. Maybe as a small
start-up, they didn't have the training in proper marketing limitations
to not promise something they couldn't, or wouldn't delver (or the
lawyers to tell them not to say that).
73,
Ed
WB0VHF
On 1/18/2016 21:38, William Owens wrote:
Hello Richard,
I think Fl
Since this is an SDR list, I trust you are writing all of your own SDR code,
too, instead of buying it off the shelf.
Just remember, we are all unique. That means that what you find interesting or
easy, others might not and vice versa.
73,
Ed
WB0VHF
Original message From
Bill, there are several successor models from Hercules that are supported
and seem to work as well or better than the MP3 LE. Look on Tobias'
website for a list of supported models.
73 Ed, W1PPN
On Fri, Jan 9, 2015 at 6:48 AM, Tom k2bew wrote:
> Yea, It is not cheap. There is also a
Greg,
As a user of VAC for several years, I recently switched to VB Cable because of
excessive latency with VAC when running JT65 and JT9. VB Cable has worked great
for me the past few months and the price is right, although you might wish to
consider a donation to the software author.
Ed
Lightly used rig in perfect condition. Nine months of warranty left. $3,500.
Email off list if interested.
W1PN
haskell...@gmail.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mail
Yes, the last USB to parallel adapter was sold several years ago. The chip
that was use was discontinued.
Ed
On Sat, Jun 28, 2014 at 3:08 PM, Al K0VM via FlexRadio <
flexradio@flex-radio.biz> wrote:
> Paul,
>I think it is bad news... The only one that I know of that worked was
Sorry, I mistyped. The rig for sale is a 6500 not a 6300.
Ed W1PN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Little used like new 6300 for sale, includes two releases of software.
Contact me off list for detail.
Ed W1PN
haskell.ed at gmail.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz
<http://farcircuits.net/>. A description of my
modifications is on http://madisondxclub.org under INTERESTS -> PROJECTS.
I thought those power supplies were far too valuable to junk out.
Ed, N9MW
For guys who live in the Cleveland/Euclid, OH area:
HGR Industrial Surplus, 20001 Euc
Tim,
Does the Flex 6000 series have any built-in over-voltage protection? How about
the 5000 and 3000?
Ed, K0KC
>
> From: "Tim Ellison, W4TME"
>To: flexradio@flex-radio.biz
>Sent: Thursday, June 12, 2014 11:19 AM
>Subject: Re: [Flex
I agree, I have been on this list for several years now and I have seen many
instances of problems being solved by replacing the Firewire cable with a good
one such as the Granite. I own one myself!
Ed, K0KC
>
> From: Rich - W3ZJ
>To: flexr
Patrick,
I believe that Tim answered your last question here:
$$$ for Software/Firmware? | FlexRadio Systems Community
Ed, K0KC
>
> From: Patrick Greenlee
>To: Ed Wilson ; "flexradio@flex-radio.biz"
>
>Sent: Tuesday, May 13, 2
Try this...straight from the horse's mouth :)
https://community.flexradio.com/flexradio/topics/smartsdr_upgrade_fees
Ed, K0KC
>
> From: Patrick Greenlee
>To: flexradio@flex-radio.biz
>Sent: Tuesday, May 13, 2014 9:30 AM
>Subject: Re: [Fl
Bill, what you experienced is not unusual on here. It's just the way
flexers are. Welcome aboard.
73
Ed W1PN
On Wed, Mar 12, 2014 at 1:44 PM, wp4o wrote:
> Yepp, Neil is a gentleman
>
> Sent from my iPhone
>
> > On Mar 12, 2014, at 1:28 PM, "William and Susan&
http://www.hercules.com/us/DJ-Music/bdd/p/214/djcontrol-mp3-le/
here you go
Ed
Wp4o
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
William and Susan
Sent: Sunday, March 02, 2014 10:18 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio
I would recommend using version 4.12 as I experienced issues with 4.13,
although I do not recall what they were since it has been a while. Just change
the version number in the URL you were given.
Ed, K0KC
>
> From: Jay Nation
>To: flexradio@flex-
h VAC, try moving back to v.4.12.
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
to be migrated to the new tool.
Ed, W1PN
Ed Haskell
Sent from Galaxy Note3
On Oct 18, 2013 2:48 PM, "Steven Hess" wrote:
> Flex has set up a community for the 6000 series of radios that
> replaces the mail list and forum.
> I wonder if we 5000, 3000, and 1500 users will ever
Jim,
Give the 5K a try without an external keyer...the internal one works great for
me, although I am now letting the 5K gather dust as I use the internal keyer on
the 6700.
Ed, K0KC
From: Jim Barber
To: flexRadio@flex-radio.biz
Sent: Sunday, October 6
I'm wanting to get an amplifier to boost my 1500's output to 100 watts or so.
I'm looking at the Ten-tec 418 and the newly announced Elecraft KXPA100.
So my questions are:
1) Which should I get? Are there others that I should consider?
2) How do I 'key' the 1500 and the amplifier to tran
http://sofodynamicx.com/loiu/zysgununoos.htm
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Ba
Paul, it is already CE approved.
73
Ed W1PN
On Wed, May 22, 2013 at 2:54 PM, Paul20 wrote:
> It might be worthwhile removing the (order now) section for the 5000 on
> the front page of the website.it is slightly confusing.
> Still no answer from flex or the dealers in the UK as to
&
Geep,
Works fine here!
Ed, K0KC
From: "Gordon P. Howell, Jr."
To: FlexRadio reflector
Sent: Saturday, May 18, 2013 11:10 AM
Subject: [Flexradio] ARRL off line?
I haven't been able to get into the ARRL site for several days, can&#x
That's because there competion out there from INDIA
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TM
Sent: Tuesday, April 16, 2013 5:43 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Re V2.6.4
Tim:
Someone may already have said the sa
this switch to
replace it?
Any advicewould be appreciated.
Thanks,
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
Thanks for the info, Tim...I will check into the RigRunner data sheet to see if
this is specified.
Ed, K0KC
From: Tim McDonough N9PUZ
To: flexradio@flex-radio.biz
Sent: Monday, March 18, 2013 5:06 PM
Subject: Re: [Flexradio] Powerpoles
A Powerpole is not
Thanks for the info, Ray...that is quite a voltage drop!
Ed, K0KC
From: "Ray, K9DUR"
To: 'Ed Wilson' ; flexra...@yahoogroups.com
Cc: flexradio@flex-radio.biz
Sent: Monday, March 18, 2013 4:35 PM
Subject: RE: [Flexradio] [FlexRadio] Po
According to the West Mountain Radio crimp manual, 15, 30, and 45 amp contacts
all have the same contact area and the only difference is the wire sizes that
they will accept.
Ed, K0KC
From: John Molenda
To: flexra...@yahoogroups.com
Cc: Ed Wilson ; Greg
Thanks, Greg!
Ed, K0KC
From: Greg
To: flexra...@yahoogroups.com
Cc: "flexradio@flex-radio.biz"
Sent: Monday, March 18, 2013 2:18 PM
Subject: Re: [Flexradio] [FlexRadio] Powerpoles
I think Gerald recently said it comes with a 10AWG power cable
connections on the RigRunner.
Also, does anyone know if the Flex-6700 is supplied with a single AWG 10 power
line or does it use parallel AWG 12 lines like the Flex-5000 and Flex-3000?
Thanks in advance!
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio
Neal,
I think that you might have intended to provide a link!
Ed, K0KC
From: Neal Campbell
To: "flexradio@flex-radio.biz"
Sent: Thursday, February 21, 2013 1:42 PM
Subject: [Flexradio] Good laptop for 3000/5000
Hi guys
Here is a good price
Ray,
This looks like a great little application, but when I try to install it, I get
the BSOD under Win 7/32...any suggestions?
Ed, K0KC
From: "Ray, K9DUR"
To: k9dur_softw...@yahoogroups.com; flexradio@flex-radio.biz
Sent: Thursday, January 31,
Dale,
80C and above is near the maximum of 90C which should never be reached without
risk to the finals. I have never seen the color-coded temperature indicators
show-up in recent versions of PowerSDR.
Ed, K0KC
From: Dale Hankins
To: percival
with some
fan noise.
Ed, K0KC
From:Ray percival
To: flexradio@flex-radio.biz
Sent: Tuesday, January 15, 2013 2:46 PM
Subject: [Flexradio] Silenx fan Mod on Flex 3000- beware
Folks,
Just a note to anyone thinking of performing the Silenx Mod on their
Is there an equivalent fan for the 5000?
Tnx & 73,
Ed
WB0VHF
Sent from my HTC
- Reply message -
From: "Greg"
Date: Mon, Dec 31, 2012 14:59
Subject: [Flexradio] fan noise on a 3000
To:
The Thermaltake ISGC Fan 8 is even a bit better...
18.2 dba at 24.4 CFM
73
Greg
it in my opinion!
Ed, K0KC
From: "y...@aol.com"
To: FlexRadio@flex-radio.biz
Sent: Sunday, December 30, 2012 3:54 PM
Subject: [Flexradio] fan noise on a 3000
Have a new 3000, also had one when they first came out, this one seems
to hav
OK Michael, mine is $2,600 and has two receivers, is in like new condx, and
has very few operating hours on it.
Ed W1PN
On Mon, Oct 22, 2012 at 1:26 PM, Michael Walker wrote:
> good point...
>
> Mine is in Canada and I want $2850 for the 5000 with the RX2 and the ATU
> installed.
&g
Thanks for the ideas, Steve!
I will play with the buffer sizes, but I cannot imagine a 5 second delay, but
who knows My VAC program is configured identically on both computers, but I
will check that again.
Ed, K0KC
From: Steve Sterling
To: flexradio
Make that PowerSDR 2.4.4...sorry for the typo.
- Forwarded Message -
From: Ed Wilson
To: "flexradio@flex-radio.biz" ;
"flexra...@yahoogroups.com"
Sent: Saturday, October 13, 2012 8:15 AM
Subject: Transmit Delay
Colleagues,
I operate primarily JT65 these days
dead
this morning and somehow missed it with the Flex-5000?
Thanks for any insight.
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
That should have been:
...so a low value would NOT improve CW performance.
- Forwarded Message -
From: Ed Wilson
To: "flexra...@yahoogroups.com"
Sent: Sunday, September 16, 2012 3:52 PM
Subject: Re: [FlexRadio] Re: VAC Buffer Latency
Thanks for your input, G
- Forwarded Message -
From: Ed Wilson
To: "flexra...@yahoogroups.com"
Sent: Sunday, September 16, 2012 3:52 PM
Subject: Re: [FlexRadio] Re: VAC Buffer Latency
Thanks for your input, Gary!
As I understand it, the latency adjustment applies only to VAC and I do not us
(primarily JT65 and PSK31), I was wondering if anyone could shed some light
on the benefits of high or low VAC Latency? Also wondering what the VAC latency
was in previous versions of PowerSDR?
Thanks,
Ed K0KC
___
FlexRadio Systems Mailing List
test with LatencyMon to see if I can identify
exactly what is causing the long DPC. I ran the system all night, but a Windows
restart after an automatic upgrade caused me to have to start over again today.
Ed, K0KC
From: Rich - W3ZJ
To: flexradio@flex
I just had a freeze with the manufacturer's Firewire driver, so I have not yet
found a solution other than to revert back to 2.3.5. Again, the cause was
apparently a long DPC of over 35,000 microseconds after about an hour of
operation.
Ed, K0KC
Fro
Al,
Not yet, I have improved the performance, but I have not eliminated the
problem. I am testing today with the manufacturer's (LSI) Firewire driver.
Ed, K0KC
From: Al Zabarsky
To: Ed Wilson
Cc: "flexra...@yahoogroups.com" ;
"flex
card
(LSI) and will let you know how it goes.
Ed, K0KC
From: Ed Wilson
To: "flexra...@yahoogroups.com"
Cc: "flexradio@flex-radio.biz"
Sent: Tuesday, September 11, 2012 6:11 AM
Subject: Re: [FlexRadio] Re: Flex 3000 Freezes with v2
quot; before I ran the test overnight which should improve
latency performance.
I played a YouTube video while PowerSDR 2.4.4 was running this morning to
replicate your issue and everything ran fine for me.
Best of luck in solving your problem!
Ed, K0KC
From: d
Gents, isn't there an Elecraft list where this would be more appropriate?
Ed W1PN
On Tue, Aug 21, 2012 at 9:11 PM, Tony Estep wrote:
> On Tue, Aug 21, 2012 at 7:14 PM, Burt wrote:
>
> > I have no idea what you are talking about.
> >
> ---
> Ah, okay, no pr
Preamp has been spoken for.
Thanks
Ed, WP4o
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
flexradio-requ...@flex-radio.biz
Sent: Friday, August 03, 2012 1:00 PM
To: flexradio@flex-radio.biz
Subject: FlexRadio Digest, Vol
Selling Down East Microwave Gasfet Preamp for 6 Meters. I used it on my Flex
5000, and no longer have it
Go figure, 6k down the road.
If your interested please e mail me at w...@tampabay.rr.com, its only months
old and it preformed very very well.
73
Ed WP4o, Tampa Florida
For sale: Low utilization Flex 5000A with two receivers. Perfect condition.
Non-smoking environment. $2,999.
Ed W1PN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
I have excess to my needs an HRFIO-34C Board . I will priority mail
this to you in 48 USA states for $110.00 ... Flex Radios sell these
for $169.00 plus shipping .
http://cart.flexradio.com/HRFIO-34C_p_17.html
Please reply off list, Thanks Ed
Hi gang selling a loaded Flex 5k with its second rcvr, VU5K and antenna
tunner. My price 4100, shipped CONUS.
Will include 6 meter preamp. No mike..smokeless shack.
Purchased Feb 2012. Plenty of warranty.. on it..
Ordered a new version
Thanks, Ed
Wp4o, Tampa, Florida
w
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http:
see if it needs to be returned to Austin. Yes, I did
let it rebuilt a new database, but that
did not help.
Thanks,
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Lee,
I haven't found the speech you are looking for yet but I stumbled upon this
and it's wonderful:
http://www.n8xym.com/2012/01/riley-hollingsworth-one-big-knob-video.html
73
Ed W1PN
On Tue, May 29, 2012 at 1:05 PM, Lee Mushel wrote:
> Some time ago a "farewell speech&
Joe,
I have had a 19 inch monitor on my Flex-3000 for over two years now with no ill
effects.
Ed, K0KC
From: "k...@arrl.net"
To: flexradio@flex-radio.biz
Sent: Friday, May 25, 2012 5:22 PM
Subject: [Flexradio] Flex 3000 and Dell Monitor
I just
Morrice,
I suggest that you contact Eugene Muzychenko [eug...@muzychenko.net], the
software author, to discuss a possible license transfer. Did you mean version
4.11?
Ed, K0KC
From: j m swearman
To: FlexRadio@flex-radio.biz
Sent: Thursday, May 24, 2012 9
Sorry if I have missed this if it has been mentioned previously, but what is
the warranty length on the Flex-6000 series in the US?
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
benefit of
FRS and all its users.
Ed Haskell W1PN
On Mon, May 21, 2012 at 10:36 AM, Brian Lloyd wrote:
> On Mon, May 21, 2012 at 7:09 AM, Neal Campbell wrote:
>
> > I understand all that but this is a very very small company (I bet they
> > take turns sweeping the floors) and th
Sorry, my dyslexia got me. I meant to type TCP/IP not the other way around.
Ed W1PN
On Sat, May 19, 2012 at 11:17 PM, Ed Haskell wrote:
> Greg,
>
> It appears that SmartSDR is not a Windows app. It runs in the 6000 not on
> the PC.
>
> There will be a user interface app (
environments will be supported directly by Flex Radio. It is virtually
certain that others will write these user interface apps on nonWindows
environments.
Ed W1PN
On Sat, May 19, 2012 at 11:02 PM, Greg wrote:
> If at some point I change my computers to Mac or Linux will there be a
> vers
longer is comfortable being as open with us. I don't want
to ignite a flame war with those cynical voices but I can't help feeling
that all of us are now going to reap what those few sowed.
Ed W1PN
On Sat, May 19, 2012 at 9:09 PM, Brian Lloyd wrote:
> On Sat, May 19, 2012 at 5
considerable risk in building this
company.
Ed, K0KC
From: Brian Lloyd
To: Samuel Strongin
Cc: "FlexRadio@flex-radio.biz"
Sent: Saturday, May 19, 2012 12:59 PM
Subject: Re: [Flexradio] Will there be a yearly charge for future PSDR releases
fo
Steve,
I agree with all you say, but I want to quibble with your choice of words:
I (and I believe we) do not "*want*" you to charge for updates. However I
(and I believe we after reflection) think it is "in *our* best interests"
for you to charge for updates.
Ed Haskell W1
tware families is a
sensible way to address some of the economic realities of handling the
costs of software development and support.
Ed Haskell W1PN
On Fri, May 18, 2012 at 11:35 AM, Greg wrote:
> I forgotI did not see this mentioned although it does talk about
> SO2R..is this full
Tim,
Are you at liberty to let us know whether SmartSDR will be compatible with the
current line of Flex radios or will they continue to be driven by PowerSDR?
Ed, K0KC
From: Tim Ellison
To: Alan NV8A
Cc: FlexRadio Reflector
Sent: Friday, May 18, 2012
Jon,
I have been using 4.12 for several weeks now with no issues. I too, had to ask
Eugene for the download URL and he kindly sent it to me promptly.
Before you install the new version, be sure to uninstall the old one first!
Ed, K0KC
From: Jon Maguire
To
Tim,
What is the downside of selecting one of the three "Safe Modes" as opposed to
"Normal" (assuming that my DPCs are low enough)?
Ed, K0KC
From: "Tim Ellison, W4TME"
To: flexradio@flex-radio.biz
Sent: Friday, April
ument. But, I suppose that is just
how it is today, albeit often frustrating.
This is not meant to be a gripe. I'm just echoing Russ's feelings and
offering a few suggestions. I love the radio and will continue to
battle with the "learning curve".
Ed
On 3/9/2012 6:
Wow! I see that this has been supported since PowerSDR 2.0.8. I guess that I
was not paying attention, teacher...after-school detention for me.
Thanks, Tim!
Ed, K0KC
From: "Tim Ellison, W4TME"
To: flexradio@flex-radio.biz
Sent: Thursday, March
While exploring my recent update of PowerSDR this morning, I noticed a menu
item called "Heros". I clicked on it and a window titled "Preselector" came up.
Is this functional and where can I find some documentation on it?
Heros...sounds like the name of a sandwich like gyros! :)
Is their any way to run 2 instance of CwSkimmer ? I would like to
keep an eye on the beacons in the lower end of 6m and at the same
time an eye on the Dx window .
Ed
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
alid technical issues why this
was not done.
Anyhow, the new VAC capabilities in PowerSDR 2.3.5 are VERY COOL (thanks guys)!
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio
dent that I am transmitting at the center of the selected channel?
Thanks,
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40
f fact, my computer must have
restarted itself last night (probably due to an update) when I had my Flex
running and I lost the memory file, but easily restored it from a recent backup.
Ed, K0KC
From: Bill D
To: flexradio@flex-radio.biz
Sent: Saturday, Januar
Did I break the reflector with the F5k C question ? Or am I not
getting mail any longer ? this is a test
Ed
At 06:13 PM 1/22/2012, Ed Stallman wrote:
Is their a place to add a second Hard Drive in a Flex 5000C ? or dos
it have 2 already ?
Ed
Is their a place to add a second Hard Drive in a Flex 5000C ? or dos
it have 2 already ?
Ed
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
measurements.
Ed, K0KC
From: Ed Wilson
To: "flexradio@flex-radio.biz"
Sent: Monday, January 9, 2012 10:23 AM
Subject: Flex-5000 Power Output
Colleagues,
I took some measurements on my Flex-5000A this morning using a dummy load. The
measurements are
Good idea, Al...thanks!
Ed, K0KC
From: Al K0VM
To: flexradio@flex-radio.biz; ed.wil...@ymail.com
Sent: Monday, January 9, 2012 2:06 PM
Subject: Re: [Flexradio] Flex-5000 Power Output
I might be interesting to repeat the Tune power test with the Drive set
Yes
From: Ross Stenberg
To: flexradio@flex-radio.biz
Sent: Monday, January 9, 2012 10:45 AM
Subject: Re: [Flexradio] Flex-5000 Power Output
Interesting results Ed. Were the power readings taken with the PowerSDR meter
translate to spaces.
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
much more that 30
minutes to rear its ugly head and I cannot seem to predict when it may occur.
Ed, K0KC
From: TM
To: flexradio@flex-radio.biz
Sent: Monday, January 2, 2012 4:06 PM
Subject: [Flexradio] PSDR and/or Flex 3000 Audio Issues
I am having a problem
I believe if you right-click on the application icon and select "FlexRadio" and
then "Run as Administrator" even if you are logged-in as an administrator, it
will do the trick, at least with Windows 7!
From: John Swink
To: 'Scott Simmons - WA4DOS' ; flexradio@
Steven,
I use the logging program that came with the HRD + DM780 package. It will
upload the contacts to LOTW, but I have to manually enter the contacts into the
logbook first. I do not think that there is a direct means of going from
JT65-HF to LOTW.
Ed, K0KC
I don't even like fish that well, but I agree that JT65A makes competing with
with the "big boys" easy!
From: Jim McLester
To: Ed Wilson ; Steven Hess ;
"FlexRadio@flex-radio.biz"
Sent: Tuesday, October 25, 2011 1:58 PM
Subject
I should have said COM port PAIR below. You would have had to previously set
these up with whatever software you use to create virtual COM ports. I use
pairs 7 and 17 and set PowerSDR to use port 7 and JT65-HF to use port 17.
From: Ed Wilson
To: Steven Hess
Steven,
I use JT65A with my Flex-5000 and Flex-3000 and I do not use any of those
software packages. Under Setup/Cat Control use a COM port that is unused and
just use that same COM port under Rig Control in JT65-HF. Do not check any of
the software package checkboxes. Works great!
Ed, K0KC
Thanks, Dave!
From: Dave Beumer WØDHB
To: 'Ed Wilson' ; 'Tim Ellison'
; flexra...@yahoogroups.com; w6...@w6cqz.org
Cc: Flexradio@flex-radio.biz
Sent: Thursday, October 20, 2011 5:30 PM
Subject: RE: [Flexradio] VAC and JT65-HF
Ed
Usin
Good info, Brian...thanks!
Ed, K0KC
From: Brian Lloyd
To: flexra...@yahoogroups.com
Cc: "Flexradio@flex-radio.biz"
Sent: Thursday, October 20, 2011 5:07 PM
Subject: Re: [Flexradio] VAC and JT65-HF
On Thu, Oct 20, 2011 at 12:27 PM, Ed Wil
y rigs, so apparently it a characteristic of JT65-HF. I have
copied Joe Large, developer of the program, for some input (no pun intended!).
Ed, K0KC
From: Tim Ellison
To: flexra...@yahoogroups.com
Cc: Ed Wilson ; Dave Beumer WØDHB ;
"Flexradio@flex-r
Dave,
I can get 100 watts out in the tune mode (and CW when I use that mode).
Ed, K0KC
From: Dave Beumer WØDHB
To: 'Ed Wilson' ; Flexradio@flex-radio.biz;
flexra...@yahoogroups.com
Sent: Thursday, October 20, 2011 2:48 PM
Subject: RE: [Flexradi
gnals, but it might be easier to move the passband filter, especially if the
offending signals were near the edge of the 2 KHz JT65A slice of spectrum...I
will try that.
Ed, K0KC
From: Ron Kolarik
To: Ed Wilson ; Flexradio@flex-radio.biz;
flexra...@yahoo
Bob,
I do use DIGU for my JT65A work.
Ed, K0KC
From: Bob McGwier
To: Ed Wilson ; flexradio@flex-radio.biz;
"flexra...@yahoogroups.com"
Sent: Thursday, October 20, 2011 1:29 PM
Subject: Re: [Flexradio] VAC and JT65-HF
Put the radio in DIGITAL m
slider up to -3 to obtain
this reading.
My transmit filter is 0 to 3K, so I do not think that should be a problem.
Ed, K0KC
From: Dave Beumer WØDHB
To: 'Ed Wilson' ; Flexradio@flex-radio.biz;
flexra...@yahoogroups.com
Sent: Thursday, October 20, 201
ot;snippy", but I do not think we should
pursue this topic on the Flex lists.
Ed, K0KC
From: Guy Harris
To: "flexradio@flex-radio.biz"
Sent: Thursday, October 20, 2011 11:29 AM
Subject: Re: [Flexradio] VAC and JT65-HF
Ed,
Are you serio
appreciated.
Thanks,
Ed, K0KC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
o go using diversity RX ..
All that is great if only the RX2 Filter would stay where I set it
it use to stay put using PSDR 18.2 and 2.16 .. The way it is now
any change I make , Mode , Band, the filter reverts back to the default 250 Hz
I'm using PSDR 2.2.2 , have not tried
our early gang
came up with a card to put on the Delta 44 to take its place. I need the
documentations for the card anybody have the information.
Ed
WA3BZT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
1 - 100 of 435 matches
Mail list logo
