I'd also be nice to get a notification if a recording should start while I'm
watching a(nother) channel. Maybe configurable to force/ask/ignore the scheduled
record.
- Richard
Citeren Joe Stump <[EMAIL PROTECTED]>:
| I have a question about the recording deamon (actually two).
|
| 1.) Does it
I'm using the Debian packages and when it boots into Freevo mplayer
doesn't play DVD's or Movies and the log file says that an unknown error
had occurred. Stopping freevo and restarting it fixes the mplayer issue.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are
I have a question about the recording deamon (actually two).
1.) Does it record X minutes/seconds before the actual record time?
2.) If so if I pre-record 3 minutes show A and show B starts right after A
(but 3 minutes before B) does it re-attempt to record if it notices the
/dev/video devices is
Is it possible to easily customize the web interface to show more
information on the Scheduled Recordings page? Mainly I'm looking to see
if I can get the episode title listed there. I have Stargate SG-1 as a
favorite (great show), but I have the DVD sets for seasons 1-4. Not a
whole lot of point r
My freevo box goes to sleep (which I'm hoping to stop). The shitty thing
is that not only does it blank the term, but it totally goes to sleep and
doesn't a.) record and then b.) when it wakes up the clock is set to when
it went to sleep and doesn't update until I do a ntpdate -s.
--Joe
--
Joe S
I attempted to send this message once before, but it never showed up to the
archives. I apologize if people are getting this twice.
My problem is that I can't figure out to get the games menu to show up.
Firstly, where is the games menu supposed to be? Is it shown on the main
menu with Movies
From: Chris Graham <[EMAIL PROTECTED]>
I just did a fresh install of gentoo and there is a couple of problems
with
the rsync-freevo script.
1. xine-lib-1_rc0-r3.ebuild was not unmasked
2. xine-ui00.9.22.ebuild was not unmasked
3. xmltv was not marked as a dependency of freevo so it was not insta
I've had to use ALSA in the past to get my SB Live to record. Is this
well known, is there a way to get the kernel/OSS emu10k driver to
record? I am able to get sound if I turn "igain" above 0, but the
recording sounds over driven and crackly.
ALSA seems (from my memory) to not have these pro
lirc has the ability to output IR commands. a simple modification of the
mencoder script to blast the channel number out is possible.
watch one and record another? same limitation as before, digital
cable/sattelite doesnt give any extra capabilities except that you CANT
watch digital cable while r
http://www.google.com/search?hl=en&ie=UTF-8&oe=UTF-8&q=freevo+cable
On Fri, 21 Nov 2003 14:50:11 -0600, [EMAIL PROTECTED] said:
> Can I control my digital cable or satellite from Freevo? I haven't seen
> any digital receivers in PCI form yet. I suppose you could have Freevo
> control the externa
Can I control my digital cable or satellite from Freevo? I haven't seen any digital
receivers in PCI form yet. I suppose you could have Freevo control the external
receiver via IR. Has anyone done this? I really don't want to go back to analog.
If I do go with analog and plug it directly int
I just did a fresh install of gentoo and there is a couple of problems with
the rsync-freevo script.
1. xine-lib-1_rc0-r3.ebuild was not unmasked
2. xine-ui00.9.22.ebuild was not unmasked
3. xmltv was not marked as a dependency of freevo so it was not installed.
can someone update the rsync-freev
These are my steps
1.) Path (everything returns OK here)
2.) ./setup.sh (select streamzap driver)
3.) Select Exit & Run Configure
4.) make
It failes on make ... doh. I'm at work no - I'll send more detailed error
messages later tonight. Thanks for the help!
--Joe
> You're doing a ./configu
You're doing a ./configure first yeah?
What messages is it giving when it fails?
-Chris
On Fri, 21 Nov 2003 12:48:01 -0500 (EST), "Joe Stump" <[EMAIL PROTECTED]>
said:
> I thought this too which is why I used a snapshot dated August (and one
> dated Oct.) - bot with no success *despite* the patc
First, the simple question are you running on a custom kernel? I believe
you will have to compile your own kernel for lirc to compile, at least I did
on RH9 (I am no linux guru, so this may not apply to all distros).
If you are all set on the kernel side, then you probably need to manually
edi
I thought this too which is why I used a snapshot dated August (and one
dated Oct.) - bot with no success *despite* the patch saying everything
went well. patch -p1 < ../streamzap comes back clear, but when I type make
it errors out.
--Joe
> I am using a Stramzap with great success. I think the t
I had to recompile the SDL with directfb support, move the new lib files
over the existing debian ones, then rebuild directfb - enabling SDL
support.
Looks like its working now - I can see the directfb output when starting
freevo.
I'll need to check the display is ok when I get home.
I'll have to
I am using a Stramzap with great success. I think the trick was to patch
against an older version of lirc, but I don't remember exactly which. I'll
try to go back though what I did this weekend and send what I can to you.
-Davin
- Original Message -
From: "Joe Stump" <[EMAIL PROTECTED]>
T
wierd problem just popped up
whne I schedule a program to record via freevo it will record.
when I start the webserver, and then schedule a recording from there it does
not.
I end up with 2 mencoder instances sitting deadlocked on the machine that I
have to kill.
i have not tried 1.4 yet, as th
I finally just installed the deb package :) (it worked)
--Joe
> "Joe Stump" <[EMAIL PROTECTED]> writes:
>
>> Any ideas?
>
> Try making a commandline for viewing tv with mplayer.
> When that works, try making an mencoder-line.
>
> --
> Eirik Meland
>
> A: Top posters.
> Q: What is the most annoyin
"Joe Stump" <[EMAIL PROTECTED]> writes:
> Any ideas?
Try making a commandline for viewing tv with mplayer.
When that works, try making an mencoder-line.
--
Eirik Meland
A: Top posters.
Q: What is the most annoying thing on Usenet?
---
This
Reading /root/.mplayer/codecs.conf: 61 audio & 157 video codecs
File not found: 'frameno.avi'
Failed to open frameno.avi
Reading config file /root/.mplayer/mencoder
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
success: format: 9
Yes, via debian/rules but I'm not convinced it worked, I'll try again
this weekend.
Thanks
On Fri, 21 Nov 2003 08:35:04 -0400, "James Oakley" <[EMAIL PROTECTED]>
said:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On November 21, 2003 02:27 am, Chris Griffiths wrote:
>
> > I know direct
We don't use eject to control the cdrom anymore, we're using the
ioctl's directly.
On Fri, Nov 21, 2003 at 07:59:08AM -0500, Joe Stump wrote:
> You should add the package "eject" to the list if prereq's. If it's not
> there hitting "." does not eject the cdrom.
>
> --Joe
>
>
>
> --
> Joe Stump
"Joe Stump" <[EMAIL PROTECTED]> writes:
> My record server isn't working at all. When I attempt to run the command
> it logs to on the command line I get this:
>
> MEncoder 1.0pre2-3.3.2 (C) 2000-2003 MPlayer Team
new format in mencoder 1.0preX:
> -tv on is deprecated, use tv:// instead
mencode
"Joe Stump" <[EMAIL PROTECTED]> writes:
> I have a 1.3GHz + 512mb of RAM - what would be enough of a CPU to not have
> to drop frames?
Agree.
Try experimenting with the autosync option.
> Also, does -framedrop degrade the movie experience (I'm
> not a huge a/v'phile, but I don't want my movies
My record server isn't working at all. When I attempt to run the command
it logs to on the command line I get this:
MEncoder 1.0pre2-3.3.2 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Duron MG Morgan 1312 MHz (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags: Type:
You should add the package "eject" to the list if prereq's. If it's not
there hitting "." does not eject the cdrom.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins to be happy."
--
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On November 21, 2003 02:27 am, Chris Griffiths wrote:
> I know directfb is set up correctly as mplayer works, is there an easy
> way to check that it is libsdl that is broken?
> I'm not seeing any output from directfb when I start freevo.
Did you pas
I have a 1.3GHz + 512mb of RAM - what would be enough of a CPU to not have
to drop frames? Also, does -framedrop degrade the movie experience (I'm
not a huge a/v'phile, but I don't want my movies to look crappy).
--Joe
> "Joe Stump" <[EMAIL PROTECTED]> writes:
>
>> 2.) As you play a DVD the a/v g
Peter Svensson wrote:
> Hi. I installed the spanking new 1.4 by way of install script yesterday
> evening.
good
> As it turns out I RTFM'ed only sparingly.
not good.
> I happened to store all my media under /usr/local/freevo.
> Well, as of yesterday evening I don't. 48GB gone on a whoosh.
I'm
Hi. I installed the spanking new 1.4 by way of install script yesterday
evening.
As it turns out I RTFM'ed only sparingly.
I happened to store all my media under /usr/local/freevo.
Well, as of yesterday evening I don't. 48GB gone on a whoosh.
I don't mean to be sniffling and blowing my handkerc
"Joe Stump" <[EMAIL PROTECTED]> writes:
> 2.) As you play a DVD the a/v gets further and further out of sync the
> farther into the DVD you get.
On my box this is caused by too slow cpu.
My solution is to add -framedrop to the mplayer args.
--
Eirik Meland
A: Top posters.
Q: What is the most a
Hi chris,
I'll try to add some features, but i have little spare time on my hands at
the moment ... So just wait a bit, i wrote that everyone should include a
URL to screenshots for their download in the instructions ;)
/jan
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL
34 matches
Mail list logo
