Hi All
Sorted out , Thanks to all, Ursula and Mark's steps sorted us out, the
default route kept been dropped out.
Regards
Gerard Ceruti
may the 'z' be with you
SharePoint (internal)
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Mark Post
Hi All
We are in a similar situation as David, we were defining a new OSA with
layer2 support for CCL and have clobbered the network definitions for
normal access.
When I try ifup or ifdown the interfaces I get a message Network
interface is managed from NetworkManager etc etc as I am unable to
AM, Ceruti, Gerard G
gerard.cer...@standardbank.co.za wrote:
Hi All
We are in a similar situation as David, we were defining a new OSA with
layer2 support for CCL and have clobbered the network definitions for
normal access.
When I try ifup or ifdown the interfaces I get a message Network
HI All
Anyone got a presentation or document that covers the creation of
Hipersockets using YAST ?,
We have done it via command line but for completeness would like to cove
the YAST option as well.
Gerard Ceruti | Technical Specialist |Mainframe Systems | Standard Bank
South Africa |Riverclub
/2009 at 7:50 AM, Ceruti, Gerard G
gerard.cer...@standardbank.co.za
wrote:
HI All
Anyone got a presentation or document that covers the creation of
Hipersockets using YAST ?,
We have done it via command line but for completeness would like to
cove
the YAST option as well.
yast - Network
Hi Michael
Excellent question, I was just about to post the same, we also just have
Linux LPAR's, no z/VM.
The question of DR for the LPAR has been on my mind the last couple of
days, I was going to ask if there was some way to support a VIPA IP
address in LPAR,
The other challenge is going to be
Hi Martin
This is how I have done all my installs, initial boot off the HMC CD, then
point to an NFS server ( SuSE PC) I have not been unable to get FTP work, but
NFS works great,
check the NFS exports are all defined correctly,
Have you checked /var/log/messages on the PC for any error
Hi All
Has anyone looked at the IBM Open Source Consolidation Package -
WebSphere Application Server Community Edition for Linux on System z ?.
We have no specific requirement just yet, but I would like to get some
of the distributed WAS applications moved across, I have not been
through all the
Hi
Anyone from Bank of New Zealand or Red Hat on the list who can share the
experience ?.
http://customers.press.redhat.com/category/geography/apac/
Regards
Gerard Ceruti
may the 'z' be with you
Hi All
Does anyone collect the System emails generated by Linux images in a
central location, currently I invoke the mail command on each image
but I would like to look in one location,
This location could be a pc or a System z Linux image. Any ideas.
Regards
Gerard Ceruti
may the 'z' be with
Hi All
What affect does HiperDespatch have on native LPARS running Linux and
then LPAR's running z/VM with Linux guests.
Regards
Gerard Ceruti
may the 'z' be with you
Hi all
If I have a z10 LPAR running z/VM on IFl's only and I want to start a
z/OS system to run DB2 , do a need a General purpose CP ?.
Regards
Gerard Ceruti
may the 'z' be with you
Hi All
When defining the QDIO CHPID in HCD is there any issue with defining a
Frame Size of 64K ?, if we leave our MTU at 8K other than the some
storage wastage are there any other issues we need to be aware of
Regards
Gerard Ceruti
may the 'z' be with you
To: LINUX-390@VM.MARIST.EDU
Subject: Re: hipersocket
Ceruti, Gerard G wrote:
Hi All
When defining the QDIO CHPID in HCD is there any issue with defining a
Frame Size of 64K ?, if we leave our MTU at 8K other than the some
storage wastage are there any other issues we need to be aware
Hi All
Anyone know what is causing these messages to be generated and where I
can find doco to trace it down ?.
zlnx02:/home/ptc3 # tail /var/log/messages
Sep 8 08:33:11 zlnx02 kernel: s390_do_machine_check : done
Sep 8 08:33:11 zlnx02 kernel:
Sep 8 08:33:11 zlnx02 kernel: mach_handler :
: Re: s390_do_machine_check
Ceruti, Gerard G wrote:
Hi All
Anyone know what is causing these messages to be generated and where I
can find doco to trace it down ?.
Did you read any of these?
http://www.google.com/search?q=s390_do_machine_checkstart=0start=0ie=utf-8oe=utf-8client=mozillarls
Hi All
Does anyone know what is happening in the background when doing a LPAR
install of Sles10 and you are in the DASD DISK Management screen ,
selected the DASD you want to use, selected the 'perform Action' of
'Activate', why it takes so long to come back ?.
Regards
Gerard Ceruti
may the 'z'
Hi All
Our current disk layout has specific mount points with MOD 9's behind ,
we now need more space on one specific mount point,
Is it possible to turn this mount point into a LVM configuration without
moving the data off ?.
Looking at the doco , the current plan would be to move all the data
Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark Perry
Sent: 08 July 2008 04:08 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Convert existing mount point to LVM
Ceruti, Gerard G wrote:
Hi All
Our current disk layout has specific mount points with MOD 9's behind ,
we now need more space on one
Hi All
Where the best place to find these kernel messages :
Jun 22 03:22:17 zlnx01 kernel: rsc=3, anc=1, erc=8, rsid=B20B
Jun 22 03:22:17 zlnx01 kernel: crw_info : CRW reports slct=0, oflw=0,
chn=0, rsc=3, anc=1, erc=8, rsid=B20C
Jun 22 03:22:17 zlnx01 kernel: crw_info : CRW reports slct=0,
Thanks Peter
Would cio_ignore help towards eliminating this ?.
Regards
Gerard Ceruti
may the 'z' be with you
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Peter 1 Oberparleiter
Sent: 23 June 2008 10:27 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re:
Hi All
SLeS 10 sp1, reiserfs, Disk Mod27's .Tried to do some testing of a Linux
LPAR this weekend, moved a Linux LPAR into another LPAR with more
capacity, CPU's + Memory, the systems took a long time to load last msg
on the HMC was Loading Reiserfs, after + - 45 mins the systems came
up, I have
Hi All
I have just completed the first RHEL 5 install, does RHEL have the same
as SuSE's yast ?, look in the net there seems to be a control-center
is this correct ?.
Regards
Gerard Ceruti
may the 'z' be with you
Hi all
I had a problem with one of the Linux Lpar's, it looked like something
was looping, I could only get into the HMC's console, saw the system
was hosed,
Did not write down the message number/format etc, thinking I could check
the log after the system was back up.
System back up and I check
Hi all
Is everyone aware of the no cost CCL workshop ?
Regards
Gerard Ceruti
may the 'z' be with you
Internet URL to view this announcement:
https://www-927.ibm.com/software/productintro/1/0973310F95C4D789852573EE
00400D80
[mailto:[EMAIL PROTECTED] On Behalf Of
Justin Payne
Sent: 29 February 2008 06:44 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: RHEL 5 LPAR install
Ceruti, Gerard G wrote:
Hi Justin
I am still at stage one, the initial parm defn's after loading off the
cd, where you define the name, IP addr, GW addr
Hi all
Does anyone know how to cut and paste the messages from the HMC console.
I am trying to get the install started but I am making a mistake with
the network configuration somewhere,
As the eth0 interface is not coming up.
Has anyone perhaps had a similar problem and also Can point me to
command to
see them). They might give you a hint as to what's wrong with the eth0
interface.
Good luck.
Ceruti, Gerard G wrote:
Hi all
Does anyone know how to cut and paste the messages from the HMC
console.
I am trying to get the install started but I am making a mistake with
the network
Payne
Sent: 29 February 2008 06:35 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: RHEL 5 LPAR install
I assume you are able to get a shell in the installer. If so, the
install log is located in /tmp/anaconda.log and can be opened with vi.
~Justin Payne
Ceruti, Gerard G wrote:
Thanks Dave
Hi Peter
The remark to Mark was perhaps to quick off the keyboard , as one big
issue I am having at the moment in motivating the possible migration of
applications to zSeries Linux is the amount required and then the cost
of zSeries memory.
The last calculation we did the license saving's was
specific you want to know?
Best regards,
Pieter Harder
[EMAIL PROTECTED]
tel +31-73-6837133 / +31-6-47272537
Ceruti, Gerard G [EMAIL PROTECTED] 02/05/08 8:45
Hi All
Anyone who is running SAP Application servers under zSeries Linux, bare
metal or zVM that could share some information,
SAP
, 2008 at 2:45 AM, in message
[EMAIL PROTECTED]
.com,
Ceruti, Gerard G [EMAIL PROTECTED] wrote:
Hi All
Anyone who is running SAP Application servers under zSeries Linux,
bare
metal or zVM that could share some information,
SAP kernel 700,710 would be ok, in particular the memory
Hi All
Anyone who is running SAP Application servers under zSeries Linux, bare metal
or zVM that could share some information,
SAP kernel 700,710 would be ok, in particular the memory requirements is of
interest to us.
Regards
Gerard Ceruti
may the 'z' be with you
Hi All
I am trying to install Ingres on SLES 10 and keep getting a message when
running the install script
System user ingres must be created before the installation can
proceed
I have created a user via YAST called 'ingres' but still get the same
message.
Looking at the install.sh all that is
Hi All
I am having some difficulty in getting some one from our neck off the
woods to confirm all the possible license costs for SUSE on zSeries.
My take is that there are 2 sets of cost,
1: the SLES software itself, i.e. the DVD with the software on it, is
this a once off cost, or a per CPU
@VM.MARIST.EDU
Subject: Re: Suse disk missing
try
http://download.boulder.ibm.com/ibmdl/pub/software/dw/linux390/docu/l26cdd03.pdf
David
-Original Message-
From: Linux on 390 Port on behalf of Ceruti, Gerard G
Sent: Wed 9/26/2007 12:59 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Suse disk missing
, theory and practice are the same, but
in practice, theory and practice are different.
On 10/1/07 11:05 AM, Ceruti, Gerard G [EMAIL PROTECTED]
wrote:
Hi Again
I have finally got the Disk back online to the Linux Lpar but when I reload I
get the same messages, I can manually bring
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark Post
Sent: 27 September 2007 02:38 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Suse disk missing
On Wed, Sep 26, 2007 at 12:59 PM, in message
[EMAIL PROTECTED]
com, Ceruti, Gerard G [EMAIL PROTECTED
George
Why not start here :
http://www.zseriesoraclesig.org
Special Interest Group of Oracle users on the mainframe (z/OS and Linux)
Regards
Gerard Ceruti
may the 'z' be with you
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
George Wallace
Sent: 27
Hi All
I am having a similar time to Martha with:
/sbin/fsck.ext3 (1) -- /data1Ù fsck.ext3 -a /dev/dasdc1
fsck.ext3: No such device or address while trying to open /dev/dasdc1
Possibly non-existent or swap device?
fsck.ext3 /dev/dasdc1 failed (status 0x8). Run manually!
The systems is SUSE
Hi Larry
The best move I made when starting down this road was to get a old PC and
install Linux on it and use it a an FTP/NFS server and as a general learning
box.
I also found the Redbooks and Mike MacIssac scripts very helful.
Regards
Gerard Ceruti
-Original Message-
From:
Hi anyone running CTG under Linux,
with or without z/VM. I have been tasked to look at the option, actually
I talked my way into looking at the option, I would like to ensure I
have all the bases covered, currently we run CTG under z/OS and need to
upgrade to V7.
Regards
Gerard Ceruti
Subject: Re: Cics Transaction Gateway
Was there a question? Check the zJournal archive, I wrote an article
about CTG on Linux for zSeries some time ago.
Ceruti, Gerard G wrote:
Hi anyone running CTG under Linux,
with or without z/VM. I have been tasked to look at the option,
actually
I talked
Hi All
I have been following the discussion on consolidating Oracle on zSeries
Linux to exploit z/VM to achieve some license saving, we are in the
process of doing a paper exercise to see what our numbers would be, this
morning a question was asked What about DB2 UDB ? as the license
model is
Kevin
In our case SUSE was prepared to let us have a look at the software for
6 months for the POC and RH only 30 days before they wanted money.
Regards
Gerard Ceruti
HI James
I have just completed a SLES9-SP3 install into an LPAR , using Mike
Macissac's script and Redbook LPAR to Virtual server , so if they want
to chat lets do so.
Regards
Gerard
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
James Melin
Sent: 22
Hi All
I am in the process of setting up the install tree as per Mike's shell
(thanks Mike) but had a small snag in that the SP3 ISO's where not been
picked up , the script needs to be updated with the done in line 70
moved to line 82.
Regards
Gerard
Hi Folks
Has anyone made the move ?, or considered it and then moved to another
platform ?.
Regards
Gerard
__
Standard Bank Disclaimer and Confidentiality Note
This
copied from IBM-MAIN
Anyone know about this ??
Regards
Gerard
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of John S. Giltner, Jr.
Sent: 05 January 2006 05:04 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: z/Linux to p/Linux
John R. Grout wrote:
To: LINUX-390@VM.MARIST.EDU
Subject: Re: FW: z/Linux to p/Linux
On Thursday, 01/05/2006 at 01:15 ZE2, Ceruti, Gerard G
[EMAIL PROTECTED] wrote:
copied from IBM-MAIN
Anyone know about this ??
Know about what, Gerard? The post asserts no facts, containing only
speculation about IBM marketing strategies
Scott
The HMC with a Z9 is Linux
Festive Greetings
Gerard Ceruti
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Ledbetter, Scott E
Sent: 23 December 2005 06:37 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: OS/2 RIP
Does anyone know if the HMC on a Z9
Hi Folks
I am busy with a SLES9 install but am hitting a problem with
the /var/log/YaST2/y2log ( RAM disk) running out of space.
I am sure this is been caused by the number of disks the install process
is seeing at install time, the disk I am using are spread in the server
frame.
Questions:
-Can
@VM.MARIST.EDU
Subject: Re: Websphere
Gerard,
Those are for Intel only, and he's looking for mainframe Linux versions.
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of Ceruti,
Gerard G
Sent: Thursday, November 24, 2005 3:22 AM
To: LINUX-390@VM.MARIST.EDU
Steve
Have you had alook at ibm.com/developerworks/offers/sek ?.
Gerard
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
zSeries Linux
Sent: 23 November 2005 08:53 PM
To: LINUX-390@VM.MARIST.EDU
Subject: FW: Websphere
Hi Jim
I went thru the same problem and the found
http://www.pexus.com/Download/downloadFiles.html X/Deep 32 freeware
Regards
Gerard
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Gregg,
Jim
Sent: 18 May 2005 03:27 PM
To: LINUX-390@VM.MARIST.EDU
Hi Folks
We have a small SuSE Lpar that is about to go live and I need to complete a
DRP setup, we have a GDPS/XRC solution already in place and I was thinking
to do a Sync and Drop process on the Linux volumes , the LPAR would remain
up during this process. Has anyone else already looked at this
disk is a problem with another sandbox box install.
Regards
Gerard
-Original Message-
From: Ranga Nathan [mailto:[EMAIL PROTECTED]
Sent: 20 April 2005 06:14 PM
To: Ceruti, Gerard G
Cc: LINUX-390@VM.MARIST.EDU
Subject: Re: FW: SuSE 8 Installation problem on z800
Gerard:
I dont remember
Hi Folks
I have a huge amount of documents in PDF format (zSeries Linux related) that
I need to make available for reference,
I am hoping to find a solution (Linux would be nice) that would scan/present
the first page of each of the PDF's,
The only other option I have available at the moment is
Hi Folks
Anyone installed Tivoli management Framework v4.1.1 onto SuSE 8 ?, we are
having a problem getting the install started.
./wserver: line 182: /doco/Tmf4.1.1/CD1/bin/linux-s390/wserver_cli: No such
file or directory
zlnx01:/doco/Tmf4.1.1/CD1 # cd bin/linux-s390/
Hi Folks
We have been relooking at file transfers options available , MVS to Unix to
MVS,
SSH has come up again and I need to confirm that:
1:- the Ported Tools SSH on zOS transfer is not MVS dsn aware ,
2:- is this also valid for SSH on Linux on zSeries (SuSE) ?.
Any idea if option 1 will
Hi
Is it possible to write a new volser to a pack with the system up and
running ?
Regards
Gerard
Current info:
zlnx01:/ # dasdview -b 2b -s 128 -f /dev/dasda
++--+---
---+
| HEXADECIMAL| EBCDIC
Test
__
For information about the Standard Bank group visit our web site
www.standardbank.co.za
Hi People
For the CA Top Secret users out there , has anyone got the CA TSS-PAM client
for Linux to work on a non mainframe Linux implementation ?.
Thanks
Gerard
__
Thanks Jim
-Original Message-
From: Jim Knox [mailto:[EMAIL PROTECTED]
Sent: 28 June 2004 05:16 PM
To: [EMAIL PROTECTED]
Subject: Re: Cics an Linux
Today I was asked if CICS is available on zSeries Linux ?, from what I
can
find out - NO and I am sure it will not happen very quickly,
Hi People
Today I was asked if CICS is available on zSeries Linux ?, from what I can
find out - NO and I am sure it will not happen very quickly, does anyone
perhaps know other ?.
Thanks
Gerard Ceruti
Hi People
Has anyone done a LPAR install on zSeries and then migrated to a zVM
infrastructure ?, any ideas on this ?.
I would look at the LPAR install just so that we get a head start on the
project , the zVM is part of the IBM bundle that will come a little later in
the project.
Best regards
Gerard
-Original Message-
From: Rob van der Heij [mailto:[EMAIL PROTECTED]
Sent: 26 May 2004 01:35 PM
To: [EMAIL PROTECTED]
Subject: Re: Initial LPAR install zSeries
Ceruti, Gerard G wrote:
Hi People
Has anyone done a LPAR install on zSeries and then migrated to a zVM
infrastructure
Hi People
Perhaps someone can comment ,(assume for the discussion that the business
application requires only ONE CP)
We are looking at a zSeries Linux production setup and the discussion of how
many CP are required has come up, normal rules say we should get another CP
to handle possible
Hi All
Please excuse the dumb question,
Is there doco on how to install the developerworks code, I am waiting for
the powers that be to approve a POC, but I would like to get started with
some self education before.
Thanks
Gerard Ceruti
-Original Message-
From: Gerhard Hiller
]
Subject: Re: 2004-03-30 Recommended Linux for zSeries code drop to develop
erWorks
Ceruti, Gerard G wrote:
Hi All
Please excuse the dumb question,
Is there doco on how to install the developerworks code, I am waiting
for the powers that be to approve a POC, but I would like to get
started with some
Hi People
Is there someone from RedHat out there I need to get a price on the RHEL-3
'try before you buy' offer,
I need to add some number to a motivation,
I have tried via the website and also trying to track down a local agent
(South Africa) but thus far no joy.
Regards
Gerard Ceruti
Hi People
Is anyone aware of rebuttals to the doco on
http://www.microsoft.com/mscorp/facts/default.asp ?
Regards
Gerard Ceruti
__
For information about the
,
or not having the correct parameters for them.
I would say that you are indeed looking at IPLing a rescue system to fix
this.
Mark Post
-Original Message-
From: Ceruti, Gerard G [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 27, 2003 7:36 AM
To: [EMAIL PROTECTED]
Subject: Boot problem
Hi
Phil
Here is the response I got from Suse on that question:
After you have downloaded the CD image there are two possibilities to make
it available to the system that needs to be updated:
* write it to a CD-R, mount the CD on a work station (for example
running Linux, Windows or a
Hi People
We have just reloaded our Linux LPAR image and have encountered the
following problem:
kmod: failed to exec /sbin/modprobe -s -k block-major-94, errno = 2
VFS: Cannot open root device dasda2 or 5e:02
Please append a correct root= boot option
Kernel panic: VFS: Unable to mount root fs
Other than downloading all the files individually is there another way to
get SP3 ?.
Regards
Gerard
-Original Message-
From: Hall, Ken (IDS ECCS) [mailto:[EMAIL PROTECTED]
Sent: 18 November 2003 04:22 PM
To: [EMAIL PROTECTED]
Subject: SuSE SLES8 SP3 ISO images
For those of you with
a maintenance contract.
If you DO have a contract, the links to the ISO images are just a little bit
down the page, just under Indications.
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of
Ceruti, Gerard G
Sent: Thursday, November 20, 2003 7:57 AM
To: [EMAIL
Our problem seems to be related to the physical dasd , call opened with the
supplier .
Thanks to all
If you are starting out and need doco ( as I have just gone thru )
get
http://sdb.suse.de/download/s390x/update/SuSE-SLES/8/images/sles-admin-zseri
es_en.pdf
the document is what I needed a week
Mark
I cannot find the yast command , the system that I up and running is the
system off the CD that I think is loaded purely into memory.
Here is the sequence:
Boot off CD
SSH into linux system to format disk :
Last login: Mon Sep 1 13:16:58 2003 from 10.98.246.95
SuSE Linux Enterprise
Hi Listners
Perhaps you are able to point me in the right direction ,
we are installing Suse8 in LPAR mode , I have got the load off the CD
and am able to telnet to Linux,
my problem is now how do I format the disks'
I have done the 'insmod dasd_mode dasd=***,***' command
but when I do a cat of
/fstab
/dev/dasdc1 /opt ext3 defaults 1 2
[]'s,
Anttnio.
Ceruti, Gerard G wrote:
Hi Listners
Perhaps you are able to point me in the right direction ,
we are installing Suse8 in LPAR mode , I have got the load off the CD
and am able to telnet to Linux,
my problem is now how do I
Hi Daniel
It might have been ctrl+alt+f4 , the reboot resolved the problem , are you
aware where all these shortcuts are documented ?.
Gerard
-Original Message-
From: Daniel Jarboe [mailto:[EMAIL PROTECTED]
Sent: 05 August, 2003 13:57
To: [EMAIL PROTECTED]
Subject: Re: SuSE and shortcut
Hi List
I have tried SuSE's site and Google , does anyone have a list if the short
cut keys ?,
yesterday I went from KDE to a (what looked like a ) telnet session , I
think by pushing
Ctrl+Shift+F4 , needless to day I could not find my way back to KDE with a
reboot .
Thanks
Gerard Ceruti
]
Subject: Re: SuSE and shortcut keys
Gerard,
man 4 console talks about this.
Mark Post
-Original Message-
From: Ceruti, Gerard G [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 05, 2003 6:36 AM
To: [EMAIL PROTECTED]
Subject: SuSE and shortcut keys
Hi List
I have tried SuSE's site
Thanks all , I will chat to the Capman and see what the plan might be.
regards
Gerard
-Original Message-
From: John Summerfield [mailto:[EMAIL PROTECTED]
Sent: 22 July, 2003 17:50
To: [EMAIL PROTECTED]
Subject: Re: Linux and VSAM
On Tue, 22 Jul 2003, Ceruti, Gerard G wrote:
Hi All
I
Hi All
I have tried to do a search thru the logs but I am unable to get a result, I
got a question from our Capman guy, is/are there software/plans to let Linux
access VSAM files , perhaps via NFS or natively, as our current zOS systems
all in a Sysplex I would like to leave that alone for the
Thanks to all who replied
What I have asked for is a laptop with 2 HDD's one for the business and one
for Linux , this I can then manage via a boot manager, I will have to wait
and see what gets authorised .
Thanks
Gerard
Hi to all
We are looking to start a Proof of Concept (POC) of Linux on zSeries very
soon , to aid my learning curve I want to install a Linux partition on my
laptop, are there any ideas as to what distribution I should install , or
does it not make any difference .
For the sake if discussion ,
Hi all people
I am getting the feet wet by doing an install on a PC before tackling the
install on a zSeries box, all has gone well but one question has come up ,
I have downloaded all the maintenance rpm's into a directory and I now
want to apply it all , but the tool I found kpackage only
Hi People
Slightly off topic , what software is the for website creation under Linux (
ala FrontPage) ?.
Thanks
Gerard
__
Disclaimer and confidentiality note
Everything in this e-mail and any attachments relating to the official business of
Thanks Phil , Colin , Quanta is it.
Regards
Gerard
-Original Message-
From: Colin Walls [mailto:[EMAIL PROTECTED]]
Sent: 09 January 2003 02:52
To: [EMAIL PROTECTED]
Subject: Re: OT- Website creation Software
Slightly off topic , what software is the for website
creation under Linux (
91 matches
Mail list logo
