).
For monitoring the storage definitions we use Velocity to report on the
disk.
Craig Collins
State of WI, DOA, DET
On Thu, Jul 14, 2011 at 1:27 PM, Ron Wells ron.we...@slfs.com wrote:
sure would
From: Rick Troth r...@casita.net
To: LINUX-390@VM.MARIST.EDU
Date: 07/14/2011 01:18 PM
Thank you everyone for your confirmation and instructions. It threw off our
Linux Support person when YaSt wouldn't keep the LVM option on the disk as
he was doing the install. Following the suggestions we were able to
configure it and it is working now.
Craig Collins
State of WI, DOA, DET
on these types
of devices.
Craig Collins
State of WI, DOA, DET
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin
need to
sign into the server on the ip address listed in the install parameters
using the userid and password listed in the parameters. Once in, you will
need to mount the server's disk in order to do any updates. Shut it down
and reboot when done.
Craig Collins
State of WI, DOA, DET
On Wed, Jun 1
. The zSeries channels can be used for native FC or FICON
connections. If you want to use NPIV, which I highly recommend, then you
need to set the NPIV on for each LPAR where you are using it through the HMC
with the channel offline to all LPARs.
Craig Collins
State of WI, DOA, DET
On Thu, May 12, 2011 at 7
devices for boot/root/swap and linux server
managed FBA/SCSI for data LUNs, but continue to think about moving it all to
EDEV FBA definitions.
Craig Collins
State of WI
On Fri, Mar 11, 2011 at 12:00 PM, Christian Paro
christian.p...@gmail.comwrote:
A full set of benchmarks for different disk
.
We decided the best alternative for us was to move it off of zSeries, that
it wasn't the best fit for z/Linux.
On Tue, Mar 8, 2011 at 7:17 PM, Alan Altmark alan_altm...@us.ibm.comwrote:
On Tuesday, 03/08/2011 at 08:51 EST, Craig Collins grizl...@gmail.com
wrote:
We were using zLinux to host
the memory allocations and even after going through all of the DB2
performance tuning parameters for TSM 6.1, we could no longer justify the
additional memory cost as compared to stand alone servers for TSM 6.1 so we
have moved TSM off of zLinux.
Craig Collins
State of WI
On Thu, Mar 3, 2011 at 2
We created the golden image server on EDEV FBA disk as well so our clone is
from EDEV FBA to EDEV FBA. I presume if we are using the CMS FORMAT/RESERVE
sequence we should do so for the source golden image build as well as the
clone system before copying. When we tried using dd to clone, I
1. rebuilt the golden image, preparing the disk with CMS FORMAT RESERVE on
EDEV FBA mini-disks
2. prepared the clone system disk with CMS FORMAT RESERVE on EDEV FBA
mini-disks
3. Altered the clonerw.sh script so that it recognized the disk as FBA
instead of CKD to get the device names and
the script does have the sync command executing after the copy with dd
completes
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
FYI - the problem we were having with the boot.findself script had to do
with upper/lower case matching issues when the script interrogated the
sles11 parameter files searching for the source and destination server names
and ip addresses. So, the script worked fine once we matched the cases to
locally. We think that's more likely the scenario
we would want to go with, but we are walking through the above named
document to get familiar with that method as a possibility.
Craig Collins
State of WI, DOA, DET
--
For LINUX-390
to format the SWAPGEN created disk and that is causing the install
process to abend.
Thanks,
Craig Collins
State of WI
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu
instance? If so, are there any
settings you needed to change to get to that performance level? Or is there
a maximum of around 1 Gb that a single server instance can achieve? We're
grasping at straws at this point. Any ideas are appreciated.
Craig Collins
State of WI, DOA, DET
for the info and the quick responses.
Craig Collins
State of WI, DOA, DET
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http
remaining to read
2009-04-14 08:14:12 5 ZVMTST21(2784) [zypp] Exception.cc(log):133
We'll see what turns up.
Craig Collins
State of WI
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists
suggestions?
Craig Collins
State of Wisconsin
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex
. Maybe our copy is
incomplete/corrupt.
Craig Collins
State of WIsconsin
On Mon, Apr 13, 2009 at 11:29 AM, Mark Post mp...@novell.com wrote:
On 4/13/2009 at 11:30 AM, Mark Pace mpac...@gmail.com wrote:
They have changed the format of the install paramters.
I don't believe so.
Use
Install
We downloaded the media again and re-deployed it on the ftp server, but we
still received the media failure error. Any ideas?
On Mon, Apr 13, 2009 at 12:09 PM, Craig Collins grizl...@gmail.com wrote:
Actually, specifying the userid password as part of the ftp specification
got us past
Yes, we've cloned FCP-only NPIV SLES 10 zLinux systems and have a set of
procedures we've written to do so. They are a little raw but I would be
willing to share them with you. Drop me a direct email if you want a copy.
Craig Collins
State of WI, DOA, DET
craig.coll...@wi.gov
On Fri, Oct 24
from golden image LUN to clone image LUN, we can work through the rest of
the script to make the necessary alterations to the guest. We're trying to
stay away from subsystem provided flashcopy type functions due to licensing
costs.
Craig Collins
State of WI
.
On Tue, Jul 1, 2008 at 11:33 AM, Mark Post [EMAIL PROTECTED] wrote:
On Tue, Jul 1, 2008 at 10:05 AM, in message
[EMAIL PROTECTED], Craig
Collins
[EMAIL PROTECTED] wrote:
We tried the cms console command and the tried setting up our fstab and
zipl.conf using the by-uuid definitions and still
this and knows all of the
configuration items we need to update to make this work, we would appreciate
the information so we don't have to reinvent the wheel. If not, we'll keep
working through this and share what we figure out with the list if anyone is
interested.
Craig Collins
State of WI
they
remembered doing it gave us renewed energy to work through it again. Thank
You for the help. We can now put some more old storage to use.
Craig Collins
State of WI
On Feb 6, 2008 3:08 PM, Jerry Whitteridge [EMAIL PROTECTED]
wrote:
The Clarion requires you to have accessed the storage subsystem
Sorry, should have written . . . since yast would not complete the define
since the LUN was not provisioned on the storage.
On Feb 8, 2008 11:25 AM, Craig Collins [EMAIL PROTECTED] wrote:
We did get it to work. Not exactly with the steps listed since yast would
not complete the define since
validate it is an option
which should be considered. Thanks in advance for any information.
Craig Collins
State of WI
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message
connection, as if the NPIV id was not logged into the switch.
So, are you using NPIV with the connections to the EMC Clariion and if so,
do you have any other tips from your experience that might help us get this
to work?
Craig Collins
State of WI
On Feb 1, 2008 2:35 PM, Jerry Whitteridge [EMAIL PROTECTED
should look at?
Craig Collins
State of Wisconsin
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex
did not
need to be in the zone definition if only the local switch was used.
Craig Collins
State of Wisconsin
On 9/6/07, Craig Collins [EMAIL PROTECTED] wrote:
We're running into a configuration issue trying to get NPIV FCP
connections to work through a switched fabric distributed across two
30 matches
Mail list logo
