Do we have a RHEL 2.4 available for my Z9? Is anyone using it today?
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
--
For LINUX-390 subscribe / signoff /
I have several SuSE 8 systems yet to convert to SuSE 10. The V8 systems
all use NIS logons. For my local ROOT account, I cannot change the
password. Linux tells me it has been changed but it lies! My NIS logons
work OK. Any ideas
Lea Stahr
Senior Systems Engineer
Linux and zLinux
I would suggest that you have a very small zVM emergency system to IPL
to allow you to fix the main system. I had a 2 volume system just for
that purpose.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original
As usual, Bill is right on top of things! Good job Bill.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Bill Bitner
Sent: Friday,
I cannot start SSH on my cloned SuSE 10 SP1 system under zVM. It does
not start at boot time, but gives the error
cipher_encrypt: bad plaintext length 337
I get the same error if I manually try to start it. In the
Virtualization Cookbook for SLES 10 SP2 page 152 it gives the procedure
for
on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Leland Lucius
Sent: Friday, October 31, 2008 9:03 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SSH on SuSE 10 SP1 problem
Stahr, Lea wrote:
brksvl01:/usr/bin # ssh-keygen -t rsa -N -q -f ssh_host_rsa_key
I believe you're using a double quote
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SSH on SuSE 10 SP1 problem
The character is an escape character for the virtual machine console
(aka
3215). To enter two double quotes you need to type in 4 of them.
On 10/31/08 10:05 AM, Stahr, Lea [EMAIL PROTECTED] wrote:
I typed in two double quotes
9:03 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SSH on SuSE 10 SP1 problem
Stahr, Lea wrote:
brksvl01:/usr/bin # ssh-keygen -t rsa -N -q -f ssh_host_rsa_key
I believe you're using a double quote () and when it maybe should have
been two singles (''). In any case, you're missing a close quote
The shortened procedure worked fine. I received messages that new keys
were generated when I booted the system the first time. Thanks to all.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From:
compare what you change with what the script changes.
Ron Foster
Baldor
Stahr, Lea wrote:
I am using the same method of cloning SuSE 10 that I used for SuSE 8.
I DDR the disks, the use RPL to replace the name and IP in /etc files.
This worked well for SuSE 8, but for SuSE 10 I have a file(s
I have an /etc/HOSTNAME and its correct.
I just downloaded and printed the book this morning.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On
on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Thursday, October 30, 2008 12:32 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Cloning SuSE 10 under VM
I have an /etc/HOSTNAME and its correct.
I just downloaded and printed the book this morning.
Lea Stahr
Senior Systems
I am using the same method of cloning SuSE 10 that I used for SuSE 8. I DDR the
disks, the use RPL to replace the name and IP in /etc files. This worked well
for SuSE 8, but for SuSE 10 I have a file(s) somewhere else that is not being
changed and prevents me from using NIS. Any ideas where
And I still like my 360 model 30 back in 1967.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Phil Smith III
Sent: Wednesday, October
Of
Douglas Wooster
Sent: Wednesday, October 22, 2008 9:33 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: z10 BC is Here
On 10/22/2008 07:21:41 AM, Stahr, Lea wrote:
And I still like my 360 model 30 back in 1967.
Hey! We had two of those, when I first got into the business ... in
1977.
The OS was 14KB
Does anyone have IBM Tivoli Composite Application Manager for WebSphere
running on zLinux or know if it will run there? The manual does not
mention this environment.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Tuesday, October 14, 2008 7:08 AM
To: LINUX-390@VM.MARIST.EDU
Subject: [LINUX-390] IBM Tivoli Composite Application Manager for
WebSphere
Does anyone have IBM Tivoli Composite Application Manager for WebSphere
:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Tuesday, October 14, 2008 9:08 AM
To: LINUX-390@VM.MARIST.EDU
Subject: IBM Tivoli Composite Application Manager for WebSphere
Does anyone have IBM Tivoli Composite Application Manager for WebSphere
running on zLinux or know if it will run
: Monday, October 06, 2008 11:35 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SSH/Telnet into SuSE V10 SP1 problem
On 10/6/2008 at 8:45 AM, in message
[EMAIL PROTECTED],
Stahr,
Lea [EMAIL PROTECTED] wrote:
I have installed SuSE 10 SP1 in my IFL 2nd level. It is running OK,
but
I cannot SSH
: Tuesday, October 07, 2008 11:12 AM
To: Stahr, Lea
Subject:
[EMAIL PROTECTED] ~]# ftp brksvl10
Connected to brksvl10.
220 (vsFTPd 2.0.5)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
- Josh
Josh Doornbos
I have installed SuSE 10 SP1 in my IFL 2nd level. It is running OK, but
I cannot SSH, Telnet, or VNC into it. My only access is from VM. Any
idea about what I missed?
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=167.6.208.17 DST=167.6.0.6
LEN=48 TO
S=0x00 PREC=0x00 TTL=122 ID=28163 DF PROTO=TCP
NTP on Linux?
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Alan Altmark
Sent: Thursday, September 11, 2008 9:34 AM
To:
We are considering a pilot of OmniFind Text Search Server for DB2. It requires
4GB of memory, 20GB of disk, 2 dual-core 2.66 GHZ processors and a 32 bit SuSE
SLES 10 OS. Is anyone running this on VM in an IFL? Is it possible?
CONFIDENTIALITY NOTICE: This e-mail, and any attachments
and/or
I have a SLES 8 system that is coming up with /var not mounted. When I
run a fsck /dev/dasdd1 on it I receive the following:
fsck.reiserfs /dev/dasdd1 failed (status 0x10). Run manually!
Anything I can do to save it?
Lea Stahr
Senior Systems Engineer
zVM, Linux and zLinux
When I installed VM BSEPP, I did not know if the idea of virtualization
would last. Now I have a penguin ranch.
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
OS/VS1?
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
John Summerfield
Sent: Thursday, August 21, 2008 10:59 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re:
recovery stuff). We even had pre-production
3270 screens g.
I know, this dates me a lot g.
Kevin
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Thursday, August 21, 2008 12:46 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Distribution ages
started at the outside or the inside of the PT spool. 2540
card reader/puches and 1403 printers.
Ah, the good ole days.g.
Kevin
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Thursday, August 21, 2008 1:11 PM
To: LINUX-390@VM.MARIST.EDU
There is a command that will id the version of Linux. I tried uname -a
and it did not tell me the distribution.
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-390
CONFIDENTIALITY NOTICE: This e-mail, and any attachments
and/or documents linked to
I am trying to add disk to SuSE SLES 10. In SLES 8, I did a MAKEDEV to
create the device file, then did a format and a mkswap. I have no
MAKEDEV script (I did a FIND on it). How can I make a device file for a
new DASD?
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
The disk was defined in the VM directory for the Linux guest but was not
picked up during the boot. On SLES 8 we added them ZIPL.CONF but the
SLES 10 ZIPL.CONF file does not contain the disk range on the PARAMETERS
statement.
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
is:
dasd_configure ccwid online use_diag
And, as mentioned, after you add the disk(s), run mkinitrd and zipl.
The script creates the hardware config file for the disk in
/etc/sysconfig/hardware.
On Tue, Aug 12, 2008 at 12:54 PM, Stahr, Lea [EMAIL PROTECTED]
wrote:
The disk was defined in the VM directory
Friday August 6 of what year?
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Pamela Christina - warm and sunny Endicott NY
Sent: Wednesday, August 06, 2008
] On Behalf Of
Mark Post
Sent: Wednesday, August 06, 2008 2:33 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: VNC problem
On 8/6/2008 at 3:27 PM, in message
[EMAIL PROTECTED],
Stahr,
Lea [EMAIL PROTECTED] wrote:
Thanks! The firewall was active by default, and I now get a connection
after shutting
I used port 5901 to get through the firewall and it worked.
Dumb me.
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Thursday, August 07
[mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Thursday, August 07, 2008 8:41 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: VNC problem
I tried that and I could not get it to work, The firewall stopped all
access. I tried the standard port 2 and I tried 5801.
Lea Stahr
zVM, Linux
Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Stahr, Lea
Sent: Thursday, August 07, 2008 8:01 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: VNC problem
I was using a W2000 client and VNC did not respond
Thanks Gary. I am using the default LDUBUF : Q1=100% Q2=75% Q3=60% and will try
this, then the STORBUF: Q1=140% Q2=130% Q3=120%.
Lea Stahr
zVM, Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
From: Linux on 390 Port
, found at
VELOCITYSOFTWARE.COM/seminar/workshop.html I would recomend you at least see
day one.
Horst, you should look at the handout from the configuration guidelines you
received from
me about 3 years ago. Or review VELOCITYSOFTWARE.COM/PRESENT/CONFIG.
Stahr, Lea wrote:
Thanks Gary. I
PROTECTED] On Behalf Of
Mark Post
Sent: Thursday, August 07, 2008 10:23 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: VNC problem
On 8/7/2008 at 9:04 AM, in message
[EMAIL PROTECTED],
Stahr,
Lea [EMAIL PROTECTED] wrote:
I just tried the web interface and it responded to 5801, but I had to
give it ROOT
PROTECTED] On Behalf Of
Mark Post
Sent: Thursday, August 07, 2008 10:38 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: VNC problem
On 8/7/2008 at 11:32 AM, in message
[EMAIL PROTECTED],
Stahr,
Lea [EMAIL PROTECTED] wrote:
When I enter on port 5901 it takes me immediately to the Linux login
screen
I have a new SuSE 10 SP1 guest. I have started the VNCSERVER on Linux. I
cannot connect to it, the connections timeout from W2000 viewers. I am
using VNC 4.1.2. I have looked at the RealVNC site and cannot find the
problem. I do not know what is supplied with Linux. Should I try the
newer 4.4
.
-
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
08/06/2008 02:47 PM
Please respond to
Linux on 390 Port LINUX-390@VM.MARIST.EDU
To
LINUX-390@VM.MARIST.EDU
cc
Subject
VNC problem
I have a new SuSE 10 SP1 guest. I have started
I have installed the SuSE 10 SP1 under my zVM 5.2. I chose to do the SSH
install and it worked OK. When I tried to use PUTTY to access the
system, it presented the LOGON and PASSWORD prompts but I always receive
an ACCESS DENIED reply. I can SSH in from a SuSE 8 guest OK using the
same userid and
I tried the 2 only and it abended. Then I turned on X11 Forwarding and
it worked. This is the newest level of PUTTY .60 . Thanks everyone for
your help.
Lea Stahr
Linux and zLinux Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port
Inefficiency? Aren't all interpretive languages inefficient by
definition versus compiled languages?
Lea Stahr
Linux, zLinux, and zVM Administrator
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Rob van
Generally, most executions are highly repetitive, making the execution
time the determining factor. The less CPU time the better. Ad hoc runs
are more concerned with coding time, and the development times are high
value. I have seen so much really bad Java lately that eats wall clock
time!
Lea
] On Behalf Of
Mark Post
Sent: Thursday, April 24, 2008 3:46 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SuSE 10 Starter System Problem
On Thu, Apr 24, 2008 at 3:53 PM, in message
[EMAIL PROTECTED],
Stahr,
Lea [EMAIL PROTECTED] wrote:
I am installing the SuSE SLES 10 Starter System on VM V5.2. Everything
I am installing the SuSE SLES 10 Starter System on VM V5.2. Everything
works fine until I try to VMARC UNPACK NOV151 VMARC G * * A. It does a
lot of I/O for 15 minutes, then hangs with no I/O for hours.
I have tried the VMARC that came with the Starter System and the one on
the 19F disk with the
We looked at doing this but could find no users that ran it all. The
Oracle will run on zVM but we were told not PeopleSoft code.
Lea Stahr
Linux, zLinux, and zVM Administrator
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf
On Red Hat, the file is /etc/redhat-release.
Lea Stahr
Linux, zLinux, and zVM Administrator
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Edmund R. MacKenty
Sent: Thursday, January 31, 2008 12:13 PM
To:
Probably everyone on this list has received help from Barton in the
past.
Lea Stahr
Linux, zLinux, and zVM Administrator
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Michael MacIsaac
Sent: Monday, January 28, 2008 8:41
I have been using rpl for years to help clone Linux systems easily.
From: Linux on 390 Port on behalf of Gary Detro
Sent: Tue 1/15/2008 7:00 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: IP address changed, how do I update rhel4 to match?
I found a module from
I do not know if the problem is me or the new procedure.
To FTP any files, I cannot FTP directly to/from Windows and zVM V5.1.
I can FTP from Windoze to a SLES 8, then from VM do a GET (two stage
transfer). In using the new procedure to FTP VMAEXEC, I change to binary
OK, but when I try to site
We lost our Linux Websphere POC to the Windows group because we were too
slow. I want a Z6 tomorrow.
Lea Stahr
Linux, zLinux, and zVM Administrator
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
John Summerfield
Sent:
We use SuSE on the z. The original reason was the support for our
environment. Last week at the IBM Expo, two presenters from IBM said
that they had given code to SuSE and Red Hat that only SuSE had included
in their distributions. Our two 32 bit Red Hat HPC clusters are Red Hat
today but the
Keep to the conceptual ideas and ignore the possibly inaccurate details.
I am looking for more customers on Linux here at ITEC.
Lea Stahr
Linux and zLinux Administrator
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark
I worked on a B3500 and all I can remember was the goofy card reader
with the drum. Cards would shoot all over the computer room when the
gate stuck open.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On
Installation of the RPQ will be..you guessed it, Saturday Night!
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Tim Hare
Sent: Monday, May 07, 2007 11:13 AM
To: LINUX-390@VM.MARIST.EDU
getent is working, pam should not have any issues, although you
might
need to tweak the pam stack to handle if the NIS server is unavailable.
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
03/22
I use the exact same backup procedure in my shop. Guest downtime is
only 5-10 minutes.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Jon Brock
Sent: Thursday, March 29, 2007 8:55 AM
To:
Fewer patches for Linux can mean either fewer problems fixed or fewer
problems that NEED to be fixed.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Miguel Delapaz
Sent: Friday, March 23, 2007
I am trying to startup NIS usage on both SuSE and Red Hat. They are
connecting to an HP-UX Unix master server. I have followed the
instructions and can do a YPWHICH, but the HP-UX system does not allow
me to authenticate because we (by default) use PAM. Can someone point me
to a source of info to
to appear.
If you issue:
getent passwd
do you see your NIS users too?
If not then your nsswitch.conf and/or nscd may need to be reconfigured.
once getent is working, pam should not have any issues, although you
might
need to tweak the pam stack to handle if the NIS server is unavailable.
Stahr
the + entries in passwd, shadow(if
applicable), and group..
jrw
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
03/22/2007 10:40 AM
Please respond to
Linux on 390 Port LINUX-390@VM.MARIST.EDU
To
LINUX-390@VM.MARIST.EDU
cc
Subject
Re: [LINUX-390] NIS on Linux
nsswitch.conf and/or nscd may need to be reconfigured.
once getent is working, pam should not have any issues, although you
might
need to tweak the pam stack to handle if the NIS server is unavailable.
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
03/22
Subject: Re: NIS on Linux
I would also turn off nscd if it's running until you were sure things
were
working right.
jrw
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
03/22/2007 10:52 AM
Please respond to
Linux on 390 Port LINUX-390@VM.MARIST.EDU
To
LINUX-390
I stopped the NSCD. Logon failed on Authentication Failure. This is SLES
8. Userid is not in the local passwd file.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Michael MacIsaac
Sent:
, if using SuSE it's just /etc/init.d/nscd stop
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
03/22/2007 11:15 AM
Please respond to
Linux on 390 Port LINUX-390@VM.MARIST.EDU
To
LINUX-390@VM.MARIST.EDU
cc
Subject
Re: [LINUX-390] NIS on Linux
Do I
in the way?
are you using the default pam_unix2.conf or has it been modified at all?
are you logging into the console (/etc/pam.d/login) or via ssh
(/etc/pam.d/sshd)?
jrw
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
03/22/2007 12:06 PM
Please respond to
Linux
I use CMS for adding a temporary expansion of disk work area on a spare
3390 allocation also (very easy, then Linux detects it).
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
David Boyes
Sent:
I use VDISK successfully every day on 18 SuSE systems and VM 5.1..
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Tom Duerbusch
Sent: Monday, February 26, 2007 1:56 PM
To:
Of
James Melin
Sent: Monday, February 26, 2007 2:29 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Perceptions of zLinux
Lea, just curious what sizes of vdisk did you use, and how much central
and expanded storage do you have?
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux
I agree!! Could you start tomorrow?
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Scully, William P
Sent: Wednesday, January 31, 2007 10:01 AM
To: LINUX-390@VM.MARIST.EDU
Subject: OT: Linux and
A railroad track diagram is much clearer, more concise than several
pages of verbose explanation. One vote for the RR track.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
David Boyes
Sent:
My system does not have SPident at all. My SuSE-release files just says
Version 8.1 and nothing else.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
RPN01
Sent: Wednesday, January 10, 2007 2:23
I have what I think is a major Linux problem (not on s390 of course). I
have a large Red Hat 8 cluster. I have searched the Red Hat database and
found the Time Zone patch
https://rhn.redhat.com/errata/RHEA-2006-0745.html but it does not list a
RH8 version. Any ideas? I have the patch for SuSE
Hello group. We are using Mainline Systems for SuSE linux support. While
their support is good, it's also expensive. Can you give me some of your
support providers to compare? Thanks.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
I did FDR backups of a running system and they would not run when
restored. Shut down the Linux system and they work fine.
Lea Stahr
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Tim Hare
Sent: Tuesday,
I do not have an spident command (command not found) on SLES 8.
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Dominic Coulombe
Sent: Wednesday, September 20, 2006 8:06
I tried both.
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark D Pace
Sent: Wednesday, September 20, 2006 9:34 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Service
Is anyone out there running zVM 5.1 on a Z9 model 503? Any problems?
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
--
For LINUX-390 subscribe / signoff / archive access instructions,
send
I plan on coming up on a 2094-503 under VM 5.1 (with lots of
maintenance) and run SLES 8 for a few months until I get SLES 9 ready.
Has anyone done this???
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port
I will be running SLES 8 under V5.1 on Z9 EC 503 starting next week (I
hope).
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
David Boyes
Sent: Thursday, September 07,
I will be running SLES 8 under V5.1 on Z9 EC 503 starting next week (I
hope). We do not the hardware yet.
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
David Boyes
I use the VM Toolkit RTM to monitor guest performance.
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Peter E. Abresch Jr. - at Pepco
Sent: Wednesday, August 16, 2006
My SLES 8 guests running under ZVM V5.1 on a Z099 work fine.
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Ken Schweiker
Sent: Monday, August 07, 2006 10:09 AM
To:
You are correct about the cacheing of filesystems. The clustered systems
I referred to are DB2 Connect gateways and contain no shared
filesystems. I will route all DB2C users through one gateway wile
backing up the other. Then reverse positions. When both are done, bring
them both online.
For
Funny thing testing! I tested it and it worked four times in a row. Then
when I actually needed it, it failed. Thank you fuzzy backups!
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED]
on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
John Summerfied
Sent: Wednesday, July 26, 2006 7:18 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Bad Linux backups
Stahr, Lea wrote:
With clustering, you shut down one image and do an OFFLINE backup
while
the application runs on the second image
PROTECTED] On Behalf Of
John Summerfied
Sent: Monday, July 24, 2006 6:03 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Bad Linux backups
Stahr, Lea wrote:
I run SuSE SLES 8 under ZVM 5.1 in an IFL. The DASD are in a SAN that
is
also accessed by ZOS. Backups are taken by ZOS using FDR full volume
copies
can you post any messages you get when you try to boot them?
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port
LINUX-390@VM.MARIST.EDU
To
LINUX-390@VM.MARIST.EDU
cc
07/25/2006 07:17 AM
Subject
issue.
Stahr, Lea [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
07/25/2006 08:17 AM
Please respond to
Linux on 390 Port LINUX-390@VM.MARIST.EDU
To
LINUX-390@VM.MARIST.EDU
cc
Subject
Re: [LINUX-390] Bad Linux backups
FDR says working as designed. They back up
Gentlemen, I must agree with the validity of external backups, but only
when the Linux is down. Any backup taken internally OR externally while
the system is running may not work due to extensive caching by the
system itself and by the applications. If I cannot restore my
application to a current
I run SuSE SLES 8 under ZVM 5.1 in an IFL. The DASD are in a SAN that is
also accessed by ZOS. Backups are taken by ZOS using FDR full volume
copies on Saturday morning (low usage). When I restore a backup, it will
not boot. The backup and the restore have the same byte counts. Linux
support at
These are standard image systems that I can clone from a master and have
in production in 2 hours. But what if its not standard? Then I have
customizations that are lost.
Lea Stahr
Sr. System Administrator
Linux/Unix Team
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on
96 matches
Mail list logo