the mail could not be delivered and
will be retried because the host could not be found.
These computers (cups166.reisersun and
Chris Spackman wrote:
[snip]
I would be willing to help a bit with getting Japanese mandrake going,
let me know if you want some help on the howto.
They have control centre etc in english and japanese, seems to change
the setup when i log out of kde after chainging, rather fancy eh?
J. Grant [EMAIL PROTECTED] writes:
They have control centre etc in english and japanese, seems to change
the setup when i log out of kde after chainging, rather fancy eh?
Well, it is a good start at least.
--
Chris Spackman
gpg: 9B6B 860E 7C06 787F 366F 5D3E 7152 DCB2 FC51 51B9
Want
Hello everybody,
I' ve installed mdk 8.1 on a motherboard
PCCHIPS 810LMR.
This mobo is a all-in-one mobo.
The integrated ethernet card works fine.
The integrated sound card, a SiS 7018,
is configured by mdk 8.1 but when i do
aplay file.wav I obtain:
Using soundcard Sis 7018 PCI Audio at
start portsentry on the box, and tell it to cover the ssh port.. and then
add all the ip's you would use to the portsentry.ignore file.
Then anyone scanning your ssh port would be blocked by ipchains/iptables,
except you, so you can connect to your hearts content without worrying about
getting
Lee,
What /exactly/ do you mean by boot? Does the BIOS at least get started
(hear any beeps?) and the video show something, or do you mean that LM
will not boot once you have seen LILO? I don't have this mobo, but I
have a KT266A based board and it took me several hours to work out how
to
Tuesday... Ric Tibbetts was spotted running through the streets shrieking:
Ok gang, this is WAY off topic. :)
Somebody convince me about something:
snip
I feel your pain ;-)
Quake II was the last release with a 'story line' included. I'm sort
of hoping that a 'Quake IV' will emerge with a
Kaixo!
On Thu, Jan 17, 2002 at 05:06:35PM +0900, Chris Spackman wrote:
One thought --- have Mandrake specific tools like the control center
been localized for Japanese yet?
Yes; most of them.
You can see the advancement of the translations of our tools
for various languages at the page
Kaixo!
On Thu, Jan 17, 2002 at 01:57:24PM +0900, J. Grant wrote:
However the japanese support in mdk8.1 is broken, not only do none of
the kanji get displayed properly but kinput for wnn is not installed by
default!
Yes, that was indeed a very bad bug. It has been fixed in Cooker some
Larry Varney wrote:
How soon we forget: OS/2. Well, not completely - my wrist pad says
Starting today, everything your computer has ever done, it will do
better. OS/2
I -still- know people who are big on Atari/Amiga's! smile
Larry Varney
Cold Spring, KY
http://w3.one.net/~lvarney
Hi!
Is there any text-based utility that does the same thing then MandrakeUpdate?
I really like MandrakeUpdate, but I have a few LM8.1 servers installed with
no X environment...
Any suggestions?
Thanx
-C
-
Charles Ouimet[EMAIL PROTECTED]
(514)
On Thu, 2002-01-17 at 07:31, Charles Ouimet wrote:
Hi!
Is there any text-based utility that does the same thing then MandrakeUpdate?
I really like MandrakeUpdate, but I have a few LM8.1 servers installed with
no X environment...
Any suggestions?
Thanx
-C
urpmi is the text-based
On Thu, 17 Jan 2002, Steve wrote:
I have a Solaris server at work running SSH-2.0-2.0.13 and lately I've
noticed weird addresses in the logs attempting to connect to the sshd
server. It seems that we have similar problems. Here are a few
examples of the log entries:
Dec 27 18:55:10
This MSI board defaults to 100 MHZ. So, unless the DDR stick is completely
bad...
I'll have to contact the vendor for more info, of course. Ahh, the joys of
upgrading.
At 12:24 AM 1/17/2002 -0800, James Sparenberg wrote:
Lee,
I ran into some problems with another Asus board and it was
Hi experts ..
When I trying to install windowsXP in one
computer with linux... how I can re-write the
master boot record... I suppose that windows
erase the m.b.r. like win9x ... ?
ro.
dgf, uchile
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
It won't boot at all so I can't even look at the BIOS.
At 10:41 PM 1/16/2002 -0500, gnerd wrote:
Lee,
Hate to be a doomsayer, but my brother has the power switch problem with
his motherboard. It works in windoze, but not Linux. His docs say it's
a motherboard designed specifically for
That is like I had with my board (Jetway 866ASU + 1GHz Athlon, upgraded
last weekend). In my case I had the CPU clock multiplier wrong. The
manual listed all the settings for the jumpers and I tried the lowest
(x5.0) and it failed. I took all the jumpers off (not even listed) and
now it works
Livin' in Linux is getting much easier nowadays, no need to scandisk,
defrag
(thx to reiserfs and ext3), restart, reinstall (when we got win crashed),
and
As I said ... my Win2K OS never crashes, and I've never had to re-install
the OS. In previous versions of Windows, especially the consumer
Nope. No beeps whatsover. No video display. Nothing. The CPU fan runs
though and I hear some noise from the drives as I normally do. The D-panel
diagnostic lights are all red. The manual says that combo of colors
indicates a bad CPU but when I talked to MSI tech support last week the
tech said if
On 17 Jan 02, at 7:17, Lee Roberts wrote:
Nope. No beeps whatsover. No video display. Nothing. The CPU fan runs
though and I hear some noise from the drives as I normally do. The D-panel
diagnostic lights are all red. The manual says that combo of colors
indicates a bad CPU but when I
Hello.
I would like to upgrade my home PC ( an old PentiumII running LM 7.2 )
I am considering buying an Athlon-XP-something.
Have you any recommendations about motherboards,
graphic cards, etc... ?
(I would like to stay with the 7.2, but I can move to the 8.1 if it is
really necessary)
Thanks.
install windows first, and then linux.
if linux is already installed, re-install lilo and add the windowz entry
to your lilo.conf
On Thu, 17 Jan 2002, rodrigo wrote:
Date: Thu, 17 Jan 2002 15:08:15 -0300
From: rodrigo [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [expert] windows
El jue, 17-01-2002 a las 19:08, rodrigo escribió:
Hi experts ..
When I trying to install windowsXP in one
computer with linux... how I can re-write the
master boot record... I suppose that windows
erase the m.b.r. like win9x ... ?
ro.
dgf, uchile
For LM 8.1:
- boot from rescue
El jue, 17-01-2002 a las 17:54, Oscar escribió:
El jue, 17-01-2002 a las 19:08, rodrigo escribió:
Hi experts ..
When I trying to install windowsXP in one
computer with linux... how I can re-write the
master boot record... I suppose that windows
erase the m.b.r. like win9x ... ?
hello --
i'd like to rebuild my kernel but was surprised to find that the kernel
source is not in /usr/src/linux.
i have Mandrake 8.1; i tried looking for it in the 3 cd's using the software
manager but couldn't find it.
does anybody know for sure if the kernel source is in the cd-set or not?
Oscar wrote:
El jue, 17-01-2002 a las 06:51, Ric Tibbetts escribió:
Salvatore Enrico Indiogine wrote:
Greetings!
Each time I try to print an email from Evolution 1.0.1 the mail
component crashes.
Anyone else ran into this problem?
Bigger question:
How did you get
http://www.linux-mandrake.com/en/flists.php3
On Thu, 17 Jan 2002, work wrote:
Date: Thu, 17 Jan 2002 17:23:19 -
From: work [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: [expert] Japanese input in KDE
Could you please tell me how to un-register
i've looked at 'man xmodmap', to be honest all i can see are ways to get one
combination of keys to stand in for other combination of keys, i didn't see a
way to assign 'commands' to keys, am i missing something?
bascule
On Wednesday 16 January 2002 5:12 pm, you wrote:
So sprach »bascule« am
Ok how does the mod_frontpage-1.5.1-5.1mdk rpm fit into this?
Also I am just wanting to install the 2000 extensions not the 2002.
On Wed, 2002-01-16 at 16:20, Battista, JohnX wrote: All of this is found on the MSDN site.
And should be included in the TAR that is available for download.
Could you please tell me how to un-register to this list please
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Pablo Saratxaga
Sent: 17 January 2002 12:32
To: J. Grant
Cc: expert; [EMAIL PROTECTED]; [EMAIL PROTECTED];
[EMAIL PROTECTED]
Subject: Re:
Title: Message
You
asked:
-Original
Message- From: Robin Cook
[mailto:[EMAIL PROTECTED]] Sent: Wednesday,
January 16, 2002 1:52 PM To:
[EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: [expert] mod_frontpage and frontpage
extensions.Does anyone have the exact installation steps
I wonder if it is possible to add a windows NT
drive to the primary slave ide port that already
has windows NT on it, and add it to my lilo.conf
as a boot option?
Thanks
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I was wondering if there is a linux app that works with the net2phone
services or any program that does what net2phone does...
Thanks
Harold
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Thu, 17 Jan 2002, DelaCruz, Carlo wrote:
hello --
i'd like to rebuild my kernel but was surprised to find that the kernel
source is not in /usr/src/linux.
i have Mandrake 8.1; i tried looking for it in the 3 cd's using the software
manager but couldn't find it.
does anybody know for
Ok the mod_frontpage-1.5.1-5.2mdk want apache-1.3.22-1.2 and Mandrake
8.1 with current updates is only at apache-1.3.22-1.1. Tried a force
and nodeps but it still didn't work.
If you use the mod_frontpage do you still need the fp40-linux-tar.gz?
If so what is different in the fp40 setup from
Hi all,
I just downloaded the entire 8.1 update site, lock stock and barrel, and
burned it to a CD...
problem is that I don't know what to do with it now, I wanted to take it to
each server, and use it as a source for updating all my linux servers
running all over the country side..
but it
Use 'mod_frontpage-1.5.1-5.1mdk.i586.rpm' that is located under the
Mandrake 8.1 updates directory. This will correctly work with
apache-1.3.22-1.1 .
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems Administration Consultant
Web Spinners, University of West Florida
At
Strange, I have had a MSI KT266A board with an AthlonXP 1800 running on it
for ages now...
not a problem, other then getting linux to use it, and once I got that
sorted, all was well..
keep persevering.. MSI make good boards... I have had several of them,,
rgds
Frank
-Original
I wonder if it is possible to add a windows NT
drive to the primary slave ide port that already
has windows NT on it, and add it to my lilo.conf
as a boot option?
No. NT boots only from 1st primary partition on primary drive.
Want to buy your Pack or Services from MandrakeSoft?
Go to
El jue, 17-01-2002 a las 19:24, Franki escribió:
Hi all,
I just downloaded the entire 8.1 update site, lock stock and barrel, and
burned it to a CD...
problem is that I don't know what to do with it now, I wanted to take it to
each server, and use it as a source for updating all my linux
And the verdict is:
Well, I went over to the cooker site, and this time was able to track
down libgal10 (I swear, I looked before, and it wasn't there).
I dl'd that, and a few others (to satisfy some dependencies). In total,
I Upgraded, or installed the following packages:
Updates:
I guess I am still doing something wrong.
These are the rpms for apache that I have loaded. Are there any missing
or ones that conflict that shouldn't be loaded?
apache-1.3.22-1.1mdk
apache-common-1.3.22-1.1mdk
apache-conf-1.3.22-1.1mdk
apache-devel-1.3.22-1.1mdk
apache-manual-1.3.22-1.1mdk
At 07:17 AM 1/17/2002 -0700, you wrote:
Nope. No beeps whatsover. No video display. Nothing. The CPU fan runs
though and I hear some noise from the drives as I normally do. The D-panel
diagnostic lights are all red. The manual says that combo of colors
indicates a bad CPU but when I talked to MSI
At 05:19 PM 1/17/2002 +0100, you wrote:
Hello.
I would like to upgrade my home PC ( an old PentiumII running LM 7.2 )
I am considering buying an Athlon-XP-something.
Have you any recommendations about motherboards,
graphic cards, etc... ?
(I would like to stay with the 7.2, but I can move to the
did that solve a problem with gtkhtml ? because evolution 1 wont install
on my 8.1 because of that even if i update gtkhtml to a new version (dont
remember the version number right now.)
i cant also get it from ximian's installer because of that bug they
(still) have with rpm 4.0.3
tal.
On
Mandrake Update Robot. It's now included on the CD's so you should have it. I've used
it and found that it works well. You can even set it up as a cron job to work behind
the scenes... it will then e-mail root to tell you what it updated and when.
James
On Thu, 17 Jan 2002 08:31:08 -0500
Take a serious look at the Soyo Dragon Plus (SY-K7V Dragon Plus) with the
KT266A Chipset. This MOBO has the socket A for any of the newest and
I'm thinking of that one. Bit expensive, but supposedly well worth it.
Want to buy your Pack or Services from MandrakeSoft?
Go to
whats the proccess name ?
where do i call it from ?
On Thu, 17 Jan 2002, James Sparenberg wrote:
Date: Thu, 17 Jan 2002 12:19:31 -0800
From: James Sparenberg [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [expert] Text-based utility to replace
I'm not sure what problem with gtkhtml you're referring to, so I can't
say if it's solved. ;) Tell me what the problem is, and I'll check it
out. If it's a dependancy problem, then yes, you need to update gtkhtml,
and others.
As to the install. I got all the bits pieces off the Mandrake Cooker
Hello
I am trying to get a second zip drive to work my system (LM 8.1). The first
device is a parallel zip drive and works fine with ppa. The second one is
connected to scsi card, tekram 390-F. dmesg shows that 8.1 finds the scsi
card and the scsi zip but then the whole thing disappeared
On Thu, 17 Jan 2002 15:37:22 -0500
Mike Leone [EMAIL PROTECTED] wrote:
Take a serious look at the Soyo Dragon Plus (SY-K7V Dragon Plus) with the
KT266A Chipset. This MOBO has the socket A for any of the newest and
I'm thinking of that one. Bit expensive, but supposedly well worth it.
pesarif wrote:
Postfix refuses to send email from one computer on my network to another.
It simply sends me repeated emails that say that the mail could not be delivered and
will be retried because the host could not be found.
These computers (cups166.reisersun and tux350.reisersun) are
Mike Leone wrote:
Take a serious look at the Soyo Dragon Plus (SY-K7V Dragon Plus) with the
KT266A Chipset. This MOBO has the socket A for any of the newest and
I'm thinking of that one. Bit expensive, but supposedly well worth it.
While we are on the subject, is there a nice board for
I added the following line in crontab.conf
30 01 * * * root /usr/local/sbin/nabou
/var/babou/syslog.log 21
First of all, should /usr/local/sbin/nabou contain the
nabou executable file nabou, 'cause mine is in
/root/bin not in /usr/local/sbin/ as in the above line
in crontab
I also received
yes it is on the cds
ls ker* will find it cant rember which one.
using a stock kernel will break it!
Bend
- Original Message -
From: DelaCruz, Carlo [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 18, 2002 4:17 AM
Subject: [expert] where's the kernel source
hello --
On Thu, 17 Jan 2002 21:54:56 +
Tom Badran [EMAIL PROTECTED] wrote:
Mike Leone wrote:
Take a serious look at the Soyo Dragon Plus (SY-K7V Dragon Plus) with the
KT266A Chipset. This MOBO has the socket A for any of the newest and
I'm thinking of that one. Bit expensive, but
X-RebelTech Is Here: http://www.rebeltech.ca
MIME-Version: 1.0
Message-Id: [EMAIL PROTECTED]
Content-Transfer-Encoding: 8bit
just thought i would chime in my two cents worth...
two bad mobos is very odd. are you certain that your power supply is ok?
i had one die on me and it started to put
Hi,
Ihave exactly the same Notebook and the same problem
To use it Ihave :
1) installed Mandrake 8.0
2) installed Mandrake 8.1 making upgrade
3) select the old kernel 2.4.3 to start
The kernel 2.4.8 make a reset on the computer
just at the beginning ,
it shows 10 - 15 lines on the screen e
How often do you reboot your W2k machine? Not because it crashed or
anything, just because?
On Thursday 17 January 2002 10:29, Mike Leone wrote:
Livin' in Linux is getting much easier nowadays, no need to scandisk,
defrag
(thx to reiserfs and ext3), restart, reinstall (when we got win
Hello,
I just receive a new/used computer a compaq
Proliant 2500R. with this computer there was no operating system on
it. I need toknow if I need the smartstart software so I load Linux
mandrake 8.1 pro.
if I need this where can I download it or get a iso
image.
thanks Bill Nash.
My two cents to this:
I have not had to reboot or shutdown my system since getting it installed
and running the way I want it to be running.
This includes Win2k and WinXP.
I only shutdown on the weekends at work to save power company policy .
At home, my Win2k box runs 24/7, as does my Linux
William R. Nash wrote:
Hello,
I just receive a new/used computer a compaq Proliant 2500R. with this
computer there was no operating system on it. I need to know if I
need the smartstart software so I load Linux mandrake 8.1 pro.
if I need this where can I download it or get a iso
after linux install:
mkbootdisk --device /dev/fd0 `uname -r`
install windows
boot linux from floppy.
run lilo.
On Thu, 17 Jan 2002, rodrigo wrote:
Hi experts ..
When I trying to install windowsXP in one
computer with linux... how I can re-write the
master boot record... I suppose
Hi list ,
I have had some trouble compiling a libary called
Libpano12.so here is the output generated by
the shell
[root@localhost jason]# cd PTLinux
[root@localhost PTLinux]# cd pano12
[root@localhost pano12]# gzip -d panosrc.tar.gz
[root@localhost pano12]# tar xf panosrc.tar
[root@localhost
Computers are funny things with the billions or more of circuits I can't
Help but wonder if that is where the inconsistency comes from 90 some %
of
The time and not so much the software.
Dwaine
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January
If the mail option is activated, nabou will send the
report to the corresponding email, if this is not
activated it will send it to STDOUT, which is the
default of the linuxrc configuration file. In this
case, how do I read the STDOUT report?
Roberto...
Charlie Bebber wrote:
Mike Leone said:
Meanwhile, that IP belongs to www.picantecorp.com. A Leader in Email
Enhancement Products and Services.
Why would they want to SSH scan you? You work for them? Are a customer?
Collect the same baseball cards as the webmaster? What?
Yeah, I looked
Howdy everyone,
First issue:
All of my win2k clients are generating the following
error:
smbd/nttrans.c:call_nt_transact_ioctl(1762)
call_nt_transact_ioctl. Currently not implemented.
I initially thought that it was a guest user account
issue ( I saw something similar to that in the samba
Ric Tibbetts wrote:
Oscar wrote:
El jue, 17-01-2002 a las 06:51, Ric Tibbetts escribió:
Salvatore Enrico Indiogine wrote:
Greetings!
Each time I try to print an email from Evolution 1.0.1 the mail
component crashes.
Anyone else ran into this problem?
Bigger question:
How did you get it
It's not in the default install. the call is updaterobot. I'm not using it on this
box currently so I can't give you the path ... [just cause I haven't installed it].
Web page is at
http://www.cyest.org/drakupdatetxt/
James
On Thu, 17 Jan 2002 10:37:47 +0200 (IST)
Tal Amir [EMAIL
On Thu, 17 Jan 2002 17:08:57 +1100 (EST)
Steve Kieu [EMAIL PROTECTED] wrote:
Hi,
kppp has its known memory leak bug but I am not sure
if there is any update / fix or work around this bug
for Mandrake 8.1
Not that I know of... of course, someone has to believe there's a leak
and if so,
Actually, I don't mean to be arguementative,,, but your wrong :-)
take a look at lines 203 and 205 of /etc/portsentry/portsentry.conf
its a kill route for ipchains or iptables, you just choose the one you want,
(uncomment it) and it will add a rule for each blocked host... I have used
it and
If I understand you correctly the laptop and the server are on the same
LAN? If so, then all you should need to do is list eth0 (or whatever
your LAN interface is) as a trusted interface in the bastille config
file on the server. That works for me anyway.
Brian
On Wed, 2002-01-16 at 10:04,
I knew about the kernel,, I have never ever upgraded one.. its logical to me
not to..
but my problem is this, I only want to update those packages that are
already installed, as I understand it, if you upgrade a package you didn't
have installed in the first place, it will install it.. and I
nds wrote:
Ric Tibbetts wrote:
Oscar wrote:
El jue, 17-01-2002 a las 06:51, Ric Tibbetts escribió:
Salvatore Enrico Indiogine wrote:
Greetings!
Each time I try to print an email from Evolution 1.0.1 the mail
component crashes.
Anyone else ran into this problem?
Bigger
Ric Tibbetts wrote:
And the verdict is:
snip
It worked for a while, and then for some very strange reason, it
imploded.
It now won't open any of the folders, and the tools menu is empty,
except for the pilot selection.
I tried downgrading it back to v 1.0, no help. I have to assume one of
reply to: [EMAIL PROTECTED]
Well, once again, this old newbie needs advise and consult. I need to
know if it is possible/practicable to set up group calendaring with my
Linux server that is accessed by 5 winXX clients. I hate MS Exchange and
MS Access. I don't have an exchange server, I
I took a look on sourceforge.net and there were a few that looked ok.
http://sourceforge.net/projects/moregroupware/
http://sourceforge.net/projects/tutos/
http://sourceforge.net/projects/courier/
http://sourceforge.net/projects/weborganizer/
Courier is the hybrid email/groupware system..
I'm havin' way too much fun answering my own e-Mail tonight.
I have Evolution 1.0.1 working again. Turned out to be a stuck lock
file in .gconfd/lock
Once I cleared that, it came back to life.
so to put my original statement back in place:
Evolution 1.0.1 is woring on my box.
Ric
On Thu,
85 matches
Mail list logo
