Hi Brian, Eric and All,
It seems like the below set up should work but read to the end to see
what happens. It seems like it would be easier to use Kenwoods KY/KS
commands but that takes motion on N1MM's side. Since Error 53 seems to
come from PowerSDR, perhaps you guys can light a candle for m
e to help so far. None of the AMP RLY outputs seem to
>> activate (pull down) when a transverter is selected. I can receive OK
>> through the XVRX port, though.
>>
>> Thanks and 73,
>>
>> Ken
>> N0GZ
>>
o.com/Downloads.aspx?id=183
-Tim
FRS KB Administrator
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071107/8af84979/attachment.html
___
FlexRadio ma
scrubbed...
> URL:
> http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071107/b131a618/attachment.html
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo
All,
I have posted FlexProfiler Ver. 1.0 [beta]to
svn://206.216.146.154/svn/repos_sdr_windows/FlexProfiler/trunk. The setup
file is in /bin/Release/FlexProfiler Setup and the documentation is in
/Documentation.
FlexProfiler is a stand-alone configuration management program that lets you
store th
one from scratch, same symptoms
>> ?
>>
>>
>> Any clue, it's really painfull to have to switch to 1548 in order to
>> have Powersdr run with HRD, which makes a rather good 'on the edge'
>> setup for Dxing.
>>
>> Best regards
>>
M
>>
>>working fine ! S meter is updated on HRD, quick update of soft pots and
>>ADCl/r values
>>
>>
>>Just to be sure I cleaned the database (both PWRSDR releases) and
>>rebuilt one from scratch, same symptoms
>>?
>>
>>
>>Any clue,
f manually asserting ptt or having the DVK
>
>
>___
>FlexRadio mailing list
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.b
e to switch to 1548 in order to
>have Powersdr run with HRD, which makes a rather good 'on the edge'
>setup for Dxing.
>
>Best regards
>Jean-marc F1HDI
>
>-- next part --
>An HTML attachment was scrubbed...
>URL:
>http://mail.flex-radio.biz/pipermail/f
activate (pull down) when a transverter is selected. I can receive OK
through the XVRX port, though.
Thanks and 73,
Ken
N0GZ
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071107/b131a618
--
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071107/f2d48639/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/fl
art --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071107/f2d48639/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/li
Per Tim's suggestion, I upgraded the firmware- problem fixed.
Thanks Tim.
Richard, WU5K
-Original Message-
From: FireBrick [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 07, 2007 12:22 PM
To: Richard Stouffer; 'FlexRadio List'
Subject: Re: [Flexradio] Almost have Flex & PWSDR the w
Same here
Heil ProSet, and Heil Pedal into Heil Yaesu style connector via mic
connector on front of Radio.
Also a pushbutton into PTT on rear of radio.
- Original Message -
From: "Richard Stouffer" <[EMAIL PROTECTED]>
To: "'FireBrick'" <[EMAIL PROTECTED]>; "'FlexRadio List'"
Sent: Wed
So Eric:
What you mean is the following set-up in Power SDR then:
In Setup
DSP
Keyer
Set:
Primary SDR
Secondary CAT
PTT Line RTS
Key Line DTR
Brian K7RE
Eric Wachsmann wrote:
>Rob,
>
>I'm thinking that we may very well already have what you are looking for.
>Please check out the Secondary
I am using 0.1.1.1 and have had this problem for a while.
Did try .2 but had the no transmit on 80 problem so reverted to .1
I'm pretty sure it's rfi as it doesn't happen transmitting into a dummy load
or at low power, just high power.
but tu for the suggestion.
On 11/7/2007 9:25:10 AM, Dale B
Rob,
I'm thinking that we may very well already have what you are looking for.
Please check out the Secondary settings on the Setup Form -> DSP Tab ->
Keyer Sub Tab. There is a setting for CAT. This would use the same COM
port as the CAT setup.
I just tested this with MixW and it works great.
Bill,
If you're using Firmware version 0.1.1.2, drop back to version 0.1.1.1
and see if you still have the problem. Eric noted in a post yesterday
that on some systems there are problems with a faster clock speed that
is set in version 0.1.1.2. With my system, I cannot use v0.1.1.2, but
v0.1.1
I have had something similar. I'm using a Heil pedal plugged into the Yeasu
connector assembly for my Heil headset. I'm using the front panel jack. When
pushed, the PTT turns transmit on, but I can't shut the transmit off and
have to shut SDR down to stop transmitting. I have the problem with and
If either of you are using firmware v0.1.1.2 (you can check in the Setup
Form -> General Tab), then you may want to upgrade to 0.1.1.3 to see if that
helps.
Eric Wachsmann
FlexRadio Systems
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of
I have one small problem.
Apparently I'm getting rf into the ptt circuit.
Even though I've torroid the cables properly.
Have a good 'single point ground'
Operating high power, will cause the ptt footswitch, desk button, and ptt
from my MFJ DVK to stop working.
Problem does not happen at normal b
When I did a Search for VAC I missed the fact that there was a second
page to the search. Maybe it is just me, but maybe it needs to be
bolder. Jerry
José Dumoulin wrote:
> Hi Jerry,
>
> The knowledge base has a Howto for VAC 4.0X version :
> http://kb.flex-radio.com/article.aspx?id=10218
>
>
22 matches
Mail list logo