I don't have a z10, but on my z890 I seem to remember
that I needed to set dynamic on somewhere on the HMC.
Possibly in the activation profiles? It's been a while...
Shimon
On Wed, Feb 16, 2011 at 4:07 PM, James Poirier wrote:
> To enable DYNAMIC I/O CONFIGURATION on z10 ru
You need check "Allow dynamic i/o changes on LPAR you wish on HMC..
i set it too on my SYSTEM CONFIG on lpar that you choose to be dynamic
changes..
0368 Features ,
0372 Dynamic_IO ,/* configuration for dinamic I/I
*/
On Wed, Feb 16, 2011 at 12:07 PM,
To enable DYNAMIC I/O CONFIGURATION on z10 running zvm 5.4
am I correct in doing the following or is something else needed:
1) gen the IOCP with the following ---> IOCP MYIOCP (DYN WRTA0
2) Perform a POR and ipl
3) When z/vm is up SET DYNAMIC ON
Thanks in advance for your h
On Wed, Jun 16, 2010 at 9:06 AM, Frank M. Ramaekers
wrote:
> q 5abf
> HCPQDV040E Device 5ABF does not exist
> Ready(00040); T=0.01/0.01 08:01:35
CP Query rDEV fails because CP never saw light; it never created an
RDEV, SUBCHANNEL, or PATH.
Cheers
--
Gregg Reed
"No Plan, survives execution"
BB UNITADD 00 CUNUMBR 0111"
HCPCCO6806E Dynamic I/O change request for device failed with return
code 010A
+++ RC(6806) +++
4 *-* "CP DELete DEVice 5ABF UNITADD FE CUNUMBR 0111"
>L> "CP DELete DEVice 5ABF UNITADD FE CUNUMBR 0111"
Device configuratio
: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Gregg
Sent: Wednesday, June 16, 2010 2:24 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Dynamic I/O question
"CP DELete DEVice 5AB0-5ABB UNITADD 00 CUNUMBR 0111"
need mo coffee..
On Wed, Jun 16, 2010 at 3:22 A
M. Ramaekers
wrote:
> CP DELete CU 0111
>
> HCPCCO6806E Dynamic I/O change request for control unit failed with
> return code 010B
> Ready(06806); T=0.01/0.01 07:18:33
>
>
> Hmmmdon't think I'm getting any further...but thanks for your
> helpguess I'll hav
Mine does, p334 v5.4
CUNUMBR should be 0!!!
On Wed, Jun 16, 2010 at 8:14 AM, Frank M. Ramaekers
wrote:
> CP DELete DEVice 5AB0-5ABB UNITADD 00 CUNUMBR
> 011
>
> HCPCCO6806E Dynamic I/O change request for device failed with return code
> 010E
>
> Ready(06806); T
CP DELete CU 0111
HCPCCO6806E Dynamic I/O change request for control unit failed with
return code 010B
Ready(06806); T=0.01/0.01 07:18:33
Hmmmdon't think I'm getting any further...but thanks for your
helpguess I'll have to ask IBM.
Thanks,
Frank M. Ramaekers Jr.
CP DELete DEVice 5AB0-5ABB UNITADD 00 CUNUMBR 011
HCPCCO6806E Dynamic I/O change request for device failed with return
code 010E
Ready(06806); T=0.01/0.03 07:13:13
...and my doc's don't have a 010E (010D and 010F, but no 010E).
Frank M. Ra
ok, now I've had almost enough coffee
> "CP DELete DEVice 5AB0-5ABB UNITADD 00 CUNUMBR 0111"
"CP DELete DEVice 5ABF UNITADD FE CUNUMBR 0111"
> "CP DELete CU 0111"
> "CP DELete CHPID 11"
--
Gregg Reed
"No Plan, survives execution"
"CP DELete DEVice 5AB0-5ABB UNITADD 00 CUNUMBR 0111"
need mo coffee..
On Wed, Jun 16, 2010 at 3:22 AM, Gregg wrote:
>
>
>>On Tue, Jun 15, 2010 at 2:08 PM, Frank M. Ramaekers
>> wrote:
>>What am I missing?
>
> Return code 10B on the CP DELete CU indicates there are "one or more I/O
> devices defi
>On Tue, Jun 15, 2010 at 2:08 PM, Frank M. Ramaekers
>wrote:
>What am I missing?
Return code 10B on the CP DELete CU indicates there are "one or more I/O
devices defined to it"
"CP DELete DEVice 5AB0-5ABB UNITADD 00 CUNUMBR 011"
"CP DELete CU 0111"
"CP DELete CHPID 11"
All the above may need to
HCPCPS040E Device 5ABF does not exist
16 device(s) specified; 0 device(s) successfully varied
subchannel offline
Then, the same result:
cp delete cu 0111
HCPCCO6806E Dynamic I/O change request for control unit failed with
Sorry jumped to conclusion.
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Frank M. Ramaekers
Sent: Tuesday, June 15, 2010 4:06 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Dynamic I/O question
Oh, I know I can...I've made some changes rec
ation
dynamically.
You can use this command to issue a group of dynamic I/O commands
together.
Otherwise, each command enters and exits configuration mode at the
beginning
and ending of each dynamic I/O command.
Frank M. Ramaekers Jr.
From: The IBM
VARY OFF SUBCHANNEL 5AB0-5ABF
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Frank M. Ramaekers
Sent: Tuesday, June 15, 2010 2:09 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Dynamic I/O question
Okay, the person that put together our IOCP made an
Try SET CONFIGMODE ON and see if you can do Dynamic configuration
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Frank M. Ramaekers
Sent: Tuesday, June 15, 2010 2:09 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Dynamic I/O question
Okay, the person
I tried deleting the CHPID, but I get:
cp delete chpid 11
HCPCCO6806E Dynamic I/O change request for channel path failed with
return code 010B
Ready(06806); T=0.01/0.01 13:06:33
Okay, this states "You tried to delete a channel path, but this channel
path still has one or more co
tasks) but this is the simple and straightforward way that I can
remember...
Mike Hammock
- Original Message -
From: "Frankovich, Bob"
To:
Sent: Tuesday, August 11, 2009 9:10 AM
Subject: Re: IOCP, Dynamic I/O and Tokens
I got an hour this morning so I came in at 5:00 to perform t
I got an hour this morning so I came in at 5:00 to perform the POR on our
z9. The original IOCP change was to change an OSA port from Non-QDIO to
QDIO but I also added "MAXDEV=(CSS(0),500,0)" to the RESOURCE.
After the POR, I tried to do an ACTIVATE and received a message about
insufficient C
ursday, August 06, 2009 1:23 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: IOCP, Dynamic I/O and Tokens
I received the same message, but the next line said : Processing will
continue with default token. I looked in the CMS member that
contained
my IOCP Source and a Token had been inserted.
I received the same message, but the next line said : Processing will
continue with default token. I looked in the CMS member that containe
d
my IOCP Source and a Token had been inserted. Since I didn't know what t
o
change it to, I left it as is. Unfortunately, I haven't had the
opportun
I'm about to POR a new IOCP to support Dynamic I/O.
I added to IOCP on the RESOURCE statement:
MAXDEV=(MAX)
Performed a "Disable write protect" and wrote (WRTA1) the IOCP with the
DYN operand. The output from the IOCP command stated:
QUERY TOKEN command return
M
Please respond to
"The IBM z/VM Operating System"
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: Dynamic i/o
One of the z/OS systems on our processor owns the
IODF TOKEN and we have
been able to add devices that have been defined on the z/OS side. Our
SYSTEM CONF
One of the z/OS systems on our processor owns the IODF TOKEN and we have
been able to add devices that have been defined on the z/OS side. Our
SYSTEM CONFIG does not have anything in it that Rick mentioned and it
has been 2-3 years now since the devices were added. I suspect that on
the VM si
There is one key statement in the Features section of SYSTEM CONFIG. It
could be either in the Enable or Disable section and that will determine
how your system behaves.
"NEW_DEVices_Initialized_When_added" tell CP whether to accept the MCH
interrupts when the configuration gets changed.
You can
z/OS team has decided they want to dynamically define something to on of
our lpars. We don't have any of the Features statements in system
config for anything dynamic. Will we recognize these devices they add?
Thanks in advance.
Marcy Cortes
"This message may contain confidential and/or privi
28 matches
Mail list logo
