WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Thu, Feb 16, 2023 at 7:54 PM Mike Newman <mrnewma...@outlook.com> wrote:I was able to sneak out to the shop tonight to try out the thin stock support. It worked almost perfect and much better than the f
ve the dimension for the hdpe blocks used on the factory thin stock support? I finally found a block of the material that I can make my own, but wanted to get the dimensions. Overall dimensions and then size/position of the v-notch should be all I need. I will attach it to my cross member I u
pieces are 2 1/4” w x 1 1/4” L x 1 1/4” thick
> Denson
> Sent from Denson's iPhone
>
> On Feb 13, 2023, at 5:20 PM, Mike Newman wrote:
>
> Does anyone already have the dimension for the hdpe blocks used on the
> factory thin stock support? I finally found a block of the mater
he hdpe blocks used on the
> factory thin stock support? I finally found a block of the material that I
> can make my own, but wanted to get the dimensions. Overall dimensions and
> then size/position of the v-notch should be all I need. I will attach it
> to my cross member I used for my
t;
> Does anyone already have the dimension for the hdpe blocks used on the
> factory thin stock support? I finally found a block of the material that I
> can make my own, but wanted to get the dimensions. Overall dimensions and
> then size/position of the v-notch should be al
anyone already have the dimension for the hdpe blocks used on the factory
thin stock support? I finally found a block of the material that I can make my
own, but wanted to get the dimensions. Overall dimensions and then
size/position of the v-notch should be all I need. I will attach it to my
Mike those pieces are 2 1/4” w x 1 1/4” L x 1 1/4” thickDensonSent from Denson's iPhoneOn Feb 13, 2023, at 5:20 PM, Mike Newman wrote:Does anyone already have the dimension for the hdpe blocks used on the factory thin stock support? I finally found a block of the material that I can make my own
Does anyone already have the dimension for the hdpe blocks used on the
factory thin stock support? I finally found a block of the material that I
can make my own, but wanted to get the dimensions. Overall dimensions and
then size/position of the v-notch should be all I need. I will attach
Please forgive me but im not seeing a thin stock support in the pic that what
we were talking about
Or am I missing something?
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of 4 Jim Carpenter
Sent: Wednesday, 31 March 2021 5:06 PM
To: To:
Subject: Re: revo thin
Yes and yes very ridged
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 March 2021 10:32 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: revo thin stock support
Hey Bill thanks for posting that. So its basically 1/2 or whats
shop
320-630-2243 cell
On Tue, Mar 30, 2021 at 1:54 AM wrote:
> Here is a pic of my revo thin stock support legacy to my knowledge never
> made one.
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Or
>> wow you ever decide you don't have a use for that I've been looking
>>>>>> for since I bought my LOM.
>>>>>> The thin Stock Follower that is.
>>>>>>
>>>>>> Kind Regards,
>>>>>>
>>>>>> T
1:26 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> Did you make your own Bill? Angle bracket style Vertical vise.
>
> Or are you referring to the sylus's
>
>
>
> *Sent:* Monday, 30 November 2020 1:13 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> I know. Sounds like you got the talent to make one yourself.
>
>
>
> On Sun, Nov
gt;> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler
>>>> wrote:
>>>>
>>>>> wow you ever decide you don't have a use for that I've been looking
>>>>> for since I bought my LOM.
>>>>> The thin Stock Follower that is.
>>>&g
No I made my own styles
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 30 November 2020 1:26 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower
Did you make your
ills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> I know. Sounds like you got the talent to make one yourself.
>
>
>
> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler wrote:
>
> Yea just kidding around R
> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> Foreston MN 56330
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman wrote:
>>>
>>>> New i
Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman wrote:
>>
&g
t; To: legacy-ornamental-mills@googlegroups.com
> Subject: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower
>
> New in the box (NIB)
>
> Thin Stock Support: Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports materia
@googlegroups.com
Subject: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower
New in the box (NIB)
Thin Stock Support: Mounts to the underside of the adjustable bed rail with 2
- 90 degree mounting brackets, and supports material while milling thin stock
between 5/8" and 1 7/8 &q
5 AM Ray Leaman wrote:
> New in the box (NIB)
>
> Thin Stock Support: Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
> Thin Stock Follo
- Accessories: Thin Stock Support and Thin Stock Follower
New in the box (NIB)Thin Stock Support: Mounts to the underside of the adjustable bed rail with 2 - 90 degree mounting brackets, and supports material while milling thin stock between 5/8" and 1 7/8 " thick.Thin Stock Followe
I wish you Luck Tim.
I will keep my eyes open for you...Take care.
C.A.G.
On Tuesday, June 4, 2019, 8:12:23 AM EDT, Tim Ziegler
wrote:
STILL LOOKING!
For any of you out there that have these parts and are possibly thinking you
don't use them, I'd be interested in them.I know I posted
STILL LOOKING!
For any of you out there that have these parts and are possibly thinking
you don't use them, I'd be interested in them.
I know I posted this before, but I really could use the:
Thin Stock Support
Thin Stock Follower
Vertical Bench Vise
Wouldn't mind finding a 4X Gear Upgrade
ind one
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 2 May 2019 9:30 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: T
320-630-2243 cell
On Wed, May 1, 2019 at 11:25 PM Bill Bulkeley wrote:
> I wish you luck with your search Tim I have the thin stock support not for
> sale before you ask I too would like the legacy thin stock follower but I
> will most likely have to make it.
>
> If you have
https://web.archive.org/web/20050303233255/http://www.legacywoodworking.com/index.cfm>
> > Products
> <https://web.archive.org/web/20050303233255/http://www.legacywoodworking.com/productList.cfm>
> > Mill Accessories
> <https://web.archive.org/web/20050303233255/http://www
I wish you luck with your search Tim I have the thin stock support not for sale
before you ask I too would like the legacy thin stock follower but I will most
likely have to make it.
If you have some rail the rest of the thin stock support is just 2 blocks of
delrin with a 90 degree v cut
hand
experiences with this parts.(for me.) Perhaps a few photo's could help clear
out some of the cob-webs on this topic ? ;-)
Here are some pictures that Tim is looking for...
C.A.G.
|
|
|
| | |
Thin Stock Follower |
| Home > Products > Mill Accessories > Thin Stock Support
I'm still looking for these parts.
Kind regards,
Tim of ZWW
On Monday, February 11, 2019 at 8:06:00 AM UTC-6, Tim Ziegler wrote:
>
> Good morning fellow LOM & WC people.
>
> Now that I found the Rotary table I was looking for I am looking for the
> Thin-Stock follower and
>> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
>> *Sent:* Thursday, 21 March 2019 12:39 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Prices on thin stock follower,thin stock support and
>> vertical Bench vise
>
near Drive Motor if not too expensive
>>
>>
>>
>> Bill
>>
>>
>>
>> From: legacy-ornamental-mills@googlegroups.com
>> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
>> Sent: Thursday, 21 March 2019 12:
Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via
: Re: Prices on thin stock follower,thin stock support and vertical
Bench vise
I'll let him know Ryan. If not these can still be ordered from LOM too
On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer wrote:
I’d be interested in a 2x multiplier gear set. - Ryan
Sent from my iPhone
On Mar
Curt George' via Legacy Ornamental Mills
wrote:
Hello TimThis is what I found.I hope it helps?
C.A.G.
Thin Stock Support
(part no. LTHINSTK)
$99.00
|
Projects
featuring the
Vertical Vise:
- Table
| Home > Products > Mill Accessories > Vertical ViseCart : 1 items -
;> Hello Tim
>> This is what I found.
>> I hope it helps?
>>
>> C.A.G.
>>
>>
>>
>> Thin Stock Support
>>
>> (part no. LTHINSTK)
>>
>>
>>
>> $99.00
>>
>>
>>
>> Project
> wrote:
> Hello Tim
> This is what I found.
> I hope it helps?
>
> C.A.G.
>
>
>
> Thin Stock Support
> (part no. LTHINSTK)
>
>
> [image: Thin Stock Support]
>
> *$99.00* [image: Add To Cart]
> <https://web.archive.org/we
Hello TimThis is what I found.I hope it helps?
C.A.G.
Thin Stock Support
(part no. LTHINSTK)
$99.00
|
Projects
featuring the
Vertical Vise:
- Table
| Home > Products > Mill Accessories > Vertical ViseCart : 1 items - $89.00
View
|
Vertical Vise
(part no. LV
stock follower
2. Thin Stock Support
3. Vertical Bench Vise
Kind regards,
Tim of ZWW
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
Good morning fellow LOM & WC people.
Now that I found the Rotary table I was looking for I am looking for the
Thin-Stock follower and Thin Stock Support.
I know selling parts from units is not always easy but I bought my LOM 1200
to further my business opportunities and need to move for
Curt:
I saw a bit I thank on U tube regarding this problem. I will try to find
it again. anyway the gentlemen made a holder like the one Tim is writing
about.
Differance being the holder is mounted to the front of the router table.
About 2 or 3 from the bit. It moves with the table so no
out latter.
Have a good night all.
C.A.G.
- Original Message -
From: Gene
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Sunday, December 02, 2012 8:17 PM
Subject: Re: Thin Stock Support
Curt:
I saw a bit I thank on U
@googlegroups.com
Sent: Sunday, December 02, 2012 8:17 PM
Subject: Re: Thin Stock Support
Curt:
I saw a bit I thank on U tube regarding this problem. I will try to
find it again. anyway the gentlemen made a holder like the one Tim is
writing about.
Differance being the holder is mounted
-Ornamental-Mills@googlegroups.com
Sent: Wednesday, October 17, 2012 11:30 PM
Subject: Thin Stock Support
I saw this tonight over on Legacy's cnc forum from Dan1931. He said it was
ok to share this idea with others
looks good to me can you post a bigger clearer pic or is that the bes one there
is
Bill B
- Original Message -
From: Tim Krause
To: Legacy-Ornamental-Mills@googlegroups.com
Sent: Thursday, October 18, 2012 2:30 PM
Subject: Thin Stock Support
I saw this tonight over
That plastic is really common. Cutting boards are made out of the same
material. You are correct on your assumption.
-Tim
--
Thank You
On 2012-10-18, at 8:22 PM, Tim Krause artmarb...@comcast.net wrote:
That plastic is really common. Cutting boards are made out of the same
material. You are correct on your assumption.
-Tim
--
--
Bill's mobility kit!) ;-)
Awesome job Bill.
thanks for sharing.
C.A.G.
- Original Message -
From: Bill Bulkeley bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, June 30, 2011 2:40 AM
Subject: Re: thin stock support
I just made this I havent even
all the brackets are legacy's all I bought and added was the wheels and 2
bolts
Bill
- Original Message -
From: curt george curtgeo...@wowway.com
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, June 30, 2011 10:13 PM
Subject: Re: thin stock support
Very Nice Bill
Where
Did you buy them or did they come with you machine? I don't have any that
look like that and defiantly no extras that look like it.
Thanks
Greg
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To post to this group, send email to
: Bill Bulkeley bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, June 30, 2011 12:40 PM
Subject: Re: thin stock support
the 90 degree brackets I ordered from legacy they were used on a older
model machine the 200 I believe it was. and the strait brackets are from
knowing legacy as i do good luck
Bill
- Original Message -
From: curt george curtgeo...@wowway.com
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, July 01, 2011 4:16 AM
Subject: Re: thin stock support
Hello Bill
in my manual it states that I can up-grade my machine
: Re: thin stock support
Thanks Tim
Those brackets are the real trick to making this stock support work.(Not
trying to take anything away from you Bill, Great job on this one.) But
Having those two little tangs hold the brackets in place with only one
mounting screw to mount it on the Legacy
-
From: Bill Bulkeley bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, June 30, 2011 7:30 PM
Subject: Re: thin stock support
if legacy doesn't make them any more then maybe Tim can or similar. sounds
like a few out there might like some
what do you think
55 matches
Mail list logo