On Thu, 2011-07-21 at 06:26 +0100, Mick wrote:
> On Thursday 21 Jul 2011 03:29:17 Adam Carter wrote:
> > amd64 means any x86 64bit platform, so Intel too.
> >
> > march=native is good if you're not using distcc, or if you're only
> > using distcc on core2 boxes. Otherwise be specific.
>
> I recom
On Thursday 21 Jul 2011 03:29:17 Adam Carter wrote:
> amd64 means any x86 64bit platform, so Intel too.
>
> march=native is good if you're not using distcc, or if you're only
> using distcc on core2 boxes. Otherwise be specific.
I recommend using the "64 bit profile (amd64) for >= GCC 4.3" which
amd64 means any x86 64bit platform, so Intel too.
march=native is good if you're not using distcc, or if you're only
using distcc on core2 boxes. Otherwise be specific.
Hi everyone,
Today, I ordered a new desktop from Dell (offer too good to pass up!).
The system is a Dell XPS 8300 with an Intel Core i7 processor. I was
reading the Gentoo wiki about safe CFLAGS and it said that march=native
is recommended if I use gcc >= 4.2.3.
I looked at processor specific C
On Wed, Jul 20, 2011 at 7:54 PM, kashani wrote:
> On 7/20/2011 4:08 PM, Grant wrote:
I ran into an out of memory problem. The first mention of it in the
kernel log is "mysqld invoked oom-killer". I haven't run into this
before. I do have a swap partition but I don't activate
On Tue, 2011-07-19 at 09:06 -0400, Michael Orlitzky wrote:
> On 07/18/2011 11:08 PM, Jeff Cranmer wrote:
> >
> >
> > Pardon my additional questions before taking the plunge here.
> >
> > So, given that I have three devices, /dev/sda, /dev/sdb and /dev/sdc, if
> > I run the command mdadm --asse
> The easiest thing to try is to turn off keepalives so child processes
> aren't hanging around keeping connections up.
KeepAliveTimeout defaults to 5 seconds, so that shouldn't be a
significant problem, and you get the efficiency of persistence and
probably pipelining too.
Could be worth reduc
On Wednesday, July 20 at 23:43 (+0200), Stefan G. Weichinger said:
[...]
> Are there any recommended kernel-config-settings for a performant and
> non-drifting KVM-server?
Well, KVM_CLOCK obviously:
KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
select PARAV
On 7/20/2011 4:08 PM, Grant wrote:
I ran into an out of memory problem. The first mention of it in the
kernel log is "mysqld invoked oom-killer". I haven't run into this
before. I do have a swap partition but I don't activate it based on
something I read previously that I later found out was w
> Does it sound like apache2 was using up all the memory? If so, should
> I look further for a catalyst or did this likely happen slowly? What
> can I do to prevent it from happening again? Should I switch apache2
> from prefork to threads?
Do you need the full 256 instances?
How many simultan
On Wednesday 20 July 2011 18:36:39 Michael Orlitzky wrote:
> On 07/20/2011 07:53 AM, Nikos Chantziaras wrote:
> > On 07/18/2011 11:45 PM, Bill Longman wrote:
> >> On 07/18/2011 06:50 AM, Volker Armin Hemmann wrote:
> >>> On Monday 18 July 2011 14:30:28 Stroller wrote:
> On 18 July 2011, at 12:
On Wednesday 20 July 2011 15:20:43 Stroller wrote:
> On 19 July 2011, at 15:43, Volker Armin Hemmann wrote:
> >>> …
> >>> But we should put up with you trolling around and then acting all
> >>> insulted and whiney when told to stop it?
> >>
> >> Unless there is some family or intimate connection t
>> I ran into an out of memory problem. The first mention of it in the
>> kernel log is "mysqld invoked oom-killer". I haven't run into this
>> before. I do have a swap partition but I don't activate it based on
>> something I read previously that I later found out was wrong so I
>> suppose I sh
On Wednesday 20 July 2011 15:33:48 walt did opine thusly:
> I've been trying to share /usr/portage on a gentoo host with a
> virtualbox gentoo guest, but I'm having an identity crisis ;)
>
> The /usr/portage/ share mounts perfectly on the gentoo guest,
> but even root (on the gentoo guest) can't w
On 07/20/2011 07:53 AM, Nikos Chantziaras wrote:
> On 07/18/2011 11:45 PM, Bill Longman wrote:
>> On 07/18/2011 06:50 AM, Volker Armin Hemmann wrote:
>>> On Monday 18 July 2011 14:30:28 Stroller wrote:
On 18 July 2011, at 12:18, Mick wrote:
> Is it a matter of waiting a bit longer?
>>
I've been trying to share /usr/portage on a gentoo host with a
virtualbox gentoo guest, but I'm having an identity crisis ;)
The /usr/portage/ share mounts perfectly on the gentoo guest,
but even root (on the gentoo guest) can't write to the shared
portage directory.
After hours of googling and p
On 07/20/2011 12:37 PM, Neil Bothwick wrote:
> On Wed, 20 Jul 2011 14:16:06 + (UTC), Grant Edwards wrote:
>
>>> Every time after you emerge xorg you're meant to remerge its drivers
>>> (evdev being one of them). Usually there is some elog message
>>> telling you to run qfile to find what is n
On Wednesday 20 July 2011 10:39:00 kashani did opine thusly:
> On 7/19/2011 1:47 PM, Alan McKinnon wrote:
> > The price difference is substantial. Considering that my usage
> > is
> > nothing more stressful than KDE eye-candy and mplayer, is the
> > IPS
> > screen worth the extra price? OTOH the ma
On Wednesday 20 July 2011 13:30:05 Grant did opine thusly:
> I ran into an out of memory problem. The first mention of it in the
> kernel log is "mysqld invoked oom-killer". I haven't run into this
> before. I do have a swap partition but I don't activate it based
> on something I read previousl
On Thu, Jul 21, 2011 at 12:43 AM, Stefan G. Weichinger wrote:
>
> Maybe a bit OT, but otherwise close to gentoo as well (as we all
> configure our kernels individually ) (see ps below):
>
> When I configure my gentoo-server for Linux KVM, how to get the
> clock-issues right, in terms of correc
Maybe a bit OT, but otherwise close to gentoo as well (as we all
configure our kernels individually ) (see ps below):
When I configure my gentoo-server for Linux KVM, how to get the
clock-issues right, in terms of correctness and performance?
I assume that I am not the only one scratching hi
On 07/20/2011 11:49 AM, Joost Roeleveld wrote:
> On Monday 04 July 2011 09:30:27 Grant wrote:
>> I'm reading that ASUS and Gigabyte are the way to go for reliability.
>
> Don't forget Tyan. The workstation board I have here has been rock-solid even
> in really bad "atmospheric" conditions (large
On Wed, Jul 20, 2011 at 3:30 PM, Grant wrote:
> I ran into an out of memory problem. The first mention of it in the
> kernel log is "mysqld invoked oom-killer". I haven't run into this
> before. I do have a swap partition but I don't activate it based on
> something I read previously that I lat
>> ...
>> I was thinking about this. The digital HDMI signal must be converted
>> into an analog signal at some point if it's being represented as light
>> on a TV screen. Electrical interference generated by the computer and
>> traveling up the HDMI wire should have its chanc
I ran into an out of memory problem. The first mention of it in the
kernel log is "mysqld invoked oom-killer". I haven't run into this
before. I do have a swap partition but I don't activate it based on
something I read previously that I later found out was wrong so I
suppose I should activate i
> LD .tmp_vmlinux1
> arch/x86/built-in.o: In function `microcode_init':
> microcode_core.c:(.init.text+0xaeb5): undefined reference to
> `init_intel_microcode'
> make: *** [.tmp_vmlinux1] Error 1
>
this should not happen: if you selected any module from the kernel tree to be
built into the
On 2011-07-20, Alan McKinnon wrote:
> On Wednesday 20 July 2011 14:16:06 Grant Edwards did opine thusly:
>> On 2011-07-20, Mick wrote:
>> > Every time after you emerge xorg you're meant to remerge its
>> > drivers (evdev being one of them). Usually there is some elog
>> > message telling you to
On Monday 04 July 2011 09:30:27 Grant wrote:
> I'm reading that ASUS and Gigabyte are the way to go for reliability.
Don't forget Tyan. The workstation board I have here has been rock-solid even
in really bad "atmospheric" conditions (large temperature and humidity
differences) and a dodgy power
>> > --snip--
>> >
>> >>> The TV is an LG 47LH90 and and it is said to do 1080p. I looked for
>> >>> ghosting in 16:9 mode instead of Just Scan mode and strangely the
>> >>> shadows are there, but they're oriented top and bottom instead of left
>> >>> and right. I can take another photo if anyone
Hi,
Thanks very much, that works!
Best regards,
Giedrius Kudelis
on 07/20/2011 09:32 PM Giedrius Kudelis wrote the following:
> Hello,
>
> I'm new to this mailing list, so greetings to everyone!
>
> I am having some trouble starting nginx while some of the network interfaces
> are down. Running "/etc/init.d/nginx ineed" gives me
>
> fsck localmount dhcpcd net
On 7/19/2011 1:47 PM, Alan McKinnon wrote:
The price difference is substantial. Considering that my usage is
nothing more stressful than KDE eye-candy and mplayer, is the IPS
screen worth the extra price? OTOH the machine has VGA, HDMI and
DisplayPort as well as internal screen and I believe the
Hello,
I'm new to this mailing list, so greetings to everyone!
I am having some trouble starting nginx while some of the network interfaces
are down. Running "/etc/init.d/nginx ineed" gives me
fsck localmount dhcpcd net.eth0 net.eth1 net.lo
I guess this means that all the net.* interfaces have
Hi,
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
-Michael
On Wed, Jul 20, 2011 at 12:46 PM, Alan McKinnon wrote:
> On Wednesday 20 July 2011 12:28:49 Michael Mol did opine thusly:
>> It's good for pair programming scenarios, really. Although if you
>> don't need to worry about that kind of scenario, having only a
>> narrow accurate view angle might be a
On Wednesday 20 July 2011 12:28:49 Michael Mol did opine thusly:
> On Wed, Jul 20, 2011 at 12:06 PM, Alan McKinnon
wrote:
> > On Wednesday 20 July 2011 16:09:58 Stroller did opine thusly:
> >
> > It's true that the IPS does have a fantastic viewing angle. I
> > only started seeing bothersome col
On Wed, 20 Jul 2011 14:16:06 + (UTC), Grant Edwards wrote:
> > Every time after you emerge xorg you're meant to remerge its drivers
> > (evdev being one of them). Usually there is some elog message
> > telling you to run qfile to find what is need to be reinstalled:
> >
> > qlist -I -C x11-
On Wednesday 20 July 2011 14:16:06 Grant Edwards did opine thusly:
> On 2011-07-20, Mick wrote:
> > Every time after you emerge xorg you're meant to remerge its
> > drivers (evdev being one of them). Usually there is some elog
> > message telling you to run
> >
> > qfile to find what is need to
On Wed, Jul 20, 2011 at 12:06 PM, Alan McKinnon wrote:
> On Wednesday 20 July 2011 16:09:58 Stroller did opine thusly:
> It's true that the IPS does have a fantastic viewing angle. I only
> started seeing bothersome colour shifts at about a 70degree angle
> viewed from the 10 o'clock position. Wh
Hello,
Just upgrading from 2.6.38-gentoo-r6 to 2.6.39-gentoo-r3 and I'm getting the
following error:
LD .tmp_vmlinux1
arch/x86/built-in.o: In function `microcode_init':
microcode_core.c:(.init.text+0xaeb5): undefined reference to
`init_intel_microcode'
make: *** [.tmp_vmlinux1] Error 1
An
on 07/20/2011 07:06 PM Alan McKinnon wrote the following:
> now to google how good the linux driver support is (my last ATI GPU
> was 6 years ago)
>
I would choose nvidia, just for the driver support, but also make sure
the thing doesn't suffer overheating...
On Wednesday 20 July 2011 07:30:11 Mick did opine thusly:
> On Tuesday 19 Jul 2011 21:47:38 Alan McKinnon wrote:
> > Notebook renewal time has rolled around again, I've had the old
> > one for 3 years now. Amazing how much can change in 3 years. I
> > don't do notebook support so my knowledge is al
On Wed, Jul 20, 2011 at 10:14 AM, Kfir Lavi wrote:
>
>
> On Wed, Jul 20, 2011 at 6:01 PM, Paul Hartman
> wrote:
>>
>> On Wed, Jul 20, 2011 at 9:31 AM, Paul Hartman
>> wrote:
>> > On Wed, Jul 20, 2011 at 5:43 AM, Kfir Lavi wrote:
>> >>
>> >>
>> >> On Tue, Jul 19, 2011 at 11:38 PM, Paul Hartman
>
On Wednesday 20 July 2011 16:09:58 Stroller did opine thusly:
> On 19 July 2011, at 21:47, Alan McKinnon wrote:
> > ...
> > Screens; a choice between
> > 1920x1080 WLED
> > 1920x1080 RGBLED IPS
> >
> > The IPS screen only comes with an NVIDIA Quadro 2000M with 2GB
> > GDDR3, The regular screen com
On Wed, Jul 20, 2011 at 10:29 AM, Stroller
wrote:
>
> On 19 July 2011, at 20:41, Grant wrote:
>> ...
>> I found this:
>>
>> "We recommend using the Just Scan mode with 1080i and 1080p material,
>> which assures zero overscan and proper 1:1 pixel matching for this
>> 1080p display."
>>
>> http://re
On Wed, Jul 20, 2011 at 6:01 PM, Paul Hartman wrote:
> On Wed, Jul 20, 2011 at 9:31 AM, Paul Hartman
> wrote:
> > On Wed, Jul 20, 2011 at 5:43 AM, Kfir Lavi wrote:
> >>
> >>
> >> On Tue, Jul 19, 2011 at 11:38 PM, Paul Hartman
> >> wrote:
> >>>
> >>> Hi,
> >>>
> >>> I emerged ulogd-2.0.0_beta4
On 19 July 2011, at 21:47, Alan McKinnon wrote:
> ...
> Screens; a choice between
> 1920x1080 WLED
> 1920x1080 RGBLED IPS
>
> The IPS screen only comes with an NVIDIA Quadro 2000M with 2GB GDDR3,
> The regular screen comes with these choices of video card:
>
> AMD FirePro M5950 Mobility Pro with
On Wed, Jul 20, 2011 at 9:31 AM, Paul Hartman
wrote:
> On Wed, Jul 20, 2011 at 5:43 AM, Kfir Lavi wrote:
>>
>>
>> On Tue, Jul 19, 2011 at 11:38 PM, Paul Hartman
>> wrote:
>>>
>>> Hi,
>>>
>>> I emerged ulogd-2.0.0_beta4 and using the ulogd.conf that was
>>> installed by portage, it fails to start
On Wednesday 20 Jul 2011 15:16:06 Grant Edwards wrote:
> On 2011-07-20, Mick wrote:
> > Every time after you emerge xorg you're meant to remerge its drivers
> > (evdev being one of them). Usually there is some elog message telling
> > you to run
> >
> > qfile to find what is need to be reinstall
On Wed, Jul 20, 2011 at 5:43 AM, Kfir Lavi wrote:
>
>
> On Tue, Jul 19, 2011 at 11:38 PM, Paul Hartman
> wrote:
>>
>> Hi,
>>
>> I emerged ulogd-2.0.0_beta4 and using the ulogd.conf that was
>> installed by portage, it fails to start. I get this message in the
>> log:
>>
>> Tue Jul 19 15:32:08 201
On 19 July 2011, at 20:41, Grant wrote:
> ...
> I found this:
>
> "We recommend using the Just Scan mode with 1080i and 1080p material,
> which assures zero overscan and proper 1:1 pixel matching for this
> 1080p display."
>
> http://reviews.cnet.com/flat-panel-tvs/lg-47lh90/4505-6482_7-33485570
On 19 July 2011, at 15:43, Volker Armin Hemmann wrote:
>>> …
>>> But we should put up with you trolling around and then acting all
>>> insulted and whiney when told to stop it?
>>
>> Unless there is some family or intimate connection the rest of us are
>> unaware of, there are no grounds for you
On 2011-07-20, Mick wrote:
> Every time after you emerge xorg you're meant to remerge its drivers (evdev
> being one of them). Usually there is some elog message telling you to run
> qfile to find what is need to be reinstalled:
>
> qlist -I -C x11-drivers/
I've always wondered why, if port
On 20 July 2011, at 12:20, Thanasis wrote:
> http://dl.dropbox.com/u/14040344/7-Oct-2010_portage.tar.bz2
Got it! Thanks!
Stroller.
On 20 July 2011, at 10:03, Joost Roeleveld wrote:
> On Saturday 16 July 2011 17:53:48 Stroller wrote:
>> A bit of a long shot, this, but has anyone got any older Portage snapshots
>> kicking around, by any chance?
>>
> ...
> If you are still looking, I have the following:
>
> portage-20100128.ta
Francisco Ares writes:
> On Wed, Jul 20, 2011 at 3:20 AM, Dale wrote:
> > Mick wrote:
> >> Every time after you emerge xorg you're meant to remerge its drivers
> >> (evdev being one of them). Usually there is some elog message telling
> >> you to run
> >>
> >> qfile to find what is need to be r
On 07/18/2011 11:45 PM, Bill Longman wrote:
On 07/18/2011 06:50 AM, Volker Armin Hemmann wrote:
On Monday 18 July 2011 14:30:28 Stroller wrote:
On 18 July 2011, at 12:18, Mick wrote:
Is it a matter of waiting a bit longer?
Yes, I think he'll be eligible for parole beginning 2023.
please re
On Wed, Jul 20, 2011 at 3:20 AM, Dale wrote:
> Mick wrote:
>
>>
>> Every time after you emerge xorg you're meant to remerge its drivers
>> (evdev
>> being one of them). Usually there is some elog message telling you to run
>> qfile to find what is need to be reinstalled:
>>
>> qlist -I -C x11-
On Wed, Jul 20, 2011 at 3:05 AM, Mick wrote:
> On Wednesday 20 Jul 2011 04:38:37 Francisco Ares wrote:
> > On Wed, Jul 20, 2011 at 12:10 AM, Francisco Ares
> wrote:
> > > On Wed, Jul 20, 2011 at 12:05 AM, Grant Edwards
> > > > >
> > > > wrote:
> > >> On 2011-07-20, Francisco Ares wrote:
> > >>
http://dl.dropbox.com/u/14040344/7-Oct-2010_portage.tar.bz2
On Wed, Jul 20, 2011 at 1:55 AM, Volker Armin Hemmann
wrote:
> On Tuesday 19 July 2011 13:48:45 Bill Longman wrote:
>> On 07/19/2011 07:43 AM, Volker Armin Hemmann wrote:
>> > On Tuesday 19 July 2011 12:39:09 Stroller wrote:
>> >> On 19 July 2011, at 00:36, Volker Armin Hemmann wrote:
>> >> Unless
On Tue, Jul 19, 2011 at 11:38 PM, Paul Hartman <
paul.hartman+gen...@gmail.com> wrote:
> Hi,
>
> I emerged ulogd-2.0.0_beta4 and using the ulogd.conf that was
> installed by portage, it fails to start. I get this message in the
> log:
>
> Tue Jul 19 15:32:08 2011 <8> ulogd.c:1179 not even a single
Sometimes found re emerge xfce packages have helped with problems in particular
xfce4-panel xfce4-session xfdesktop xfwm4
Jdm
--Original Message--
From: András Csányi
To: Gentoo
ReplyTo: Gentoo
Subject: [gentoo-user] xfce (window manager)
Sent: 20 Jul 2011 09:49
Dear All,
I would like t
On Saturday 16 July 2011 17:53:48 Stroller wrote:
> A bit of a long shot, this, but has anyone got any older Portage snapshots
> kicking around, by any chance?
>
> I have a box which hasn't been updated in 2 - 3 years. It would normally be
> easiest to format and reinstall, but in this case the bo
Top-posting IMPORTANT NOTE ON TOP
Do NOT create the file I mention below unless you WANT to risk deleting ALL
your files.
On Tuesday 19 July 2011 15:58:44 Florian Philipp wrote:
> The double dash will prevent mv from interpreting weird file names like
> "-h" as parameters. Just about every stand
Dear All,
I would like to ask the community anybody has experienced any problems
regarding xfce?
My problem is that after update the window decorators (window border,
header the buttons on the left side [close, minimize, etc]) are
missing. I'm sorry I'm not sure the window decorators definition is
66 matches
Mail list logo
