You won't need any iLO license for just power control. I'm quite sure
about that.
--binghe
On 2009-3-11, at 20:23, Adrian Chapela wrote:
One more time.
I have decided to use external/riloe as my stonith device but I have
some doubts. My system will be a cluster of two nodes.
First, Do
return values when using ipmitool reset on some HP Proliant DL140/145
servers.
Regards,
Chun Tian (binghe)
I have made some luck getting STONITH to work but still running into
a problem I can not figure out how to debug.
In the ha.cf on each host I have:
stonith_host mds2.engin.umich.edu
在 2008-7-2，下午6:48， Nathan Ward 写道：
On 2/07/2008, at 9:34 PM, Patrik Martinsson wrote:
Let´s say i want to change my configration on my ha-cluster server,
normally
i would change the config file (in this case then cib.xml) on the
main-central-server, and then let my management-system take
Why not just run 2+ instances of ldirectord, managing different
virtual IPs, and mapping them into one DNS name?
Like this:
www.xxx.com IN A ip1
www.xxx.com IN A ip2
WWW.xxx.com IN A ip3
ip1,ip2,ip3 are all ldirectord-managed virtual IPs. Since
Heartbeat can keep all these IPs always
Hi, Chad
I also thought this since I'm using Mac OS as my desktop since four
month ago. For now, my solution is running a Linux in VMware Fusion
and ssh to it (with X forwarded) and display hb_gui window through
X11.app on my Mac desktop.
I think to compile hb_gui on Mac OS, the GUI part
Hi,
On Jun 15, 2008, at 8:25 PM, Chun Tian (binghe) wrote:
Hi, Joe
GNU cfengine [1] may be helpful here.
no no no
let the CIB synchronizes the files itself.
the most common reason for the files to get out-of-sync, is if some
other process (human or automated) modified the on-disk copy
config into one central cfengine
server and use Subversion to track their changes. And yes, when I
create a HA cluster from scratch, cfengine help me put every file at
their right position.
Regards,
Chun Tian (binghe)
___
Linux-HA mailing list
Linux
:
editfiles:
pull_upload_cib.afs_1::
{ $(cfinput)/files/heartbeat/cib.xml
ReplaceFirst cib .* With cib
LocateLineMatching ^ +nodes$
DeleteToLineMatching ^ +/nodes$
ReplaceFirst /nodes With nodes/
}
Regards,
Chun Tian (binghe)
[1] http
Hi, there
If you're using HA 2.x, maybe you should show some parts of your
cib.xml. I have running DRBD HA clusters, and I think the key is in
the cib.xml
Regards,
Chun Tian (binghe)
Isn't anybody able to give a hint why promoting the DRBD-instance
fails? :(
Von: [EMAIL PROTECTED
,
Chun Tian (binghe)
Hi,
thanks for your reply.
The attachements were already added to the first mail to the list
but here they are again :)
Thanks
Florian
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
ha.org] Im Auftrag von Chun Tian (binghe)
Gesendet
Hi, Dave
I use Dell Servers and use the DRAC (Dell Remote Access Card) as the
stonith. It supports IPMI and am using external stonith. See my
earlier post for setup. About $300/card.
As I know (and try), DELL x850, x950 Servers without DRAC card can
also support IPMI (=1.5).
HP
Hi, there
I have tested stonith from the command line and was able to reset the
target PC. On the command I used the following:
stonith -t external/ipmi -T reset -p capestor2 10.43.120.134 ADMIN
mypassword capestor2
This worked marvelously! So then I move the stuff into the ha.cf.
Not
reading this post acknowledge that
they
are using it and offer any suggestions.
In case it matters (because it might) I am running on CentOS 5.1
(fully patched as of last week) on x86_64 system.
thanks and regards,
Doug
On Fri, Feb 22, 2008 at 8:47 AM, Chun Tian (binghe)
[EMAIL PROTECTED
acknowledge that they
are using it and offer any suggestions.
In case it matters (because it might) I am running on CentOS 5.1
(fully patched as of last week) on x86_64 system.
thanks and regards,
Doug
On Fri, Feb 22, 2008 at 8:47 AM, Chun Tian (binghe)
[EMAIL PROTECTED] wrote:
Hi, there
I
stonith got `256'. At present, I think
this is a bug of stonith and I'll try to prove this theory.
Regards,
Chun TIAN (binghe)
NetEase.com, Inc.
Yeah my eyes are going bad. I am so used to seeing ${...} It sucks
getting old :)
thanks,
Doug
On Fri, Feb 22, 2008 at 2:15 PM, Chun Tian (binghe
Hi,
So far as I know, I don't think any similarity between Linux-HA and
OpenMosix. They do different job: one for server resource HA (resource
of any type), the other for computing resource management. Don't know
about RedHat Cluster.
Hello all,
does anyone known if there's a note,
Hi, Ryan
Why not just use IPMI? I have some Dell PE2950 too, and all PE2950
(with and without DRAC card) can activate a IPMI interface, which is
enough for stonith use, though you may have to use the external/ipmi
but the stonith2/ipmilan.
Regards,
Chun TIAN (binghe)
在 2008-1-25，上午3:50
cannot work, because ipmitool power reset sometimes
successfully reset my server but didn't exit with 0, and I have to
modify the script to let it exit 0 when calling with reset ...
Regards,
Chun TIAN (binghe)
在 2008-1-23，下午11:40， Dejan Muhamedagic 写道：
Hello,
Again on the IPMI.
As it says
server has been reset ... I haven't analyze the UDP
packet which come between ipmitool and my server, cannot say which is
wrong yet.
This is either a problem of ipmitool or my HP DL145 server. My
solution is put a exit 0 in external/ipmi :)
Regards,
Chun TIAN (binghe)
Thanks,
Dejan
在 2008-1-24，下午7:45， Chun Tian (binghe) 写道：
在 2008-1-24，下午6:36， Dejan Muhamedagic 写道：
2. external/ipmi cannot work, because ipmitool power reset
sometimes
successfully reset my server but didn't exit with 0, and I have to
modify
the script to let it exit 0 when calling with reset
].s_value, operator) == 0) {
tmp-privilege = 3;
}
Thanks.
Chun TIAN (binghe)
diff -r 7cea5a8c5c0e lib/plugins/stonith/ipmilan.c
--- a/lib/plugins/stonith/ipmilan.c Fri Dec 21 23:13:06 2007 -0700
+++ b/lib/plugins/stonith/ipmilan.c Wed Jan 02 16:34:51 2008 +0800
Hi, Johan
I have some HP DL360 too. Does DL360 support a IPMI LAN interface?
After I've installed hp-OpenIPMI, I only got a KCS interface, but no LAN
found, strange:
print-6:~# ipmitool -I open channel info
Channel 0xf info:
Channel Medium Type : System Interface
Channel Protocol Type :
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
What's haclient? You mean the hb_gui program?
I just change hacluster's password, and use hacluster as user to login
to heartbeat.
Chun Tian (binghe
mysql ocf script also check the OCF_RESKEY_test_user in /etc/passwd:
grep $OCF_RESKEY_test_user /etc/passwd /dev/null 21
if [ ! $? -eq 0 ]; then
ocf_log err Test user $OCF_RESKEY_test_user doesn't exit;
exit $OCF_ERR_ARGS;
fi
I dont's think this is correct because
24 matches
Mail list logo
