Dave Gomberg wrote:
Got my first new country on the Flex 3k tonight!
Minami-Torishima.Gee, I have only had it for a week, at that rate
I will make number one honor roll in two years! Thank you Gerald and
all!!!
Unfortunately, one point does not make a useful graph. After 20-30
We all owe John our eternal gratitude for finding serious bugs in the
ALC system that I have fixed (ending overshoot and some internal
ghosts/IMD forever).He put some serious test equipment on the job
(that I did not have at my disposal) and within literally a few hours of
studying his
To take full advantage of WBIR, you need a signal source. For those
of you with 8640B's or the Elecraft signal generator, you will get good
performance with the SDR-1000. For those without these signal
generators, you will get BETTER performance on strong signals than you
are getting now
READ EARLIER WARNING ABOUT EEPROM AND CALIBRATION
Eric Wachsmann wrote:
Not in the trunk. Just the test branch.
Eric Wachsmann
FlexRadio Systems
On Sat, May 30, 2009 at 9:21 PM, Tim Ellison telli...@itsco.com wrote:
It is in the latest test branch and the trunk.
-Tim
--
Bernd Schnell wrote:
My SWR-Meter of the F5K (1.18.0) shows always 0,0:1 during transmitting, even
when the swr is bad.
When I switch to RefPwr, it shows the power coming back to the reiceiver
correctly.
I am using the installed ATU and I have also an ATU extern (when the installed
is
Eric,
With a major CW contest this weekend, you picked a good time to test it.
I just finished making 300 contacts in the WPX CW contest with my FLEX-5000A
the latest SVN from the trunk. All contacts were made QRO with my
Ameritron AL-572B amplifier running 1 kW.
My PC is an HP Media Center
Ray used Trunk, I used TEST svn 3120
CQ WPX CW
My setup was PWSDRDDUtWritelog/CWSkimmer combo.
PWSDR was in 96kHz mode.
CWSk packet feeding spots into the BandMap for SP
I did S%P also, looking for friends to give them points.
the filtering was fantastic, 40 was wall2wall last night and I used
I am running v1.19.1 svn 3122. I allowed for a new database, etc. The
warning window titled RX1 Image Calibration Required keeps coming up. I
press Ctrl+Shift+P but nothing happens with the program in stop or start
mode. I went through the setup tabs and cannot find anything identifying an
Image
SO Bob do we need to recalibrate the whole radio or just the tx or what?
When I did the Receiver image (CTRL-Shift-P) got the NaN error when it tried
to write the Eprom and the big red X in the Panadapter display.
In the words of Johnny 5 NEED INPUT
Thanks
Bret
WX7Y
-Original Message-
Do you have the latest SVN version? Some of the early ones a day or so ago
were doing this.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bret Mills
Sent: Sunday, May 31, 2009 11:21 AM
To: 'Bob McGwier';
Before calibrating, please read this KC article.
http://kc.flex-radio.com/KnowledgebaseArticle50140.aspx
Having a clean database is critical for calibration success.
-Tim
-
Integrated Technical Services
Apex, NC USA
___
FlexRadio Systems Mailing
Hello,
I am trying to get an audiosignal from the PC to my laptop yet.
VAC is installed on both systems, skype too.
Is there someone who knows the settings for:
- VAC
- Skype (Audiocable 1 2)
- VNC (if nessesary???)
I am not connecting over the internet, I am using my homenetwork
Downloaded Virgin copy of 3122.
With help from ROBOT (Model B-9, Class M-3)
Did Image tests all OK and in ORBIT!
All the best,
WILL ROBINSON
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
Can you tell me where Penny is? I still have a crush.
Bob
Cal Latham wrote:
Downloaded Virgin copy of 3122.
With help from ROBOT (Model B-9, Class M-3)
Did Image tests all OK and in ORBIT!
All the best,
WILL ROBINSON
___
Iam sitting here playing with my 5000a,what a rig. Anyway here is my question,
I have a sdr-1000 rig with the endril 66 box that I want to give to another ham
who is really interested in sdr radio. Its been in the box,since I got my 5000a
2 years ago. It is a late production 1000. Since I have
There have been no updates to the SDR-1000 since before it went out of
production, so you probably have the latest hardware.
There is NO firmware in the SDR-1000. Only the FLEX family of SDRs have
firmware
Using the latest PowerSDR code is what you need to do.
WBIR will do nothing for DDS
My new Flex-3000 ... getting to know it ... very nice.
I am, however, seeing spurs every 8 KHz coming from an external source, I
believe, since disappears with dummy load. Any thoughts about what might be
candidates for an 8 KHz spacing?
Thanks!
A soundcard? Many digital mode programs run the soundcard at 8kHz.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Sanger, Joseph joseph.san...@nyumc.org
I am, however, seeing spurs every 8 KHz coming from an external
source, I believe, since disappears
Hi,
Other than digging through the PowerSDR source is there a published API for the
FireWire / FlexWire I/O?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Interesting that's a dilemma ... don't know if there is a way to turn off
the internal sound card in the computer hosting the flex ... not sure I really
want to either
Maybe it is coming from one of the other 2 computers I have on in the house ...
although they are about 30-40 feet
Bernd,
Try resetting the database first, but more than likely the output
bridge has failed in the radio, so it should come in for repair..
Fill out the HW Repair Worksheet on this web page and send to the
address further down the page..
I have been a little pistol ever since my first day
operating. Every HF contact I have is on a screwdriver vertical
(all the architecture committee, AKA the XYL, will
allow). Originally I ran barefoot on a IC-718, then added a SB-220,
which helped a lot under the circumstances. But I got
SWR only displays during TUN. It reads 0,0:1 during transmit.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dudley Hurry
Sent: Sunday, May 31, 2009 12:40 PM
To: Bernd Schnell
Cc: flexradio@flex-radio.biz
Subject:
Gary,
The Reflector is not the medium for sales and shipping issues. Those folks do
not monitor the Reflector for this type of correspondence. If you have a
problem, call (not e-mail) FlexRadio Monday AM and speak to Matt. They get
hundreds of e-mails daily and yours could slip though the
The fact that this guy ordered a 3000, got billed for it but not shipped is
important for ALL to know. I thought it was in your business model to not bill
until you shipped. If anyone, other than a Flex employee, disagrees I will
shutup.
Burt
--- On Sun, 5/31/09, Tim Ellison
I think it depends on how you order. If you order via the web, you get
charged immediately. If you phone in your order, you can ask that it
not be charged until it is shipped. They are pretty clear on that when
they announce the new products.
Neal Campbell
Abroham Neal Software
Programming
Bert,
I didn't indicate that it wasn't important for people to know what was going
on. FlexRadio is more transparent in their business dealing that a lot of
companies (just ask the folks who bought WonderRadios that paid their money
over a year ago, have no products and SDRtec just went out of
One of their web pages tells you that if you order it through their
web store, it is charged immediately. It also tells you if you phone
it in, it is not charged until shipped.
Jerry W4UK
At 16:51 5/31/2009, gary.w.str...@comcast.net wrote:
I am concerned about the Flex 3000 I ordered May
Hello all,
I am asking for some guidance from someone who has put their SDR-1000 on 6m.
I would like to know what RX preamp I need and what TX amp you would
recommend and how you hooked them up. Thanks in advance for your help.
Ciao, Dennis, k0eoo
__ Information from ESET NOD32
I ordered a Flex 3000 on the Web a few weeks ago (right after coming
home from Dayton), and so far my card has not been charged although I
have received a confirmation email and a sales order with estimated ship
date.
73,
John
Jerry Flanders wrote:
One of their web pages tells you that if
I know that Flex is better than most, if not all. When I see a deviation from
that, I point it out. New users and buyers come here. You have become a model
for other businesses. When I see you act like others, I think it must be
corrected in whatever forum it appears
Burt
--- On Sun, 5/31/09,
Don't like ANY vendor to charge before the product is shipped,
however, don't mind the typical test to my account, as long
as it disappears in a couple of days. It is MY money until
the exchange for merchandise!
Jim
N7SGS
-Original Message-
From: flexradio-boun...@flex-radio.biz
Joseph,
I have seen Network cards do this, along with wireless routers..Bad
computer powersupplies too and DC supplies. And neighbor's plasma TV.
73,
Dudley
WA5QPZ
Sanger, Joseph wrote:
Interesting that's a dilemma ... don't know if there is a way to turn off the internal
I turned off my lcd tv, wireless router, and both OTHER computers ... no joy.
Next I guess Is the cable modem. Then I am out of culprits ... I can live with
it ... the filters generally let you navigate the 'choppy' water!
From: Dudley Hurry [mailto:jhu...@austin.rr.com]
Sent: Sunday, May 31,
Tim and others:
Actually, I DID apologize for using the reflector for such a purpose. I DO need
to tell all on this reflector more facts relevant to current and future
Flex-ers:
1) (and most important) I was one of the very first Flex-ers with an early
SDR1000. I couldn't be happier with the
Might also want to check into a Power
conditioner or UPS for the computer. I'm not quite sure, but many of
those have a higher degree of power line filtering and could keep conducted
emissions from your computer from getting back into the radio.
You probably don't want the radio PS
At 14:55 5/31/2009, Scott Chrestman wrote:
My Mitsubishi 52 LCD's power supply radiates even when the display is
turned off. Physically unplugging it from the wall is the only way to see
the RFI disappear. Other power supplies, such as for wifi routers and other
wall-warts will also be on and
My neighbor had a bad computer supply that wiped out 40 and 20m Took me
over a year to figure it out. When I got him to shut it off all was better.
He replaced the supply at his own expense and appologized for causing me the
noise problem. It pays to talk to your neighbors.
-
No mention of the Power Supply on the Flex, maybe I missed it. Maybe something
not quite right if you're using a switching power supply, or just about any
power supply from MFJ.
Can you swap to another power supply, or a battery and just not transmit? I
forget the Flex 3000specs, but think
I've had the Flex for almost 30 days now and have really enjoyed it for
the most part. For one thing, as a cw only operator I am not fond of
the loud mechanical T/R relay used in the 5K. After a lot of searching I
was able to find a set of headphones (thanks to John N3WT) that keeps
out 90% of
Thank you Tom Tom for your insights on the Harbach softkey. I
contacted Harbach and was told I could either send in the older softkey
for modification, or order the newer version which should work with my
SDR-1000.
Now all I gotta figure out is how to keep RF out of my computer. 500
watts
I have a portable Sony shortwave radio I use to find my
way to noise/interference sources. Probably an old portable
AM radio would work as well finding those 8 or 15kHz multi-
harmonic signals. Signals are strong broadside to the loop-
stick antenna and will sharply null off the ends. The
Hi all
Would anyone who has HRD working with the F3K mind sharing
their settings please
Les VK2DSG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
44 matches
Mail list logo
