ssage-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Charles Greene
Sent: Wednesday, March 29, 2006 10:28 PM
To: PAS
Cc: FlexRadio Reflector
Subject: Re: [Flexradio] SDR-1000 and MIXW software TX issues
Pas,
I use MixW several times a day. To set it up, use N4HY's blurb &quo
Pas,
I use MixW several times a day. To set it up, use N4HY's blurb "How
to Setup VAC with PowerSDR" EXACTLY. It works every time. Deviations
usually do not work.
Other tips. I use a macro in MixW to set up CW and PSK31 in both
MixW and Power Console. The Psk31 macro is:
The CW macro
> Hello,
> I am new to SDR-1000 (one day) and trying to get my MixW to work on TX
> in PSK etc.
I have tried various mode settings including DIGU without luck. In DIGU
I get now output just goes into MOX and I can hear the MIXW stream in
the speaker.
Paul
> I am using 2.16 MixW
> PowerSDR 1.
ls cave in" --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Giuseppe Campana
Sent: Wednesday, March 29, 2006 10:34 AM
To: flexRadio@flex-radio.biz
Subject: Re: [Flexradio] SDR-1000 and MIXW software TX issues
Hello
anyone has notice
Beppe:
That is a very good point. I bet when I "fixed" the ring buffer resets
on the main audio channel I did not repair them at all or correctly for
the VAC. Ooops.
Bob
N4HY
Giuseppe Campana wrote:
Hello
anyone has noticed an increasing "silence time" between the first
and second, add
Hello
anyone has noticed an increasing "silence time" between the first
and second, add third, eccstart TX in DIGI mode using VAC ?
This from several PowerSDR beta release and 1.6.0 also.
The "silence time" would be a problem in DIGI DX / CONTEST
SDR1000PA
DELTA 44 2048/1012 DSP and 512 V
> Hello,
> I am new to SDR-1000 (one day) and trying to get my MixW to work on TX
> in PSK etc.
> I am using 2.16 MixW
> PowerSDR 1.6 Delta 44 DMA buffers 2048 and 48khz
> vComm 226
> Using TS480 emulation on both
> In MIXW have it set to PTT via CAT
> The general CAT functions work, Freq, mode, et
Paul:
If you are using an external sound card you will have to do a wiring
hookup to make it work. There are numerous hookup documents, etc. on
the web site.
I suggest that you do not want to do this and we now have a better way
but it involves the purchase of a commercial product
http://
Hello,
I am new to SDR-1000 (one day) and trying to get my MixW to work on TX
in PSK etc.
I am using 2.16 MixW
PowerSDR 1.6 Delta 44 DMA buffers 2048 and 48khz
vComm 226
Using TS480 emulation on both
In MIXW have it set to PTT via CAT
The general CAT functions work, Freq, mode, etc.
Problem:
If
9 matches
Mail list logo
