Information passed to my opt-in list already...
After over two months of work, I have succesfully ported
the Apache server, version 2.2.9, to our z/OS 1.9 system.
Based on this work, I have produced a paper on how to do
this (or at least how I did it, which may or may not work
for you). If you a
Check in the z/OS 1.9 migration guide under DFSMS migration actions. There is
a section in there that talks about defining linear data sets with CISIZE
greater than 4096.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of
O'Brien, David W. (NI
Thomas Berg wrote:
> ... [performance] consideration ... dcb for a SYSOUT dataset.
> ... I want to write multiple lines on sysout and they are of
> very different lengths, everything from zero to 3 chars.
> Does it matter if I use FB or VB and what [LRECL] i use ... ?
Yes, it could matter. B
IBM would like to know if anyone has created dependencies on the ordering of
subsystem initialization routines or depends on the subsystem initialization
process being synchronous.
We are specifically interested in the subsystem initialization routines that
are
run as part of defining the subs
Victor,
What the others have told is correct. However, one more thing to be aware
with STK drives is that there is an option to perform a "fast erase" and a
full or slow erase. The "fast erase" will only erase a couple of feet (not
sure how many) so that an attempt to read past the double-tape-mar
> -Original Message-
> Hi all,
> I have a T9840 tape drive and lots of carts that need to be
> erased the data on them. I know that there is an option in
> T9840 CSE panel that can be turned on/off:DSE(Data security
> erase), my question is: if I turned it on, what utility or
> software
As others have indicated, I (mostly) doubt that the READ (rather than READ
INTO) is doing ANY manipulation of data. The one possible exception is if
you have the 01-level under the FD defined as a numeric or edited field -
and even then, I doubt that conversion takes place. (The other exception is
All of our DB2 data bases are managed by SMS.
What is puzzeling is the DBAs are saying this worked fine in z/OS V1.7 but with
the installation of z/OS V1.9 it is failing. I am looking in IBM Link and not
finding anything that would support that view.
But I will try setting up the DC routine to
Hi ITsckak
We are DB2 only. We stop using IMS about 10 months ago
All numbers related to ECSA
Have fun
Doron
On Mon, Aug 25, 2008 at 10:16 PM, Itschak Mugzach <[EMAIL PROTECTED]>wrote:
> Doron,
>
> There is doubt that your CSA size in not 10M, there are only 16M down
> there... Did you use IRL
It should but the file must be SMS managed.
From: Lizette Koehler [mailto:[EMAIL PROTECTED]
Sent: Mon 8/25/2008 4:24 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Platinum and z/OS V1.9
Would that force Platinum to use more '*'?
Currently the dataclas for this data
Would that force Platinum to use more '*'?
Currently the dataclas for this data is (NULL).
Lizette
>Lizette,
>
> You might consider using a Data class that has the following attributes:
>
>Space Constraint Relief . . . : YES
> Reduce Space Up To (%) . . : 30
> Dynamic Volume Coun
I thought that I understood this option until a user came in.
Researching this issue, I discovered, what everyone else probably knows
but, Dynamic Vol addition doesn't occur if there's no secondary allocation
requested, eg SPACE=(TRK,(10,0)). This was obfuscated by Syncsort's
wannabee ICETOO
Lizette,
You might consider using a Data class that has the following attributes:
Space Constraint Relief . . . : YES
Reduce Space Up To (%) . . : 30
Dynamic Volume Count . . . : 9
Regards,
Dave O'Brien
From: Lizette Koehler [mailto:[EMAI
Cross posting to IBMMAIN and DB2 Newsgroups
Are there any issues with DB2 V8, Platinum and z/OS V1.9?
Our DBA group is indicating that since the z/OS V1.9 operating system went in,
the Platinum loads have failed on space issues.
What they are seeing are:
IGD17226I THERE IS AN INSUFFICIENT NU
I too found the System Data Set Definitions manual to be quite useful.
As Mark pointed out it went away with z/OS 1.7. You can get the last
version at
http://publibz.boulder.ibm.com/epubs/pdf/iea2g500.pdf
The info may be 'old', but I believe it is still mostly relevant.
Don Imbriale
-Origina
Jon,
will contact oflline. This version will be released in the next few weeks
before
z/OS R10 goes GA.
Roland
>Roland, how can I contact you to get the beta version of Showzos?
>Thanks,
>Jon
>
--
For IBM-MAIN subscribe / si
>Why don't you just zap the VTOC entry for this dataset to PS? The catalog
>structure is much simpler then and bypasses VVDS. You should be familiar
>with VTOP dump, zap and format-x DSCBs. Don't try it at home if you are
not
>familiar with it! If you have CA-Disk, you can use a utility to this for
Why don't you just zap the VTOC entry for this dataset to PS? The catalog
structure is much simpler then and bypasses VVDS. You should be familiar
with VTOP dump, zap and format-x DSCBs. Don't try it at home if you are not
familiar with it! If you have CA-Disk, you can use a utility to this for
you
Doron,
There is doubt that your CSA size in not 10M, there are only 16M down
there... Did you use IRLM for IMS as well? I mean, may be from DB2 point of
view IRLM uses only 10M in ECSA, and the rest 3MB are used by IMS settings
left behind after IMS drop? Start OM for DBCTL and see what it has to
Roland, how can I contact you to get the beta version of Showzos?
Thanks,
Jon
Jon L. Veilleux
[EMAIL PROTECTED]
(860) 636-2683
This e-mail may contain confidential or privileged information. If
you think you have received this e-mail in error, please advise the
sender by reply e-mail and then
>I've had good luck with IBM's unsupported VVDSFIX tool, to delete an
>otherwise un-delete-able data set. The VVDSFIX tool's DELBCSR command did
>the trick for me.
SHAZAM! It worked. Thanks!
Jeffrey Deaver, Engineer
Systems Engineering
[EMAIL PROTECTED]
651-665-4231(v)
IS - "Creating competit
Fransiscus
I was obliged to call on the services of Google in order to work out what you
were talking about here. Eventually FEPI and CICS as keywords cleared the
matter up.
You should probably use the CICS-L list for this query. See
http://www-01.ibm.com/software/htp/cics/communities/cics-l.
As promised, I now have a solution to my Syncsort Jobs abending with U1188.
EMC has a microcode patch for DMX2 (DMX3000 Storage array) family and DMX4
(DMX4500 Storage Array) family.
You can search powerlink with the following phrase: ‘IOS050I SyncSort ABEND
U1188’
You will see a couple for
On Mon, 25 Aug 2008 13:47:03 -0500, Mark Zelden <[EMAIL PROTECTED]>
wrote:
>On Mon, 25 Aug 2008 12:29:15 -0500, John C. Wolf <[EMAIL PROTECTED]> wrote:
>
>>There used to be an IBM manual about placement of system daya sets in MVS.
>>It also told what system data sets could be shared and not shared
My own preference would be to NOT share
LOGREC, MAN files, certain zFS or HFS files, Page Datasets, and so on.
I would share Copule Data Sets, Catalogs, Spool, and so on.
Lizette
>
>There used to be an IBM manual about placement of system daya sets in MVS.
>It also told what system data sets c
For some reason, "the powers that be" who are in charge of IBM manuals have
decided that the old System Data Set Definition manual is no longer needed. I
found the following reference which explains that the LOGREC data set must
be unique to each z/OS system, from z/OS Diagnosis Tools and Servi
On Mon, 25 Aug 2008 12:29:15 -0500, John C. Wolf <[EMAIL PROTECTED]> wrote:
>There used to be an IBM manual about placement of system daya sets in MVS.
>It also told what system data sets could be shared and not shared.
>Does any one knoe what that manual is now or where I can find such
>informati
There used to be an IBM manual about placement of system daya sets in MVS.
It also told what system data sets could be shared and not shared.
Does any one knoe what that manual is now or where I can find such
information?
We just installed z/OS 1.9 and are sharing the logrec data set between thre
Dear All,
Our shop has never used FEPI before, but since the bussiness need grew, we are
currently exploring that option.
Any experience in using FEPI is very much needed.
We really need an expert on guiding us towards the right way on how to
implement this.
So we are going to have a CICS P
In article <[EMAIL PROTECTED]> you write:
>Hi all,
>I have a T9840 tape drive and lots of carts that need to be erased the data
>on them. I know that there is an option in T9840 CSE panel that can be
>turned on/off:DSE(Data security erase), my question is: if I turned it on,
>what utility or softwa
Doubt the Read is involved. Look at the move code for this field
generated by the complier. Pics?
On Mon, 25 Aug 2008 08:26:19 -0600, Steve Comstock wrote:
>K Zafirop wrote:
>>
>The value
>> passed is the arithmetic truncation of the string. For example a
>> string 'FOW123' is passed with value
I've had good luck with IBM's unsupported VVDSFIX tool, to delete an
otherwise un-delete-able data set. The VVDSFIX tool's DELBCSR command did
the trick for me.
//*DELBCSR - DELETE BCS RECORD will erase a BCS record.**
//* The purpose of this command is to erase a catalog
In a message dated 8/25/2008 7:00:29 A.M. Central Daylight Time,
[EMAIL PROTECTED] writes:
>I do find it distressing that experienced people on this forum would give
advice about using non-programming interfaces such as CVTSRBRT.
I didn't know until your post that using CVTSRBRT was not t
I thought that maybe today JES2 stores it in its own,
compressed, format regardless of what I specify.
The natural choice if thinking in terms of normal dataset
IO would of course be VB as You suggest.
The 3 chars was just an example to show the
unpredictability of the output.
(Logging, de
On Mon, 25 Aug 2008 08:26:19 -0600, Steve Comstock wrote:
>K Zafirop wrote:
>>
>The value
>> passed is the arithmetic truncation of the string. For example a
>> string 'FOW123' is passed with value '666123'.
>
>I'm confused here. How can the string 'FOW123' have a value '666123'?
>The string is it
I wondering if there are some preformance consideration regarding dcb
parms for a SYSOUT dataset. Lets say that I want to write multiple lines
on sysout and they are of very different lengths, everything from zero
to 3 chars.
Do
>4. For this one you need to leave the ver… as is.
>
>//SYSINDD *
> ZAP BCS(USERCAT.NAME) -
> DELETE(KEY(DATASET.NAME) -
> VER(04,C'A'))
>
Well, I'd love to try the zap, but I don't have CatalogRecovery +. Bum
We need to set up some type of area that our users (user's) can each place
their files but that can't be accessed by the other outside users.
You may want to look at access ACLs in the OMVS directory. Also the
<[EMAIL PROTECTED]> list may be more informative.
Jack Kelly
202-502-2390 (Office)
Hi!
I wondering if there are some preformance consideration regarding dcb
parms for a SYSOUT dataset. Lets say that I want to write multiple lines
on sysout and they are of very different lengths, everything from zero
to 3 chars.
Does it matter if I use FB or VB and what maxlength i use (LRE
> -Original Message-
> From: IBM Mainframe Discussion List
> [mailto:[EMAIL PROTECTED] On Behalf Of K Zafirop
> Sent: Monday, August 25, 2008 9:02 AM
> To: IBM-MAIN@BAMA.UA.EDU
> Subject: Enterprise COBOL v3.4.1 run time issue
>
> Hi all,
>
> One of our most curious programmers noticed t
On Mon, 25 Aug 2008 09:02:26 -0500 K Zafirop <[EMAIL PROTECTED]>
wrote:
:>Hi all,
:>
:>One of our most curious programmers noticed that when he uses READ or READ
:>INTO statement to parse alphanumeric data, a translation is made. The value
:>passed is the arithmetic truncation of the string. For
DTR will test and give you a Compile time error if truncation is
occurring, that is moving a 6 digit field to a 5 digit field. It will
also test to see when you are moving an alphanumeric field to a numeric
field. This is a compile time and not a runtime option. The value I am
seeing FOW123, if
K Zafirop wrote:
Hi all,
One of our most curious programmers noticed that when he uses READ or READ
INTO statement to parse alphanumeric data, a translation is made.
I don't believe it. READ transfers bytes of data from an
external source into a memory location unchanged. The only
exception
On Mon, 2008-08-25 at 08:32 -0500, Walt Farrell wrote:
> I think the basics are covered, Lindy, if you carefully read -all- of the
> MVS Programming Assembler Services Guide and the MVS Programming Authorized
> Assembler Services Guide. And the Extended Addressability Gyide. And a
> good reading
Hi all,
One of our most curious programmers noticed that when he uses READ or READ
INTO statement to parse alphanumeric data, a translation is made. The value
passed is the arithmetic truncation of the string. For example a
string 'FOW123' is passed with value '666123'. As you can see X'F1' =
John,
The commands entered in JCL have a space after the "//". It should be a
continuation card or one of the few SET, INCLUDE,.. cards that doesn't need
a "name" verb after the slashs. It should be simple to check of ot one of
these cards, continuation card or a suspected command.
In regard to th
On Mon, 25 Aug 2008 15:39:20 +0300, Binyamin Dissen
<[EMAIL PROTECTED]> wrote:
>On Mon, 25 Aug 2008 01:59:20 -0500 Volkmar Langer <[EMAIL PROTECTED]>
>wrote:
>
>:>Hi folks,
>:>I wonder if there's a way to find out which datasets are allocated to
master jcl
>:>(some control block or something like
Chris
All I meant by this phrase was that some user input would cause a program to
be executed in the CICS / IMS region. It could be what you described in your
post or something else though I can't comment due to my ignorance of these
matters. Rest of my post was the specific bit that I could c
On Sun, 24 Aug 2008 20:08:26 +0200, Lindy Mayfield
<[EMAIL PROTECTED]> wrote:
>That's exactly what I want to do. Problem is that there are some basic
>concepts that aren't covered so even though I've read those chapters a
>few times over, I don't get out of them what I should.
I think the basics
Peter Relson wrote:
It was mentioned that the desire is to do VSMLIST. Why? What will you do
with the information? Maybe there are other pieces of information available
in the system without going through the trouble (and cycles) of retrieving
VSMLIST and analyzing the conl structures.
Lindy st
DELETE 'dataset name' nvr FILE(DD1)
DD1 points to the correct UCAT
HTH,
So just to try renaming it to something... Seems like everything I try
really wants the physical file there - which doesn't make sense since
I've
run into rouge catalog entries before and not had trouble cleaning them
up
On Mon, 25 Aug 2008 01:59:20 -0500 Volkmar Langer <[EMAIL PROTECTED]>
wrote:
:>Hi folks,
:>I wonder if there's a way to find out which datasets are allocated to master
jcl
:>(some control block or something like that).
Depends on what you mean by "allocated".
You can look for SYSDSN ENQ's, for
On Sun, 17 Aug 2008 09:04:35 -0500, Chase, John wrote:
>Hi, All,
>
>Running a "smoke test" of z/OS 1.9 on the Prod LPAR, and getting
>intermittent S0F8-04 abends in TN3270. No hits on IBMLink for this.
>
>"System Codes" manual says:
>
>"The issuer [of an SVC instruction] was in a mode other than
I never saw the initial post, but the program provided as an example with
the BR 14 was incorrect. It was off by a level of indirection.
This was what was posted:
MODESET KEY=ZERO,MODE=SUP
STORAGE OBTAIN,LENGTH=2,SP=227
LR R5,R1
MVC 0(2,R5),=X'07FE'
IEAMSCHD EPADDR=(R5),ENV=STOKEN,TAR
Victor Zhang wrote:
Hi all,
I have a T9840 tape drive and lots of carts that need to be erased the data
on them. I know that there is an option in T9840 CSE panel that can be
turned on/off:DSE(Data security erase), my question is: if I turned it on,
what utility or software can I use to erase the
Hi all,
I have a T9840 tape drive and lots of carts that need to be erased the data
on them. I know that there is an option in T9840 CSE panel that can be
turned on/off:DSE(Data security erase), my question is: if I turned it on,
what utility or software can I use to erase the data on those cartrid
Volkmar Langer wrote:
I wonder if there's a way to find out which datasets are allocated to master jcl
(some control block or something like that).
The official ones are in the master scheduler TIOT. In some
versions of OS that TIOT is also used in the top level TCB
(region control task) in y
57 matches
Mail list logo