you could first pipe portage output to tee perhaps portage.log for a file
to hold output then use grep on portage.log to find notifications in
context sofollowing lines of notifications would be preserved. I've not
used grep with lines of context before yet so don't know how that feature
would
kde hasn't been accessible enough for screen reader users like me to
install it and use it. That out of the way, could that be kde locking
your screen for you using a 1 minute time limit? If so, maybe that can be
adjusted. The gsettings app likely isn't on your machine so it won't help
for me
I found a solution that worked for the gpg warning about /etc/portage/gpg
not having safe ownership.
The gnupg directory had to be backed up and I needed to run uto again and
uto took some time processing the keys but it got it done.
--
Jude
"There are four boxes to be used in defense of
What is correct permissions for /etc/portage/gpg?
I've got a warning that directory is unsafe.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
Found out nproc is a command and my machine returns 16 when that command
got run.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Tue, 4 Jun 2024, Jude DaShiell wrote:
> How
How is the number of threads nproc can handle printed out to the terminal?
On an earlier install try I had J7,l8 put in /etc/portage/make.conf since
the computer has 14gb of available memory on it.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
It went on irc.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Fri, 31 May 2024, Nuno Silva wrote:
> On 2024-05-31, Kévin GASPARD DE RENEFORT wrote:
>
> > Is this not possible to go, as I
order."
Ed Howdershelt 1940.
On Fri, 31 May 2024, Jude DaShiell wrote:
> What's missing in those instructions is:
> x
> 1
> n
> /boot
> r
> that's for the fdisk instructions.
>
>
>
What's missing in those instructions is:
x
1
n
/boot
r
that's for the fdisk instructions.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
I got:
sha256sum --check
stage3-amd64-desktop-openrc-20240526T163557Z.tar.xz.sha256
stage3-amd64-desktop-openrc-20240526T163557Z.tar.xz: OK
sha256sum: WARNING: 12 lines are improperly formatted
Is the warning significant?
--
Jude
"There are four boxes to be used in defense of liberty:
soap,
My machine has protected mbr with gpt partitions on it. Are those kind of
partitions hybrid?
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Mon, 27 May 2024, Jack wrote:
> On 2024.05.26 07:11, Jude DaShiell wrote:
> >I have tried a couple different things so linux-firmware and other
> >packages can find t
elatively recent news items as they may affect how you
> install a binary kernel and initramfs (I don't use this kernel here to know
> its nuances):
>
> https://www.gentoo.org/support/news-items/2024-03-12-debianutils-installkernel.html
>
> https://www.gentoo.org/support/news-item
te of affairs.
>
> Please read these relatively recent news items as they may affect how you
> install a binary kernel and initramfs (I don't use this kernel here to know
> its nuances):
>
> https://www.gentoo.org/support/news-items/2024-03-12-debianutils-installkernel.html
>
you
> install a binary kernel and initramfs (I don't use this kernel here to know
> its nuances):
>
> https://www.gentoo.org/support/news-items/2024-03-12-debianutils-installkernel.html
>
> https://www.gentoo.org/support/news-items/2024-05-17-dracut-ext-kmods.html
>
>
> O
ed any steps:
>
> https://wiki.gentoo.org/wiki/GRUB#UEFI_with_GPT
>
>
> On Monday, 27 May 2024 14:05:49 BST Jude DaShiell wrote:
> > grub-update found boot partition in /dev/sda3. The problem I now have is
> > I cannot boot into gentoo.
> > The efibootmgr prog
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Mon, 27 May 2024, Dale wrote:
> Jude DaShiell wrote:
> > Here's the script I used to get from an existing system into the gentoo
> &g
changed to conform to the
discoverable standard mentioned in the handbook.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Mon, 27 May 2024, Jude DaShiell wrote:
> I think I fixe
oBo firmware to boot the system directly
> without a 3rd party bootloader, then you can mount the ESP on /boot and create
> a /boot/EFI directory to place your kernel file executables there.
>
> The default is as per item 1 above.
>
>
> On Monday, 27 May 2024 10:05:40 BST Jude Da
p, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Mon, 27 May 2024, Jude DaShiell wrote:
> After having followed the handbook I end up with /boot in /sda3 even
> though mount /dev/sda1 /mnt/gentoo/efi had been run and /dev/sda1 is vfat
> 32 format a
After having followed the handbook I end up with /boot in /sda3 even
though mount /dev/sda1 /mnt/gentoo/efi had been run and /dev/sda1 is vfat
32 format and is efi system.
What did I do wrong?
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
e use in that order."
Ed Howdershelt 1940.
On Sun, 26 May 2024, Jude DaShiell wrote:
> I'm getting a pair of errors when I do emerge linux-firmware:
> undefined license group
> emerge Assuming no boot partition
>
>
>
I'm getting a pair of errors when I do emerge linux-firmware:
undefined license group
emerge Assuming no boot partition
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
re is a /binpackages/ subdirectory on the mirror it will contain the
> precompiled binary packages and given you are running a modern CPU, you should
> set /x86-64-v3 in your binrepos.conf.
>
> HTH.
>
> On Friday, 24 May 2024 13:29:46 BST Jude DaShiell wrote:
> > Michael,
Michael,
The changes you selected worked. I got mirrorselect compiled and ran it
and got http ftp and rsync repos defined. I'm wondering have all of the
gentoo mirrors got binaries?
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use
Portage 3.0.63 (python 3.11.9-final-0, default/linux/amd64/23.0/desktop,
gcc-13, glibc-2.39-r6, 6.6.7 x86_64)
=
System Settings
=
System uname:
but 23.0,
> > which uses a merged /usr directory structure.
> >
> > Consequently, select profile 23:
> >
> > [23] default/linux/amd64/23.0/desktop (stable)
> >
> > On Wednesday, 22 May 2024 15:53:11 BST Jude DaShiell wrote:
> > > I used bash but
>
>
> On Wednesday, 22 May 2024 14:45:40 BST Michael Orlitzky wrote:
> > On Wed, 2024-05-22 at 09:40 -0400, Jude DaShiell wrote:
> > > Yes, this is during installation.
> > > I did type:
> > > mount --rbind /dev /mnt/gentoo/dev
> > > I was outside
Yes, this is during installation.
I did type:
mount --rbind /dev /mnt/gentoo/dev
I was outside of chroot at the time but that's all I did with dev before
running emerge-webrsync.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that
This one is the last two lines of output.
Failed to validate a sane '/dev'.
bash process substitution doesn't work; this may be an indication of a
broken '/dev/fd'.
What did I do wrong?
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please
line to test if a symlink exists to /run/shm/ from /dev/shm is only needed
> when you use non-Gentoo live media to install your system.
>
> With the Gentoo installation media, whether you use the minimal CD or the
> admincd, such an action is not needed.
>
>
> On Tuesday, 21 M
I am installing gentoo to a different disk on the machine and the
install-x86_64-minimal disk is not fit for purpose since I cannot get
espeak reading the screen as I go through an installation.
Most things are pointed at /mnt/gentoo on my system when doing commands.
However in lines where proc is
What happens as root running:
What happens running:
alsactl init;amixer set Master 100% unmute;alsactl store
Using screen readers on linux systems I've had a few of these problems
from time to time.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
On one computer I had it came with an Alien ATX case. If memory serves
that one had a top fan. The only thing I didn't like about that case was
not enough slots for two drive sleds in addition to the dvd burner. Only
one sled could be accommodated.
-- Jude "There are four boxes to be used in
If pipewire is used, and wireplumber isn't already on the machine it's
time to install it and allow the install to remove a soon deprecated
pipewire-media-manager package. That may help.
If pulseaudio is used could be pulseaudio --cleanup-shm needs doing.
In either case, I'd first run alsactl
Linux is being targeted by ransomware and other forms of malware so it may
be worthwhile to run ferensics on your backup and find what ferensics have
to tell you. After check and see if any of what you found out were false
positives.
-- Jude "There are four boxes to be used in
defense of
If I understand your question, this may help. Understand prog is the
program that errors out in this example:
prog 2>&1 | tee prog.err
Look for all output including errors in the file prog.err which tee will
have created for you and before opening prog.err try wc-l prog.err and
grep -i error
Another possibility is to write down encrypted passwords and don't
disclose encryption technique. The rot13 is worthless.
-- Jude "There are four boxes to be used in
defense of liberty: soap, ballot, jury, and ammo. Please use in that
order." Ed Howdershelt 1940.
On Wed, 20 Sep 2023, Hoël
another possibility is use of a dictionary. Find a word in dictionary
note page column and line. Divide pages in dictionary by 2 and either add
or subtract that number of pages to or from page word is found on then on
the new page find the column and line for your actual password. Of
course,
I generate random passwords using dice. First and last characters in
passwords are letters that's arbitrary buys more time. Those should have
lengths over 13 and before the agency I used to work for went to
smartcards and 256 character random passwords their last standard was 16
characters with
On a previous computer, I had an Alien ATX case. The one drawback with
that case was only one drive slot for a DVD drive. I prefer computer
cases with a few more than that so internal drive sleds can be installed.
When onboard cards break, if you have spare pci slots available and spare
cash you
Thanks, I'll try that tonight.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Wed, 6 Sep 2023, Michael wrote:
> On Wednesday, 6 September 2023 16:04:33 BST Jude DaShiell wrote:
&
These days I'm having better luck downloading through bittorrent and
seeding rather than doing direct downloads with wget. Problem with direct
downloads on large files files come down corrupted and don't verify when I
try to verify them. It is probably a bad internet network connection.
I'm
To clarify, that's the gentoo minimal iso I think John uses to install.
So far as I know the live iso hasn't got espeak built into its kernel.
-- Jude "There are four boxes to be used in
defense of liberty: soap, ballot, jury, and ammo. Please use in that
order." Ed Howdershelt 1940.
On Tue, 2
>
>
> On 4/24/23 16:36, Jude DaShiell wrote:
> > Okay, that means you had an error free boot without fatals and without
> > warnings.
> >
> >
> > -- Jude "There are four boxes to be used in
> > defense of liberty: soap, ballot, jury, and ammo. Pleas
None of them produce any output:
> - dmesg| grep -i fatal
> - dmesg| grep -i error
> - dmesg| grep -i warn
>
>
> On 4/24/23 16:11, Jude DaShiell wrote:
> > After a boot,
> > dmesg| grep -i fatal && dmesg|grep -i error&| grep -i warn
> > may he
After a boot,
dmesg| grep -i fatal && dmesg|grep -i error&| grep -i warn
may help. If I were doing that for my own uses, I'd include titles and
read statements in the command. All of that could be redirected by means
of non-destructive appends to a file too.
-- Jude "There are four boxes to
If that works and I were to use chattr +i it might be useful to make a
list of what's now immuteable so later adjustments could be made when
appropriate.
-- Jude "There are four boxes to be used in
defense of liberty: soap, ballot, jury, and ammo. Please use in that
order." Ed Howdershelt 1940.
My guess is gentoo includes the chattr utility. Does emerge respect
chattr +i /etc/hosts?
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Mon, 17 Apr 2023, Frank Steinmetzger wrote:
> Am Mon,
I'll go on a guess alsa got installed on the system. If that is correct,
please try a command as root in terminal if necessary or on console:
amixer set Master 100% unmute && alsactl store && aplay
/usr/share/sounds/alsa/Front_Center.wav
It's possible that doesn't work because
will experiment later today to see if I can boot from the second older
drive. That older machine gave good service for 8 years.
On Sun, 17 Apr 2022, Jack wrote:
> On 4/17/22 11:06, Jude DaShiell wrote:
> > ...
> > Most recent crash happened after opening links on the gentoo page its
tual work in removing and replacing heat sink and fan is not that great
> - but if it is not near definite that is the cause of your problem, then it
> might be a wasted effort.
>
> On 4/17/22 12:53, Jude DaShiell wrote:
> > Yes, I am blind and can disassemble computers okay but never
replace it if that much work is involved.
On Sun, 17 Apr 2022, Mark Knecht wrote:
> On Sun, Apr 17, 2022 at 8:14 AM Jude DaShiell wrote:
> >
> > Has the links browser crashed other computers when used with speakup? If
> > it turns out I'm not unique maybe a safer brows
Has the links browser crashed other computers when used with speakup? If
it turns out I'm not unique maybe a safer browser choice ought to go on
the next minimal iso.
I have had several system crashes trying a gentoo install.
These crashes involve the loss of speakup and no capability to resurrect
speakup either.
Further to that, when the system is shutdown it cannot be restarted
without use of the reset button additional to the power button.
When I take my
I was doing the emerge-webrsync step in the install instructions for
gentoo and that was to install a gentoo snapshot.
On Fri, 15 Apr 2022, Arve Barsnes wrote:
> On Fri, 15 Apr 2022 at 19:58, Jude DaShiell wrote:
>
> > Found no snapshots on rit.edu and went back from now to M
Found no snapshots on rit.edu and went back from now to March 6, 2022.
I'm using openrc now. Has gentoo got a site where it shows latest
available snapshot information for its snapshots?
Likely need to get a stage3 file that doesn't use systemd too. Another
user on the speakup list let me know they don't use systemd and don't run
into the trouble I've had.
On Fri, 15 Apr 2022, Dr Rainer Woitok wrote:
> Jude,
>
> On Friday, 2022-04-15 09:58:40 -0400, you wrote:
>
> > after the
after the LC_MESSAGES=C
line, caught signal 2 exiting gets printed in the file.
Could use of nokeymap boot parameter prevent this error?
Not only does speakup crash but the system once turned off cannot be
started up again without use of the reset button. This amd system has
about 14gb of ram and 8 cores on it. Something else that happens every so
often is that the fans run really fast and sometimes not during gentoo
I used cursor would tracking highlight work better?
On Fri, 15 Apr 2022, John Covici wrote:
> Are you using cursor or tracking hilight instead?
>
> On Thu, 14 Apr 2022 22:30:58 -0400,
> Jude DaShiell wrote:
> >
> > When speakup is used with mirrorselect mirro
When speakup is used with mirrorselect mirrorselect locks the cursor at
the bottom of the screen and doesn't allow moving the cursor onto repos in
the downloaded lists. I can find which repos are selected by inspecting
the screen with speakup for changed colors where if I only hit the
spacebar
. I know
a little bit about systemd.
On Thu, 14 Apr 2022, Laurence Perkins wrote:
>
> > -Original Message-
> > From: Dale
> > Sent: Thursday, April 14, 2022 8:29 AM
> > To: gentoo-user@lists.gentoo.org
> > Subject: Re: [gentoo-user] doing gentoo instal
I got down to emerge-webrsync and discovered an error in portage/make.conf
on line 21 non-existent server then emerge-webrsync tried to get a time
stamp and then speakup died.
I have a single ssd slot in this machine and may be able to attach the
gentoo ssd to the computer by usb so I can recover
install-amd64-minimal-20220403T220339Z.iso when gentoo-nofb got used for
kernel selection and speakup.synth=soft as boot parameter I got as far as
setting a root password then speakup crashed. The other thing I didn't
see that happened was two returns were needed to get speakup talking at
all
provided I think will help my next gentoo install go
better in the kernel build phase thanks.
On Wed, 6 Apr 2022, Jack wrote:
> On 2022.04.06 14:51, Jude DaShiell wrote:
> >I'm curious, with a system about to build a kernel does a command or
> >command switch exist to tell the kerne
I'm curious, with a system about to build a kernel does a command or
command switch exist to tell the kernel build process to build the kernel
in such a way that all hardware now enabled gets enabled in the build of
the kernel?
Move onto the newer version and keep the earlier version number handy so
if the newer version breaks especially in the same way you have a backout.
On Sat, 2 Oct 2021, John Covici wrote:
> Hi. I have discovered that www-client/chromium-95.0.4621.4 will not
> go to any internet webpage.
>
>
I have read over on the orca-list one way to get gnome 40.0 working on
fedora 34 workstations is to disable se-linux. Was se-linux installed and
enabled on gentoo? If so, disabling and/or removing se-linux may be your
key to accessibility.
On Fri, 7 May 2021, John Covici wrote:
> Hi. I just
Check the date and time when you boot and if it isn't correct, you
probably have a dead battery on your motherboard. I had to replace one a
couple days ago. Fortunately the kind of battery my computer uses is sold
in pharmacies since blood sugar meters also use them.
On Mon, 15 Feb 2021,
Python is every bit as much trouble in gentoo as it is in the Florida
swamps. Python is so much trouble the History Channel has a Swamp
People program they're showing regularly on TV.
Could the post-install section of the handbook do with some good
updates?
On Sat, 19 Dec 2020, Michael wrote:
I doubt goblins wrote any part of gentoo, from what Neil wrote me
earlier if memory serves the language is actually Portagese.
On Sat, 12 Dec 2020, Alan Mackenzie wrote:
> Date: Sat, 12 Dec 2020 09:22:40
> From: Alan Mackenzie
> Reply-To: gentoo-user@lists.gentoo.org
> To:
Does gentoo know about kickstart files and can it use them?
-- United States has 633 Billionaires with only 10 doing any annual
significant giving.
My advice is to keep tabs on python2.7 libraries and their conversion to
python 3 and when 100% of those libraries have been converted the old
scripts may be easier to convert using existing python tools. The sed
editor may get you part of the way through conversion but missing python
3 libraries
On Sun, 15 Nov 2020, Rich Freeman wrote:
> Date: Sun, 15 Nov 2020 09:32:37
> From: Rich Freeman
> Reply-To: gentoo-user@lists.gentoo.org
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] python2 really really really gone? Scripts all
> broken?
>
> On Sun, Nov 15, 2020 at 9:03
o: gentoo-user@lists.gentoo.org
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] gentoo handbook
>
> On Saturday, 14 November 2020 18:48:57 GMT Jude DaShiell wrote:
> > On 2020-11-14, Jude DaShiell wrote:
> > > On Sat, 14 Nov 2020, Grant Edwards wrote:
&g
On Sat, 14 Nov 2020, Grant Edwards wrote:
> Date: Sat, 14 Nov 2020 17:30:51
> From: Grant Edwards
> Reply-To: gentoo-user@lists.gentoo.org
> To: gentoo-user@lists.gentoo.org
> Subject: [gentoo-user] Re: gentoo handbook
>
> On 2020-11-14, Jude DaShiell wrote:
>
I found this out by means of documentation in the handbook pointing at it
but not being explicit about it.
# eselect profile show
during a new install is what you run to find what distribution your
distribution iso uses.
Also you will do best to select a matching profile for first time
This was even following the steps in that systemd gentoo wiki article.
I'm glad I tried it since if I hadn't I'd never know.
-- United States has 633 Billionaires with only 10 doing any annual
significant giving.
gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] systemd install attempt busybox and pam are
> fighting
>
> On Fri, 13 Nov 2020 17:40:43 -0500, Jude DaShiell wrote:
>
> > !!! The ebuild selected to satisfy "sys-apps/busybox" has unmet
> > requirements.
&
; To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] systemd install attempt busybox and pam are
> fighting
>
> On Fri, 13 Nov 2020 17:40:43 -0500, Jude DaShiell wrote:
>
> > !!! The ebuild selected to satisfy "sys-apps/busybox" has unmet
> > requi
gt; Subject: Re: [gentoo-user] systemd install attempt busybox and pam are
> fighting
>
> On Fri, 13 Nov 2020 17:40:43 -0500, Jude DaShiell wrote:
>
> > !!! The ebuild selected to satisfy "sys-apps/busybox" has unmet
> > requirements.
> > - sys-apps/busybox-1.
What can I do to clear this conflict?
Script started on 2020-11-13 17:35:37-05:00 [TERM="linux" TTY="/dev/tty1"
COLUMNS="128" LINES="48"]
livecd /etc # emerge -AabDN @world
These are the packages that would be merged, in order:
Calculating dependencies
!!! Problem resolving dependencies for
I did some portage configuration and the kernel configuration items that
are missing got saved in that log file!
-- United States has 633 Billionaires with only 10 doing any annual
significant giving.
About 6 different complaints about my kernel configuration that blew off
the screen as packages were being emerged. Does any way exist to have
emerge write these to a log file of some sort for later checking and
action?
-- United States has 633 Billionaires with only 10 doing any annual
ccess the rest of the data. MS
> Flight Sim did that with its multiple (7 CDs I believe) data worth of world
> scenery. Maybe that is what it is referring to.
>
>
> > On Nov 7, 2020, at 5:28 AM, Jude DaShiell wrote:
> >
> > Hi, I read the description already an
ate: Sat, 7 Nov 2020 10:17:08
> From: Neil Bothwick
> Reply-To: gentoo-user@lists.gentoo.org
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] use flag nocd
>
> On Sat, 7 Nov 2020 08:28:44 -0500, Jude DaShiell wrote:
>
> > Hi, I read the description alre
gt; nocd Install all files required to run the application without a CD mounted.
>
> Here is the whole list:
>
> https://gentoo.org/support/use-flags/ <https://gentoo.org/support/use-flags/>
>
> Cheers
>
>
> > On Nov 7, 2020, at 4:31 AM, Jude DaShiell wr
What does it enable and what does it disable?
--
United States has 633 Billionaires with only 10 doing any annual
significant giving.
>
> On Fri, 06 Nov 2020 10:25:11 -0500,
> Jude DaShiell wrote:
> >
> > It appears helpful in adding options to my .config file. However once
> > options are added, it's very difficult to enable espeak. So is my order
> > of operations in which kergen gets run first
It appears helpful in adding options to my .config file. However once
options are added, it's very difficult to enable espeak. So is my order
of operations in which kergen gets run first followed by make menuconfig
wrong? If so I can reverse and see if that works better. Another
possibility is
ki alsa article
>
> On Fri, 06 Nov 2020 07:21:40 -0500,
> Jude DaShiell wrote:
> >
> > Has anyone figured out how to get usb speakers playing after a boot into a
> > new gentoo system? If so, please update that alsa article in gentoo wiki.
> > With speakup.syn
Has anyone figured out how to get usb speakers playing after a boot into a
new gentoo system? If so, please update that alsa article in gentoo wiki.
With speakup.synth=soft as boot parameter usb speakers work fine but not
after boot into new gentoo install. If I do what I can, I can get the
That --user needs to be the last item on the command line when pip3 gets
run. I tried placing it earlier than that and pip3 didn't like that much
at all.
-- United States has 633 Billionaires with only 10 doing any annual
significant giving.
When I try:
pip3 install fenrir-screenreader
ERROR: (Gentoo) Please run pip with the --user option to avoid breaking
python-exec
Did not have this happen in earlier python and pip versions on other
systems.
What can I do to clear this error?
If it can't be cleared, I can install this package
020 07:07:26
> From: John Covici
> Reply-To: gentoo-user@lists.gentoo.org
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] gentoo install speechless
>
> On Thu, 22 Oct 2020 05:09:53 -0400,
> Jude DaShiell wrote:
> >
> > On Wed, 21 Oct 2020, John Covic
On Wed, 21 Oct 2020, John Covici wrote:
> Date: Wed, 21 Oct 2020 23:18:14
> From: John Covici
> Reply-To: gentoo-user@lists.gentoo.org
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] gentoo install speechless
>
> On Wed, 21 Oct 2020 13:08:51 -0400,
I got gentoo to boot and espeak although in the default run level with
speakup-soft=soft enabled in the kernel espeak is silent. I know the
system booted since I uncommented the TUNE line in grub and also added in
pcspkr into the kernel so was able to do a root login and then hit
backspace and
gt; On Sun, Oct 18, 2020 at 04:45:06PM -0400, Jude DaShiell wrote:
> > The ansifilter package won't build on this system yet. Certainly one to
> > get in future though.
>
> I'll see if I can send you a binary off-list. It's not a particularly
> complicated package, so I re
gt; On Sun, Oct 18, 2020 at 03:06:19PM -0400, Jude DaShiell wrote:
> > [01;31mlivecd[01;34m /etc/portage #[00m emerge --ask --verbose --update
> > --deep --newuse @world
>
> Please filter your script with `ansifilter` to remove ANSI colour control
> codes.
> O
1 - 100 of 151 matches
Mail list logo
