Dear Andre,
Yes, I can telnet and ssh on loopback. Boy, that debug setting
on the telnetd sure dumps a lot of output on the telnet side (but
is still silent on the screen where I started it).
- Wayne
On Mon, Mar 03, 2003 at 10:48:15AM -0500, Andre Guibert de Bruet wrote:
>
&
etaq3' from etaq
(the 4.7) reports that etaq3 (the new 5.0 system) has open ports 22, 23,
25, and 110. They all result in immediate 'Connection closed by foreign
host.', even while ps reports that 'telnet -debug' is running.
Actually, 'telnet etaq3 110' ha
Dear FreeBSD,
Immediately after rebooting, I get this:
[EMAIL PROTECTED]:/home/wayne>telnetd -debug
telnetd: bind: Address already in use
This doesn't happen on my other (working) system.
Could this be a clue to my problem?
--
-- Wayne M Barnes, [EMAIL PROTEC
Dear Jason,
[Not too many people jumping onto this thread to help me.]
The first two non-bold lines on rebooting, are:
hw.bus.devctl_disable: 0 -> 1
Entropy harvesting: interrupts ethernet point_to_point.
So I try:
[EMAIL PROTECTED]:/home/wayne>sysctl hw.bus.devctl_disable: 1 ->
Dear John,
I am only trying to connect as a normal user.
telnet etaq3
and
telnet etaq3 22
and
telnet etaq3 25
all come right back disconnecting me:
[EMAIL PROTECTED]:/home/wayne>telnet etaq3 25
Trying 192.168.0.12...
Connected to etaq3.etaq.com.
Escape character
fault connecton protection that I must turn off, or
something? [/etc/hosts.allow is the default setting, I see no answer
there.]
- Wayne
- example screen output below. The new box is etaq3 --
[EMAIL PROTECTED]:/home/wayne>ssh etaq3
ssh_exchange_identification: read: Co
maybe you did. I'm not sure what the problem is then.
Ken
On 30 Nov 2001, Seth Kingsley wrote:
> On Fri, Nov 30, 2001 at 09:12:52AM -0500, Kenneth Culver wrote:
> > On Friday 30 November 2001 02:44 am, you wrote:
> > Have you tried different speakers? Also have you tried moving the soundcard
>
> Your problem is probably somewhere other than ioctl 0x7201; try
> trussing/stracing the app and see what it's trying to access.
>
Alright, I'll try that, I think I have another clue though, I got it to
find the file (it was looking in /usr/compat/linux/mnt/cdrom instead of
the regular /mnt/cdro
On Thu, 29 Nov 2001, Dan Nelson wrote:
> In the last episode (Nov 28), Kenneth Culver said:
> > I was just wondering if the following syscalls had any chance of being
> > implemented anytime soon?
> >
> > linux: syscall ftruncate64 is obsoleted or not implemented (pid=5695)
> > linux: syscall m
Well, FreeBSD-CURRENT will have bugs... That's why it's -CURRENT and not
-STABLE
Ken
On Mon, 10 Sep 2001, Liu Siwei wrote:
> Hi,all:
> Do you run freebsd-current? what current? I make a
> clean SNAP of freebsd-current through make release.
> And make a CD. I install freebsd-current from my
Well, I for one can test it on an alpha (I'm borrowing from
[EMAIL PROTECTED]) as soon as my DSL gets installed ;-)
Ken
On Mon, 27 Aug 2001, Garance A Drosihn wrote:
> At 5:09 PM -0700 8/27/01, Darryl Okahata wrote:
> > Is there some reason why KSE couldn't be integrated
> >ASAP *AFTER* 5.
> > > I have one system that I've been maintaining/updating since the
> > > 2.X days and I feel it's time to nuke it and start over. +1 for a
> > > non-smp system and SMP system.
> > >
> > > That said, I think the value of having both KSE and SMPng in 5.0
> > > is HUGE and I think there is p
> > FreeBSD is going to be left in the dust unless both the SMPng *AND*
> > KSE projects are integrated into 5.0.
>
> I care about having a system that works well and does what I ask of
> it. What the Linux horde is doing is of little concern to me, and I
> suspect the same goes for a number of
On Mon, 27 Aug 2001, Garrett Wollman wrote:
> < said:
>
> > Just to get this out in the public: I for one think 5.x has enough changes in
> > it and would like for KSE to be postponed to 6.0-current and
> > 6.0-release.
>
> I agree. I'd like to see this stuff happen, but I think it's too
> dis
You are building from the ports tree right? Did you check to make sure you
have The include path and library path for OpenGL libraries in the QT
Makefile?
On Tue, 21 Aug 2001, Salvo Bartolotta wrote:
> Dear FreeBSD'ers,
>
> I am running -CURRENT as of August 18, 2001 -- yet another entry in the
I havn't checked, but I'll probably do that soon.
Ken
On Wed, 25 Jul 2001 [EMAIL PROTECTED] wrote:
>
>
> On Wed, 25 Jul 2001, Kenneth Wayne Culver wrote:
>
> > Well, I could do that, but I'd rather write a complete driver with all the
> > regular i
Well, I could do that, but I'd rather write a complete driver with all the
regular interfaces... (open, close, ioctl, and a specific major/minor in
the kernel, I'm going to add other chips to this driver eventually) The
way you are suggesting just opens /dev/io and uses inb and outb to do some
hac
On Wed, 25 Jul 2001, Kenneth Wayne Culver wrote:
> Sorry to post to this forum, but I'm not getting any replies from -hackers
> or -questions, and I've looked at the webpages on writing device drivers,
> as well as several other drivers. Here's my problem/question/whate
Sorry to post to this forum, but I'm not getting any replies from -hackers
or -questions, and I've looked at the webpages on writing device drivers,
as well as several other drivers. Here's my problem/question/whatever...
I am writing a driver right now for the Hardware monitoring features of
the
I guess it won't be a waste of money then. :-)
On Thu, 7 Jun 2001, Jordan Hubbard wrote:
> From: Kenneth Wayne Culver <[EMAIL PROTECTED]>
> Subject: dual athlons
> Date: Thu, 7 Jun 2001 16:18:13 -0400 (EDT)
>
> > Just curious, but are there plans to support the EV6
Do they still perform better than the regular apic from INTEL though? I
mean it IS an EV6 bus.
On Thu, 7 Jun 2001, Mike Smith wrote:
> > Just curious, but are there plans to support the EV6 bus that the dual
> > athlon motherboards use? I'm not going to buy that kind of system unless
> > FreeBSD
Just curious, but are there plans to support the EV6 bus that the dual
athlon motherboards use? I'm not going to buy that kind of system unless
FreeBSD 5 will support it.
Ken
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
With the recent commits to -STABLE (I'm assuming these are MFC that's why
I sent to both freebsd-current and freebsd-stable) having to do with the
ipfw code, I have had a problem compiling the kernel. These are the
errors.
cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes
> This is because some sloppy firmware coders hasn't implemented the
> "test unit ready" command proberly, it return ready no matter what
> state the drive is in :( I've gotten ahold of one burner that has this
> problem and I'm trying to come up with a fix for it...
Is this the same problem I wa
500, Kenneth Wayne Culver wrote:
> > Wont this make installing using sysinstall a bit hard? I know the generic
> > kernel includes all the CPU lines, so that all cpu's are recognized... so
> > are you going to just take this line out of the generic kernel, and have a
> &
Wont this make installing using sysinstall a bit hard? I know the generic
kernel includes all the CPU lines, so that all cpu's are recognized... so
are you going to just take this line out of the generic kernel, and have a
special kern.flp disk with a generic kernel that only has the i386 support
Yeah, that's what I thought. A while back someone sent me some patches
that fix the broken statclock and make it work on laptops, I can't
remember his name right now. However those patches are against FreeBSD
4.1-RELEASE, and I'm not sure if they'd work for -CURRENT. I suppose I
could do without t
I'm not sure what pmtimer is supposed to do. Isn't it supposed to give
support for the broken statclock on laptops? I saw my friend running 4.1
with some patches that allowed him to use the statclock (and the rtc
device showed up in systat -vm 2) On my laptop, pmtimer doesn't appear to
do anything
I'm using a 3ccfe575ct-d, it works great, I just installed using it by
making my own GENERIC kernel with the cardbus stuff on it, and putting it
on an install boot floppy instead of the one that normally comes on
it. I'm not sure the pmtimer is working though, and I keep getting
dmesg: malloc fail
This is to let everyone know that right now as I type I am setting up
FreeBSD to start downloading over my cardbus ethernet card. It seems to
work great except it doesn't beep when the card enables, but that's fine
with me. :-)
=
|
<[EMAIL PROTECTED]> Kenneth Wayne
>Culver writes:
> : on another note, did you ever get a chance to look at that code that
> : supposedly fixes a broken statclock? It is a patch against 4.1-RELEASE I
> : believe. I could still find it for you if you want.
>
> I believe that those
/|
=
On Sun, 7 Jan 2001, Warner Losh wrote:
> In message <[EMAIL PROTECTED]> Kenneth Wayne
>Culver writes:
> : Is the cardbus stuff in the GENERIC kernel, or will I have to change it
> : and build my own release or
University of Maryland, | Website: (Under Construction) |
| College Park. | http://www.wam.umd.edu/~culverk/|
=
On Sun, 7 Jan 2001, Warner Losh wrote:
> In message <[EMAIL PROTECTED]> Kenneth Wayne
>Culver writes
> : is installing FreeBSD-CURRENT with sysinstall using a cardbus supported
> : card (such as a 3com cardbus 3cfe575 or something) working yet? Just
> : wondering because I want to get windows off my laptop, and this will bring
> : me one step closer... (with support for my ess maestro3 chip being
is installing FreeBSD-CURRENT with sysinstall using a cardbus supported
card (such as a 3com cardbus 3cfe575 or something) working yet? Just
wondering because I want to get windows off my laptop, and this will bring
me one step closer... (with support for my ess maestro3 chip being the
last step)
I sent this message to -questions earlier, but nobody seems to know about
my problem:
I just recently tried putting an adaptec 2940w SCSI controller into my
FreeBSD machine (running -STABLE cvsupped and recompiled every night at
1:30AM) and since including the driver in my kernel I've noticed som
I have included two very small patches that identify the via kt133 agp
stuff on the athlon motherboards. I think the messages are ok, but if not,
somebody change them. :-)
--- pci/agp_via.c Wed Jul 19 05:48:04 2000
+++ pci/agp_via.c.new Fri Nov 3 14:50:58 2000
@@ -70,6 +70,8 @@
Wierd, I turned the computer off and turned it back on again and the
problem is solved... sorry bout that.
Ken
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
with a -STABLE as of last night at 1:30 AM EST the ata driver refuses to
configure my DVD drive. Here is the output of a dmesg:
ad0: 8063MB [16383/16/63] at ata0-master UDMA33
ad1: 13029MB [26473/16/63] at ata1-master UDMA66
ad2: 14655MB [29777/16/63] at ata1-slave UDMA66
ata0-slave: <\M-vO\M-
of Maryland, | Website: (Under Construction) |
| College Park. | http://www.wam.umd.edu/~culverk/|
=
On Tue, 31 Oct 2000, Soren Schmidt wrote:
> It seems Kenneth Wayne Culver wrote:
> > > I think one of
> I think one of our Japanese friends has been trying to get these docs
> from VIA. With little luck it seems.
Hrmm, well I'll send a messege or something over to VIA... I'm going to
make this driver in such a way that it would be easy to add more drivers
for other hwmon stuff in the future...
Ke
I was wondering if any of the developers here had any docs for the via
kt133 south bridge. I need the docs so that I can write a driver for the
hardware monitoring features of this chip... I looked on via's website,
but the docs there are incomplete...
Ken
To Unsubscribe: send mail to [EMAIL P
I use 0.85, I had some wierd problems with it in -CURRENT. I've moved down
to 4.1.1-STABLE till some of this stuff in -CURRENT cools down.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administra
It doesn't work for cardbus.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr |
| T
-CURRENT as of the smpng commits is really unstable... it's even somewhat
unstable before that (I was having crashes on heavy disk activity even at
the smpng commit, which could've been just my lack of knowledge of cvs and
screwing up my source tree, but that's what was happening.)
=
Fri, Sep 22, 2000 at 03:37:32PM -0400, Kenneth Wayne Culver wrote:
> > I will try to build a debug kernel, and get a backtrace of what's
> > happening to send to the list, but basically what happened is that I was
> > running a cvsup of the cvs source repository and the ports
Soren Schmidt wrote:
> It seems Kenneth Wayne Culver wrote:
> > Alright, I think I may just do that too... I was going to try to tough it
> > out... but it looks like that just won't work I wish there was some
> > way to get the other changes without getting the SMP stu
http://www.wam.umd.edu/~culverk/|
=
On Fri, 22 Sep 2000, Michael Reifenberger wrote:
> On Fri, 22 Sep 2000, Kenneth Wayne Culver wrote:
> ...
> > To: [EMAIL PROTECTED]
> > Subject: -CURRENT crashes under heavy disk activity
>
I will try to build a debug kernel, and get a backtrace of what's
happening to send to the list, but basically what happened is that I was
running a cvsup of the cvs source repository and the ports repository and
it just crashed and rebooted (I'm doing this remotely, so I can't really
catch any me
as of a few days ago, for some reason my floppy drive controller does not
probe right with -CURRENT... I've attached a dmesg, a kernel config, and
my hints file as kernstuff.tar
Please let me know if I've made some dumb mistake or something in my
configs...
Kenneth Culver
kernstuff.tar
My system fans always stay on... but again this is not in a laptop .. it
is on my regular pc...
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
|
I don't have it enabled... I am not even on my laptop with
-CURRENT... this is on my regular PC... and I'm taking my thermal readings
by banging around on some memory addys through /dev/io with a little hack
of a program I wrote as a windowmaker dockapp for this purpose...
=
I can second this... on my PC the cpu used to run around about 84 degrees
F with the case at 80 degrees F, now the cpu runs at about 91-93 degrees F
while the case runs at 80 degrees F.
=
| Kenneth Culver | FreeBSD: The
> OK - its not my random driver, then :-).
>
Well, unless your random driver is not attached to the ums device... It
does something when I use the mouse attached to the psm device... and the
mouse is still jumpy.
Ken
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-cur
e, 19 Sep 2000, Alexander Leidinger wrote:
> On 18 Sep, Kenneth Wayne Culver wrote:
>
> > 1) When I'm playing music (mp3), and I move the mouse or move a window in
> > X, the sound stutters and I get a pcm0: hwptr went backwards x -> y (where
> > x and y are di
IT's new as of last night. There is a random there, but it's not doing
anything when I move the mouse.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726
Alright, I've been using -CURRENT with the SMPng changes for a few days
and wanted to give some feedback.
Overall everything works, although I have been experienceing a few
problems which may or may not be related.
1) When I'm playing music (mp3), and I move the mouse or move a window in
X, th
Alright, I just wanted to let everyone know that I have gotten the SMPng
stuff up and working on my -CURRENT machine, and everything seems to work
fine except the occasional "pcm0: hwptr went backwards x --> y" when I
play sound and then do anything in X that involves moving a window. Oh,
and also
Could all this be in any way related to the statclock not working on
certain systems (like my Dell Inspiron)?? Also, could the "rtc" device as
listed in systat -vm not being there (I'm assuming this is the
statclock) be causing scheduling anomalies? I ask because I am trying to
get gaim (multi-thr
Lehey wrote:
> On Friday, 8 September 2000 at 0:18:07 -0400, Kenneth Wayne Culver wrote:
> > On Fri, 8 Sep 2000, Greg Lehey wrote:
> >
> >> On Thursday, 7 September 2000 at 22:49:30 -0400, Kenneth Wayne Culver wrote:
> >>>> The point I'm making i
erk/|
=
On Fri, 8 Sep 2000, Greg Lehey wrote:
> On Thursday, 7 September 2000 at 22:49:30 -0400, Kenneth Wayne Culver wrote:
> >> The point I'm making is that we've had these problems before SMPng,
> >> and that you can't automatica
> The point I'm making is that we've had these problems before SMPng,
> and that you can't automatically assume that it's SMPng just because
> you get the messages. On the other hand, the 7 digits seem to be a
> pretty reliable signature.
>
I'm getting this error while starting XFree86 4.0.1 on
the same thing is happening to me, only my pci bus is getting probed 3
times.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The
Nope, I'm not using devfs.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr |
| The
Alright, I forgot to mention what soundcard I have before, so here goes:
I have an es1371 card. To repeat the problem, with a day-old -current the
mixer doesn't work. I have the sound drivers loaded as a module.
Ken
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-curr
In -CURRENT cvsupped as of today, the mixer no longer works. anything that
tries to access the mixer just says "Operation not permitted"
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administra
Yeah, it's supposedly fixed now.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr |
I'm in the process of tracing it out (in my small amount of spare time) to
see where the problem is, and seeing if I can fix it, although I think
this is over my head :-) I just wanna see if I can do it.
=
| Kenneth Culver
Just the lock stuff here, nothing else.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr
My problems are with a previous build of late last week. And my problem
isn't with X. My problem only happens when you start "tail" on some file,
then try to exit. It locks the console solid... neither the mouse nor the
keyboard work.
=
Hrmm, that's even worse than my problem.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr
I have, like when I'm running tail on something, and then I try to ctrl-c
out of it, the whole console locks solid, and I have to reboot. (although
if I was connected to an ethernet, I think I could probably ssh in and
reboot.) Also, as an unrelated problem in -CURRENT, I'm experiencing the
lockmg
I found on my computer that a ds1 builtin soundcard of type 10 (found in
the file) will not init correctly unless the same 400ms wait is applied to
it that is applied to type 8 cards. I have included a patch to make this
happen. The patch was created against a -STABLE from today, but should not
be
This is the patch to make my soundcard, a Creative Ensoniq AudioPCI (an
es1371 chip, device id 0x58801274 rev 0x02). Can someone commit it please?
Thanks.
--- es137x.c.oldSun May 28 11:15:14 2000
+++ es137x.cSat Jul 1 23:22:00 2000
@@ -68,6 +68,7 @@
#define ES1370_PCI_ID 0x50001
Here is a patch with the changes I made to get my soundcard to work. It
was pretty simple, it was just a matter of one more id that needed to be
added so that the ac97 stuff could be turned on. It was trying to do a
pre-ac97 2.1 init instead of what I should have been doing. Anyway, it
works now.
I just got the soundcard to work, patches to
/usr/src/sys/dev/sound/pci/ess137x.c are coming in a minute.
Ken
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
I managed to find a little more info on this chip in my new soundcard. It
is slightly different from a regular es1371... and in linux it even get's
some of its own #defines:
CT5880REV_CT5880_C is it's revision. (or 0x02) and the chip says CT5880 on
it. I'm assuming it's not much different, but so
Alright, this just bit me in the ass... I just bought a card today
that says "Creative Ensoniq AudioPCI" on the box. Well, as far as I can
tell this card uses the es1371 chip. Well, I did a little digging because
apparently the card's pci device id wasn't in the es137x.c file. So what I
did was I
Jun 2000 10:25:05 -0400, Kenneth Wayne Culver wrote:
>
> > Hrmm, I think I just read somewhere (/usr/src/UPDATING?) that crypto is
> > required to get a make world to work, and I guess certain other things
> > won't work as well until you rebuild (?) :-) (:-P)
>
&
Hrmm, I think I just read somewhere (/usr/src/UPDATING?) that crypto is
required to get a make world to work, and I guess certain other things
won't work as well until you rebuild (?) :-) (:-P)
> > if you're using -CURRENT, it's because you havn't followed the advice
> > about the new randomdev
28, 2000 at 04:28:24PM -0400, Kenneth Wayne Culver wrote:
> > if you're using -CURRENT, it's because you havn't followed the advice
> > about the new randomdev.
>
> Stumbled over it right after i sent the email sorry
>
> --
> Pascal Hofstee &
if you're using -CURRENT, it's because you havn't followed the advice
about the new randomdev.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| a
duh... that was too simple... :-)
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr
lverk/|
=
On Sun, 25 Jun 2000, Chuck Robey wrote:
> On Sun, 25 Jun 2000, Kenneth Wayne Culver wrote:
>
> > Hey chuck, except for the SMP stuff, your config looks mostly like mine (I
> > only have a cpu line for i686) Let me know if there's anything I can do
Hey chuck, except for the SMP stuff, your config looks mostly like mine (I
only have a cpu line for i686) Let me know if there's anything I can do to
help though.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
|
I had a wierder problem yesterday... I followed the new changes to the
kernel config file, and included everything that belonged there, and yet
for some reason, my kernel paniced while probing vga0 with an error number
6. I had to use a fixit floppy to get back into the system and compile a
generi
eth Wayne Culver wrote:
> >
> > did you follow Peter Wemm's instructions on the new config changes?
>
> Actually, I did. In fact, I built 2 or 3 kernels after the changes
> went into effect with no problems. It's just the sources that I
> cvsup'd as
did you follow Peter Wemm's instructions on the new config changes?
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The
While it's nice to supposedly have narowed this down to the SMP cleanup,
that doesn't make those of us who are running single processor machines
very cofident that the bug's been found. Here's my guess: there may be
something interupt driven related to the SMP stuff, but there's also
something wr
I saw it once or twice in the last couple of weeks, when I'm kicking the
hell out of the CPU (ie compiling something)
=
| Kenneth Culver | FreeBSD: The best OS around.|
| Unix Systems Administrator | ICQ #: 2476772
I stopped using moused sometime during 4.0-current as a result of this.
It ocasionally froze, moved randomly around the screen, clicked without
being touched, and yes, got extreamly jumpy. The hardware's rock solid,
and once I ditched moused and read the device directly, life went back to
normal.
I was just wondering what the status on the static in the pcm driver on
the SoundBlaster ViBRA16X is... Just in case anyone forgot what I'm
talking about, almost half the time when I start playing an mp3 or an mpg
movie I get static out of the soundcard instead of music. If I keep
restarting the s
> No, I'm saying that OpenSource Motif *will* be going through lots of
> gyrations in the future, and these gyrations may cause instabilities in
> the JDK.
>
> But, if the JDK uses the Motif version it was compiled against, it will
> work 'consistently.
>
> Unlike X (which rarely changes), I su
ue, 9 May 2000, Doug Rabson wrote:
> On Mon, 8 May 2000, Mike Pritchard wrote:
>
> > On Mon, May 08, 2000 at 02:10:28AM -0400, Kenneth Wayne Culver wrote:
> > > I have a suggestion for pkg_delete: Very often when I'm deleting a package
> > > (such as kde, after
>
> > Yeah, I was just joking, I kinda like some things about SVR4, but I still
> > think it would be nice to keep the option of using some of the regular rc
> > scripts that we have now. Imagine the confusion of the people that have
> > ONLY used FreeBSD when they go in and see rc.d and all it's
> >
> > Just curious, but wouldn't this be FreeSVR4??? :-)
>
> I'm going to assume that the smiley means you're joking, but I hope
> that we can stick to discussing this plan on its merits, rather than
> rejecting it out of hand because it's like something that someone else
> is doing.
>
Just curious, but wouldn't this be FreeSVR4??? :-)
=
| Kenneth Culver | FreeBSD: The best OS around.|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr
Kenneth Wayne Culver wrote:
>
> > pkg_delete -d package-version (or some other unused switch for dependancy)
>
> This might be a good option, but there should also be an automatic mode,
> whether or not it's the default.
>
> > remove pkg_version_d
te: (Under Construction) |
| College Park. | http://www.wam.umd.edu/~culverk/|
=
On Mon, 8 May 2000, David O'Brien wrote:
> On Mon, May 08, 2000 at 02:26:42PM -0400, Kenneth Wayne Culver wrote:
> > Instead of
Instead of automatically deleteing the dependencies, I think maybe it
would be better to (with the use of a commandline switch) ask the user
deleting the packages if he/she wants to delete a certain dependency,
without letting the user delete the dependency if some other package also
uses it. (Doe
1 - 100 of 218 matches
Mail list logo
