When I plug in some usb drives, I get a message that the da0 device
is available and I can mount the drive, but sometimes I just see this:
Dec 8 12:46:12 tern /kernel: umass0: LEXAR MEDIA JUMPDRIVE ELITE, rev
2.00/20.00, addr 2
There is no umass0 device... so how do I use this?
_
Oh, and the cd drive is not bootable.
So, I want to boot the cd image from the hard drive, and
use the cd drive for the install after it boots.
I dont think you can just copy CD image to slice and make it boot :-(
Hmm... Now that I think about it, maybe what I did
before was to use the "boo
>dd if=iso of=/dev/ad0s1
>dd: /dev/ad0s1: Read-only filesystem
According to http://makeashorterlink.com/?S37C2186B>[1]
a workaround might be using
dd if=/dev/foo of=/dev/ad0 oseek=63
Ah. Ok. That should have been obvious :oP
What about those first few bytes, though? I think I am not
ge
>dd if=iso of=/dev/ad0s1
>dd: /dev/ad0s1: Read-only filesystem
I just tried the same thing from the fixit floppy, and I get
the same message about ad0s1 being a "Read-only
filesystem"
What am I missing here?
Raised securelevel?
Well... I am not sure why the securelevel would be raised by
dd if=iso of=/dev/ad0s1
dd: /dev/ad0s1: Read-only filesystem
I guess I can boot from the install floppies and use the fixit
floppy Ok. I will go that route, but now I am wondering
why has my favorite foot-blaster been taken away? And...
for future reference, how can I get around the bloc
I am sure a used to be able to do this ...
What I want to do is copy an iso image to a disk partition so I can
boot from it and use that to install. Something along the lines of
dd if=iso of=/dev/ad0s1
but what I am getting now is ...
dscheck(#ad/0x22): fixlabel: invalid magic
fixlabel: in
I am trying to install 5.4 on a Compaq LTE 5100 laptop.
Yesterday, I installed 4.11 on this system, and when the
installer came up, there was a dialog that said the
ethernet card was detected. It worked fine for the
install.
5.4 is not detecting the card.
This is an Etherlink III 10Base card wi
What port do I install to setup WebDav?
Any how is webdav useful.
Depends what you want?! A client or a server? Since the server question was
already answered I recommend KDE's Konqueror as a client. I like it. Of
course it's a little overkill to install KDE if you just want to access
webdav
I'm trying to install FreeBSD on my pc, but both 4.10 and 5.3, after
installation , block at first boot.
I know there is a problem whit my motherboard, ASUS A7N8X deluxe that it
is not supported by FreeBSD.
Can you tell me if 5.4 works on my motherboard? Or a site where I can
download 4.9 that may
I'm trying to install FreeBSD on my pc, but both 4.10 and 5.3, after
installation , block at first boot.
I know there is a problem whit my motherboard, ASUS A7N8X deluxe that it
is not supported by FreeBSD.
Can you tell me if 5.4 works on my motherboard? Or a site where I can
download 4.9 that may
I know I saw this on one of the lists a few weeks ago, but google
as I might, I cannot seem to find the answer.
My gdm process is out of control, taking up all of the processor
power. Right now I am using kill -STOP to freeze it and
kill -CONT when someone needs to log in, but that is no
solution.
kaudiocreator is a nice program for extracting audio tracks and
converting them w/ almost any encoder. Only pittfall is hat kde is
needed.
Is there another program that comes close to the abilities and easy of
use of this kaudicreator?
I have actually had some trouble with kaudiocreator lately
(ta
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/multimedia.html
http://www.google.com/search?q=mixer%3A+%2Fdev%2Fmixer%3A+Device+not+configured
_
Express yourself instantly with MSN Messenger! Download today it's FREE!
http:
> I keep hearing great things about portmanager, but I have
> not been able to run it... when I try, I get:
>
>
> # portmanager -s
> -
>--- PMGRrStatus 0.2.9_3 info: Creating inital data bases
>
I think there is no big difference between just running portupgrade vs
portmanager. I would say portmanager is better and faster because you
don't need to baby sit, it is really automagical, and there is no
messing with an index.
I keep hearing great things about portmanager, but I have
not been
I want to install FreeBSD 5.2R within Bochs.
I inserted FreeBSD bootable CD , and created a new 500Mb image file
for virtual HD via bximage.exe tools.
When I dedicated bochs boot from cd-rom , it seems un-bootable.
Alternatively, I copied boot.flp to Bochs folder and booted from
virutal flop
> >i was clearing out some files in /usr and accidentally did something
and
> >now
> >command such as: clear, make, whereis no longer work ... how can i get
> >them
> >back to working ?
>
> You could try doing an upgrade from the CD.
>
> /stand/sysinstall
Will this change any of the all ready in
i was clearing out some files in /usr and accidentally did something and
now
command such as: clear, make, whereis no longer work ... how can i get
them
back to working ?
You could try doing an upgrade from the CD.
/stand/sysinstall
If you have a working system, you could try copying the
files
Who would I need to speak to about making a product that
involves the little devil? It is not a software item, but instead
it is a material object?
http://www.google.com/search?q=bsd+daemon+copyright
http://www.freebsd.org/copyright/daemon.html
Hi;
I am using FreeBSD-5.3 as a terminal server for a few thin client machines.
I have the inside network interface configured so:
ifconfig_xl0="inet 172.16.0.1 netmask 255.255.0.0 media 100baseTX mediaopt
full-duplex"
and the outside interface is from DHCP.
The clients are configured similarly 1
if the clients visit http serve via internet at the first time after a
long time(eg. one day),my box will delays for about serveral minutes,and
then it works very well.
You do not mention much about the server. Is it shared with
other services? Is that the first person to hit the server in a
day, o
FreeBSD is multi-user right? I know this setup but
only when other users are logging in remotely via
another pc. I just want to know if it is possible for
me to just buy 1 more monitor, a mouse and a keyboard
and just dig a hole between my brother's room and mine
and share with him my pc.
This
In fact I have converted my mp3 files to wav following a tutorial I
found on the net -using mplayer too-
I just want to burn them and I thought this was the way (1st create an
ISO, 2nd burn the ISO)
Anyway I have the same problem:
192# burncd -t -f /dev/acd0 audio *.wav fixate
Well... I am going t
I'll need paragraphs, bold, italics,
superscripts for TM, and hyperlinks, but probably not much more.
I think I would use an entity ref for TM. For example in
html it would be ™
_
FREE pop-up blocking with the new MSN Toolbar - get it
I have installed and run zope in the past with no errors. Now, with
2.7 in the ports zope installs fine but there seems to be a number of
shell variables that must be set, and it seems like there is something
missing.
[...]
Yes, it is quite a bit different now... and prepare yourself for
possible i
I downloaded the OOo-1.1.3_nl package yesterday and wanted to
install it like I did the previous version.
I was very surprised to see that it did *not* wanted to install with a
pkg_add onto my freebsd-4.10p3 system. It was made dependend on de X.Org
I did the exact same thing this morning (after f
> >[...] I primarily
> >bought this board because of the AGP slot, Althon support
> and general
> >reviews by overclockers and gamers [...]
>
>
> Do you have drm working? I have never been able to get it to work...
Do you have an ATI card?
No. Matrox G400.
Here is what my dmesg is saying:
drm0: m
Can X / a window manager be run without a user login as an
interactive display or am I barking up the wrong tree?
(ie I dont want to have to add a winblows box just for the graphics.
And I wont be specing any system without serious BSD firewalling etc)
Not really. You can "auto log in" a particul
[...] I primarily
bought this board because of the AGP slot, Althon support and general
reviews by overclockers and gamers [...]
Do you have drm working? I have never been able to get it to work...
_
Protect your PC - get McAfee.com
Recently I found out that I can make the system boot
4.10-stable by disabling firewire in the kernel. Otherwise
it freezes up while booting.
...
Well... my thought was [...]
On 2004-09-12, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
I missed the first part of this thread, but have you tried disabl
I have an A7N8X-E Deluxe, and have used it with 5.2.1-RELEASE-p9 and now
5.3 beta3. The issues I've read about with Asus mobos have been with
the VIA chipset, which isn't on these boards, and also with ACPI - I
have it disabled in BIOS and in the kernel.
Yea, that is the exact same board I have. I
I have one of those goofy asus A7N8X motherboards.
Recently I found out that I can make the system boot
4.10-stable by disabling firewire in the kernel. Otherwise
it freezes up while booting.
Today I burned a 5.3-beta3 cd and tried to boot that.
It looks like it freezes at about the same place that
Does anyone have experience with this motherboard, in particular using
sata drives? Any ideas what's going on, and how to proceed?
I was hoping this was going to be relatively painless :-(
Do I need to bag 4.10 and go with 5.3 to get this to work?
I have an A7N8X-deluxe. And quite a few problems
I just installed mtools today. I'm tracking 4.10 STABLE and my
ports tree was updated yesterday.
I get an error:
[EMAIL PROTECTED](p1)/usr/src 114% mdir a:
Can't open /dev/fd0.720: Device not configured
Cannot initialize 'A:'
Does your dmesg mention fd0 ?
something like ...
fd0: <1440-KB 3.5" dri
I'm working on a project to change the network on my school to open source
software only (FreeBSD/Linux workstations only).
Excellent. Some lucky students there!
I knew about NIS from readings of the handbook years ago, so I revisited
it today, but there' is something that's missing. I understand
I'm using quanta to develop html applications with
embedded .swf in it. What I want to do is to see its
preview in a browser while I'm doing the programming
in quanta. The problem is.. I don't know if there's
any browser that supports it.
Any browser? In freebsd 4.10???
I use the linux netscape
On 2004-08-03, Steve Kargl <[EMAIL PROTECTED]> wrote:
> Anyone have a tip on using rrestore with ssh instead
> of the rexecd and rcmd facility? My attempts at using
> rrestore result in
>
> dhcp-78-74:kargl[207] rrestore -x -b 64 -f troutmask:/dev/nsa0
> Connection to troutmask.apl.washington.edu
On 2004-08-03, Maksym Marchenko <[EMAIL PROTECTED]> wrote:
> And what you can do with "headless" PC? Can you control this PC only in
> command prompt? Or (may be) you can use anything like X - twm?
>
Sure. You would use the headless machine to run X clients.
I have a headless PC that serves X se
I've got a corrupted drive which i am unable now to clear. Whenever i
try to fdisk it then relabel it i get an error that partition c does not
cover the entire disk and that this might interfere with system utilities.
I've tried:
dd if=/dev/zero of=/dev/ad1 bs=512 count=1
and various combinatio
I have set FBSD up on an old pentium II MMX 233 MHZ machine and everything
works fine except for the mouse (serial). When using X the mouse behaves
crazy i cant get it to move in any useful way.
Ive checked and checked and found: edit /etc/XF86Config and
set Protocol to "Sysmouse" and Device to
What I need is the part that comes after "konqueror"... i.e. which file to
open. And that's assuming Konqueror knows to start in "html mode" since the
file it's opening is html. I thought there might even be a way to specify a
"profile file (??)" to set window size & other options.
konqueror --hel
I have recently gotten rid of window and now only run FBSD. I am a
programmer of many kinds. I program in PHP and was wondering what is a
good PHP IDE?
Have you tried Quanta?
/usr/ports/www/quanta
http://quanta.sourceforge.net/
_
Add
#vipw --> as root
#sudo vipw
vipw: pw_edit() No such file or directory
I pasted that error message in to google and found this:
http://lists.freebsd.org/pipermail/freebsd-current/2004-April/025124.html
perhaps it will help...
_
Tired
Hello. Running FreeBSD 4.10. After I reboot with my
new ipfw.rules I can't load any webpages. I didn't try
by IP address cause I can't remember any off top at
the moment.
Is the firewall logging working?
You need lines in your syslog.conf like ...
!ipfw
*.*
This prompted me to read the kdm help and I have read in the kdm help that
when someone logs using kdm, the shell script Xsession is executed.
So I copied the settings about to my .xsession
Try using the "custom" session from the kdm screen.
I am sure that one will use your ~/.xsession but I do
no
Anyone have mtools working on a remote FreeBSD terminal?
I run floppyd on the terminal, but when I try to connect I get
a message ...
No Recv packet
I also tried one of the alternate forms of starting the server
but I get a strange error message ...
#floppyd -d /dev/fd0 gu4:0
Ignoring extra argumen
I'd like to install FreeBSD on a single partition, how can I do that?
The sys/installer complains about a missing swap partition, (I'd rather
use swap files though).
I have never tried this. It is very possible that the installer cannot
work without creating a separate swap partition.
What you mig
How can I use FreeBSD MBR to load other OS? Can't find
needed doc.
man fdisk
man boot0cfg
_
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
__
> >Apr 21 17:27:13 morreion gdmgreeter[541]: greeter_parse_config: No
> >configuration file: /usr/X11R6/etc/gdm/gdm.conf. Using defaults.
> >Apr 21 17:27:51 morreion gdmgreeter[567]: greeter_parse_config: No
> >configuration file: /usr/X11R6/etc/gdm/gdm.conf. Using defaults.
> >
> >These confuse me
recently I installed the Gnome 2.6 port on my machine, and everything
works just fine when I start X via startx. However, when I try to start
gdm (using /usr/X11R6/etc/rc.d/gdm.sh) as display manager i get an error
pop-up with the following text:
"The greeter program appears to be crashing. I will
I have a FreeBSD-stable system (P3, 1GHz, 500M, nVidia with "nv"
driver) which is a terminal server for 8 thin client systems which log in
via XDMCP. This system ran flawlessly for about 2 years.
Recently (near the kde-3.2 upgrade) I started getting a system lockup
when someone would log out of the
I am looking at ways to speed up file reads one a server thats
running
FreeBSD 5.2.1 and was wondering if there is a way to setup some kind of
read only ram disc for a directory and its contents. What i want to do
is the following:
1. Specify a directory (e.g. /usr/local/www/data)
Ok, I can't contribute this to anything I've ever encountered or
something that I'm doing, but it seems that after about 7-10 days KDE
just dies on me. No crash, no errors, no "I'm gonna shut down".
Nothing. I will be working along and then suddenly it's just not there.
Even the logs show nothin
It seems I can't get portupgrade -arR (or -f) to honor
pkgtools.conf. I've run portsdb -Uu,
MAKE_ARGS = {
'graphics/gimp-devel' => [
'WITH_PYTHON=1',
'WITHOUT_PRINT=1',
],
...
'www/mozilla/' => [
'WITHOUT_MAILNEWS=1',
'WITHOUT_LDAP=1',
'WITHOUT_CHATZILLA=1',
'WITHOUT_COMPOSER=1',
I thought kernels are all found in the / directory. If so, what location
is this passage referring to as the "proper kernel location?"
It is a -STABLE v. -CURRENT thing.
in stable, the kernel lives at /kernel
in current it is somewhere in /boot/ (i think...)
_
I love the frozenbubble game but I got problem running the game
with freebsd 5.1 and 5.2.1 , 5-CU
Here the error I got when running the game.
[SDL Init] Not a HASH reference at /usr/local/bin/frozen-bubble.pl line
322.
I think it may be related with p5-SDL...
Could you tell me wich version of
Before I launch into my new DNS server, I thought I'd try
Gnome and KDE. I still do most things in terminals, by
CLI rather than GUI. Here I use ctwm and have my workspaces
configured with many xterms/workspace. I've hand-coded at
least three different sized xterms.
I have an ASUS A7N8X-E, which boasts dual LAN ports. As far as I can
deduce, only one of the ethernet ports has a functioning driver (sk),
while the other does not. Is there some configuration setting in rc.conf
or elsewhere that I've failed to enable, or is this a known issue that
has yet to be re
Reading some forums, I discovered I could use the following options in
my kernel configuration (5.2):
options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
I looked at the GENERIC kernel config but there were no mention of those
2 options. Where can I find an exhaustive list of available
options/devic
Is there a secret to getting kmplayer to play dvds and mpeg files? I have
mplayer, gmplayer, kmplayer all installed. If I enter mplayer
from within KDE, I get an initial image on the screen, but don't know the
keyboard shortcuts to get it to play (but I can pause it!). gmplayer and
kmplayer bot
Looks like my system is running out of free pty's. There are a bunch of
users on the system running screen, so we are using up a ton of the
ptys.
How do I find out the limit of ptys on my system? (sysctl doesn't
seem to show anything relevant.)
How do I increase that value? The pseudo-pty value in
I've got both 4.9 and 5.1 loaded on my new ASUS A7N8X Deluxe
with two 160Gb disks on the primary ATA controller.
it hangs during kernel boot after the
message:
ad1: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices
Yup. I have the same thing.
What I do is go in to the BIOS a
||
||
||Just checking... do you have
||
||options CPU_ENABLE_SSE
||options CPU_ATHLON_SSE_HACK
||
||in your kernel config?
||
Neither of these are set.
That could be the problem. I have an athlon and could not get mplayer
to do much of anything before I build a kernel wi
MPlayer interrupted by signal 4 in module: decode_audio
- MPlayer crashed by an 'Illegal Instruction'.
It may be a bug in our new runtime CPU-detection code...
Please read DOCS/bugreports.html.
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb'
Hmm... interesting. I've done everything described in man/handbook. The
drives
shows up (correctly) in dmesg and with camcontrol. So *why* will cdbakeoven
not detect the drives?
> > Could anyone point me to some documentation for cdbakeoven, or help
me
> > get started?
I did find *some* document
> Could you anyone send me the output from a normal (ie succesful)
> cvsup-ports session ? I keep getting 'killed' appearing
> Add delta 1.12 2003.08.04.10.54.02 kris
> Add delta 1.13 2003.08.16.01.56.43 kris
> Add delta 1.14 2003.10.19.07.17.46 kris
> Killed
> trinidad#
Having just sent t
I normaly install from ports but wanted to over come this issue anyhow..
I cant install from /sys/standinstall it says that my vertion could not be
found on the ftp server..
?? im looking for the conf file that handles that..
Which version are you using?
In sysinstall, look in the menu ...
Opti
Is docbook-3.0_2 still registered as installed on your system? I think
that
is the one it is looking for. It is possible that when upgrading one
of the
others, that one was removed inadvertently.
No, it is not registered as installed. As a matter of fact, none of the
docbooks mentioned
are install
I am tring to run Enemy Territory using linux emulation, and the program
fails telling my it can't find libGL.so.1. I believe I need the linux
version of this library, but I don't know where to get it. Any help would
be great.
# cat /usr/ports/graphics/linux_mesa3/pkg-plist
usr/X11R6/lib/libGL.so
I think if it were me, I would check to see if the docbook-310 port
were still
installed correctly, and if not, install it and then try pkgdb -F again.
Not sure I understanad the need to examine docbook-310. When I run
pkg_info -ro sgmlformat-1.7_2, I get the following:
Information for sgmlformat-
Just ran my weekly cvsup program followed by portsbd -Uu. Tried running
portsversion -l and received a message indicating that I should run
pkgdb -F to deal with a stale dependency. Note following:
Stale dependency: sgmlformat-1.7_2 -> docbook-3.1_2 (textproc/docbook-310):
docbook-xsl-1.62.3 (sco
I installed XFree86, then i run XFree86 -configure, then i run XFree86
-xf86config XF86Config.new.
Everything is ok. Than i cp XF86Config.new to /etc/X11/XF86Config (i tried
to copy and to
/usr/X11R6/etc/X11/XF86Config but there is no directory X11). then, when i
run startx i get the
next error:
Hi. I'm new to FreeBSD, my previous -nix experience coming from OSX and
Debian/Suse linux. I've been generally very happy with the performance
and relative ease of setup on my 4.8 system.
My biggest problem has been Java. I've done the diablo 1.3 package and
java seemed to work (java -v), but whe
> I am trying to mount a floppy. Don't know what is it that I do wrong,
> cause it doens't work... I have asked for help before, even here, but the
> problem still is not solved :( .
>
Do not mount a DOS floppy. Use mtools instead.
/usr/ports/emulators/mtools
___
While attempting to perform a standard install, when commiting to write to
the Hard drive I get "unable to create swap file-press enter or space to
continue" but of course I tried to continue , completed the install but
initial boot 4.9 halted "with bad super block magic number wrong"
I have
I cvsup'd to RELENG_4 today and rebuilt my system. Now the LANG environment
variable has been set to de_DE.ISO8859-1
I do not remember seeing anything about this while running mergemaster,
and I do not see where it is set in make.conf or anywhere else in /etc
Did I do something wrong?
Where should
Hi;
I cvsup'd to RELENG_4 today and rebuilt my system. Now the LANG environment
variable has been set to de_DE.ISO8859-1
I do not remember seeing anything about this while running mergemaster,
and I do not see where it is set in make.conf or anywhere else in /etc
Did I do something wrong?
Where s
So I gave apsfilter a try, and having problems here too--
I managed to nuke my CUPS setup, and printing a test page
died with "nbp_lookup: Protocol not supported", even though
netatalk is installed on the system.
I think the only thing apsfilter changes is the /etc/printcap and
it saves a copy at /
I just want to be able to send jobs to the printer
and have them come out.
cd /usr/ports/print/apsfilter/
make
make install
cd /usr/local/share/apsfilter/
./SETUP
_
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://jo
Greetings, ^M
Hmm... sounds ok to me. Except for that little hiccup at the end.
Looks more like a windows problem though :o)
_
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
_
I looked at the hand book
played with rc.conf and all the stuff i need in the kerel is there
there is a /dev/ums0 too
dmesg says it found my
micrsoft wirless optical usb mouse
but i can not seem to get it to work
What does the mouse section of /etc/X11/XF86Config look like?
___
I tried configuring the second network card and i
cannot find it using sysinstall.
Try this from the command line:
ifconfig -a
Then take a look in /etc/rc.conf to see how sysinstall set
up the first interface and you may be able to work
out how to configure the other one... It is also
possible t
I just got mplayer working very well yesterday... I am
really impressed with what is working now!
On 4.8-STABLE I had to recompile my kernel with:
options CPU_ENABLE_SSE
options CPU_ATHLON_SSE_HACK
Thanks for this info. When you modified the kernel,
you just used the ports that I'
Hi, sorry for being ignorant, but I don't want to switch
to another OS if freebsd can do the job.
Based on the advices I installed the following
on Freebsd 5.1:
multimedia/openquicktime
multimedia/mplayer
www/mplayer-plugin
www/mozilla (1.4)
www/mplayer-fonts
Still can't get mplayer working. I have
I am having problems getting sound and networking with my A7N8X-Deluxe
motherboard. This seems to be a common problem. I found a few posts which
suggested using 'device xl' (3Com) in the kernel configuration file and
adding snd_ich_load="YES" in /boot/loader.conf to fix these problems. But I
am sti
If I click on alt + ctrl + - or + nothing happens.
Tryed altering the
xf86config file it won't let me.
- in whichever section you choose (16 or 24)
add a line
Modes "1024x768"
With respect to the plus and minus keys; are you using
the ones on the keypad? I believe only the one
I have spent over 2 days trying to install this software but no matter
what I do the desktop size always ends up being too big.
If I click on alt + ctrl + - or + nothing happens. Tryed altering the
xf86config file it won't let me.
Are you editing the file as root?
Why is this so hard seriously its
It seems my nforce2 onboard audio is not detected by freebsd 5.1 plain
works for me in -stable:
pcm0: port 0xd400-0xd47f,0xd000-0xd0ff mem
0xe
d08-0xed080fff irq 5 at device 6.0 on pci0
pcm0:
Maybe try compiling pcm in to the kernel instead of loading the module.
I have had that make a d
I have been reading
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html
and
the info there is easy to understand, but I am confused on how to go about
do a
buildworld and installing it to the path I am going to use for the creating
the
ISO from?
You may also want to look
One of the things I simply haven't been able to figure out yet,
and can't find any documentation for, is how to set up printing
from KDE on FreeBSD. KDE's docs claim that it has an "Add printer"
wizard, but this utility seems to be absent from the FreeBSD port...
as are the drivers for specific pri
This is from my asus A7N8X-deluxe.
One of the onboard nics works for sure. AGP works for regular video,
but I have not got the 3d acceleration (DRI/DRM) working. Not sure if
the sound actually works or not either...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 198
I know this is not the list for that since it is not FreeBSD specific,
but I tried the XFree86 list and did not get any answer... Since I'm
sure some of you must are using TWM, I give it a shot.
How can I make TWM to automatically focus a new window ?
Each time I launch an application, a square (em
cd /var
tar cf - . | (cd /usr/var; tar xf - )
cd /
rm -rf /var
ln -s /usr/var /var
However the 'rm -rf /var' returned
rm: /var: Device busy
After trying all known tricks to me to remove /var, I concluded that
since it was mounted from the /etc/fstab I should dismount it a
May 28 10:20:21 tern /kernel: fd0c: hard error reading fsbn 0 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0 sec 1)
May 28 10:20:24 tern /kernel: fd0c: hard error reading fsbn 0 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0 sec 1)
May 28 10:22:46 tern /kernel: fd0c: hard error writing fsbn 0 of 0-1 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0
Hi;
Recently, trying to use my floppy disk drive, I started getting messages
like this:
May 28 10:20:21 tern /kernel: fd0c: hard error reading fsbn 0 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0 sec 1)
May 28 10:20:24 tern /kernel: fd0c: hard error reading fsbn 0 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0 sec 1)
May 28
/dev/ad4s1a: CAN'T CHECK FILE SYSTEM.
/dev/ad4s1a: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Automatic file system check failed... help!
I find this tends to happen when the disk is on its way out.
I recommend that you back up any important information on
this disk. You can mount a filesystem r
yo, I downloaded a freebsd .iso img, and put in in my drive,
but when I reseted, it wouldn't install,
Yo.
Don't take this the wrong way, but this is a really really bad
trouble report. You are very unlikely to get any responses.
Did you burn a CD or just download the image?
Did you get any error m
I have problem in configuring XFree86 in FreeBSD 4.7
I try to configure it after installation. I used graphical
tool and textmode utility too.
The result is often the same:
"The XFree86 configuration process seems to have failed.
Would you like to try again?"
have you tried this:
http://w
seems this link dosnt work anymore right?
ftp://ftp.freebsd.org/pub/FreeBSD/ports/packages/All/cvsupit-3.1.tgz
at
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html
I do not see that one around either...
but I would just move ahead if I were you.
install the cvsup-wit
Does anyone know if there exists a complete disk copying tool for FreeBSD
akin to the Windown Norton ghost program?
How about g4u ?
http://rfhs8012.fh-regensburg.de/~feyrer/g4u/
_
MSN 8 with e-mail virus protection service: 2 month
1 - 100 of 109 matches
Mail list logo