I ran this command.
journalctl -b -p err | grep systemd-modules-load
Aug 08 11:20:56 xxx systemd-modules-loadم75ل: Failed to
find module 'prng'
On Thu, 8 Aug 2024, 09:50 Peter, wrote:
> Hello GROUP
>
> When I intialially moved the zLinux server from 1 site to ano
older site by replicating the LUN
then the Linux is failing with kernel module failed
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
Wed, Aug 7, 2024 at 9:40 PM Peter wrote:
> hello Sam,
>
> Thank you so much
>
> Can I alter the zfcp value in Production and copy to DR. then boot up the
> linux from DR and will it fix this issue.
>
> the WWPN for the Production and DR are different. so while IBM repli
Hello,
I was trying to bring up the DRed Linux redhat but it failed with kernel
crash as below. The linux guest is using the SCSI device. Not sure if the
Copying from Production to DR was missing on something ? But i was getting
emergency linux logon that means the copying was good but it is corru
IBM Z and LinuxONE installations.
- Generates installer parameter files for the latest RHEL and SLES Linux
distributions.
- Supports OSA and PCI networking devices, IPv4/v6, and VLAN
installations.
Access the assistant through the following link:
https://ibm.github.io/liz/
--
Peter
ng steps:
1. Set reader device online (assuming default reader device number 000c)
$ chzdev -ea 0.0.000c
2. Force a ready-state transition using z/VM's READY CP command
$ vmcp ready 000c
==
Regards,
Peter
[1] http://www2.marist.edu/htbin/wlvtype?LINUX-VM.97664
[2] https://lists.openma
Hello
Is there any documentation and steps to configure Dump-on-panic steps for
Linux guest ?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO
Hello
Good evening
I am looking for the steps to add more storage using SCSI LUN ID to our
Linux guest
Is it just the existing LUN ID needs expansion or a new LUN ID needs to
added? We have LVMs
Peter
--
For LINUX-390
Hello
Can someone help me with the procedure or step to set up the console for
the Linux guest ?
I was following up the CMS planning guide to set up PROP but followed the
Initial step to link 692 disk but that disk is not found
Any help is much appreciated
Peter
Hello
We are still at 7.5
Linux IP is reachable now from SSH but I can still I can see the below error
م17.169442 ل IPv6: ADDRCONF(NETDEV_UP): enccw0.0.0640: link is not ready
On Mon, Aug 8, 2022, 11:45 AM Dan Horák wrote:
> Hello Peter,
>
> looks to me you are using "enccw0.
Status: OFFVEPA Status:
OFF
Uplink
Port:
State: Defined
PMTUD setting: EXTERNAL PMTUD value: 65535Trace Pages: 8
Ready; T=0.01/0.01 22:15:32
On Sun, Aug 7, 2022 at 8:44 PM Peter wrote:
> Hello,
>
> I have replicated all the LUN ID of my Redhat Linux image
need to be looking at ?
Redhat : 8.2
Regards,
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbi
On 04.07.2022 06:13, Jake Anderson wrote:
> Is it possible to know the LUN ID where a specific filesystem is residing?
You can use 'lszdev --by-path ' to display information about the
device that provides a specific filesystem path.
Regards,
Peter
--
Peter Oberparleiter
L
Is it possible to edit the /etc files from 3270 emulator? As I don't have
access to the SSH yet as network service is not up
On Thu, Jun 30, 2022, 2:18 PM Steffen Maier wrote:
> Hi Peter,
>
> On 6/30/22 11:36, Peter wrote:
> > Still the zfcp shows the older FCP de
Dan
Still the zfcp shows the older FCP device under /etc/zfcp
The replicated volume still shows the older WWPN, FCPS
Not sure if I can update it from 3270 emulator logon ?
On Thu, Jun 30, 2022, 1:25 PM Dan Horák wrote:
> On Thu, 30 Jun 2022 13:11:55 +0400
> Peter wrote:
>
> &g
Hi
I tried bringing up the Linux service machine in our DR site after updating
the guest user directory with FCP device, updating WWPN of Storage box ,
LUN and ran the exec from zVM and I received the below message. Not sure
what needs to be done. Any suggestions?
134.043109م dracut-initqueueم331
Could someone please guide me ?
Regards
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlv
Hello
Good morning
How do we create WWPN or FBA device in DR site ?
As this is the first time we are planning to replicate Linux guest to DR
site.
Is there a way to assign or attach a FBA device to the Linux guest ?
Peter
Thanks Alan,
a little bird told me the same thing...
Best regards and stay safe everyone,
Peter
On 18/12/2021 4:18 am, Alan Altmark wrote:
On Friday, 12/17/2021 at 02:42 GMT, "Peter Bishop"
wrote:
Hi,
asking for a prospective customer...some of you no doubt remember Hoplon
ba
e
holder, but that didn't interest them. Perhaps this might work via an
RPQ...
best regards,
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the mess
On 08.10.2021 18:08, Aria Bamdad wrote:
> Quoting Peter Oberparleiter :
>
> Peter, thank you for your excellent analysis and clarification of how
> this works. It now makes perfect sense to me.
I'm glad that you found the information I provided to be helpful.
[...]
> I test
em UUIDs by chzdev was specifically added to
support correct handling of multi-disk btrfs file systems. Also given
that a file system UUID is supposed to uniquely identify a file system,
I don't consider the current behavior a problem in chzdev.
Regards,
Peter
--
Peter Oberparleiter
Linux on Z Dev
> No. The Integrated ASCII console HMC task does not provide a scroll-back
> function.
I need to correct my statement here - the Integrated ASCII console HMC
task does indeed provide a scrolling capability that can be accessed by
using the Shift+PageUp/PageDown keys.
Thanks to Alan Altmark and
ps://www.ibm.com/docs/pl/linux-on-systems?topic=shutdown-snipl-control-virtual-hardware
or zhmcclient
https://github.com/zhmcclient/zhmccli
Regards,
Peter Oberparleiter
--
Peter Oberparleiter
Linux on Z Development - IBM Germany
-
On 03.03.2021 16:36, Alan Altmark wrote:
> On Wednesday, 03/03/2021 at 02:25 GMT, Peter Oberparleiter
> wrote:
>> 3. Use the ASCII Console as Linux console
>>
>> - add "console=ttyS1" to kernel parameters in /etc/zipl.conf
>> (mind the upper-case S)
>
om the ASCII Console
$ systemctl start serial-getty@ttysclp0.service
When this command completes, there should be a login prompt shown on the
ASCII Console.
You can also check the status of this systemctl unit using:
$ systemctl status serial-gett
effect in the z/VM guest
where the device in subchannel set 1 is missing.
Something like the following should do the trick:
$ chzdev -ep dasd-eckd 0.1.0f57
--
Peter Oberparleiter
Linux on Z Development - IBM Germany
--
For LINUX
.
Is it possible to force the registration to use http instead of https?
As the curl fails with NSS error 8179 error
Please advise
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists
Hi Duncan,
Send SIGNOFF LINUX-390 to lists...@vm.marist.edu
Peter Webb
Technical Analyst
Server Technology
Information Technology Services
T: 416-393-3549
Toronto Transit Commission
McBrien Building, 1900 Yonge Street
Toronto, ON M4S 1Z2
-Original Message-
From: Linux on 390 Port
So I can't cap memory based on a oracle instance ? Like prioritising each
oracle instance ?
On Wed, 17 Jun, 2020, 10:44 AM Rob van der Heij, wrote:
> On Wed, 17 Jun 2020 at 07:06, Peter wrote:
>
> We have 2 IFLs for zVM(non SSI). We are planning to run multiple instances
>
multiple oracle in a single linux guest.
Any advise or pointers are welcome.
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
Hello
When we pull a docker image of oracle on zlinux. How does this allocate on
the given LUNS or storage ? Can I customise a existing docker image ?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions
Hello,
Cross posted
Does anyone has a practice to use docker to deploy linux in zVM ?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX
Hi Rob,
Thank you for the information, it was helpful.
Peter Webb
Technical Analyst
Server Technology
Information Technology Services
T: 416-393-3549
Toronto Transit Commission
McBrien Building, 1900 Yonge Street
Toronto, ON M4S 1Z2
-Original Message-
From: Linux on 390 Port On
Hi Rob,
Could you please point me to a list of the cipher suites with CPACF support?
Peter Webb
Technical Analyst
Server Technology
Information Technology Services
T: 416-393-3549
Toronto Transit Commission
McBrien Building, 1900 Yonge Street
Toronto, ON M4S 1Z2
-Original Message
And today I now see the page working as expected. Thanks Harry.
http://www2.marist.edu/htbin/wlvindex?LINUX-390
kind regards,
Peter Bishop
On 8/06/2020 2:17 pm, Virgilio Calimlim wrote:
Thanks Mark! Found some info I needed at marc.info & linuxvm. BR, Virgilio
On Fri, Jun 5, 2020 at 1
27;s portal while the Marist one is fixed (or until it is).
cheers,
Peter
On 5/06/2020 5:32 pm, Joe Monk wrote:
are you maybe looking for this?
https://linux390.marist.edu
Joe
On Fri, Jun 5, 2020 at 1:34 AM Peter Bishop wrote:
Hi,
when I try to browse this link to use the web archives
http
Glad I asked. Hopefully the server will be back up soon.
It's also good to know the list is still alive and well and to learn
about Marc's archive.
thanks,
Peter
On 5/06/2020 4:47 pm, Cornelia Huck wrote:
On Fri, 5 Jun 2020 16:34:20 +1000
Peter Bishop wrote:
Hi,
when I try
onger available, so be it. I'm using Firefox 76.0.1 on Windoze 10
if that matters.
Thanks in advance,
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the mes
Hello Group
Apologies for the dumb question.
Can we run openshift on zlinux running on top of zVM(z14 hardware) instead
of linuxone ? Is there anyone who have tried this ? Or else this is only
specific to linuxone box ?
Peter
password pairs.
>
> -Original Message-
> From: Linux on 390 Port On Behalf Of Peter
> Sent: Sunday, April 19, 2020 12:59 PM
> To: LINUX-390@VM.MARIST.EDU
> Subject: Re: Cif mount
>
> Thank you
>
> Is it possible to mount cif with multiple uid at once ?
>
>
Thank you
Is it possible to mount cif with multiple uid at once ?
On Thu, 16 Apr, 2020, 5:54 PM Aria Bamdad, wrote:
> Peter,
>
> I don't know if your windows file server is a Samba also or it is actually
> a windows server. In my environment, I use SAMBA as the file server
Hello
While doing an SFTP I ended up with the below error message
Packet_write_wait : connection to 10.x.x.z port 22 : broken pipe
Couldn't read packet : connection reset by peer.
Any suggestions?
Peter
--
For LINU
?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
Hello
If am correct SFTP doesn't follow TLS and has it own cryptography algorithm.
Are there any known vulnerability for SFTP in redhat ? Or there any extra
layer of security that can hardened on sftp apart from certificate based
logon ?
that ssh
> > is picky about permissions
> >
>
> Yes, as the user of the sftp cert needs to do something similr to:
>
> mdkir -p ~/.ssh
> chmod 700 ~/.ssh
> cp ~/.ssh
> chmod 600 ~/.ssh/*
>
>
>
> >
> > On Mon, 13 Apr 2020 at 11:37, Peter wr
Hello Group,
I have created SFTP server on linux . User has given us public key .
Where exactly the public key have to be placed in linux so that user from
windows can login using certificate ?
Peter
--
For LINUX-390 subscribe
I am unable to download the zoom PDF and am not sure if this common problem
?
Can someone please help me with this?
On Sun, 1 Mar, 2020, 4:30 PM Michael MacIsaac, wrote:
> Peter,
>
> We use an open source project on
> https://sourceforge.net/projects/system-zoom/
>
> Contact
Hello
I am trying to understand how cloud is configured using zlinux.
Any manuals or white papers which can help me to read and understand in
detail ?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions
lite 6.
>
> On Thu, Feb 27, 2020 at 5:34 PM Christer Solskogen <
> christer.solsko...@gmail.com> wrote:
>
> > It should also work.
> >
> > On Thu, Feb 27, 2020 at 9:58 AM Peter wrote:
> >
> > > In my case server as X86 and client s390 for redhat ?
>
gt; On Thu, Feb 27, 2020 at 8:50 AM Peter wrote:
>
> > Hello
> >
> > Does satellite Server concept works for Mainframe ?
> >
> > If this is a doable can we run satellite Server on x86 and pu
Hello
Does satellite Server concept works for Mainframe ?
If this is a doable can we run satellite Server on x86 and push the fixes
running on zVM ?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions
the usage
on the Linux on Z builds operates the same way.
Regards,
Peter
-Original Message-
From: Linux on 390 Port On Behalf Of Rick Troth
Sent: Friday, January 10, 2020 8:52 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Pervasive disk encryption questions
CAUTION: This email originated
Hi,
We had similar problem when trying to install RHEL8, we would see all sorts of
strange messages...
The issue resolved itself for us when we changed to using 4GB of memory for the
install.
Our RHEL8 installs now default to 4GB of memory with a 15k CYLs 200 mdisk and
we don't have any issues
ch file or
directory
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
Failed to synchronize cache for repo 'DVD', ignoring this repo.
Dependencies resolved.
Nothing to do.
Complete!
Could someone please point me on where I must be looking ?
Peter
--
For LINUX-390 subscribe / signoff
Hi
I am trying to copy Linux DVD image from FTP folder to Linux image and I
receive below error.
Curl -0 ftp://test:te...@10.x.x.xx//ftp/linux/rhel-8.0-s390x-dvd
curl : (3) port number ended with 'r'.
Any clue what I must be missing ?
Reg
?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
x27;t solve the problem, could you share the installation
parmfile contents (minus the sensitive data).
Regards,
Peter Oberparleiter
--
Peter Oberparleiter
Linux on Z Development - IBM Germany
--
For LINUX-390 subscribe / signoff
Hi Group
Just wanted the check if I can run RHEL 8 on zVM 6.4 ?
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http
Hi
Is there anyone who has done a performance analysis between running Oracle
on zlinux and Oracle exadata ?
This is just an opinion I would like to take it before taking to management.
Peter
--
For LINUX-390 subscribe
Hi
Cross posted
Are there any example to use ICONV services use to define a new code page
and most specifically the requirements the Translation go to and from
IBM-1047.
Regards
Peter
--
For LINUX-390 subscribe / signoff
Or as Yoda would say it? :)
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Neale
Ferguson
Sent: Thursday, March 21, 2019 10:52 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Horizontal vs. Vertical on guest on z/VM
I demand that his next short re
('write table to disk and exit')
You need to perform these steps TWICE, or fdasd will terminate with a
"BUG..." statement when you try to create/change partitions afterwards.
Regards,
Peter Oberparleiter
--
Peter Oberparleiter
Linux on Z Development - IBM Germany
Hi Benjamin,
Sorry to see you go.
To leave the list, send the message 'SIGNOFF LINUX-390' to
'lists...@vm.marist.edu'.
Peter Webb
Technical Analyst
Server Technology
Information Technology Services
T: 416-393-3549
Toronto Transit Commission
McBrien Building, 1900 Yonge
adds.
So there is a support group for Ninja penguins, but it's a long trip.
Peter
"It is much easier to be critical than to be correct." Benjamin Disraeli
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Phil
Smith III
Sent: Wednesda
LPAR does not cause any problems for the OSE.
The problem has been reported by us and I presume a fix is in progress.
Peter
“It is much easier to be critical than to be correct.” Benjamin Disraeli
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Beha
ion correctly and that this is helpful.
Peter (Playing with his new toy.)
“It is much easier to be critical than to be correct.” Benjamin Disraeli
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Marcy
Cortes
Sent: Wednesday, July 27, 2016 10:02 PM
To: L
My brother gave me a t-shirt that said:
"Experience is what you get when you didn't get what you wanted."
Regards,
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Henry
Schaffer
Sent: Wednesday, July 13, 2016 8:17 P
/\$SYSNAME/etc /MaintP21/etc From /Maintp21 but it gave me a
different result
etc == > \$SYSNAMEetc
so i was expecting
etc === > $SYSNAME/etc
Could you please point with the correct syntax.
Peter
--
For LINUX-390 sub
I found a discussion on a Hercules-390 discussion group, and the IAF2 facility
was mentioned as being needed.
How can this be enabled in Hercules?
Regards,
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Mark Post
Sent: Friday, June 24
those blogs be found?
Thanks.
DJ
On 06/06/2016 08:19 AM, VANDER WOUDE, PETER wrote:
> Ed,
>
> You are definitely correct on the contribution that these 2 guys they are
> making. I was reading some of the blog entries by one of them, and there was
> some very interesting it
if your mainframe
is not connected to the internet directly.
I know it opened my eyes a bit more.
Regards,
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ed Jaffe
Sent: Saturday, June 04, 2016 10:30 PM
To: LINUX-390@VM.MARIST.EDU
Subject
he version that will be going into SLES12 SP2 to know if
> it's worth using or not.
Please note that the zdev tools (chzdev, lszdev) included in s390-tools
1.33 are the result of a full rework. I'm confident that all major
issues of earlier versions have been resolved by this new version
Would a "TERM MODE VM" work?
That is before the "IPL 190"
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Scott
Rohling
Sent: Monday, May 02, 2016 1:40 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Instructions for z/VM RSU1601 are not working in reg
Hi Rick,
It sounds like you have configured your telnet connection to be secured in
'static' mode, where what you want is 'dynamic' mode. Have a look also at the
INTERALCLIENTPARMS statement and specifically the SECURECONNECTION PREFERRED
option.
Peter
"Dogs hav
-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Steffen
Maier
Sent: Monday, February 29, 2016 8:48 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: IPL from SAN
On 02/29/2016 02:21 PM, Rothman, Peter wrote:
> This is per our Linux sysadmin.
> I have asked him about the
My apologies if this email starts a new thread. I did not receive any replies
but saw on the web that there were two.
Hopefully my "linux-390" options are now correct.
There were questions about the LUN number and the bootprog.
The LUN of zeroes is correct and I have changed the bootprog to 0.
T
MLOEVL012I: Machine loader up and running (version v2.4.5).
00: MLOEVL005E: No SCSI device found on adapter 0x2000 with WWPN 0xc05076e45d000
00: 01c and LUN 0x.
00: MLOEVL010E: IPL failed.
00: HCPGIR450W CP entered; disabled wait PSW 00020001 8000 0002885E
Peter Rothman
Sen
ation time.
Thanks.
Peter Rothman
Senior Systems Engineer
T +1 (404) 322 4079
M +1 (404) 723 6144
peter.roth...@travelport.com<mailto:peter.roth...@travelport.com>
www.travelport.com<http://www.travelport.com/>
[redefining_email_signature]<http://
I don't have an answer for RHEL, but my notes for Fedora 15 are:
Change the symlink 'ctrl-alt-del.target' from 'reboot.target' to
'shutdown.target'.
cd /lib/systemd/system
ln -f -s shutdown.target ctrl-alt-delete.target
I hope this is helpful.
Peter
-O
02
Ready; T=0.01/0.01 15:26:58
Best regards,
Peter
Peter Bishop
Tech Cons IV
APJ Mainframe
peter.bis...@hpe.com<mailto:peter.bis...@hpe.com>
T +61 2 8278 5697
M +61 400 498 782
Hewlett-Packard Australia Pty. Ltd.
Level 5B
410 Concord Rd
Rhodes NSW 2138
Australia
[http://www8.hp.com/h101
was set.
Does linux do the same type of thing? Or VM?
Regards,
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Raymond
Higgs
Sent: Monday, September 21, 2015 6:17 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Having issues attaching to LUN
gards,
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Scott
Rohling
Sent: Monday, September 21, 2015 3:46 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Having issues attaching to LUNs after Brocade mode change
Ok - seems there is more to
san domain id, between
native brocade mode and mcdata mode).
We recently did the same change, and it caused heartburn for our AIX systems.
We don't have any zLinux systems, but it sounds like what we went through.
Regards,
Peter
-Original Message-
From: Linux on 390
Will,
I would try taking the fcp port offline. The physical port is what get's the
initial port id and the config offline back online would be the only way, I
think, to have the plogi sequence operate correctly.
Regards,
Peter
-Original Message-
From: Linux on 390
Chris,
Have you tried to force the zfcp channels to do a port login (i.e. plogi)?
After changing the brocade interopmode, you must do this, otherwise your system
is probably trying to use it's previous port id mappings, which the interopmode
change changes.
Peter
-Original Me
Hi Tore,
I'm not that familiar with vmur, put it looks like the punch device on the
sender has had a CP SPOOL CONT command issued for it. You can undo it with a CP
SPOOL 00D NOCONT, or in a linux context, vmcp SPOOL D NOCONT. That's my best
guess anyway. I hope it is helpf
Actually, I like the scale in the middle with XEDIT. But I have switched to
LEXX for most programming, so I don't see a scale very often these days.
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Rick Troth
Sent: June 5, 2015 1:21
Hi Matt,
You need to run a CP QUERY DASD LN44A9 command on a class A user. If the
volume does not exist, that is your problem. If it exists, but if it is not
attached to SYSTEM, it is not available for minidisk use. (ATTACH SYSTEM
LN44A9)
Peter
-Original Message-
From: Linux on
close spools files at
midnight.
Peter
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Will,
Chris
Sent: May 27, 2015 10:34 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Are weekly z/VM IPLs necessary?
We have gotten in the habit of IPLing our z/VM and
les. They have orders of magnitude more devices
> to deal with.
>
> Alan Altmark
>
> Senior Managing z/VM and Linux Consultant
> Lab Services System z Delivery Practice
> IBM Systems & Technology Group
> ibm.com/systems/services/labservices
> office: 607.429.3323
>
Cue a little Jethro Tull https://www.youtube.com/watch?v=EsCyC1dZiN8. :)
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Mark Post
Sent: April 28, 2015 1:10 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Silly question about SLES
>>> On 4/28/2015 at
/group
-bash: echo: write error: Invalid argument
The above procedure can be found in SG24-7995-00 page 27, item 2.3.3 How to
add a qeth device manually.
Any help or hints will be appreciated.
Peter Jansen,
Switzerland
Hello,
Does anyone has a step wise procedure on SLES 12 manual Installation over
z/VM ?
Any document or procedure would help me to try.
Peter
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to
Work with IBM.have IBM communicate on your behalf to Oracle.
From: Mark Post
To: LINUX-390@VM.MARIST.EDU,
Date: 02/25/2015 12:59 PM
Subject:Re: oracle licensing
Sent by:Linux on 390 Port
>>> On 2/25/2015 at 10:31 AM, "Levy, Alan" wrote:
> We are in the proc
Hi,
How are the Dasd are being shared so that the Gold image built in 1 VM LPAR
can be transferred to the other VM LPAR in a different machine or IP ?
On Tue, Feb 17, 2015 at 8:22 PM, Peter wrote:
> Hi Mark/All,
>
> Thank you so much.
>
> So I believe I need to punch LINUX
0 Then Exit RC
On Tue, Feb 17, 2015 at 8:15 PM, Mark Post wrote:
> >>> On 2/17/2015 at 09:33 AM, Peter wrote:
> > Thanks but not sure why our SUSE directory does not have the linux file
> in
> > it, but I can see INITRD and PARMFILE.(z/VM).
>
> Because that cha
Hi Mark,
Thanks but not sure why our SUSE directory does not have the linux file in
it, but I can see INITRD and PARMFILE.(z/VM).
On Tue, Feb 17, 2015 at 7:59 PM, Mark Post wrote:
> >>> On 2/17/2015 at 09:04 AM, Peter wrote:
> > Hi,
> >
> > From a previous SUSE i
Hi,
>From a previous SUSE install, Under SLES directory I see the below files
PARMFILE AUTOYAST X1 F
PARMFILE CA X1 F
PARMFILE $DEFAULT X1 V
INITRD $DEFAULT X1 F
VMRDRIKR X1 F
So is that PARMFILE,INITRD and VMRDR files alone to be transferred ?
Peter
On Tue, Feb 17, 2015
1 - 100 of 959 matches
Mail list logo