--- Jose Luis Abuelo Sebio <[EMAIL PROTECTED]>
escribió: > De: Jose Luis Abuelo Sebio
<[EMAIL PROTECTED]>
> Para: PreguntasVLAN <[EMAIL PROTECTED]>
> Asunto: [VLAN] Question about Linux Router Project -
> LRP Bering
> Fecha: Mon, 30 Dec 2002 00:50:02 +0100 (CET)
hey, can any of you tell me how I can make a bridge
between two interfaces in a computer with LRP?, I need
the two interfaces with two IP address. I'll apreciate
if any of you can give me the solution or if you know
any document to read. thanks
___
Y
hey, an easy question:
I'm new using the LRP, and I'm trying to install a
package called vlan.lrp. I'm following all the
instructions that I've read in the manual "Leaf Bering
instalation guide": I've copied the package in the
floppy disk and then I've edited the syslinux.cfg and
I've added the n
Hello everyone:
I'm trying to install the package BRIDGE.LRP, I've
copied it in the floppy disk and I've edited and
modified the syslinux.cfg file. Then I've used the
lrpkg -i comand to install the package but I want to
work with it and I can't. Do any of you guys know why?
Did I do anything wro
Hy guys, let see if any of you can help me with this
problem.
I'm trying to add a workstation to a VLAN, so I have
readed the guides and I
1) Did a patch to the kernel to be able to use
8021q
2) recompiled and installed the new kernel
So now I should be able to add this workstation with
Hi guys:
I'm trying to enable the vlan software in a linux
machine. There is a module called 8021q.o which I
already installed with the comand
insmod 8021q
but the problem is when I reboot the system all the
configuration I did about vlan in the machine is gone
because it does not load the mod
Huy guys:
I'm using a bering distribution to set up a vlan. I
am using the bering distribution in two computers
which has supposed to work as bridges. Both
computers(bridges) have three interfaces wich are
under the same bridge call "Ourense",
Bridge Ourense eth0
eth1
Hi guys:
Here is the situation, I have two computers running
with a bering distribution and working as bridges to
set up a virtual lan. They are fisically connected by
a cable and they work perfectly.
The question is that I want to know how to set them
up if the computers working as bridges, a
Hi guys:
Here is the situation, I have two computers running
with a bering distribution and working as bridges to
set up a virtual lan. They are fisically connected
by
a cable and they work perfectly.
The question is that I want to know how to set them
up if the computers working a
Hi, Let's see if somebody can help me with this. I've
a computer running with a bering distribution and I
would like to work with an ATM card too.
Do you know if I can use ATM in bering? How? Do I
need any package or module? How can I configure it? Do
you know any guide for that?
Thanks and I h
Hi guys:
I am trying to set up a project in the labs of my
university working with a Bering distribution, and I
would like to provide ATM to my project. This is the
situation:
I have to bridges running under Bering which are
connecting a VLAN. The problem is that I have the
bridges located in dif
Hi everyone:
Here I am trying to create a package for the LRP
distribution Bering, which I am using. As I have
readed at the Developer´s guide the steps I have to
follow to create my package is adding the package and
a group of files :
pkgname.list List of files contained in the
pac
Hi everyone!
As I was told in this mailing list, I have
downloaded the module idt77105.o to install with other
module nicstar.o to get my atm nic ForeRunnerLE 25Mbps
work under bering.
I went to
http://leaf.sf.net/devel/jnilo/bering/latest/modules/2.4.20/modules.dep
to check the module depen
Juin 2003 13:30, Jose Luis
Abuelo
> Sebio a écrit :
> > Hi everyone!
> >
> > As I was told in this mailing list, I have
> > downloaded the module idt77105.o to install with
> other
> > module nicstar.o to get my atm nic ForeRunnerLE
> 25Mbps
> > work und
Hi Guys:
Let´s see if someone know what to do with this:
I am trying to enable a atm nic to use a package
called atmtools.lrp.
To get this, I am using a nicstar.o module which
depends of another module "idt77105.o".
I was trying to do this in different bering
distributions V1.2, V1.1 and v1.
For these packages I had
to install two modules 8021q.o for vlan.lrp and
bridge.o, Do I have to install any
extra module for atmtools.lrp?
Thank you very much for all your help, I will be
waiting and checking my mail every
few minutes hehehe, see you and have a good day guys
Jo
Hey, what´s up?
I am using a normal bering 1.2 boot disk, but now I
need to add one module and another package (nicstar.o
and atmtools.lrp) and when I try to back up any
package or the floppy I don´t have space enough
because those files are too big. Is there any way to
make a boot disk in two
Hi, good morning:
I am having some problems trying to set a vlan with
the Bering rc4 distribution. I going to explain what I
did it and how, to see if anyone can find the problem
or the mistake, because I think I am following the
documentation pretty good.
First I am gonna describe the situati
Hi, good morning:
I am having some problems trying to set a vlan with
the Bering rc4 distribution. I going to explain what I
did it and how, to see if anyone can find the problem
or the mistake, because I think I am following the
documentation pretty good.
Here, this is a draw of what I am t
Hi, good morning:
I am having some problems trying to set a vlan with
the Bering rc4 distribution. I going to explain what I
did it and how, to see if anyone can find the problem
or the mistake, because I think I am following the
documentation pretty good.
Here, this is a draw of what I am try
Hi, how everybody is doing?:
I am having some problems trying to set a vlan with
the Bering rc4 distribution. I going to explain what I
did it and how, to see if anyone can find the problem
or the mistake, because I think I am following the
documentation pretty good.
Here, this is a draw of wh
will be really pleased if you can help me here,
because I need it for my final degree project and time
is running out.
Thank you for your time, I apreciate it.
Jose Luis Abuelo Sebio
___
Yahoo! Sorteos - http://loteria.yahoo.es
Juega a la Lotería
bridge with access ports?
I will be really pleased if you can help me here,
because I need it for my final degree project and time
is running out.
Thank you for your time, I apreciate it.
Jose Luis Abuelo Sebio
___
Yahoo! Sorteos - http
chine can only
> generate/accept non-vlan
> traffic. Maybe you just want to try out this
> particular VLAN+bridge
> combination.
>
> Regards,
> Leonard Ye
>
> On Wed, 2003-06-25 at 20:31, Jose Luis Abuelo Sebio
> wrote:
> > Hello everyone:
> >
> > I am
Hi everyone,
I am trying to set a vlan configuration, and reading
the guides or tutorials about Vlan I came up with some
questions that maybe you can answer me.
What I am trying to do with my configuration is
creating two machines PC1 and PC3 in a VLAN ID 10 and
PC2 and PC4 in VLANM ID 20.
Hi everyone,
I am trying to set a vlan but using vlan-unaware
machines ( PC1, PC2,PC3 and PC4 as you can see in the
picture).
Here the bridge is the one to do the tagging of the
frames and untag them to send them to the correct
machine (Because the vlan-unaware machines dont tag
their frames, a
Hi,
A few weeks ago, I asked you about how to do a
package, atmtools.lrp, and you told me that you had it
but you were not sure about if it worked or not. I
tried it, doing LANE and it seems to work pretty good.
If you want I cant tell you the configuration of my
experiment, so later you can put i
Hi everyone,
My name is Luis and I am studying C.S. at my
University in Spain. I am getting interest for this
proyect, but sometimes I feel that I don´t know enough
to understand the process of some projects you talk
here about.
I did a job about Vlan using LEAF Bering rc 4 and it
was prett
Hey how is everyone doing?
Let´s see if you can help me out here. I used to
work with LRP a few months ago, but now I wanna do it
again to install a firewall. The problem is that now I
have bought two NICs SureCom EP-320X-S to do the Two
interface option of the manual, but the my boot disk
doesn
hey how are you doing guys?
Here I send you another question about my NIC SureCom
EP-320X-S. I think that I have to install the module
tulip.o with dependences of pci-scan.o. So I install
pci-scan.o with no problem but when I try to install
the tulip.o I get a error message:
$insmod tulip
using
Hey how is everybody doing?
Let see if you can spot me here with my problem. I
use to work with Bering 1.2 for VLAN issues but now I
want to configure an old machine as a firewall using
the software shorewall which is include in Berig 1.2.
I have downloaded the quick start guide for a simple
c
Hey how is everybody doing?
Let see if you can spot me here with my problem. I
use to work with Bering 1.2 for VLAN issues but now I
want to configure an old machine as a firewall using
the software shorewall which is include in Berig 1.2.
I have downloaded the quick start guide for a simple
c
Hey how is everybody doing?
Let see if you can spot me here with my problem. I
use to work with Bering 1.2 for VLAN issues but now I
want to configure an old machine as a firewall using
the software shorewall which is include in Berig 1.2.
I have downloaded the quick start guide for a simple
c
Good morning everyone.
Let´s see if you can help me to find out what´s the
problem in the configuration of my local net.
Let´s start from the begining. I have a cable
operator which provides me intertet service, this
cable operator gave me a cisco router which I can not
manage but the cable ope
34 matches
Mail list logo
