On Tuesday, 08/29/2006 at 10:16 EST, =?iso-8859-1?Q?Larry_Macioce?=
[EMAIL PROTECTED] wrote:
Now here is where I run into trouble.
I can't putty into the new (or old..as expected) session
I can't ping the new addr(pri)
I can't ping the new gw(pri)
I can ping myself(I think that's becasue it
well, you could create a disconnected vswitch for the .5 network, or
just a guest lan. The disconnected vswitch (when you define the vswitch
don't code any RDEVs) has the advantage that virtual machine membership,
and vlan membership should you go that route, is RACF protected. I think
with
I have notice something..on the guests that work I have this entry:
link-local * 255.255.0.0 U 0 00
eth0
in the route table,but on the dynamic route table it isn't there.
mace
At 01:44 PM 8/29/2006, you wrote:
On Tuesday, 08/29/2006 at 01:21 AST, Mary Elwood
[EMAIL PROTECTED] wrote:
As a newbie, I hope you'll take the opportunity to attend the System z9
and zSeries Expo in October in Orlando. Go to
http://www.vm.ibm.com/events and click on the link for the Expo.
Tom,
Why do you think the mainframe doesn't talk to the 3494 ... it does
via DFSMS.
JR
JR (Steven) Imler
CA
Senior Software Engineer
Tel: +1 703 708 3479
Fax: +1 703 708 3267
[EMAIL PROTECTED]
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf
If we buy another tape controller for the 3494 with FCP attachment and
we would have to buy additional tape drives (as the drives are
dedicated
to a controller), could we share the robotic 3494? I don't think we
can
share the VTS, but that's ok.
Is that doable? Has anyone tried and
We are looking at installing a 3484 library and VTS to replace a bunch
of conventional 3490's and 3590's. My understanding is that the VTS
tapes and tape drives cannot be used by anything except the VTS. A set
of FICON cables connects to the VTS controller to support communications
with the
To throw another wrinkle into this
The IBM VTS is supported by zSeries as well, as Win/NT, Win/2000, AIX,
Sun Solaris, HP-UX. I'm printing off the manuals now to see if the
unit will support these environments, shared, at the same time. That
would be a great solution.
AND
There are new
We do this. But not with a 3494. We have a 3584. A fraken-monster! It is
truly bleeding edge and we have the scars to prove it. In our shop,
this thing has four parts. There is a VTS for the z/OS system, FICON
connected. There is a VTL (Virtual Tape Library) for the distributed
systems, Fibre
For some REAL fun, try LEXX. Great if you are writing a REXX exec using
the RX$$ parser.
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Macioce, Larry
Sent: August 28, 2006 13:21
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: PUR RDR ALL not
We have been looking at an IBM VTS with the IBM 3494 robotics unit as a
backup solution for the mainframe side (z/VM 5.1, VSE/ESA 2.7, VSE/ESA
2.3, zLinux (Suse 9)).
Just been having a hard time comming up with the money to pay for it.
The network side, is now, also asking for a robotic unit.
Not strictly VM related, but my VM consoles are down (in fact all consoles
are down) because someone pulled the network cable from the ICC's. Now that
the cable is plugged back in, and the ICC's can be PING'ed, and all of the
devices are now enabled, I cannot connect to the ICC using PC3270 nor
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of Judson West
Sent: Tuesday, August 29, 2006 3:14 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: ICC Problems
Not strictly VM related, but my VM consoles are down (in fact
all consoles
are
Title: RE: ICC Problems
I haven't done it for some time, but I remember down in the HMC pannels where the ICC gets configured there is a 'reload, or restart' or something like that. You might try looking in the ICC Red Book.
-Original Message-
From: The IBM z/VM Operating System
On the HMC under Card Specific Advanced Facilities choose display active
sessions. Are there any sessions active? Try a PING from the HMC to see
if you can get out of the OSA.
- Original Message -
From: Judson West [EMAIL PROTECTED]
To: IBMVM@LISTSERV.UARK.EDU
Sent: Tuesday, August
Title: RE: ICC Problems
To reset
or reload the ICC, you have to vary off the CHPIDs to the ICC
from ALL LPARs. We were not doing this since the holdout LPAR was a new
one and since there was no console for it, it was just ignored. Taking the
CHPIDs offline at the HMC is not effective. Once
On Tuesday, 08/29/2006 at 02:47 MST, Judson West
[EMAIL PROTECTED] wrote:
To ?reset? or ?reload? the ICC, you have to vary off the CHPIDs to the
ICC from
ALL LPAR?s. We were not doing this since the holdout LPAR was a new one
and
since there was no console for it, it was just ignored.
Hello.
I found a many year old post which stated that a "flavor" of APL\360 or later version of APL sourcecould possibly be found onone of the manyVM user groups around.
Anyone know where i might find source code?
18 matches
Mail list logo
