For the newer LE enabled PL/I compilers, the GENMOD command should look
like this:
GENMOD (FROM CEESTART
The FROM PLISTART applied to the older OS PL/I V2.3 product.
DJ
George Haddad wrote:
It's been MANY moons since I was a PL/I programmer, but in my day
it was necessary to use
I think I should know this one, but my mind has been filled up with
DB2/UDB and Oracle manuals.
But, we have DB2 for VM and VSE 7.3 running with PC based applications
(using the DRDA interface).
We just had an occurrance where the developer ran a query from hell,
then thought that's not right
Hello John,
Was there a reason to use CPLOAD32 or CPLOAD64 instead of
CPLOAD?
Performance, size, ... just nosey.
Ed Martin
Aultman Health Foundation
330-588-4723
[EMAIL PROTECTED]
ext. 40441
I was under the impression that CPLOAD was merely a bootstrap for
the other 2. Since our processor does not support CPLOAD64, I genned
only the CPLOAD32 Module with our local mods to save disk
space, and pointed directly to it with SAIPL.
Hello John,
Was there a reason to use CPLOAD32 or
CPLOAD at z/VM 4.4 is 2648 blocks, CPLOAD64 1339, and CPLOAD32 1310. Since
I couldn't run CPLOAD64 either, I threw it and CPLOAD away and ran with
CPLOAD32 as CPLOAD. I didn't see any sense in loading it all even if it
was or might have been pageable.
Jim
At 03:29 PM 4/19/2006, you wrote:
Is the user authorized to connect to the Vswitch?
Craig Dudley wrote:
Hi,
I have a question about where I find the meaning of a failure
code of F6 for message DTCOSD066E when I try to start a device
in my TCPIP stack that is attached to a persistent VSWITCH
defined as ETHERNET VLAN UNAWARE.
Rich,
Is the user authorized to connect to the Vswitch?
Yes, I GRANTed the user (TCPIP) access to the vswitch.
--
Craig
Craig Dudley wrote:
Hi,
I have a question about where I find the meaning of a failure
code of F6 for message DTCOSD066E when I try to start a device
in my TCPIP stack that
Before our datacenter move last summer, our backup machine was an LPAR on a
32-bit machine. Now, the main VM system and backup LPAR are housed on different
z990s. We had a need for the module with the schizoid personalities until then.
Now, we do not.
Regards,
Richard Schuh
-Original
I'd be inclined to do what the following update to the message at the
z/VM 5.1 level suggests:
| System Programmer Response: Ensure the
configuration of the device is
| correct. If the problem persists, report the problem to the IBM Support
| center.
I would guess that TCP/IP is just passing
I was under the impression that CPLOAD was merely a bootstrap for
the other 2. Since our processor does not support CPLOAD64, I genned
only the CPLOAD32 Module with our local mods to save disk
space, and pointed directly to it with SAIPL.
Hello John,
Was there a reason to use CPLOAD32 or
On Wednesday, 04/19/2006 at 03:37 AST, Craig Dudley
[EMAIL PROTECTED] wrote:
Hi,
I have a question about where I find the meaning of a failure
code of F6 for message DTCOSD066E when I try to start a device
in my TCPIP stack that is attached to a persistent VSWITCH
defined as ETHERNET VLAN
Martha,
You were planning a longer test over the Easter weekend. How did it go?
Hi MP3000 Gurus,
I need some help how to migrate from an OSA-2 using
Token-Ring adapter from an IBM 9672-RB5 to a MP3000 H50 with TKR card.
Today I use XCA VTAM book to see OSA
TKR. I was checking MP3000 manual and found no useful information about how to
configure EMIO and MPTS
I am going to switch from an older VSE guest to a newer one. I have a num
ber
of users, however, who have the DIAL VSEOLD command in their 3270 start
up
scripts (or at least in their heads or postit notes). Instead of going to
each user and adjusting their scripts so they will be dialing the new
The second quarter meeting of the Chicago Area VM (and Linux)
Enthusiasts will be held on Thursday, April 27, 2006.
The Final Agenda is included below.
--
Meeting Location:
This quarter's meeting will be held at the Hewitt Associates 'East
Campus' located at 100 Half Day Road, in
15 matches
Mail list logo
