Hi folks, can you help with this one. please.
I installed a clean copy of 10.2 jaguar onto a reformatted hard disc. All
clean.
I had saved my internet preferences, for my client (mulberry)
The server connects whne I press connect. All settings are correct,
including an alternative dial up
does a driver exist for this cardbus card (for my g3 wallstreet)?
i've done a lot of googling around, but haven't found anything. it
doesn't seem to work with the apple firewire drivers by themselves.
thanks!
I used this card on a G3 Powerbook in OS9 without drivers - OK. I
also used it
On Thursday, January 8, 2004, at 06:28 PM, João Loureiro wrote:
Hello,
I have a similiar situation in a Lombard.
Bought a 30GB Hitachi drive to replace the 6GB original IBM.
When I start from 10.2 CD, I run Disk Utility to initialize the drive,
but the program doesn't see the drive.
No sight
At 21:49pm -0800 on 1/8/04, Robin Ashe, contributed:
I'm having troubles getting my Apple Personal LaserWriter LS to work with my
Wallstreet.
I have the 300/LS extension active, the power cord is plugged in, I can turn
it on and get a green light. The toner cartridge is in and I've got
--
From: Clyde Kahrl
Subject: Re: Does D-Link Router support Appletalk?
Anyway, to make sure Xmas went OK I bought an Asante 1004AL wireless
11(b) router. Well, it works great, like everything else I've ever
got from Asante. I have some wire in my old plaster
On 1/9/04 5:06 AM, Paul Stamsen [EMAIL PROTECTED] wrote:
At 21:49pm -0800 on 1/8/04, Robin Ashe, contributed:
I'm having troubles getting my Apple Personal LaserWriter LS to work with my
Wallstreet.
I have the 300/LS extension active, the power cord is plugged in, I can turn
it on and
Yes, most definitely make sure the connections are good. I installed a
40GB Hitachi recently and had to re-format a second time because the
drive connector came loose and would not get recognized by any piece of
software. Before closing up the machine, double and triple check BOTH
connections
I have this card on a g3 wall street and run it successfully on OS( and
10.1 and 10.2 now.
You should get an image of a card in the menu bar under OS10.2, but not 10.1
In OS9 an image of the card appears on the desktop.
In OS 9 there are two extensions which need to be switched on for firewire.
I have three dial up configurations, available to me in the 'locations',
and written into the network settings.
I tried to use the third, then discovered that its six digit password is
being overwritten, with the 8 digit one common to the other two
configurations.
I have tried using
I guess you read my update on this ...I rebooted in Os9 and then restarted
in OSX and the problem vanished. Restarting didn't do the trick.
I had the same Faxstf problem with OS10.1
I got round it somehow, but not with the modem centre. I remember
re-installing fax stf at some point before it
Yep Luis its a G3, and I am downloading the update now already , even as I
receive your message. Thanks.
9/1/04 10:45 am + Luis Sequeira [EMAIL PROTECTED] wrote:
You don't mention what machine it is, but just in case it may be useful:
I was totally unable to use the modem in my Wallstreet
9/1/04 10:50 am + Luis Sequeira [EMAIL PROTECTED] wrote:
In OS X, it should just work, without any drivers (mine does!). When
inserted, an icon should immediately appear on the menu bar. Make sure
that you fully insert the card; you may need to apply a little pressure.
Also, try it in the
20040109
From my experience--
In my WS 266 (os 9.2.1) I note that my NewerTech pc card, like all my
pc cards, must be carefully seated in either slot. If you are not
careful, you may misseat it and even damage the cage--apply slight
pressure to keep it going in level but pulled up toward
Oh, was that a western Didital drive too? Because i've just ordered one. I
don't suppose its a firewire 800 is it?
9/1/04 3:18 pm -0500 James G (Jim) Hardwick [EMAIL PROTECTED] wrote:
BTW, I had to buy a newer firewire card, from Western Digital, to work
with the firewire drive I bought.
Hello Folk,
Having installed OSX Jaguar 10.2:
Certain applications loaded at first, and later on quit on start up . All other
applications work ok, including big ones, and classic.
Ab dialler worked fine at first and now quits at start up with the dialogue 'unknown
error'
Memory stick just
hi all,
i got my wife an icurve to place her ti-book on and a wireless surfboard
brand wireless keyboard to go with it. it is an ibm PS/2 device, so i got an
usb adapter for it. it works fine with my pismo, but has an weird problem on
the g4. if i unplug it from the usb port, then replug it, the
On 1/9/04 10:31 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] Spew into the
Cybertrough:
hi all,
i got my wife an icurve to place her ti-book on and a wireless surfboard
brand wireless keyboard to go with it. it is an ibm PS/2 device, so i got an
usb adapter for it. it works fine with my pismo, but
on 10/01/04 03:41, John Plum at [EMAIL PROTECTED] wrote:
Hello Folk,
Having installed OSX Jaguar 10.2:
Certain applications loaded at first, and later on quit on start up . All
other applications work ok, including big ones, and classic.
Ab dialler worked fine at first and now quits
OK, I tried the LW 8 extension, it practically nerfed my system, so I
rebooted with all extensions on and trimmed away the ones that I was sure I
didn't need. I now have a LaserWriter 300 Icon on my desktop, but I'm still
getting the same error message when I try to print.
On 1/9/04 5:06 AM, Paul
19 matches
Mail list logo
