sorry guys, as I have the same email address registered to different mailing list,
just made a mistake by carelessness. Sorry if i have disturbed you guys!
-Original Message-
From: "Mcleod, Ian" <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Date: Fri, 20 Dec 2002 17:2
Tks for reply.
(B
(BI understand the way $test -z "" returns 0 and $test -n "" returns 1.
(B
(BWhat's puzzling me here is this.
(B
(B$test -z (there is no space after -z, no argment) returns 0 which means 'test command
(Bthinks no argment equals to the
(Bempty string'.
(B
(BHowever, $tes
J'ai installe la Mandrake 9.0 sur mon portable medion. Celui-ci ne supporte que
l'ACPI. J'ai donc installe le nouveau noyau 2.4.20.
Tout semble bien fonctionner sauf la batterie.
En effet, lorsque j'essaie de lire les informations de la batterie (cat
/proc/acpi/battery/...), dans la plupart des
James T. Nelson III wrote:
A quick google search for 'circuit board cleaner' turned up some results
that might help you.
I hope all of the googlers here are well aware of the new google viewer
(could replace bugzilla!) and the new google image search (try a search
on your surname!). Just w
On Fri, 20 Dec 2002 18:18:10 +0900
"ath1410" <[EMAIL PROTECTED]> wrote:
> Tks for reply.
>
> I understand the way $test -z "" returns 0 and $test -n "" returns 1.
>
> What's puzzling me here is this.
>
> $test -z (there is no space after -z, no argment) returns 0 which means 'test
>command thi
A 80Gb WD is runing fine for me.
Francisco Alcaraz
Murcia (Spain)
- Mensaje Original -
Remitente: Lorne <[EMAIL PROTECTED]>
Fecha: Miércoles, Diciembre 18, 2002 2:50 am
Asunto: Re: [expert] Western digital drives don't work?/maximum capacity
> On Tuesday 17 December 2002 12:07 pm, Todd
All;
I need to set up a small (private) IRC Chat server. Can anyone recommend
any good software?
Thanks!
Ric
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi,
I am having problems getting perminant sound out of my laptop the spec
is as follows:
Laptop Adagio (38W2) Same as DELL Inspiron 7500 Purchased June 2001
ESS Technology ES1978 Maestro 2E (rev 10)
maestro: Configuring ESS Maestro 2E found at IO 0x1400 IRQ 7
maestro: subvendor id: 0x001114c0
Mark,
This is simplistic, but do other cdroms work in that machine? If so, the first
thing I would check is for finger smudges or scratches on your cdrom disk.
I've had installs stop, and rejection of cd-2 or cd-3 when asked for them. I
couldn't figure it out, until I cleaned off the cdrom of sm
On Fri, 20 Dec 2002, Mark Weaver wrote:
> Hi List,
>
> I've got a good one. The machine is a Dell Optiplex
> GX100/Cel566Mhz/128MB SDRAM - (2) IDE HDD. I've had Mandrake installed
> on this machine before, but due to some mother board troubles I had to
> have the board replaced. Since placing
On Fri, 2002-12-20 at 05:16, Tibbetts, Ric wrote:
> All;
> I need to set up a small (private) IRC Chat server. Can anyone recommend
> any good software?
>
> Thanks!
I've always just used ircd -- easy like pie. The challenge is in
choosing and configuring a bot :-)
--
Jack Coates
Monkeynoodle: A
Hi List,
I've got a good one. The machine is a Dell Optiplex
GX100/Cel566Mhz/128MB SDRAM - (2) IDE HDD. I've had Mandrake installed
on this machine before, but due to some mother board troubles I had to
have the board replaced. Since placing the new mobo into the machine
though I've not been a
Jack Coates wrote:
On Fri, 2002-12-20 at 05:16, Tibbetts, Ric wrote:
All;
I need to set up a small (private) IRC Chat server. Can anyone
recommend
any good software?
Thanks!
I've always just used ircd -- easy like pie. The challenge is in
choosing and configuring a bot :-)
Thanks! I'm
Jack Coates wrote:
On Fri, 2002-12-20 at 05:16, Tibbetts, Ric wrote:
All;
I need to set up a small (private) IRC Chat server. Can anyone
recommend
any good software?
Thanks!
I've always just used ircd -- easy like pie. The challenge is in
choosing and configuring a bot :-)
One more th
Eggdrop is a pretty solid bot. Can authenticate users on multiple
channels, kick and ban unwanted people and keep track of who attempts to
attack the bot. Does not require you to have a workstation running just
to keep bot alive as bot runs from any server.
On Fri, 20 Dec 2002 10:15:45 -0500
"T
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 19 December 2002 06:56 pm, H. Narfi Stefansson wrote:
> Quoting Praedor Atrebates <[EMAIL PROTECTED]>:
[...]
> > I am having a major problem trying to edit a postscript image. I have a
> > journal article, pdf format, that I've converted t
Hmm.. Since it happened with 8.2 also, here's another thing I thought of.
Since you changed boards, have you checked the new bios, and made sure the
"PNP" OS is not selected. That's the usual default setting, and that will
hang a Mandrake install.
On Friday 20 December 2002 09:29 am, Mark Weave
Greetings all,
I have a home brew DVD-R (general) that I have burned with a
pile-o-files, but my Linux machine is having trouble reading the files
from the disc.
Drive info:
Model=TOSHIBA DVD-ROM SD-R2002, FwRev=1Q35, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic
Hi,
It is working currently, after changing the module to es1968
specifically in mdk control centre (which updated /etc/modules.conf)
David Bowie is playing a reasonable speed again :)
JG
J. Grant wrote:
Hi,
I am having problems getting perminant sound out of my laptop the spec
is as follows:
Hi,
It is working currently, after changing the module to es1968
specifically in mdk control centre (which updated /etc/modules.conf)
David Bowie is playing a reasonable speed again :)
JG
J. Grant wrote:
Hi,
I am having problems getting perminant sound out of my laptop the spec
is as follows:
On Friday 20 December 2002 01:01 am, Emily Chan wrote:
> sorry guys, as I have the same email address registered to different
> mailing list, just made a mistake by carelessness. Sorry if i have
> disturbed you guys!
>
Well since you are here booting to DOS chances are you will NOT see those
p
flacycads wrote:
> Mark, This is simplistic, but do other cdroms work in that machine?
> If so, the first thing I would check is for finger smudges or
> scratches on your cdrom disk. I've had installs stop, and rejection
> of cd-2 or cd-3 when asked for them. I couldn't figure it out, until
> I cle
The HW list in the Control Centre DOES NOT display my Card. Nothing !
Actually, when I add the cs4232 module to modules.conf (as I was doing
with MDK 8.2...), it does not make any difference too. My card, a
Crystal Sound 4232 is not recognized.
When I use sndconfig (outside of the X Windows envi
On Friday, December 20, 2002, at 06:16 AM, Tibbetts, Ric wrote:
All;
I need to set up a small (private) IRC Chat server. Can anyone
recommend any good software?
I used the package just called irc, version 2.10.3p1. Might also be
called ircd; not sure where I grabbed it, and a certain patch f
I'd be really interested in that also..
I would like to create a company IRC server for the IT team...
encrypted would be great too..
Also, being able to access from remote locations on a secure encrypted
channel would be necessary..
Anyone that could help with this would be fantastic..
If you
[EMAIL PROTECTED] wrote:
> On Fri, 20 Dec 2002, Mark Weaver wrote:
>
>
>> Hi List,
>>
>> I've got a good one. The machine is a Dell Optiplex
>> GX100/Cel566Mhz/128MB SDRAM - (2) IDE HDD. I've had Mandrake
>> installed on this machine before, but due to some mother board
>> troubles I had to have th
On Fri, Dec 20, 2002 at 12:48:01PM +0100, jipe wrote:
> On Fri, 20 Dec 2002 18:18:10 +0900
> "ath1410" <[EMAIL PROTECTED]> wrote:
> >
> > $test -z (there is no space after -z, no argment) returns 0 which means 'test
>command thinks no argment equals to the
> > empty string'.
> >
> > However, $te
What it has to do with Linux is that it is a side effect of Linux
installation and should be dealt with accordingly for newbie-help /
ease-of-use reasons. C'mon guys. Don't be so territorial. ;-)
We don't need to bristle up every time the M-word is mentioned. I mean
surely we open source folk
Hi guys, well i was reading the answer that jim wrote and noted that you say
that a laptop don't connect with sftp??? i don't have a laptop but will need
one, because i'm going to do a Ph. D. outside and i'm going to buy a laptop
because i cannot take mi box with me.
So i need to know if there
:: Tks for reply.
::
:: I understand the way $test -z "" returns 0 and $test -n "" returns 1.
::
:: What's puzzling me here is this.
::
:: $test -z (there is no space after -z, no argment) returns 0 which means
:: 'test command thinks no argment equals to the
:: empty string'.
::
::
Now it is working, and the solution doesn't make complete sense:
I checked around on the web to see if there awas a Firmware upgrade for
my DVD/CD-RW drive, I didn't find one, but I did find a firmware "hack"
that disabled the region locking on my drive. After applying this, it
can now read
I once burned a Mandrake distro at 14X and later discovered that the
media was only rated for 8X. Pushy bastard that I am, I reburned it at
10X and it came out fine. ;-)
Anyway the install problems with the improperly burned CDs were similar
to those described. So, ya, could be bad CDs.
Mar
Mcleod, Ian ([EMAIL PROTECTED]) wrote:
> Running Mandrake 9.0
>
> any pointers on getting a Dlink MA311 Prism 2.5 PCI based card working under
> Mandrake?
>
> No luck yet - hardware list displays the card - but nothing beyond that..
>
> Want to buy your Pack or Services from MandrakeSoft?
> Go
I resolved this by moving the service partition to /sdb1 and reinstall LM
9.0 to /sda1. LILO then boots fine.
Norman
- Original Message -
From: "Norman Zhang" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, December 16, 2002 4:26 PM
Subject: [expert] boot partition
> I have an
Hi,
LM 9.0 can setup to authenticate using winbind. When I do wbinfo -u, only
users of my NT domain is listed,
e.g.,
user_a
user_b
...
Now I upgrade to 2.2.7 using Mandrake update, and wbinfo -u, I see
e.g.,
DOMAIN\user_a
DOMAIN\user_b
...
How do I make DOMAIN go away?
Regards,
Norman
Want
I've just added a DVD(ro)/CDR combo drive in to my system, and I thought I had
configured correctly:
/dev/cdrom is linked to cdroms/cdrom0, which is linked to
../scsi/host0/bus0/target2/lun0/cd
the scsi modules are loaded, but ...
1. cdrecord -scanbus errors
2. no dvd
any ideas or url? The dv
Tks Mr.miLosh & Mr.Dean,
(B
(BThis problem is getting clear now. However, let me please
(Bask one more question that still remains in me.
(B
(BMr.miLosh advised;
(B
(B>first of all, in the '-z' example u r giving a string,
(B>whic
> > Yes. I have tried other mail clients and have always gone back to Kmail.
> > It has never ever crashed on me or given me any problems. I have also
> > used pine, evolution (yuck...and no way to order mail by date?),
>
> don't know what beta you were on, but 1.0.2 orders by date by default.
>
On Fri, 2002-12-20 at 18:36, Toshiro wrote:
> > > Yes. I have tried other mail clients and have always gone back to Kmail.
> > > It has never ever crashed on me or given me any problems. I have also
> > > used pine, evolution (yuck...and no way to order mail by date?),
> >
> > don't know what be
On Sex 20 Dez 2002 07:15, [EMAIL PROTECTED] wrote:
Pena que eu não fale (escreva em) Francês!
Serve Português?
Ricardo
> J'ai installe la Mandrake 9.0 sur mon portable medion. Celui-ci ne supporte
> que l'ACPI. J'ai donc installe le nouveau noyau 2.4.20. Tout semble bien
> fonctionner sauf la ba
40 matches
Mail list logo