@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user
Yes, the same here, too. Seems to be like the system headers here (Arch x86_64)
typedef already (an
anonymous struct).
Regards,
Tobi
--
Live
release?
On Sat, Jul 7, 2012 at 6:55 PM, tobi tobiasboeg...@googlemail.com wrote:
On Sat, 07 Jul 2012, Sebastian Kulesz wrote:
Hi! I'm getting a compilation error when building the official Gambas
3.2.0 release. Happens both on a clean chroot or on my dirty system.
The full output
On Wed, 04 Jul 2012, Kevin Fishburne wrote:
On 07/04/2012 05:42 AM, Emil Lenngren wrote:
When you are declaring the array by writing
A[3] As Single
you declare an inline array, i.e. NOT a reference to an array.
So you cannot write
ThatStruct.A = AnArray.
Instead you have to copy the
:
Public Sub GridView1_ColumnClick(Column As Integer)
Print You clicked on column #;; Column
End
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat
On Fri, 22 Jun 2012, Benoît Minisini wrote:
Le 20/06/2012 21:38, tobi a écrit :
Hi Benoît,
this afternoon, we discovered that with a newer revision the program I
wrote to demonstrate sorting
of multi-dimensioned Variant[] broke. I again get Segfault when exporting
an overridden
On Sun, 24 Jun 2012, Benoît Minisini wrote:
Le 24/06/2012 12:40, tobi a écrit :
The demonstration project for our website is attached. I removed the Form
containing a GridView to
sort and some stuff and replaced it by a simple module file to test it with
the latest revision,
problem
in that function but found nothing).
Can you remember? - the subject of the mails was Segfault when overriding
Variant[] (1st May 2012).
Can you tell me something about the state of affairs?
Regards,
Tobi
--
Live Security Virtual
...) and the others most likely have sudo installed.
It would equally well end the discussion of the preferred graphical frontend -
only disadvantage I
can see: in this draft, there is no configuration possible, except for the
method of privilege
elevation.
Regards,
Tobi
) until (excluding) rev
#4715 so it would be
interesting what message you get and what revision you use... (and maybe what
the critical code
looks like)
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live
know that. Is there any piece of documentation to quote when
telling this someone?
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has
, you might be
able to spot it yourself - at least xdg-su seems not really complicated, even
to me who is not used
to shell scripting to that extend.
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event
, automatic completion would mean browsing all #included files each
time to search for keywords, but how do IDEs for C programming handle this?
You talked about IDEs but also vim as an editor can be made using ctags for
this purpose
Regards,
Tobi
above, it is not a
solution for future
gambas and I would strongly prefer OO over this but if you need it, why not...
Uhh, too late to respond to Randall's last post but I totally recommend his
last point.
Regards,
Tobi
On Sat, 09 Jun 2012, Benoît Minisini wrote:
Le 06/06/2012 20:12, tobi a écrit :
Hi,
I just moved to a new machine and tried to compile gambas3 again. On make,
I get with gb.desktop:
make[5]: Entering directory `/home/woodap/sources/gambas3/gb.desktop/src'
/bin/sh ../libtool --tag
on this machine (unlike on the old one where everything
got compiled).
Shouldn't the component be disabled by the configure script when required
headers are not found?
Regards,
Tobi
--
Live Security Virtual Conference
... This is a
technically not that complicated protocol, I think. Quickly googled, the gdb
seems to have
implemented a GDB remote protocol, too - what else?
(Written freely without security considerations)
Regards,
Tobi
--
Live
On Wed, 30 May 2012, Benoît Minisini wrote:
Le 30/05/2012 15:04, tobi a écrit :
Don't know how remote debugging programs like gdb or something work with
this, but a naive and
the more annoying-to-write approach could be a socket on the other side
which receives commands
On Sun, 20 May 2012, tobi wrote:
On Sun, 20 May 2012, Benoît Minisini wrote:
Le 20/05/2012 16:26, William Cabrera a écrit :
Hi, I have been testing the component ncurses and so far everything well,
but the functions mentioned in the title simply do not work. Below is a
sample code
On Thu, 24 May 2012, Bruce wrote:
On Wed, 2012-05-23 at 17:19 +0200, tobi wrote:
On Thu, 24 May 2012, Bruce wrote:
On Mon, 2012-05-21 at 22:25 +0200, Benoît Minisini wrote:
* Tree
* Graph
Native implementation of that would be interesting.
Any volunteer
On Thu, 24 May 2012, Bruce wrote:
On Thu, 2012-05-24 at 11:07 +0200, tobi wrote:
(Completely giving up anything I knew about binary trees now, because it
wasn't much and it wasn't
even from a book):
You said that you can traverse from any node in the tree.
No, any node can
only one of those as a generic
tree (graph) which is
then able to be inherited and specialised, maybe in gambas, - that's what I
find difficult (no
wonder without theory).
Regards,
Tobi
--
Live Security Virtual Conference
/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user
On my system I used /etc/ld.so.conf to store a custom library search path. This
file corresponds to
ldconfig(8).
Regards,
Tobi
information.
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint
that the interpreter spends only as long there as it
needs to process all
the pending events and refresh the GUI.
You can read that on: http://www.gambasdoc.org/help/cat/eventloop?v3
Regards,
Tobi
--
Live Security Virtual Conference
are nothing else? (Maybe gambas lacks templates or
something)
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can
On Mon, 21 May 2012, Demosthenes Koptsis wrote:
Στις 21/5/2012 22:56, ο/η tobi έγραψε:
On Mon, 21 May 2012, Demosthenes Koptsis wrote:
Basic languages have simple data structures like vars and arrays but
other languages
like c++ with the help of pointers can have advanced data structures
for my english, this is not my native language
--
William Cabrera
http://willicab.gnu.org.ve
This is a bug in the gb.ncurses component whose methods do not read
their string arguments correctly. Tobi are you here?
--
Benoît Minisini
and IMHO it looks nice - strange though for
the first moment when
you realise that half of a line is cut away and you cannot scroll. Alright,
it's not good for a UI
but this box is just a preview of things that are anyway only presented and as
that, it's purpose is
to look good.
Regards,
Tobi
or something if this is really considered a security issue - I don't think so
but I'm, too, not very
familiar with what could be done. I just want things clean)
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event
On Mon, 14 May 2012, Christer Johansson wrote:
Noted some issues last night...
First one is with Date(now). If assigned to a variable (or printed) it
adds placeholders for time as zeroes like...
05/14/2012 00:00:00
Second is regarding the Shell command. If I execute the following
On Sat, 12 May 2012, Christer Johansson wrote:
Anyone else having problem reaching http://gambasdoc.org? Been down whole
day
for me...
/CJ
--
Live Security Virtual Conference
Exclusive live event will cover
suppose further that it would not work since ncurses wants a terminal
to run in - AFAIK -
and I really can't say if the IDE console is a PTY or something that ncurses
accepts.
However, if you have enabled GUI components, try to disable them.
Regards,
Tobi
On Fri, 11 May 2012, Benoît Minisini wrote:
Le 11/05/2012 20:29, tobi a écrit :
Hi,
if I could read it correctly (you know why I began developing gb.ncurses? I
have no X running, I had
to use my framebuffer web browser to view the image, so I hope, it rendered
the picture entirely
components
do similar, so I have to rely on what I think to know about library
names...
(But I suppose, you and anyone else got this stuff installed...)
Regards,
Tobi
Same problem here. Ubuntu 12.04
Is it better with revision #4716?
--
Benoît Minisini
On Sun, 06 May 2012, Fabien Bodard wrote:
2012/5/6 tobi tobiasboeg...@googlemail.com
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 05/05/2012 14:01, Emanuele Sottocorno a écrit :
*** Warning: Linking the shared library gb.xml.html.la against the
loadable module
*** gb.xml.so
On Sun, 06 May 2012, Fabien Bodard wrote:
do it !
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond.
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 05/05/2012 03:42, Bruce Bruen a écrit :
On Sat, 2012-05-05 at 02:45 +0200, Benoît Minisini wrote:
Le 04/05/2012 23:34, Benoît Minisini a écrit :
I don't like any of those solution at the moment.
And if I define a compilation constant that
to know about library names...
(But I suppose, you and anyone else got this stuff installed...)
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 04/05/2012 21:59, tobi a écrit :
On Tue, 01 May 2012, tobi wrote:
Hu hu. It should be possible to override any class, but please provide a
project so that I can debug!
--
Benoît Minisini
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 05/05/2012 08:51, tobi a écrit :
Concerning the preprocessor... What about utilising the cpp just as a
command that runs over each
class and module file before seen by the compiler code? It's already
powerful enough or is that
too much
Hi gambas-users,
at http://www.gambas-buch.de you will find a website on which a book on the
Gambas programming
language will be published. After over 3 years of intensive research, now the
first chapters are
published. We place value on good description of the classes and components of
Gambas
On Sat, 05 May 2012, tobi wrote:
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 05/05/2012 08:51, tobi a écrit :
Concerning the preprocessor... What about utilising the cpp just as a
command that runs over each
class and module file before seen by the compiler code? It's already
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 05/05/2012 17:15, tobi a écrit :
Hi gambas-users,
at http://www.gambas-buch.de you will find a website on which a book on the
Gambas programming
language will be published. After over 3 years of intensive research, now
the first
On Sat, 05 May 2012, Benoît Minisini wrote:
Le 05/05/2012 15:30, tobi a écrit :
OK.
But just for interest, what do you mean by impossible to analyze? Excuse
me, but I haven't read
anything from the compiler yet. (When you say analyze, I think of line
numbers and stuff
On Tue, 01 May 2012, tobi wrote:
Hu hu. It should be possible to override any class, but please provide a
project so that I can debug!
--
Benoît Minisini
--
Live Security Virtual Conference
Main()
Dim hV As New Variant[]
End
--8-
I hope that it's possible to override native classes?
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security
On Tue, 01 May 2012, tobi wrote:
Hi,
I promptly get a segfault when I try to create an instance of my extended
Variant[]:
.src/Variant[].class
--8-
' Gambas class file
Export
Public Sub _compare(hV As Variant[]) As Integer
Return 0
End
--8-
.src
On Tue, 01 May 2012, Benoît Minisini wrote:
Le 01/05/2012 10:47, tobi a écrit :
On Tue, 01 May 2012, tobi wrote:
Hi,
I promptly get a segfault when I try to create an instance of my extended
Variant[]:
.src/Variant[].class
--8-
' Gambas class file
Export
Public
to compare the two values.
I tried to Private Sub MyCompare(V1 As Variant[], V2 As Variant[]) and got a
Segfault after one
line of wrong results when, in MyCompare, Print V1[0], V1[1] which are valid.
Regards,
Tobi
perhaps? I saw that there exist several Highlight*
classes that do the job for
quite some languages, so I _suppose_ that there's no such automatism?)
Regards,
Tobi
--
Live Security Virtual Conference
Exclusive live event
On Sat, 21 Apr 2012, trat50 wrote:
But Tobi, I have been drawing just fine on a DrawingArea.
The DrawingArea named Sky is the picture posted above...
I switched from a PictureBox to a DrawingArea because I couldn't draw on a
PictureBox.
Now I am back to the original problem... how
On Fri, 20 Apr 2012, trat50 wrote:
Thanks Tobi, Yes you are correct - this is on Gambas2.
I'll have to try that on a PictureBox. Initially I had everything for this
app on a PictureBox, but I didn't know how to draw on those. I'll see what
I can find in the texts, or maybe someone
On Sat, 21 Apr 2012, Karl Reinl wrote:
Salut Benoît,
the new gb.xml broke my project which used before gb.xml and
gb.xml.xslt.
As I can see, you wrote a gambas component also called gb.xml, which
replaced the old.
Now I struggle at xml.FromString() where xml is a XmlDocument, while you
On Sat, 21 Apr 2012, Charlie Reinl wrote:
Am Samstag, den 21.04.2012, 21:35 +0200 schrieb tobi:
On Sat, 21 Apr 2012, Karl Reinl wrote:
Salut Benoît,
the new gb.xml broke my project which used before gb.xml and
gb.xml.xslt.
As I can see, you wrote a gambas component also called
])
However, in GB3, the Grab method is entirely different. Refer to
http://www.gambasdoc.org/help/comp/gb.qt4/control/grab?v3
Regards,
Tobi
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know
On Fri, 20 Apr 2012, abbat wrote:
Thank you very very very much ))
Now it works as i need.
minthaka wrote:
What about Quit instead Me.Close?
2012/4/20, abbat abbat...@mail.ru:
It does not CLOSE.
Just try F5
If True then
Exec [ls]
Me.Close
EndIf
On Fri, 20 Apr 2012, trat50 wrote:
Hi Tobi, I just tried that - but it still blacks out anything not visible on
the computer monitor.
tobi-15 wrote:
If you are talking about GB2, you can do:
DrawingArea.Grab().Save(Path, [Quality])
However, in GB3, the Grab method
On Fri, 20 Apr 2012, Willy Raets wrote:
On do, 2012-04-19 at 22:06 +0100, Steve wrote:
Are there any docs to help
To try out gambasforge example
How to setup a gambas cgi webserver
Steve
All I could find is this:
.
For those also seeking for the paper, I will push Hans to put it on
http://www.gambas-buch.de/.
Regards,
Tobi
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your
list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user
For this purpose, you have the Window_Close() event.
Regards,
Tobi
--
For Developers, A Lot Can Happen In A Second.
Boundary
of array and its size must be available and
thus are written
before the actual data. You may want to use the
Write #File, \x00\x00\x00\x00, 4
syntax. Haven't tried but should work.
Regards,
Tobi
--
For Developers, A Lot
goes on but a yes/no/look at the stuff answer.
Regards,
Tobi
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE
On Sat, 07 Apr 2012, Charlie Reinl wrote:
Am Samstag, den 07.04.2012, 20:06 +0200 schrieb tobi:
Hi,
I know a pretty bunch of components that I don't intend to compile on my
system (because I don't
want my box to satisfy their dependencies). May it be possible to
explicitly exclude
fails?
regards,
tobi
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
___
Gambas-user mailing list
Gambas-user
the content, it really should work.
regards,
tobi
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
___
Gambas-user
hi,
On Mon, 26 Mar 2012, tobi wrote:
On Mon, 26 Mar 2012, Rolf-Werner Eilert wrote:
Am 25.03.2012 14:42, schrieb tobi:
Benoît,
do you think an ncurses component would be useful? i abandoned the X
server with the beginning of
the year and when i noticed that i would need
On Wed, 28 Mar 2012, Benoît Minisini wrote:
Le 28/03/2012 21:29, tobi a écrit :
hi,
On Mon, 26 Mar 2012, tobi wrote:
On Mon, 26 Mar 2012, Rolf-Werner Eilert wrote:
Am 25.03.2012 14:42, schrieb tobi:
Benoît,
do you think an ncurses component would be useful? i abandoned the X
, iStart - 1) Mid$(sWholeText, iEnd)
which then is the parts before and after the found strings.
there may be off-by-one errors, i couldn't try it, but you get the idea.
regards,
tobi
--
This SF email is sponsosred by:
Try
On Mon, 26 Mar 2012, Rolf-Werner Eilert wrote:
Am 25.03.2012 14:42, schrieb tobi:
Benoît,
do you think an ncurses component would be useful? i abandoned the X server
with the beginning of
the year and when i noticed that i would need a console ide for gambas, i
began writing one
or a
valuable addition?
(hope, the accent works, i searched about an hour for that - and can't even see
the result)
regards,
tobi
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http
may be chosen automatically, which is often a good service!) in that
application to
evaluate parameters.
i haven't used any WebPage so far, i just read about it here, so i may have a
wrong understanding of
how it works and where it would be used. sorry if that's the case.
regards,
tobi
hi,
On Sat, 17 Mar 2012, Randall Morgan wrote:
You could call ping on a know external server and then examine the
results...
Or simply loop trying to use curl to connect to an external server.
On Sat, Mar 17, 2012 at 5:05 AM, Bill-Lancaster
bill-lancas...@lineone.netwrote:
...?
do they persist in gambas3? i can't check anything now.
regards,
tobi
--
Try before you buy = See our experts in action!
The most comprehensive online learning library for Microsoft developers
is just $99.99! Visual
the problem may be elsewhere. to
follow this assumption
we must know anyway if your sources match the above characteristics (long
lines/huge source
files).
regards,
tobi
--
Virtualization Cloud Management Using Capacity
EXEC
[killall, prgname] which will call the program killall with prgname as
parameter.
regards,
tobi
--
Virtualization Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud
mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user
won't gbx3 --version (or gbx2) do the trick?
i don't consider it that important but shouldn't it be accessible from within,
like from a constant
in the interpreter?
regards,
tobi
haven't programmed in Gambas for about a month and have no
possibility to check my
suggestions but i think you see the point.
regards,
tobi
--
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive
to
any pixel in the 8*8px Image or not to do it and some other experiments
but nothing worked on the entire project. there's always something
transparent or black or whatever. I really go nuts with this. Anyone to
my rescue?
Regards,
Tobi
wait a minute. I forgot to say that I don't even
78 matches
Mail list logo
