On Thursday, 12/10/2009 at 03:17 EST, Ron Schmiedge
wrote:
> We don't have MAXDEV set coded in our IOCP for our z800, and dynamic
> configuration is enabled and does work (I have used it once or twice).
The default value for MAXDEV is described in the IOCP book. Coding
MAXDEV=(MAX) is not re
1-6649
>
> 1200 Wooded Acres Dr.
>
> Fax: (254)741-5777
>
> Waco, Texas 76701
>
>
>
>
>
>
>
>
> --
>
> *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On
> Behalf Of *Kris Buelens
> *Sent:* Thursday, Decemb
.EDU
Subject: Re: SET CONFIGMODE ON fails
I think I've got the SE settings OK, but I'm afraid I miss Allan's item
2. IOCDS must have expansion room (MAXDEV in IODF)
But, I don't have an IODF, just an IOCP (can't check this from home)..
Anyhow, I've got quite som
I think I've got the SE settings OK, but I'm afraid I miss Allan's item
2. IOCDS must have expansion room (MAXDEV in IODF)
But, I don't have an IODF, just an IOCP (can't check this from home)..
Anyhow, I've got quite some items to verify on my next visit. Thanks to
all.
2009/12/10 Gregg
> S
See Page 5-14 of the z800 SE manual at resource link
*
*
If a power-on reset of the CPC initially enables dynamic I/O configuration,
a task becomes available on the support element workplace for changing the
CPC’s dynamic I/O setting without performing another power-on reset. To
change the CPC’s dy
I didn't read this close enough earlier:
set configmode on
HCPCCO6808E System disabled for dynamic I/O changes
HCPCCO6808E The dynamic I/O support was disabled at the
HCPCCO6808E service console
Ready(06808); T=0.01/0.01 17:15:54
There is definitely something that needs to be done at the SE/HMC...
On Thursday, 12/10/2009 at 07:45 EST, Gregg wrote:
> Perhaps, there wasn't enough memory to carve out HSA; for grins try CP Q
HSA.
> If there's none, and I would think you'd have gotten an
error/informational
> message during the POR/CEC Activate, but if none, you'll need to reduce
what's
>
;> > What does the TOK statement in the IOCP look like? I seem to recall
>>> > having to fiddle with that to get dynamic part working. Its been a
>>> > couple of years but I will see if I can find my notes.
>>> >
>>> > Ron
>>> >
>>&g
en a
>> > couple of years but I will see if I can find my notes.
>> >
>> > Ron
>> >
>> > On Tue, Dec 8, 2009 at 10:05 AM, Kris Buelens
>> wrote:
>> >> I'm working on an old z800 machine for backup Recovery, that is running
>> in
ing to fiddle with that to get dynamic part working. Its been a
> > couple of years but I will see if I can find my notes.
> >
> > Ron
> >
> > On Tue, Dec 8, 2009 at 10:05 AM, Kris Buelens
> wrote:
> >> I'm working on an old z800 machine for backup
e, Dec 8, 2009 at 10:05 AM, Kris Buelens wrote:
>> I'm working on an old z800 machine for backup Recovery, that is running in
>> basic mode (no LPARs). And SET CONFIGMODE ON fails:
>> set configmode on
>> HCPCCO6816E Dynamic I/O changes are not allowed on this system
>&
ect this profile for activation, you have to
perform another power-on-reset.
Aria
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Kris Buelens
Sent: Tuesday, December 08, 2009 11:05 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: SET CONFIGMODE ON fails
I'm working o
Buelens wrote:
> I'm working on an old z800 machine for backup Recovery, that is running in
> basic mode (no LPARs). And SET CONFIGMODE ON fails:
> set configmode on
> HCPCCO6816E Dynamic I/O changes are not allowed on this system
> Ready(06816); T=0.01/0.01 16:12:18
>
> On t
;
>> On Tue, Dec 8, 2009 at 11:05 AM, Kris Buelens
>> wrote:
>>>
>>> I'm working on an old z800 machine for backup Recovery, that is running
>>> in basic mode (no LPARs). And SET CONFIGMODE ON fails:
>>> set configmode on
>>> HCPCCO681
r backup Recovery, that is running in
>> basic mode (no LPARs). And SET CONFIGMODE ON fails:
>> set configmode on
>> HCPCCO6816E Dynamic I/O changes are not allowed on this system
>> Ready(06816); T=0.01/0.01 16:12:18
>>
>> On the HMC, I turned on "allow
for the POR/CEC Activate was the IOCP in the current slot DYN?
On Tue, Dec 8, 2009 at 11:05 AM, Kris Buelens wrote:
> I'm working on an old z800 machine for backup Recovery, that is running in
> basic mode (no LPARs). And SET CONFIGMODE ON fails:
> set configmode on
> HCPCCO
I'm working on an old z800 machine for backup Recovery, that is running in
basic mode (no LPARs). And SET CONFIGMODE ON fails:
set configmode on
HCPCCO6816E Dynamic I/O changes are not allowed on this system
Ready(06816); T=0.01/0.01 16:12:18
On the HMC, I turned on "allow d
17 matches
Mail list logo
