Hi,
you have defined the usual bits eg
aaa new-model
!
Hello,
I'm setting up freeradius for the first time and I am having an issue with
the radtest testing password localhost 0 testing123 I am getting
radclient: no response from server for ID 2 socket 3 I have ran the
freeradius debugging output and below are the 2 highlighted errors it shows
as
Hi,
I'm setting up freeradius for the first time and I am having an issue with
the radtest testing password localhost 0 testing123 I am getting
radclient: no response from server for ID 2 socket 3 I have ran the
freeradius debugging output and below are the 2 highlighted errors it shows
as
Hi,
I am struggling to configure my FreeRADIUS server for eduroam
(www.eduroam.org), as I understood that some subscribers have done the
configuration successfully, I come here to get help.
I have been running my FreeRADIUS server with out problem for several
years, identifying
On 28 Jun 2012, at 02:54, Olivier Nicole wrote:
Hi,
I am struggling to configure my FreeRADIUS server for eduroam
(www.eduroam.org), as I understood that some subscribers have done the
configuration successfully, I come here to get help.
I have been running my FreeRADIUS server with out
.and for you to add
those remote RADIUS
servers as clients (clients.conf or NAS table in SQL) so that requests for you
can be sent to you.
you might want to also look at the eduroam confluence WIKI for
help/advice/pointers
https://confluence.terena.org/display/H2eduroam/How+to+deploy+eduroam
(www.eduroam.org), as I understood that some subscribers have done the
configuration successfully, I come here to get help.
I have been running my FreeRADIUS server with out problem for several
years, identifying to an openLdap backend.
I managed to configure a test WiFi access point to identify
Hi,
For some reason, it is working now, I did only tiny changes though.
well..you made changes... obviously they were beneficial
- the differences between the WiKi
https://confluence.terena.org/display/H2eduroam/How+to+deploy+eduroam+on-site+or+on+campus
and the cookbook
Hi,
I am struggling to configure my FreeRADIUS server for eduroam
(www.eduroam.org), as I understood that some subscribers have done the
configuration successfully, I come here to get help.
I have been running my FreeRADIUS server with out problem for several
years, identifying to an openLdap
help
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
I created from the opnldap.schema
provided in freeradius, I converted with slaptest. I've deleted the
lines at the end of the file as described in the conversion HOWTO's.
Any help getting a good ldif file to import would be a great help.. I
feel I'm very close!!
here is the ldif file i have
yes, that was the idea. It will be too much of a long story to explain why I
needed it to behave that way :)
Date: Thu, 31 May 2012 19:50:33 +0100
From: a.l.m.bu...@lboro.ac.uk
To: freeradius-users@lists.freeradius.org
Subject: Re: help on proxy
Hi,
1. If the server sends access
Hello...
I am currently using freeRadius to proxy messages between a client and
server as follows:
radius client --freeRadius--radius server
The client normally send access_request messages which are proxyed to the
server. The server can either respond with
Diego Quevedo wrote:
What I need to do now, is the following:
1. If the server sends access-accept, then proxy the message back to the
client (like it is being done at the moment)
2. If the server sends access-reject, then do not proxy, just drop the
packet.
Is that possible?
Yes.
Hi,
1. If the server sends access-accept, then proxy the message back to the
client (like it is being done at the moment)
2. If the server sends access-reject, then do not proxy, just drop the
packet.
eerr, why? that is horribly broken and will cause lots of issues with
clients - making
users mailing list
Subject: Re: Help about debug mode and python
Phil Mayers wrote:
http://bugs.python.org/issue4434
Warning: reading that bug will make you either sad or angry.
Probably both.
Use the static library, closing NOTABUG. Sigh.
I believe it's fixed in Python 2.7.
In my code
Phil Mayers wrote:
http://bugs.python.org/issue4434
Warning: reading that bug will make you either sad or angry.
Probably both.
Use the static library, closing NOTABUG. Sigh.
I believe it's fixed in Python 2.7.
In my code, I worked around it by dlopen()ing libpython, as per the 1st
Hi,
Thank you for your presentation at OSSIR today. As said, I've a technical
question about the debug mode and Python.
We are using python with LD_PRELOAD=/usr/lib/python2.6.so.1 in
/etc/init.d/freeradius file
But when we start FreeRadius in debug mode, it seems that the parameter is
bypassed
Vladimir KOLLA wrote:
Thank you for your presentation at OSSIR today.
You're welcome. It was nice to get to Paris for a while.
As said, I've a technical question about the debug mode and Python.
We are using python with LD_PRELOAD=/usr/lib/python2.6.so.1 in
/etc/init.d/freeradius file
On 05/15/2012 10:12 PM, Alan DeKok wrote:
I'm not sure why you need to preload the python library. It should be
loaded automatically when you load the rlm_python library.
It's more tricky, I'm afraid , due to some python idiocy :o(
Basically, python modules (compiled as a .so) are not
,
jack
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/need-info-on-EAP-SIM-help-tp5653902p5653902.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 20/04/12 11:09, vishal_nitr wrote:
With SHA1 from client:
User-Name = vishal
Calling-Station-Id = 00-23-68-0F-1A-E6
NAS-Port = 0
NAS-Port-Type = Wireless-802.11
Framed-MTU = 1400
Service-Type = Framed-User
NAS-IP-Address = 127.0.0.1
NAS-Identifier = ap7131-0F1AE6
NAS-Port-Id = 0
Hi,
I tried changing few things in lib/radius.c to SHA1 but with no
success.
please post full putput form radiusd -X
regarding using SHA1 - easy, just ensure that your passwords are stored as SHA1
objects - the docs say how to do this
alan
-
List info/subscribe/unsubscribe? See
can't help you change RADIUS. I suggest debugging the program
yourself. Standard C skills will help here.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
alan buxey wrote:
regarding using SHA1 - easy, just ensure that your passwords are stored as
SHA1
objects - the docs say how to do this
No. He's changing the *source code* to encrypt the User-Name password
via SHA1, instead of MD5.
This isn't supported, and will never be supported.
,
nbsp;Bangalore-35.
09900055647.
From: Alan DeKok lt;al...@deployingradius.comgt;
Sent: Fri, 20 Apr 2012 17:07:45
To: vishal_n...@rediffmail.com, FreeRadius users mailing list
lt;freeradius-users@lists.freeradius.orggt;
Subject: Re: Help: PAP with Sha1
vishal_nitr wrote:
gt; nbsp; nbsp; I am
Hi,
Thanks for the mail Alan. I don't agree with your comment that it is *not*
RADIUS if we choose SHA1 over MD5. RADIUS supports SHA1 hashed
user-password attribute. Following link confirms it.
are you talking about changing user passwords (as i first assumed) or are you
talking
,
Bangalore-35.
09900055647.
From: alan buxey lt;a.l.m.bu...@lboro.ac.ukgt;
Sent: Fri, 20 Apr 2012 16:50:14
To: vishal_n...@rediffmail.com lt;vishal_n...@rediffmail.comgt;, FreeRadius
users mailing list lt;freeradius-users@lists.freeradius.orggt;
Subject: Re: Help: PAP with Sha1
Hi,
gt; nbsp
Hi,
Although the AVP User-Password is shown here in clear text, it was not
transmitted to the server in clear text. FreeRADIUS uses the shared secret
to encrypt and decrypt the value of the User-Password AVP.
correct. it was encrypted using the shared-secret , the RFCs give full
vishal_nitr wrote:
This is what I am looking for. What is the place where RADIUS does
decrypt operation.
You were told to NOT ask programming questions on this list.
...
I tried changing few things in lib/radius.c to SHA1 but with no
success.
You clearly want to do
Hi Iliya,
It is working now.
Thanks for your help.
Thanks !
Rathod.
-Original Message-
From: freeradius-users-bounces+rathod=tataelxsi.co...@lists.freeradius.org
[mailto:freeradius-users-bounces+rathod=tataelxsi.co...@lists.freeradius.org
] On Behalf Of Iliya Peregoudov
Sent: Thursday
2012/3/17 ZhenJoey snan4l...@hotmail.com:
Hello every body:
I just set up a freeradius server right now,
Please help me to test it by run
$radtest snan4love 123456 119.127.12.6 1812 12345678
I will be waiting here.
BTW,i do a test my self via a NAS not radtest, it doesnt work.
And what
: Any body here?Please help me to test my server.
From: l...@fajar.net
To: freeradius-users@lists.freeradius.org
2012/3/17 ZhenJoey snan4l...@hotmail.com:
Hello every body:
I just set up a freeradius server right now,
Please help me to test it by run
$radtest snan4love 123456
Hello every body:
I just set up a freeradius server right now,
Please help me to test it by run
$radtest snan4love 123456 119.127.12.6 1812 12345678
I will be waiting here.
BTW,i do a test my self via a NAS not radtest, it doesnt work. is there
something like TimeOut in NAS when it try
There is no WiMAX-MSK attribute in Access-Accept. You need to call
rlm_wimax module from post-auth section of default virtual server:
# raddb/sites-enabled/default
post-auth {
...
wimax
...
}
This module will add WiMAX-MSK and remove MS-MPPE-Send-Key and
MS-MPPE-Recv-Key.
Rathod
...@fajar.net]
Sent: Thursday, March 15, 2012 11:00 AM
To: rat...@tataelxsi.co.in; FreeRadius users mailing list
Subject: Re: Help - ASN-GW throwing error - Validation of attributes failed
On Thu, Mar 15, 2012 at 12:21 PM, Rathod Subhashchandra
rat...@tataelxsi.co.in wrote:
Wireshark logs
Dear Iliya,
Thanks for your valuable suggestion.
Rlm_wimax module was not building. I enabled and now it is building.
As per your suggestion, I have added wimax in file
raddb/sites-enabled/default
Still I am not getting WiMAX-MSK in Access-Accept. Could you please help me
in this?
Thanks
suggestion, I have added wimax in file
raddb/sites-enabled/default
Still I am not getting WiMAX-MSK in Access-Accept. Could you please help me
in this?
Thanks !
Rathod.
-Original Message-
From: Iliya Peregoudov [mailto:iperegu...@cboss.ru]
Sent: Thursday, March 15, 2012 11:41 AM
To: rat
Rathod Subhashchandra wrote:
Rlm_wimax module was not building. I enabled and now it is building.
As per your suggestion, I have added wimax in file
raddb/sites-enabled/default
Still I am not getting WiMAX-MSK in Access-Accept. Could you please help me
in this?
Read the debug output to see
-users-bounces+davidp=wirelessconnections.net@lists.freera
dius.org] On Behalf Of Alan DeKok
Sent: Thursday, March 15, 2012 7:49 AM
To: rat...@tataelxsi.co.in; FreeRadius users mailing list
Subject: Re: Help - ASN-GW throwing error - Validation of attributes failed
Rathod Subhashchandra wrote
To: 'FreeRadius users mailing list'
Subject: Re: Help - ASN-GW throwing error - Validation of attributes failed
Run freeradius in debug mode (-X). Look for eap module debug messages.
Look for wimax module debug messages. Try to understand.
Rathod Subhashchandra wrote:
Dear Iliya,
Thanks for your
On Thu, Mar 15, 2012 at 12:21 PM, Rathod Subhashchandra
rat...@tataelxsi.co.in wrote:
Wireshark logs @ ASN-GW
I could not attach wireshark pcap logs due to size constraint. I have took
print screen of only ACCESS-ACCEPT message copied to MS word.
While that information might be
with timestamp +17
Cleaning up request 7 ID 141 with timestamp +17
Cleaning up request 8 ID 142 with timestamp +17
Waking up in 1.0 seconds.
Cleaning up request 9 ID 143 with timestamp +17
Ready to process requests.
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Help
On 01/12/2012 01:23 PM, lmgo5991 wrote:
Hi,
Could someone please shed some light on the where we are going wrong. We
have followed the documentation provided however it is unclear where to
reference our internal ad servers.
Your subject line is a bit confusing. You say proxy settings but I
. or should ntlm do this automatically...=
..
Ps we are not trying to use ldap sorry for the mis leading test user id :).
Thanks
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Help-with-proxy-settings-please-tp5139910p5140289.html
Sent from the FreeRadius - User mailing list
On 01/12/2012 04:08 PM, lmgo5991 wrote:
Hi Phil,
Thanks for you quick response. Just to clarify what we have succeeded in t=
o date:
1. Install Samba done
2. Join Samba to the domain done
3. Start winbind done
4. Configure FreeRADIUS to use ntlm_auth to check MSCHAP against the
hi,
this wasnt proxying an authentication request - it wasdealing with it direct
(and failing when doing the auth)
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
[suffix] Looking up realm gcu.ac.uk for User-Name =3D radldapu...@gcu.ac=
.uk
[suffix] Found realm GCU.AC.UK
okay, the server has gcu.ac.uk in proxy.conf - so the realm module
knows to deal with it...
[suffix] Preparing to proxy authentication request to realm GCU.AC.UK
okay
Sending
I found how to do what i needed to do
From what i discovered by default it does not do any accounting
regarding user logins.
I have to set in radiusd.conf in log section:
auth = yes
By default was set to no
On 01/03/2012 04:52 PM, Alan DeKok wrote:
Cosmin Neagu wrote:
I already learned how
On Wed, Jan 4, 2012 at 7:52 PM, Cosmin Neagu cosmin.ne...@omnilogic.ro wrote:
I found how to do what i needed to do
From what i discovered by default it does not do any accounting regarding
user logins.
I have to set in radiusd.conf in log section:
auth = yes
By default was set to no
That's
Yes you are right...did some searching on accounting and this is what i
want next. Thanks for clarification.
Cosmin Neagu
On 01/04/2012 03:08 PM, Fajar A. Nugraha wrote:
On Wed, Jan 4, 2012 at 7:52 PM, Cosmin Neagucosmin.ne...@omnilogic.ro wrote:
I found how to do what i needed to do
Hello radius users,
I need some basic info/redirection to start using accounting with
freeradius.
I already learned how to use authentication, but i'm unable to figure
out from details in configurations files how to do some accounting -
basic stuff like when a user logs in or out for start.
Cosmin Neagu wrote:
I already learned how to use authentication, but i'm unable to figure
out from details in configurations files how to do some accounting -
basic stuff like when a user logs in or out for start.
Can anyone point me to some documentation on how to do basic accounting
for
: Viernes, 16 de Diciembre 2011 15:35:33
Asunto: Re: I need your help
2011/12/17 Guillermo William Llanes Suárez gwill...@uci.cu:
Hello Friends:
I am writing to give me ideas on how to apply the following policy in
freeradius:
- I need a user is only registered at the same time just one time, so
8:35:08
Asunto: Re: I need your help
Hola Fajar y amigos.
Lo que necesito es, que una ves que un usuario se encuentre ya autenticado no
pueda otra persona (robo de identidad) usar ese mismo usuario para autenticarse
en otro equipo. Lo que quiero hacer, es, cuando esto suceda, que el intento
Hi,
Hi Fajar and friends.
What I need is that one you see that a user is authenticated and can not be
another person (identity theft) use the same user to authenticate to another
machine. What I do is, when this happens, the authentication attempt is
rejected for second time, or only the
Hello Friends:
I am writing to give me ideas on how to apply the following policy in
freeradius:
- I need a user is only registered at the same time just one time, so when the
user is registered with that other users can not register. I hope I miss
understand.
Thank you very much.
Fin a la
2011/12/17 Guillermo William Llanes Suárez gwill...@uci.cu:
Hello Friends:
I am writing to give me ideas on how to apply the following policy in
freeradius:
- I need a user is only registered at the same time just one time, so when
the user is registered with that other users can not
what's wrong? Help!
Tue Nov 29 17:14:00 2011 : Auth: Login incorrect: [host/dbu14/via
Auth-Type = EAP] (from client private-network port 123 cli
00-0E-A6-B4-43-99)
Tue Nov 29 17:16:02 2011 : Error: -- verify error:num=10:certificate
has expired
Tue Nov 29 17:16:02 2011 : Error: TLS Alert
Victor Guk wrote:
what's wrong? Help!
...
Tue Nov 29 17:16:02 2011 : Error: TLS Alert write:fatal:certificate expired
What does that line say?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
what's wrong? Help!
Tue Nov 29 17:14:00 2011 : Auth: Login incorrect: [host/dbu14/via
Auth-Type = EAP] (from client private-network port 123 cli
00-0E-A6-B4-43-99)
Tue Nov 29 17:16:02 2011 : Error: -- verify error:num=10:certificate
has expired
Tue Nov 29 17:16:02 2011 : Error: TLS
29.11.2011 19:54, freeradius-users-requ...@lists.freeradius.org пишет:
options:
client has wrong certificate
client has wrong date/time set on it
certificate has expired
alan
The time is set correctly.
Certificate has expired. Can I renew it without breaking. Or to create a
new one?
-
List
you can create a new RADIUS cert whenever you want. Just ensure its signed by
same CA and has same details such as CN . If you want to change CA then client
config changes will be needed (likewise for CN changes) ...that assumes the
clients were configured properly/securely. If its just a
Harshavardhan Ch wrote:
Hello sir,
while activating the free radius server with eap
authentication via vmware virtual machine i got error like Failed
binding to authentication address 192.168.1.102 port 1812
and i attched the output file.
Stop posting ODT
Hello sir,
while activating the free radius server with eap
authentication via vmware virtual machine i got error like Failed
binding to authentication address 192.168.1.102 port 1812
and i attched the output file.
output file.odt
Description:
. Running netstat
-anup | grep 181 should help.
--
Fajar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
to
freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
freeradius-users-requ...@lists.freeradius.org
You can
What i did is that: With each user (Uid) , i created multiple userpassword
attribute values,
then, while authenticating, OpenLDAP will compare the input password with
all the created password values --one by one
If the input matched any one of the created pass = Access - Accept
I also know that
On Mon, Nov 21, 2011 at 8:52 AM, Duong Manh Truong
ngoahotanglon...@gmail.com wrote:
What i did is that: With each user (Uid) , i created multiple userpassword
attribute values,
then, while authenticating, OpenLDAP will compare the input password with
all the created password values --one by
!
If anyone have experienced this, please give some advices !
Example: How to do it automatically or
How to create a pool of passwords then use the pool for multiple users :)
Regards!
Message: 3
Date: Tue, 15 Nov 2011 16:09:29 +0700
From: Fajar A. Nugraha l...@fajar.net
Subject: Re: Help: FreeRadius
On Fri, Nov 18, 2011 at 6:20 PM, Duong Manh Truong
ngoahotanglon...@gmail.com wrote:
Hi,
Thanks for your reply :)
I have a better news that: By using OpenLDAP for FR Authen Authorization
= I can configure multiple passwords for each user (Uid)
and use 1 of those passwords for successfully
On 11/18/2011 06:20 AM, Duong Manh Truong wrote:
Hi,
Thanks for your reply :)
I have a better news that: By using OpenLDAP for FR Authen Authorization
= I can configure multiple passwords for each user (Uid)
and use 1 of those passwords for successfully Authentication!
Although it is done
or the password
123abc is both ok
Please help me: How can i set it up?
- I try to insert serveral records with the same username and difference
value - password- in the radcheck table
but at one time, the server accept 1 pair of username/value only :(
- I try to edit the file users manually
On Tue, Nov 15, 2011 at 4:00 PM, Duong Manh Truong
ngoahotanglon...@gmail.com wrote:
Hi all,
I have encounter with an issue and can not find the solution after several
days of thinking :(
I set up FreeRadius Mysql successfully, testing with some account ok,
but my real case: Lot of my users
Ski Mountain wrote:
I am trying to get freeradius working with mysql on a new system. I
even copied the configuration files from a working system, but I am
still having trouble getting the mysql module to load. Yes I have
$INCLUDE sql.conf
uncommitted from radius.conf
Read
freeradius-users@lists.freeradius.org
Sent: Tuesday, November 15, 2011 4:10 AM
Subject: Re: mysql module help
Ski Mountain wrote:
I am trying to get freeradius working with mysql on a new system. I
even copied the configuration files from a working system, but I am
still having trouble getting
On Wed, Nov 16, 2011 at 5:44 AM, Ski Mountain
ski_the_mount...@yahoo.com wrote:
Yes I have already edited the
freeradius/sites-available/default
Did you edit the right file? If you did, sql would show up on the
debug log. The correct file (based on your debug output) should be
list
freeradius-users@lists.freeradius.org
Sent: Tuesday, November 15, 2011 6:57 PM
Subject: Re: mysql module help
On Wed, Nov 16, 2011 at 5:44 AM, Ski Mountain
ski_the_mount...@yahoo.com wrote:
Yes I have already edited the
freeradius/sites-available/default
Did you edit the right file
I am trying to get freeradius working with mysql on a new system. I even
copied the configuration files from a working system, but I am still having
trouble getting the mysql module to load. Yes I have
$INCLUDE sql.conf
uncommitted from radius.conf
Thanks
[root@server ~]#
of information out in a public forum.
Any thoughts?
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Need-help-with-Freeradius-and-802-1X-tp4865617p4958157.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http
Hi,
I have ntlm_auth working. I can auth my AD users with this command:
radtest -t mschap aduser aspassword localhost 0 testing123
And it works.
My problem is when I configure one of my Cisco switches to do 802.1x and
authenticate with Freeradius my Windows (Windows 7 and Vista)
johnboy68 wrote:
I have ntlm_auth working. I can auth my AD users with this command:
radtest -t mschap aduser aspassword localhost 0 testing123
And it works.
Good!
My problem is when I configure one of my Cisco switches to do 802.1x and
authenticate with Freeradius my Windows
Hi,
I am a newbie to FreeRADIUS and I have run into a problem during the setup.
I have spent some time on researching for an answer online, but I got no
luck. I have described the problem as below. Could anyone please let me
know what went wrong? Thank you so much in advance.
Stephen
OS: Mac
Stephen Kwok wrote:
I am a newbie to FreeRADIUS and I have run into a problem during the
setup. I have spent some time on researching for an answer online, but
I got no luck. I have described the problem as below. Could anyone
please let me know what went wrong? Thank you so much in
Hi,
OS: Mac OSX 10.6.8
FreeRADIUS version:�2.1.12
Steps taken:
snip
okay. so you downloaded the software, extracted it, then built it...
great. did you note what happened when you 'make install' ?
Starting�-�reading�configuration�files�...�
but I feel this is something
that would be a normal 802.1X configuration.
Any help on how to configure this environment would be greatly appreciated.
Thanks, John
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Need-help-with-Freeradius-and-802-1X-tp4865617p4865617.html
johnboy68 wrote:
Users with Vista machines and the 802.1X supplicant configured
Windows Server 2008 with Active Directory
Other network connected devices and 'unknown' computers
100% Cisco LAN/WAN
Here is what I want to do:
Dynamic VLAN assignment based on 802.1X with Freeradius able to
We've rolled out FreeRADIUS as the authentication and authorization
server for our University-wide WLAN with 30,000+ users. Our help desk
(general IT, not wireless-specific) support staff is made up of student
workers, with full-time second-level support and us sysadmins/wireless
engineers
hi,
firstly, deployment tool - such as CloudPath xpressconnect or sux1 to ensure
that the user is doing the least amount possible to mess things up (also ensures
that all the right things such as validate server, RADIUS name etc are all
properly
defined).
secondly, capture the output of the
Thanks for the quick reply!
Alan Buxey wrote:
hi,
firstly, deployment tool - such as CloudPath xpressconnect or sux1 to ensure
that the user is doing the least amount possible to mess things up (also
ensures
that all the right things such as validate server, RADIUS name etc are all
1) How do other people - specifically organizations with a help desk
large enough that they're distinctly separate from anyone with enough
privs to tail a log file - handle user support of authentication failures?
In a former life I worked at a largish UK university. Whilst I was there I
if(!control:NT-Password !control:Cleartext-Password){
update control {
Reject-Reason := 'AttributeMissing'
}
}
oops...
-
Arran Cudbard-Bell
a.cudba...@freeradius.org
Betelwiki, Betelwiki, Betelwiki http://wiki.freeradius.org/ !
-
List
.1045715.n5.nabble.com/Need-help-to-store-user-details-tp4821498p4821498.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
On Tue, Sep 20, 2011 at 1:07 PM, Rajkumar balaji
rajkumar.balaj...@gmail.com wrote:
Hi All,
I just want to store user details like, The user name is ABC and the user
belongs to XYZ group and PQR group.
LDAP/files/SQL/whatever? e.g.
to implement this.
Thanks
Regards
Rajkumar Balaji
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Need-help-to-store-user-details-tp4821498p4821565.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http
Hi All,
Thanks for helped me to Authenticate with FreeRADIUS. Now I am able to
authenticate successfully.
Please help me to resole with the following issue,
How to get authorize with FreeRADIUS?
Where to store the user group details and his permissions? (which file i
have to store it)
Thanks
to XYZ group and PQR group.
Thanks
Regards
Rajkumar Balaji
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Need-help-to-store-user-details-tp4821498p4821498.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe
On Tue, Sep 20, 2011 at 1:47 PM, Rajkumar balaji
rajkumar.balaj...@gmail.com wrote:
Purpose is After the authentication i need to retrieve the group details
associated with this user and according to them I need to Authorize the
user.
Store it in FreeRADIUS (text file also fine) ( and I want
-bounces+jake.sallee=umhb@lists.freeradius.org] On
Behalf Of Commonn Systems
Sent: Friday, September 16, 2011 8:51 PM
To: FreeRadius users mailing list
Subject: Re: Need a little regex help
I guess all the regex gurus will laugh at my request I figured it out, for
others, looks like
Commonn Systems ad...@commonn.com wrote:
I guess all the regex gurus will laugh at my request
Only if you had not figured it out ;)
I figured it out, for others, looks like this works: .*:SSID_ABC !
Typically regex is complicated to new comers as there are three
(important) types
201 - 300 of 2430 matches
Mail list logo