Re: smile

2021-04-26 Thread Harvey Matyas
I thought that this group was suppose to be none political.It's surprising how people can stay something like screwing everything else upwhen everyone was silent when the country went through the worse economy since the great recession, had the capital under attack and did not say

Re: Wave 1st ever

2021-03-18 Thread Harvey Matyas
I think it looks pretty good. Harvey Matyas On Thursday, March 18, 2021, 08:25:04 PM CDT, Tim Ziegler wrote: Well it's not pretty but it's a start -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubs

Re: All I could do was shake my head and laugh

2021-03-09 Thread Harvey Matyas
ls@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas > *Sent:* Tuesday, 9 March 2021 2:18 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: All I could do was shake my head and laugh > > > > Tim > > >

Re: All I could do was shake my head and laugh

2021-03-08 Thread Harvey Matyas
hit the bike tire, from there it hit the ceiling and thenchipped the basement floor.  Even since I seldom throw objects around. Harvey Matyas On Monday, March 8, 2021, 09:03:01 PM CST, Tim Ziegler wrote: I wasn't laughing the other night when I moved a drying rack and a chain reaction

Re: All I could do was shake my head and laugh

2021-03-08 Thread Harvey Matyas
Thank you Bill, I just could not believe it when I looked at it after I first installed the hinge.  Once, I replaced all the interior doors at my house.  I had to cut hinges for all of the doors.  The last one, I somehow flipped it.  So when I looked at it, it was about a foot off the ground. 

Re: for beginners

2021-02-18 Thread Harvey Matyas
I got the same error, it has to do with certificates or something like that. I told my virus software to ignore it and it worked. It didn't like it but it works, On Thu, Feb 18, 2021 at 7:51 PM M.W.Foscue wrote: > Bill, > > I tried the below link you sent to the turningaround site. No luck. >

Re: Looking for some new projects.

2021-02-15 Thread Harvey Matyas
and clamping design. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sun, Feb 14, 2

Re: Looking for some new projects.

2021-02-14 Thread Harvey Matyas
degrees was cut through, the rest took about 10 more tries. Either that or the bit dropped down and started cutting that deep. If I cut the circle for this guy, he may also want me to start cutting out signs. He does something with fabic Harvey Matyas On Sunday, February 14, 2021, 09:00:54 PM CST

Re: Looking for some new projects.

2021-02-14 Thread Harvey Matyas
6330 320-294-5798 shop320-630-2243 cell On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas wrote: Hi Curt You already probably know about this guy but here goes. Projects Archives | Turning for Profit | Woodturning | Lathe | He has like a user group where  he periodically sends out emails that

Re: Looking for some new projects.

2021-02-14 Thread Harvey Matyas
Hi Curt You already probably know about this guy but here goes. Projects Archives | Turning for Profit | Woodturning | Lathe | He has like a user group where he periodically sends out emails that have projects in them. I hope this helps, keep warm.

Re: Same old bone, Different cut

2021-01-10 Thread Harvey Matyas
Curt You did a great job! Harvey On Sun, Jan 10, 2021 at 7:32 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Everyone > > After a lot soul searching I decide to go for it. I said to my self, > What's the worst that could happen? (don't

Re: MERRY CRISTMAS

2020-12-24 Thread Harvey Matyas
Merry Christmas to all and to all a safe night! On Thu, Dec 24, 2020 at 3:50 PM Brigitte Graham wrote: > Hi LOM Team, > Hope you all have a Christmas that is filled with love, laughter and > ...Turkey! > Legacy Widow > > On Thu, 24 Dec 2020 at 19:30, wrote: > >> Well its Christmas

Re: Candy Cane Ornaments

2020-12-12 Thread Harvey Matyas
n Sat, Dec 12, 2020 at 2:35 PM wrote: > Harvey please post the link to your video when you do it . > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas > *Sent:

Re: Candy Cane Ornaments

2020-12-12 Thread Harvey Matyas
Tim After I was done, I took pictures to post, my wife saw them and asked me "Why did you paint the names in black?" She said green or red would have been better. I plan on doing some more for a youtube video. I'll paint those green! Take care. Harvey On Sat, Dec 12, 2020 at 1:00 PM Tim

Re: I'm thinking of making this to mill branches

2020-11-26 Thread Harvey Matyas
I just watched his Wet Sanding: 5 Reasons for Woodturners Does it really reduce sanding dust? Harvey On Thu, Nov 26, 2020 at 8:56 PM wrote: > Make sure you watch carl Jacobson videos too his dose some cool stuff too > https://www.youtube.com/watch?v=0yH9fMK9eU8_channel=CarlJacobson > > > >

Re: Who wants to buy a priceless piece of art cheap?

2020-11-25 Thread Harvey Matyas
m for new ones lol no > hopefully to learn from them right. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Wed, Nov 25, 2020 at 2:4

Re: Who wants to buy a priceless piece of art cheap?

2020-11-25 Thread Harvey Matyas
they drop in > WAY too often! LoL.) > Mac > -- > > -Original Message- > From: Harvey Matyas > Sent: Nov 25, 2020 8:38 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Who wants to buy a priceless piece of art cheap?

Re: Who wants to buy a priceless piece of art cheap?

2020-11-25 Thread Harvey Matyas
; 320-630-2243 cell > > > On Tue, Nov 24, 2020 at 10:11 PM Harvey Matyas > wrote: > >> It started out okay. Attached is a picture showing the two holders that >> I made for the head and tail stock. >> Also, the finish cut before I took it apart to turn the pie

Re: Who wants to buy a priceless piece of art cheap?

2020-11-25 Thread Harvey Matyas
s. ;-) > > Keep up the good work. > > talk more latter. > > C.A.G. > > On Tuesday, November 24, 2020, 11:11:16 PM EST, Harvey Matyas < > hmatyas0...@gmail.com> wrote: > > > It started out okay. Attached is a picture showing the two holders that I > made for

Re: Who wants to buy a priceless piece of art cheap?

2020-11-25 Thread Harvey Matyas
gt; projects on the "Old school" Legacy Ornamental Mill User Group postings. > LoL! > (The "Old school" woodworking "gods" are watching you! Its Karma baby! > LoL! ) > Mac > -- > > -Original Message- > From: Harvey

Re: Who wants to buy a priceless piece of art cheap?

2020-11-24 Thread Harvey Matyas
I was trying my first inside ornament. Since I did not know how deep to go on the first side, I took a guess. I was wrong. I will try again but I have already made changes. On the tailstock, I originally drilled a piece of plywood and locked it against the circle plate on the tailstock with a

Re: Who wants to buy a priceless piece of art cheap?

2020-11-24 Thread Harvey Matyas
Project2 is the priceless object. On Tue, Nov 24, 2020 at 5:57 PM Harvey wrote: > My wife didn't buy it (or like it) either. > > I was right there by the machine watching it when I noticed that the > router bit cut through the piece but it was still together. I hit the > wrong button and

Re: Not done on a LOM but it could

2020-11-04 Thread Harvey Matyas
k, Simple but nice. I too might use a design something like > what you are doing. > Thank you for the idea. > > C.A.G. > > On Tuesday, November 3, 2020, 08:07:00 AM EST, Harvey Matyas < > hmatyas0...@gmail.com> wrote: > > > The reason for the different sizes is I

Re: Not done on a LOM but it could

2020-11-03 Thread Harvey Matyas
The reason for the different sizes is I was using scrap wood, One was from a ballet, one was a piece of blackwalnut from someone's tree that they cut down, and the last one was a branch that I found. On Tue, Nov 3, 2020 at 7:04 AM Harvey Matyas wrote: > Hi Curt > > The one in black wa

Re: Not done on a LOM but it could

2020-11-03 Thread Harvey Matyas
Hi Curt The one in black walnut is 5 inches in height Large snowball 1.9 inches, 2nd snow ball is 1.7 inches, head is 1.2 inches, hat is .75 inches, Brim of hat 1.3 inches Second snowman is 4.75 inches high, large snowball is 1.8 inches 2nd snowball is 1.6 inches, head is 1.2 inches, hat is .84

Re: Not done on a LOM but it could

2020-11-02 Thread Harvey Matyas
I was thinking of doing that also. However, I thought I would try to design something as one unit. I have 2 ovolo router bits that are like 1.5 inch radius and 1.25 inch radius. So I would be able to "cut" a 3 inch and a 2.5 inch ball. I got these two bits not knowing what they were. I also

Re: Not done on a LOM but it could

2020-11-02 Thread Harvey Matyas
I designed it on Vcarve and then cut it on my 4th axis. I still don't have the machine working the way that I want it. I had to lower the Z axis's zero twice to get it to the dimension that I wanted. Going from the headstock to the tailstock there was a slight drift in dimension going from zero

Re: Question to all?

2020-10-16 Thread Harvey Matyas
arts, >> Only one box was water damaged, and that box was the manual, paperwork and >> DVD's. So nothing of great valve was lost there! >> >> >> I have set aside the *Design kit* for a prize , If everyone is up for A >> game? >> >> And I have set a few thing aside

Re: Question to all?

2020-10-14 Thread Harvey Matyas
Hi Curtis Instead of the most posts, how about different project ideas or modifications to the LOM? (Just an idea or suggestion) Harvey On Wed, Oct 14, 2020 at 2:28 AM M.W.Foscue wrote: > Hi Curtis, > Sounds Like a good idea to me. > And "Congrats" on scoring that Mill (or parts &

Re: Did anyone get a email from Legacy about their site crashing?

2020-10-12 Thread Harvey Matyas
That is correct. I did not open it in case it was a trick. I went on youtube and typed Legacy and I did see several youtube videos. So that is why i posted the message to see if I was the only one or if others did get it and if it was something bad to warn everyone. On Mon, Oct 12, 2020 at

Re: Want to put a motor my 1200

2020-07-16 Thread Harvey Matyas
That is a really nice job on the LOM. impressive! On Thu, Jul 16, 2020 at 7:09 PM Chainlink wrote: > Ok, I finally got around to posting. If anyone has questions, please ask. > The reason I did this exactly the way I did was because I wanted to be able > to reverse it all and go back to a

Re: Yorkshire grit

2020-04-19 Thread Harvey Matyas
This site has places all over the world. https://yorkshire-grit.com/product-page/ The above link is the USA site. Harvey On Sun, Apr 19, 2020 at 8:56 PM Harvey Matyas wrote: > Bill > > Is this what you are talking about? > > > https://www.thewalnutlog.com/woodworking-store

Re: Yorkshire grit

2020-04-19 Thread Harvey Matyas
Bill Is this what you are talking about? https://www.thewalnutlog.com/woodworking-store/#!/Yorkshire-Grit-USA/c/19617873/offset=0=normal Harvey On Sun, Apr 19, 2020 at 8:46 PM wrote: > Im putting a call out for a tin of Yorkshire grit sanding past, I use it > to sand my work there is none

Re: Legacy Shop Smith Adapter

2020-03-29 Thread Harvey Matyas
Curt Make it out of recycled plastic where the part is made out of different color of plastic to make it look unique and special. Harvey On Sun, Mar 29, 2020 at 2:51 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > I have a question for

Re: Legacy Shop Smith Adapter

2020-03-29 Thread Harvey Matyas
Curt What a great idea! I was trying to figure out how to adapt the LOM holder to my 4th axis on my CNC machine. I had one "accident" where a centered the piece in the middle of the wood instead of at the beginning. Before I could stop the machine it hit the Nova wood turning chuck right where

Re: the mad days

2020-03-20 Thread Harvey Matyas
The only reason that I know about the Spanish flu was when my parents died, we found an old family picture of my grandpa as a child. On the back of the picture it stated within a year all but two (my grandpa and one of his brothers) were dead. My parents never showed us that picture when they

Re: the mad days

2020-03-19 Thread Harvey Matyas
What does kangaroo taste like? Do you need a permit or is there a hunting season on them? I don't know anyone that has eaten a kangaroo. On Thu, Mar 19, 2020 at 5:09 PM wrote: > Hi everyone been very quiet lately where is everyone don’t worry you cant > catch the dreaded black death everyone

Re: Legacy 900 cnc build

2020-03-01 Thread Harvey Matyas
Thank you for the information, I was not sure if 23's would work. My problem is the controller I have uses 24 to 36 volts. At least now I may try to connect the steppers to the screws to see what happens. On Sun, Mar 1, 2020 at 5:06 PM IAN wrote: > They are Nema 23 stepper motors with 48

Re: Russ youtube channel

2019-11-13 Thread Harvey Matyas
Ryan Try this https://www.youtube.com/channel/UCOEsQRWHC2L6-Y1S2X297Zw Harvey On Wed, Nov 13, 2019 at 9:01 PM Ryan Jurgens wrote: > So how do you find this Youtube channel?.I searched but couldnt find it. > Maybe I am searching the wrong term? > > On Wed, Nov 13, 2019, 8:

Re: Russ youtube channel

2019-11-13 Thread Harvey Matyas
>From Russ You must be a member. I thought they all knew I have my own youtube channel. I have made many improvements (& videos) to my LOM and I use to notify the group of these in the past. I prefer YouTube for sharing LOM ideas and methods. All Googlegroup members are invited here. I know

Re: 2006 Legacy LOM 1200

2019-11-12 Thread Harvey Matyas
Ryan Looks brand new, good job. Harvey On Tue, Nov 12, 2019 at 8:45 PM Ryan Jurgens wrote: > I have a pretty good dust collector setup now. I set the mill right next > to the collector with its own 4" collector hose, with an option to add a > second. A clean shop is always a goal for me. 

Re: I need more room in my work shop

2019-10-06 Thread Harvey Matyas
s to your Legacy. I am very interested. I >> have to hold ups cash and time to come and get it. >> I will see what I can come up with. here in the next few days. I assume >> the drive motor runs? >> You had not sold anything from it either then? >> >> Kind Regards,

Re: I need more room in my work shop

2019-10-03 Thread Harvey Matyas
4171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Thu, Oct 3, 2019 at 8:58 PM Harvey Matyas > wrote: > >> Hi Tim >> Ryan came over to my house and posted pictures on this thread about 7 >> days ago September 26 at 5:0

Re: I need more room in my work shop

2019-10-03 Thread Harvey Matyas
9 at 7:42:33 PM UTC-5, Tim Ziegler wrote: >>>> >>>> Harvey I have pix coming stay tuned as they are down loading. >>>> >>>> Kind Regards, >>>> >>>> Timothy J. Ziegler >>>> Ziegler WoodWork & Specialty >>>

Re: I need more room in my work shop

2019-09-25 Thread Harvey Matyas
understand the 12 hour shift thing been there done that. tough shift. 3 > days? > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Wed, Sep 25, 2019

Re: I need more room in my work shop

2019-09-25 Thread Harvey Matyas
. I > guess were a bit over 6 hours from you. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Tue, Sep 24, 2019 at 5:26 PM Harvey Matyas >

Re: I need more room in my work shop

2019-09-24 Thread Harvey Matyas
may have interest in the drive motor > (also) $$ asking ? Have the rest so pass it on to a buyer if they do not > need ? > > On Thu, Sep 19, 2019 at 3:51 PM Harvey Matyas > wrote: > >> I know someone else was looking for a motor. >> If a bunch of members can put somethi

Re: Odd ball question to our group

2019-09-22 Thread Harvey Matyas
Curt Is this what you where trying to find? https://groups.google.com/forum/?hl=en#!searchin/legacy-ornamental-mills/NOVA$20OT$20chuck/legacy-ornamental-mills/fd72hz5XLyU/2HVXwjRIPMgJ Harvey On Sun, Sep 22, 2019 at 9:08 PM 'Curt George' via Legacy Ornamental Mills <

Re: I need more room in my work shop

2019-09-19 Thread Harvey Matyas
lls@googlegroups.com> wrote: > Fair enough. > > It never hurt to ask. I have some projects that I am planning to make. > Thank you for your reply. > > C.A.G. > > On Thursday, September 19, 2019, 08:44:32 AM EDT, Harvey Matyas < > hmatyas0...@gmail.com> wrote: > > >

Re: I need more room in my work shop

2019-09-19 Thread Harvey Matyas
Curt I would like to sell everything at once. I would part it out if I was sure everything would sell If the group got together and said I will buy the bits for X, and you buy the gear linkage for Y and some else buts the rails for z and the shipping is covered and x y and z is sound $800, I

Re: I need more room in my work shop

2019-09-18 Thread Harvey Matyas
No, it isn't that big. It is 3 ft by about 20 inches. However, the person that built the work table made it like 6 feet long so that a computer can be placed by it. Harvey On Wed, Sep 18, 2019 at 11:40 AM rtjurg...@gmail.com wrote: > Harvey, will your new cnc be big enough to cut 4x8 sheets

Re: australia

2019-04-08 Thread Harvey Matyas
Bill That is really interesting. I did the math for total square miles not counting Alaska and Hawaii It is USA 3,468,000 square miles vs 2,970,000 square miles Give or take a square mile or two. Something I always found interesting. We had 3 foreign exchange students from Europe. Besides

Re: Lathe Duplicator - by Shopsmith

2019-01-12 Thread Harvey Matyas
Has anyone ever made the lathe duplicator that is in ShopNotes issue 132 pages 28 through 31? On Sat, Jan 12, 2019 at 12:41 PM MWF wrote: > I know many of our LOM Group Members own Shopsmiths. > The below link to a Shopsmith Lathe Duplicator (in Albany, Ohio?) may be > of interest to them. >

Re: LOM near Wisconsin and Illonois border

2019-01-11 Thread Harvey Matyas
I checked through the tool section and I did not see it. It must have sold. On Fri, Jan 11, 2019 at 5:24 PM Tim Ziegler wrote: > Must be gone. Clicked on link and said deleted by Author. > Wow they go fast. Sure glad we jumped on the 1200 in Texas. lol > > Kind Regards, > > Timothy J. Ziegler

Re: Rotary table modifications.

2018-12-12 Thread Harvey Matyas
Tim Where are the low profile clamps located? I checked the site at https://ornamentalmills.com/turningaround/index.html Thank you. Harvey On Wed, Dec 12, 2018 at 12:55 AM Tim Krause wrote: > I thought of putting some pem inserts into the rotary table so you could > do what you are

Re: for those who wand a #2 MT tail stock, you might like to see this?

2018-10-20 Thread Harvey Matyas
Check the shipping price, it $79.69, the shipping is more then the part. Harvey On Sat, Oct 20, 2018 at 1:13 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello again. > This looks like it would be easy to adapt to the Legacy's tail stock.

Re: New (YES - NEW) Legacy Model 1200

2018-09-25 Thread Harvey Matyas
we include him, even though in poor health, it might be > of some encouragement from a personal point of view? Just a thought. > > Ryan > > On Mon, Sep 24, 2018, 11:22 PM Harvey Matyas > wrote: > >> Frank and Ryan >> >> I would be interested in getting together

Re: New (YES - NEW) Legacy Model 1200

2018-09-24 Thread Harvey Matyas
Frank and Ryan I would be interested in getting together. I have had my Legacy for a few years but haven't really done anything with it. I also know a 4th person that has a Legacy. However, he is not in the best of health right now. Harvey On Mon, Sep 24, 2018 at 7:43 PM 'Frank Vidmar' via

Re: Ornamental Mills Around the World

2018-09-24 Thread Harvey Matyas
Ryan Where in Milwaukee? I'm in Greendale On Mon, Sep 24, 2018 at 1:24 PM Ryan Jurgens wrote: > Milwaukee Wisconisn, Legacy 1200 with z-axis and rotary table. (In the > original shipping boxes unassembled) > > On Mon, Sep 24, 2018, 2:02 PM Tim Krause wrote: > >> Hi Ryan, >> >> Thanks for

Re: legacy site

2018-09-23 Thread Harvey Matyas
I went to June 9th 2004. I was able to navigate along a lot of the old website. Some days and years will only have a single screen. On Sun, Sep 23, 2018 at 8:35 AM Harvey Matyas wrote: > I think that I figured it out. > First go to https://archive.org/web/ > Then type or p

Re: legacy site

2018-09-23 Thread Harvey Matyas
know if this will help. On Sun, Sep 23, 2018 at 8:15 AM Harvey Matyas wrote: > I tried the Wayback Machine. I not familiar with the site but they claim > that they have backup items since 1999 on Legacy. > If anyone knows how to use it, they may be able to provide more >

Re: legacy site

2018-09-23 Thread Harvey Matyas
I tried the Wayback Machine. I not familiar with the site but they claim that they have backup items since 1999 on Legacy. If anyone knows how to use it, they may be able to provide more information. On Sun, Sep 23, 2018 at 4:57 AM Bawdsey64 wrote: > ​ > Hi Richard > > As time passes things

Re: Question from a new member.

2018-06-17 Thread Harvey Matyas
I don't know if this link will work https://groups.google.com/forum/?hl=en#!searchin/legacy-ornamental-mills/%221200$20manual%22%7Csort:date/legacy-ornamental-mills/k8jUT0b75pI/NkBd_vFUwnIJ Harvey On Sun, Jun 17, 2018 at 7:44 PM MWF wrote: > Hello Joe / "Varmit", > > I assume you have not

Re: Need help with Clamping systems and contour following setup

2018-04-17 Thread Harvey Matyas
I don't know if this will help you. https://groups.google.com/forum/#!msg/legacy-ornamental-mills/V9bvBJB7iJw/1NYRG2J8NQAJ;context-place=forum/legacy-ornamental-mills Go to the user's group email and type manual in the search. Harvey On Tue, Apr 17, 2018 at 9:54 PM, Tekin Turan

Re: Dinner table legs profile

2018-04-10 Thread Harvey Matyas
Mike No I am not, however, I do have access to it at the Milwaukee Makerspace. I have been tempted to make a lathe duplicator from one of my wood magazines, now may be the time to do it. Harvey On Tue, Apr 10, 2018 at 9:32 AM, Okla Mike (Liltwisted) < legacym...@iglide.net> wrote: > I guess

Re: Ornamental Mills Questionnaire

2018-04-08 Thread Harvey Matyas
I submitted mine yesterday. Harvey On Sun, Apr 8, 2018 at 6:07 PM, Bill Bulkeley wrote: > Come on people do you want the group to keep going or not it’s just a few > simple questions > > Bill > > > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: >

Re: Working toward a Legacy Mill

2018-04-02 Thread Harvey Matyas
After reading your email, I read an email on making a box. This article was attached https://www.chrisfinke.com/2018/02/11/walnut-maple-bandsaw-box/ He only made 18 mistakes on his project. On Mon, Apr 2, 2018 at 8:09 AM, 'Curt George' via Legacy Ornamental Mills <

Re: Do you think the group could put together a book?

2018-01-17 Thread Harvey Matyas
Mac Yes, that is what I was trying to convey or request. I have shop tips on a DVD, do I want to print all of it, no, however I have printed out several articles. It is also easy to search and/or browse through and it also takes up a lot less space then magazines. Harvey On Wed, Jan 17, 2018

Re: happy new year

2017-12-31 Thread Harvey Matyas
Cold! you call 8 deg F cold! It's -1 def F here and according to the weather service fells like - 20 deg f. I don't know if the F is for Fahrenheit or something else. Also, a piece of trivia, 50 years ago today the Green Bay Packers beat the Dallas Cowboys in the Famous Ice Bowl game. Take

Re: merry christmas

2017-12-26 Thread Harvey Matyas
Russ I did not know that you lived in Salem, WI. I'm from Greendale, WI, a suburb of Milwaukee Harvey On Tue, Dec 26, 2017 at 8:52 AM, russ veinot wrote: > Merry Xmas to all from Salem, WI. We got our white Xmas on the 24th, but > didn't slow travel here. > > Russ > > >

Re: merry christmas

2017-12-24 Thread Harvey Matyas
Merry Christmas from Greendale, WI! Got a paint sprayer and a router bit for woodworking. I enjoy this site a lot although I don't post often. Harvey On Sun, Dec 24, 2017 at 2:05 PM, Bill Bulkeley wrote: > Ho ho ho well its Christmas morning here now i hope Santa

Re: making a tap for the 5/8-4 acme thread

2017-08-07 Thread Harvey Matyas
Is it called InstaMorph ? https://www.youtube.com/watch?v=hD6IuhZT9-4 On Mon, Aug 7, 2017 at 6:53 PM, Brigitte Graham wrote: > Hi Gentlemen, > Have you thought of using the plastic that is mouldable after it has been > melted in boiling water? > I can't remember

Re: Digest for legacy-ornamental-mills@googlegroups.com - 10 updates in 2 topics

2017-01-25 Thread Harvey Matyas
I know the answer to that one, it's a classic. On Wed, Jan 25, 2017 at 3:32 AM, Martin wrote: > Hello all, in regard to the argument Right or Left this was debated in > my school and lead to the class doing a research lesson into it. The > position in ancient

Re: Miniature spindles

2016-12-22 Thread Harvey Matyas
If anyone has issue 132 of ShopNotes, they have a "easy to use Lathe Duplicator" (that's the title) that you can build. It is on page 28 through 31. Harvey On Thu, Dec 22, 2016 at 12:21 PM, Richard Ellis wrote: > Thanks for the reply Michael, > it seems very good but

Re: Some Ideas - Barbed Wire

2016-09-21 Thread Harvey Matyas
I live in a suburb near Milwaukee. The deer are protected because you are can't hunt in this area. If the deer herd gets too big, they hire hunters to thin the herd. However, it is never enough. Two years ago we had over 10 deer in our backyard and another time we had 4 bucks together. They are

Re: New Members and Moderation

2016-06-07 Thread Harvey Matyas
can get good masking tape and super glue I’m > defiantly trying this one. > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Harvey Matyas > *Sent:* Monday, 6 June 2016 6:16 AM > *To:

Re: New Members and Moderation

2016-06-05 Thread Harvey Matyas
I have not used the method described on the link below but plan to in the near future. I need to buy the supper glue and accelerant. It is not double sided tape but hopefully a better method. Harvey https://www.youtube.com/watch?v=3uTsQ3dYRrk On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns

Re: Youtube Video of Barley Twist Being Milled on Legacy Revo

2016-03-30 Thread Harvey Matyas
In Greendale WI, a large area may be an acre or 2. I think in my sub division that I have the biggest yard at 1/3 acre. In the City of Milwaukee, a normal yard 120 yards by 80 yards (don't quote me on this). Harvey On Wed, Mar 30, 2016 at 8:24 PM, MWF wrote: > Roger, >

Re: wet wet - "It'snow joke"

2016-01-28 Thread Harvey Matyas
In Milwaukee, Wisconsin, when it snows they salt the streets and the freeways. This may make it safer to drive but the salt coats the cars and windshields. So sometimes you are constantly spraying the windshield with fluid to keep it clean. The cars get coated with salt and needs to be washed.

Re: wet wet wet - "It'snow joke"

2016-01-28 Thread Harvey Matyas
My youngest daughter lived up near Seattle for 3 years. It's a great part of the country. She now lives in New Orleans. So for vacation we get to go to a different part of the country. On Thu, Jan 28, 2016 at 11:36 AM, rookie wrote: > I feel your pain Harvey, I

Re: Spindle Drive set up.

2015-12-28 Thread Harvey Matyas
Hi Curtis How fast is fast? If you could control the motor, what would a good range for RPM be? Thanks Harvey On Mon, Dec 28, 2015 at 5:58 PM, CURTIS GEORGE wrote: > Hello Everyone. > This is a topic that I keep bring up, but no one ever says anything about > it, So

Re: Good, Bad, or indifferent.

2015-08-28 Thread Harvey Matyas
Have you check junk yards. I belong to the Milwaukee Makerspace and there is a scrap yard that keeps 80/20 parts on the side for us. We buy it based on weight. Someone was able to buy a scrape piece of equipment and is making a 4 ft by 8 ft plasma cutter. Basically, this place takes apart old

Re: New Legacy Drill press

2013-12-17 Thread Harvey Matyas
Curt How did you make the z axis? What control how the drill is lowerer? Thank you Harvey On Mon, Dec 16, 2013 at 5:04 PM, curt george curtgeo...@wowway.com wrote: Thank you Dexter. ;-) C.A.G. - Original Message - *From:* Dexter Bland dexterbl...@gmail.com *To:*

Re: Useful device

2013-10-30 Thread Harvey Matyas
Here is an interesting twist in at DRO http://www.network54.com/Forum/9013/message/1383042493/Quick+project-+Poor+man%27s+DRO harvey On Wed, Oct 30, 2013 at 8:46 PM, mwfos...@earthlink.net wrote: Roger, I agree with your comment as regards Amazon. I made a poor selection of words to

Re: TEST PICTURE

2013-09-23 Thread Harvey Matyas
I can see two pictures of Jake the dog On Mon, Sep 23, 2013 at 2:45 AM, curt george curtgeo...@wowway.com wrote: ** Hello Everyone, This is a test to make sure Gene's problem receiving pictures is not form the group page. He was able to recive one through a privite e-mail, Please let me

Re: A rough diamond or a small pollow cut

2013-07-07 Thread Harvey Matyas
Below is a link where a guy uses a lathe and converts it to cnc. Better pictures and he explains things a little bit http://pdxtex.blogspot.com/2012/05/router-lathe-first-threads.html On Sat, Jul 6, 2013 at 1:44 PM, Greg Knudtson groovyw...@gmail.com wrote: Note this is being done a

Re: A rough diamond or a small pollow cut

2013-07-06 Thread Harvey Matyas
There are several youtube videos on the shopsmith machine. Below is one of them https://www.youtube.com/watch?v=Ssm1aLgkvsE Harvey On Fri, Jul 5, 2013 at 8:13 PM, curt george curtgeo...@wowway.com wrote: ** Hello Mac I did send this gentleman a message asking if we could see how he set up

Re: Z axis lift

2013-05-25 Thread Harvey Matyas
Message - *From:* Harvey Matyas hmatyas0...@gmail.com *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Friday, May 24, 2013 6:47 PM *Subject:* Z axis lift The item list below is for sale close to me. Would this work with the Legacy? Thank you Harvey http://racine.craigslist.org

Re: Z axis lift

2013-05-25 Thread Harvey Matyas
machine? Stepper control is not practical in that case. -Tim - Original Message - *From:* Harvey Matyas hmatyas0...@gmail.com *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Saturday, May 25, 2013 7:30 AM *Subject:* Re: Z axis lift Thanks for the advice. I was wondering

Z axis lift

2013-05-24 Thread Harvey Matyas
The item list below is for sale close to me. Would this work with the Legacy? Thank you Harvey http://racine.craigslist.org/tls/3782794020.html -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop

Re: Chatter wave

2013-04-28 Thread Harvey Matyas
that it was hand carved. But it dose bring up some idea's... Thanks Harvey. C.A.G. - Original Message - *From:* Harvey Matyas hmatyas0...@gmail.com *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Sunday, April 28, 2013 8:23 PM *Subject:* Re: Chatter wave Curt I

Re: The messy woodworker

2013-03-20 Thread Harvey Matyas
I took a picture of it, I did not put it in the blog. I will do that tonight or tomorrow. I'm over 100, I thing 114! On Wed, Mar 20, 2013 at 5:01 AM, CURTIS GEORGE curtgeo...@wowway.comwrote: I see the Dyna Glide, tabel saw... But where is the Legacy in your shop? What's your count now?

The messy woodworker

2013-03-18 Thread Harvey Matyas
I don't know if this is allowed, and if not please delete it. Below is a link to a blog that I started. What I want to do is embarrass myself into getting my workroom cleaned. It will be a long process for me. It has already been effective as I have cleaned off my table saw, Legacy and a work

Legary

2013-03-12 Thread Harvey Matyas
http://milwaukee.craigslist.org/tls/3676034778.html Legacy 1200 Ornamental Mill located west of Milwaukee, Wisconsin -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it,

Re: Another 1200 on Ebay -- Oregon

2013-03-07 Thread Harvey Matyas
http://www.ebay.com/itm/Legacy-Woodworking-Ornamental-Mill-Model-1200-Complete-With-Router-Table-Z-Axis-/230941503237?pt=LH_DefaultDomain_0hash=item35c52faf05 Legacy Woodworking Ornamental Mill Model 1200 Complete With Router Table Z-Axis

Re: Entasis

2013-02-22 Thread Harvey Matyas
Is this what you are looking for? Ionic*DESCRIPTION*: Ionic *shafts* were taller than Doric ones. This makes the columns look slender. They also had *flutes*, which are lines carved into them from top to bottom. The shafts also had a special characteristic: *entasis*, which is a little bulge in

Re: Who all was there?

2013-02-06 Thread Harvey Matyas
During the event, it had a list of viewers, there were 18 people listed, I think one or two people were listed twice. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it,

Re: Who all was there?

2013-02-05 Thread Harvey Matyas
I heard most of the talk, I left from 4:30 to 4:45 or so c) Am I correct in remembering that there were 10,000 manual ornamental mills sold? I thought that he said 10,000 units. During the talk he encouraged the group to share videos and projects with each other. He also mentioned videos on

Re: Discussion session with Legacy

2013-01-21 Thread Harvey Matyas
I also would be interested in listening in or watching it later on any subject matter having to do with the manual Legacy. Harvey -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to

Re: Custom 90 degree brackets

2012-11-14 Thread Harvey Matyas
: Harvey Matyas hmatyas0...@gmail.com To: legacy-ornamental-mills@googlegroups.com Subject: Re: Custom 90 degree brackets Date: Sat, 10 Nov 2012 21:06:28 -0600 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send

  1   2   >