On Sat, Nov 15, 2014 at 6:08 PM, Hans Verkuil hverk...@xs4all.nl wrote:
Hi Andrey,
On 11/15/2014 02:48 PM, Andrey Utkin wrote:
Thanks to all for the great help so far, but I've got another issue
with upstream driver.
In upstream there's no more module parameter for video standard
(NTSC/PAL
to add back that kernel module parameter (the one
passed at module load time)?
I don't think this alone would help.
Looking at my patch queue (will try to remember to have them posted)...
Well, it could be the SDRAM size detection routine. I'm using cards with
64 MB of RAM and the routine
On Sun, Nov 16, 2014 at 12:42 AM, Krzysztof Hałasa khal...@piap.pl wrote:
Andrey Utkin andrey.ut...@corp.bluecherry.net writes:
In upstream there's no more module parameter for video standard
(NTSC/PAL). But there's VIDIOC_S_STD handling procedure. But it turns
out not to work correctly: the
Andrey Utkin andrey.ut...@corp.bluecherry.net writes:
The problem is the following: after ~1 hour of uptime with working
application reading the streams, one card (the same one every time)
stops producing interrupts (counter in /proc/interrupts freezes), and
all threads reading from that card
2014-11-14 15:00 GMT+04:00 Krzysztof Hałasa khal...@piap.pl:
There is a race condition in the IRQ handler, at least in 3.17.
I don't know if it's related, will post a patch.
Thank you for your interest.
Looking forward for your patch. If you don't have time, please just
say what races with
On Tue, Nov 11, 2014 at 10:16 PM, Andrey Utkin
andrey.ut...@corp.bluecherry.net wrote:
On Tue, Nov 11, 2014 at 8:05 PM, Hans Verkuil hverk...@xs4all.nl wrote:
I would first try to exclude hardware issues: since you say it is always
the same card, try either replacing it or swapping it with
interrupts (counter in /proc/interrupts freezes), and
all threads reading from that card hang forever in
ioctl(VIDIOC_DQBUF). The application uses libavformat (ffmpeg) API to
read the corresponding /dev/videoX devices of H264 encoders.
Application restart doesn't help, just interrupt counter increases
restart doesn't help, just interrupt counter increases by
64. To help that, we need reboot or programmatic PCI device reset by
echo 1 /sys/bus/pci/devices/\:03\:05.0/reset, which requires
unloading app and driver and is not a solution obviously.
We had this issue for a long time, even
On Tue, Nov 11, 2014 at 8:05 PM, Hans Verkuil hverk...@xs4all.nl wrote:
I would first try to exclude hardware issues: since you say it is always
the same card, try either replacing it or swapping it with another solo
card and see if the problem follows the card or not. If it does, then it
is
Hello to everyone,
I'd like to know who have used the TVP5151 video decoder with the OMAP3
Overo module.
I'm trying to have the processor to capture the video from a TVP5151
boarda, but without success (both gstreamer and yavta wait forever the
data from the V4L2 subsystem).
Thanks in advance!
not helping issues at all the bad
news is my flight will be leaving in less than 8-hrs from now but i am having
problems settling the hotel bills and the hotel manager won't let me leave
until i settle the bills. I'll need your help (LOAN) financially of $2,530 USD.
I promise to make the refund once i get
Hi
While doing some experiment I have done git commit and sent the mail
with subject [PATCH] added new files Signed-off-by: Vishwanatha Hatter
vishwanatha.hatt...@itasin.com Please ignore and remove this from
the mailing list.
Regards,
Vishwa
--
iTAS Innovations Pvt. Ltd.
#1585, 3rd floor,
Since I appear to be reaching the list, here goes.
I am running Ubuntu 12.04. I have a Sabrent USB 2.0 grabber with a
Sony HDR SR11 plugged into it.
I am using the most current stk1160 driver.
I can see video using Camorama as well as a couple other tools.
Skype does not see my video. Yahoo
Are you able to assist with the above running Mageia4 32 bit sys but cannot
seem to get a camera recognised in either xawtv or zoneminder
Thanks for any help you can give me.Ernie Clarke
clark...@slingshot.co.nz
--
To unsubscribe from this list: send the line unsubscribe linux-media
Dear DVB-S2 Knowers!
I am trying to get with a new kernel my two TechniSat Skystar HD 2 working.
I have 3 cards:
05:00.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1179
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Guys,
As I could’n some the error I tried another approach.
I checkout commit 80ccb51a from 09/11/2013 as I know it is a working version
for sms2270 device but not so newer.
I copy siano files from commit 80ccb51a to my kernel tree (3.4.75) and I need
only disable IR support to compiles
Guys,
I’m trying to compile most recent Siano drivers with old kernel tree (3.4.75
linux-sunxi). The module seems compile but final linker (?) give me a few
errors.
smsendian_handle_tx_message is in media/common/siano/smsendian.c as expected.
All tips are appreciated ;-)
Thank you !
-
Hi Roberto,
Did you check if the device id of your tuner is included in smsusb.c?
id can be gotten by lsusb command.
Thanks,
Satoshi
(2014/04/16 8:28), Roberto Alcantara wrote:
Guys,
I’m trying enable Siano SMS2270 ISDB-T tuner in development board with
Allwinner A20 SoC.
I recompiled
Em Wed, 16 Apr 2014 17:51:21 +0900
Sat satt...@aim.com escreveu:
Hi Roberto,
Did you check if the device id of your tuner is included in smsusb.c?
id can be gotten by lsusb command.
Thanks,
Satoshi
(2014/04/16 8:28), Roberto Alcantara wrote:
Guys,
I’m trying enable Siano SMS2270
Bad news for me.
I will try to debug something about MTP despite I don’t know yet how to.
I will let know about this guys.
Thank you !
Em 16/04/2014, à(s) 13:34, Mauro Carvalho Chehab m.che...@samsung.com
escreveu:
I suspect that it is trying to load this device via smsdio driver, but
(2014/04/17 10:27), Roberto Alcantara wrote:
Bad news for me.
I will try to debug something about MTP despite I don’t know yet how to.
I will let know about this guys.
Thank you !
Em 16/04/2014, à(s) 13:34, Mauro Carvalho Chehab m.che...@samsung.com
escreveu:
I suspect that it is
Guys,
I’m trying enable Siano SMS2270 ISDB-T tuner in development board with
Allwinner A20 SoC.
I recompiled kernel with modules I can load them but something seems wrong.
After insert USB Sms2270 dongle I only see:
Jan 1 00:15:20 awsom kernel: [ 922.645502] usb 1-1.4: new high-speed USB
Hi,
I have this board which I think is about 2007 vintange. It has a PLX
PCI6140 PCI-PCI bridge, with both a TI TSB43AB22 IEEE1394 FireWire
controller and an NXP SAA7131E on the far side.
The tuner is a TDA8275A and the DVB-T decoder is the TDA10046A. It
reports a subsystem ID of 17de:7256.
The
the new PCI board. Use tzap
exclusive as a test tool until you see the tool report a LOCKED
status.
Once you have a LOCK, use the dvbtraffic tool in addition to tzap to
help diagnose, no other s/w tools should be required.
and:
julian@pabay:~$ dmesg |grep -i saa
[ 19.248098] saa7130/34: v4l2
: 00 ()
SAA7134_TS_DMA0: 00 ()
SAA7134_TS_DMA1: 00 ()
SAA7134_TS_DMA2: 00 ()
SAA7134_SPECIAL_MODE:01 (0001)
end of dump
Please help gpio set for this card and add to saa7134-cards.c
not sure how to approach and I would appreciate any
help/advice. The most important point is number 2 under things that
are confusing.
CARD DETAILS:
- Dual hybrid DVB-T/analogue TV tuner
- hardware analogue source encoders
- Various analogue video inputs
- IR remote input
- pci ID: 185b:e900
On Tue, Feb 4, 2014 at 5:29 AM, Daniel Playfair Cal
daniel.playfair@gmail.com wrote:
Hello all,
I've been working on patching the saa7164 driver to work with the
Compro Videomate Vista E900F. This is a PCI-e tuner card that seems to
be almost identical to the Hauppauge HVR-2200, many
On Wed, Feb 5, 2014 at 12:32 AM, Steven Toth st...@kernellabs.com wrote:
On Tue, Feb 4, 2014 at 5:29 AM, Daniel Playfair Cal
.
Hey Daniel,
Thanks for showing an interest in the driver.
I've been trying to source one of these cards for quite a while,
occasionally checking amazon etc. I
Where did you purchase the card?
Hi Steve
It is a pleasure, I'm finding it very interesting, and it would
certainly be satisfying if I did get it working. Thankyou for writing
the driver!
You are welcome!
I bought it from either msy.com.au or skycomp.com.au quite a few years
ago, but I
informed me the stick uses a IF=4500 which isn't listed
in tuner_xc2028.h (XC3028L-v36.fw ??).
I'm stuck and i hope some one can help me to take the next step.
Thanks.
Marcel Stork (Netherlands).
Modifications
in it's original laptop !! :)
Thnx again for your help !!
Le 27 septembre 2013 à 13:20, Nguyễn Minh Hoàng minhhoang1...@yahoo.com a
écrit :
Yes, you are so smart, buddy. I know you are not developer of these card
driver. But you got the way to make this card worked well. So i
:)
Also,
by the time I redo the patch,
You must have seen how i have reached this point,
I have actually started by insering the module with card=39 as an option,
So you can for now, add theses line to
gpunk@gpunk-Aspire-8930:~$cat /etc/modprobe.d/video-tv.conf
options tuner-xc2028
, but there
are so much code to do. I am on phone now. I will send you some more detail
when i am back to my computer. Pls help me.
Ps: i used option=39 before, my system got it as video and vbi device, not
dvb device. Maybe i need some patches in this case as your suggestion today.
Thank you
for your help !!
Le 27 septembre 2013 à 13:20, Nguyễn Minh Hoàng minhhoang1...@yahoo.com a
écrit :
Yes, you are so smart, buddy. I know you are not developer of these card
driver. But you got the way to make this card worked well. So i wrote to you.
I am not successful with your 306
Hi Samuel,
On Friday 02 August 2013 13:12:24 samuel.rasmus...@gdc4s.com wrote:
Hi,
I've been having problems getting the resizer to take its input from the
CCDC. From the linux-media mail-archive, it looks like Paul Chiha ran into a
similar problem in Oct 2011 with his message Help
Hi,
I've been having problems getting the resizer to take its input from the
CCDC. From the linux-media mail-archive, it looks like Paul Chiha ran
into a similar problem in Oct 2011 with his message Help with omap3isp
resizing. Paul had a patch at the end of the discussion, but even his
patch
Hi,
the maintainer contact for the cx231xx driver is broken - the author of that
driver is not reachable via the email adress stated in the source file:
srinivasa.de...@conexant.com
[ host cnxtsmtp1.conexant.com [198.62.9.252]: 550 5.1.1
srinivasa.de...@conexant.com: Recipient address
The 'help' section of the Kconfig entry for this driver is missing a couple of
extra spaces.
The effect is an error running 'make xconfig' (seen on the old 2.6.32 kernel
from Ubuntu 10.04 when compiling the latest media-build tree):
/lib/modules/2.6.32-46-generic-pae/build/scripts/kconfig/qconf
, not just
the previewer).
At first I thought the clocks were being disabled somehow, but tracking
them seems to indicate that's not the case. Adding an early return in
arch/arm/mach/omap2/clock.c omap2_dflt_clk_disable() (i.e. to disable
disabling of clocks) does NOT help.
What else might I
] dn_risci1* dn_sync*
Can anyone help? It is probably something simple, like the audio-mux/GPIO
settings, but I just can't find enough information to fix it myself or even
experiment!
Is there a way to control audio mux or GPIO explicitly from userspace, so I can
try to poke around to see if it's
I can't get the cx88-alsa driver to produce anything but loud noise (white
noise
or pink noise) from my FusionHDTV 5 Gold card. This problem has been reported
on
this list and elsewhere, but seemingly with no resolution, despite a LOT of
RTFM
and Googling. I have tried a variety of tools and
Help was missing during some items reorganization. Add them.
Signed-off-by: Mauro Carvalho Chehab mche...@redhat.com
---
drivers/media/i2c/Kconfig | 2 +-
drivers/media/parport/Kconfig | 5 -
drivers/media/pci/Kconfig | 3 +++
drivers/media/usb/Kconfig | 3 +++
4 files changed
in order to prevent these errors?
config DVB_CXD2820R
tristate Sony CXD2820R
depends on DVB_CORE I2C GPIOLIB
default m if DVB_FE_CUSTOMISE
help
Say Y when you want to support this frontend.
[crope@localhost linux]$ make silentoldconfig
scripts/kconfig/conf
i am afraid that i can not help. i am only a beginner on dvb coding.
2012/6/28 sam sakthi...@gmail.com:
Dear All,
Can any one help me on DVB Multiplexing using Mplex or caster.
Regards
sakthi
--
--
Regards
K.S.Sampath Kumar
Author for Book Understanding FOSS v 1.0 2.0 3.0c 3.0i
When tuner-xc2028 is not compiled as a module, dracut will
need to copy the firmware inside the initfs image.
So, use MODULE_FIRMWARE() to indicate such need.
Signed-off-by: Mauro Carvalho Chehab mche...@redhat.com
---
drivers/media/common/tuners/tuner-xc2028.c |2 ++
1 file changed, 2
On Tue, Jun 26, 2012 at 04:34:22PM -0300, Mauro Carvalho Chehab wrote:
When tuner-xc2028 is not compiled as a module, dracut will
need to copy the firmware inside the initfs image.
So, use MODULE_FIRMWARE() to indicate such need.
Signed-off-by: Mauro Carvalho Chehab mche...@redhat.com
---
Em 26-06-2012 17:44, Greg KH escreveu:
On Tue, Jun 26, 2012 at 04:34:22PM -0300, Mauro Carvalho Chehab wrote:
When tuner-xc2028 is not compiled as a module, dracut will
need to copy the firmware inside the initfs image.
So, use MODULE_FIRMWARE() to indicate such need.
Signed-off-by: Mauro
On Wed June 20 2012 08:19:40 Hans Verkuil wrote:
On 19/06/12 21:41, Peter Senna Tschudin wrote:
Full diff:
http://pastebin.com/BJS2EXcH
On Tue, Jun 19, 2012 at 4:39 PM, Peter Senna Tschudin
peter.se...@gmail.com wrote:
Hans,
I've:
[peter@ace tmp]$ diff
On 19/06/12 21:41, Peter Senna Tschudin wrote:
Full diff:
http://pastebin.com/BJS2EXcH
On Tue, Jun 19, 2012 at 4:39 PM, Peter Senna Tschudin
peter.se...@gmail.com wrote:
Hans,
I've:
[peter@ace tmp]$ diff linux-2.6.35.13/scripts/mod/file2alias.c
linux-3.4.3/scripts/mod/file2alias.c
And
Hi Peter and Hans,
On Wed, Jun 20, 2012 at 3:19 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 19/06/12 21:41, Peter Senna Tschudin wrote:
Full diff:
http://pastebin.com/BJS2EXcH
On Tue, Jun 19, 2012 at 4:39 PM, Peter Senna Tschudin
peter.se...@gmail.com wrote:
Hans,
I've:
[peter@ace
Hi all,
Yesterday I upgraded the gcc version I use to compile the daily build to 4.7.1.
This causes very strange errors when compiling 2.6.39 - 3.3:
FATAL: media_build/v4l/tuner: sizeof(struct i2c_device_id)=32 is not a modulo
of the size of section __mod_i2c_device_table=18.
Fix definition
Hi Hans,
On Tue, Jun 19, 2012 at 3:34 AM, Hans Verkuil hverk...@xs4all.nl wrote:
Hi all,
Yesterday I upgraded the gcc version I use to compile the daily build to
4.7.1.
This causes very strange errors when compiling 2.6.39 - 3.3:
FATAL: media_build/v4l/tuner: sizeof(struct
On Tue 19 June 2012 14:50:09 Ezequiel Garcia wrote:
Hi Hans,
On Tue, Jun 19, 2012 at 3:34 AM, Hans Verkuil hverk...@xs4all.nl wrote:
Hi all,
Yesterday I upgraded the gcc version I use to compile the daily build to
4.7.1.
This causes very strange errors when compiling 2.6.39 - 3.3:
Hans,
I've:
[peter@ace tmp]$ diff linux-2.6.35.13/scripts/mod/file2alias.c
linux-3.4.3/scripts/mod/file2alias.c
And found:
727a840
ADD_TO_DEVTABLE(i2c, struct i2c_device_id, do_i2c_entry);
This line only exists on 3.4.3 version of file2alias.c. Isn't this why
it successfully compile with newer
Full diff:
http://pastebin.com/BJS2EXcH
On Tue, Jun 19, 2012 at 4:39 PM, Peter Senna Tschudin
peter.se...@gmail.com wrote:
Hans,
I've:
[peter@ace tmp]$ diff linux-2.6.35.13/scripts/mod/file2alias.c
linux-3.4.3/scripts/mod/file2alias.c
And found:
727a840
ADD_TO_DEVTABLE(i2c, struct
On Tue, Jun 19, 2012 at 4:39 PM, Peter Senna Tschudin
peter.se...@gmail.com wrote:
Hans,
I've:
[peter@ace tmp]$ diff linux-2.6.35.13/scripts/mod/file2alias.c
linux-3.4.3/scripts/mod/file2alias.c
And found:
727a840
ADD_TO_DEVTABLE(i2c, struct i2c_device_id, do_i2c_entry);
FWIW, that macro
Hello,
Please could anyone try to assist with this problem with video capture after a
system upgrade?
I have a frame grabber that has 8 BT878 (or very similar) chips on one card,
also a V4L2 application that reads single frames from attached video cameras.
I was using this set-up successfully
Hi there!
I hacked a RDS TMC-message receiver to work on the serial port.
http://www.matthiasbock.net/wiki/?title=Kategorie:GNS_TrafficBox_FM9_RDS_TMC-Receiver
According to
http://linuxtv.org/wiki/index.php/Radio_Data_System_(RDS)
already several different receivers are available for usage
is crap software and should be replaced with something
different (and above all, not daemon based).
Is there someone, who would consider assisting me a little
in writing some documentation on the RDS daemon project,
some code maybe, lateron some linux kernel modules ?
I'd be happy to help
Hello dear all,
i have buy a DVB-S2 card from Tevii S471 and i need help to get it
running with
Debian Wheezy/Sid Kernel 3.2.0-2-686-pae.
The Tevii S471 was similar to the Tevii S470 but it has different LNB
control.
The first thing I have to use the s2-liplianin drivers unfortunately I
Hi again,
Hi,
On 2 February 2012 15:01, Fabio Estevam feste...@gmail.com wrote:
On 2/1/12, Guennadi Liakhovetski g.liakhovet...@gmx.de wrote:
Hello Gonzalo
On Tue, 31 Jan 2012, Fernandez Gonzalo wrote:
Hi all,
I've been working for a while with an iMX25PDK using the BSP
provided by
Hi Gonzalo,
On 2/10/12, Fernandez Gonzalo gfernan...@copreci.es wrote:
I've been finally able to attach the ov2640 camera in the i.MX25PDK.
I've had some problems with the clocks, but a quick dirty fix looks to
solve this issue (I'll work on cleaner solution later).
Great to know that you
Hello Gonzalo
On Tue, 31 Jan 2012, Fernandez Gonzalo wrote:
Hi all,
I've been working for a while with an iMX25PDK using the BSP provided by
Freescale (L2.6.31). The camera driver (V4L2-int) and examples do the
job quite well but I need to move my design to a more recent kernel.
I've been
Hi Guennadi,
Hello Gonzalo
On Tue, 31 Jan 2012, Fernandez Gonzalo wrote:
Hi all,
I've been working for a while with an iMX25PDK using the BSP
provided by
Freescale (L2.6.31). The camera driver (V4L2-int) and examples do
the
job quite well but I need to move my design to a more recent
On 2/1/12, Guennadi Liakhovetski g.liakhovet...@gmx.de wrote:
Hello Gonzalo
On Tue, 31 Jan 2012, Fernandez Gonzalo wrote:
Hi all,
I've been working for a while with an iMX25PDK using the BSP provided by
Freescale (L2.6.31). The camera driver (V4L2-int) and examples do the
job quite well
Hi,
On 2 February 2012 15:01, Fabio Estevam feste...@gmail.com wrote:
On 2/1/12, Guennadi Liakhovetski g.liakhovet...@gmx.de wrote:
Hello Gonzalo
On Tue, 31 Jan 2012, Fernandez Gonzalo wrote:
Hi all,
I've been working for a while with an iMX25PDK using the BSP provided by
Freescale
Hi all,
I've been working for a while with an iMX25PDK using the BSP provided by
Freescale (L2.6.31). The camera driver (V4L2-int) and examples do the
job quite well but I need to move my design to a more recent kernel.
I've been extensively googling but haven't found any info/examples about
how
Hi
I herbly please for assistance with x3m dvb-t tuner on linux. Let me know if
this device has any chance to work on linux.
I followed http://linuxtv.org/wiki/index.php/X3m_digital_S.A_HPC2000 without
success.
lspci output below
pdmainframe pd # lspci
00:00.0 RAM memory: nVidia Corporation
Hi,
I have a MythTV backend with a Hauppauge HVR-2250 (dual tuner,
ATSC?QAM, PCIe) and a Ceton InfiniTV4 (quad tuner, QAM/cable card,
PCIe). Over the weekend, I started intermittently seeing corrupt
recordings that were painful to watch.
I eventually narrowed the problem down to when both
On Mon, 2012-01-16 at 11:55 -0600, David Engel wrote:
Hi,
I have a MythTV backend with a Hauppauge HVR-2250 (dual tuner,
ATSC?QAM, PCIe) and a Ceton InfiniTV4 (quad tuner, QAM/cable card,
PCIe). Over the weekend, I started intermittently seeing corrupt
recordings that were painful to
help.
David
Regards,
Andy
Oh, the problem appear shortly after switching to the 3.1.9 kernel. I
also tried the 3.1.8 and 3.0.14 kernels to rule out software and there
was no effect on the problem.
David
--
To unsubscribe from this list: send the line unsubscribe linux-media
[mailto:dub...@crans.org]
Sent: mercredi 7 décembre 2011 00:05
To: sraill...@coexsi.fr
Subject: Tr. : Irdeto Cam Problem, any help
C'est pour toi ça.
--
Brice
- Forwarded message -
De : JULIAN GARDNER joo...@btinternet.com
Pour : linux-media@vger.kernel.org linux-media@vger.kernel.org
: 01
Info: CAM: CAM Application manufacturer: cafe
Info: CAM: CAM Manufacturer code: babe
Info: CAM: CAM Menu string: Irdeto Access
Now can anybody help with the -7 error, as i am getting no decryption.
Patches would be welcome, before i start trying to delve deeper in
joolz
--
To unsubscribe
Can I say a word to you guys?
Cool
I got one AVerMedia M792 PCIe Combo (OEM) on Ubuntu 11.10 and i wonder
if we can work it out, it is a pci-e and yes it is on the unsupported
list. but if we can work it out lets do it.
when i do a lspci -vv
it gives me this
03:00.0 Multimedia video
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
help
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
$ more channels.conf
CIII-HD:8500:8VSB:49:52+53:1
OTTAWA CBOFT-DT:18900:8VSB:49:53+52:3
CJOH:21300:8VSB:49:51+52:1
TVO:53300:8VSB:49:52+53:1
OTTAWA CBOT-DT:53900:8VSB:49:52+53:3
Télé-Québec_HD:56900:8VSB:49:52+53:3
CHOT:62900:8VSB:49:52:3
$ azap -c channels.conf
On Thu, Oct 13, 2011 at 2:14 PM, James bjloc...@lockie.ca wrote:
$ more channels.conf
CIII-HD:8500:8VSB:49:52+53:1
OTTAWA CBOFT-DT:18900:8VSB:49:53+52:3
CJOH:21300:8VSB:49:51+52:1
TVO :53300:8VSB:49:52+53:1
OTTAWA CBOT-DT:53900:8VSB:49:52+53:3
On 10/13/11 14:30, Devin Heitmueller wrote:
On Thu, Oct 13, 2011 at 2:14 PM, Jamesbjloc...@lockie.ca wrote:
$ more channels.conf
CIII-HD:8500:8VSB:49:52+53:1
OTTAWA CBOFT-DT:18900:8VSB:49:53+52:3
CJOH:21300:8VSB:49:51+52:1
TVO:53300:8VSB:49:52+53:1
OTTAWA
:0 [YUYV8_2X8], CCDC:1 [YUYV8_1X16], resizer:0
[YUYV8_1X16]
--
Regards,
Laurent Pinchart
Thanks for your help. I've updated ispccdc.c to support the _1X16 codes
and the pipeline seems to work now. However, I needed to take out the
memcpy in ccdc_try_format(), because otherwise pad
On Wed, Oct 5, 2011 at 12:54 PM, Sakari Ailus sakari.ai...@iki.fi wrote:
On Wed, Oct 05, 2011 at 01:51:29PM +1100, Paul Chiha wrote:
Thanks for your help. I've updated ispccdc.c to support the _1X16 codes
and the pipeline seems to work now. However, I needed to take out the
memcpy
On Wed, Oct 05, 2011 at 03:09:48PM +0200, Enrico wrote:
On Wed, Oct 5, 2011 at 12:54 PM, Sakari Ailus sakari.ai...@iki.fi wrote:
On Wed, Oct 05, 2011 at 01:51:29PM +1100, Paul Chiha wrote:
Thanks for your help. I've updated ispccdc.c to support the _1X16 codes
and the pipeline seems to work
On Wed, Oct 5, 2011 at 3:42 PM, Sakari Ailus sakari.ai...@iki.fi wrote:
On Wed, Oct 05, 2011 at 03:09:48PM +0200, Enrico wrote:
On Wed, Oct 5, 2011 at 12:54 PM, Sakari Ailus sakari.ai...@iki.fi wrote:
On Wed, Oct 05, 2011 at 01:51:29PM +1100, Paul Chiha wrote:
Thanks for your help. I've
.
Sure, sensor drivers should not be modified. What I was talking
about was to configure the pipeline as
sensor:0 [YUYV8_2X8], CCDC:0 [YUYV8_2X8], CCDC:1 [YUYV8_1X16],
resizer:0 [YUYV8_1X16]
--
Regards,
Laurent Pinchart
Thanks for your help. I've updated ispccdc.c
Hi Paul,
On Monday 03 October 2011 07:51:34 Paul Chiha wrote:
Hi,
I've been having trouble getting the resizer to work, and mainly because
I don't know how to correctly configure it.
I'm using kernel 2.6.37 on arm DM37x board.
I've been able to configure the media links
Hi Ivan,
On Tuesday 04 October 2011 13:46:32 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:03 +0200, Laurent Pinchart wrote:
On Monday 03 October 2011 07:51:34 Paul Chiha wrote:
Hi,
I've been having trouble getting the resizer to work, and mainly
because I don't know how to
Hi Ivan,
On Tuesday 04 October 2011 13:54:12 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:50 +0200, Laurent Pinchart wrote:
On Tuesday 04 October 2011 13:46:32 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:03 +0200, Laurent Pinchart wrote:
On Monday 03 October 2011 07:51:34 Paul
Hi Laurent,
On Tue, 2011-10-04 at 15:00 +0200, Laurent Pinchart wrote:
Hi Ivan,
On Tuesday 04 October 2011 13:54:12 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:50 +0200, Laurent Pinchart wrote:
On Tuesday 04 October 2011 13:46:32 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:03
On Tue, Oct 04, 2011 at 03:00:55PM +0200, Laurent Pinchart wrote:
Hi Ivan,
Hi all,
On Tuesday 04 October 2011 13:54:12 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:50 +0200, Laurent Pinchart wrote:
On Tuesday 04 October 2011 13:46:32 Ivan T. Ivanov wrote:
On Tue, 2011-10-04 at 13:03
to modifying exiting drivers.
Sure, sensor drivers should not be modified. What I was talking about was to
configure the pipeline as
sensor:0 [YUYV8_2X8], CCDC:0 [YUYV8_2X8], CCDC:1 [YUYV8_1X16], resizer:0
[YUYV8_1X16]
--
Regards,
Laurent Pinchart
Thanks for your help.
I've updated
Hi,
I've been having trouble getting the resizer to work, and mainly because
I don't know how to correctly configure it.
I'm using kernel 2.6.37 on arm DM37x board.
I've been able to configure the media links sensor=ccdc=ccdc_output
(all with 640x480 V4L2_MBUS_FMT_UYVY8_2X8) and VIDIOC_STREAMON
the latest s2-liplianin and v4l-dvb mantis drivers but no joy
Can anyone help?
szap2 needs a list of channels in zap or vdr format to tune correctly,
so try this:
szap2 -c your-szap-s2-channel-list-including-BBC HD BBC HD
gathering the list using scan-s2 should work like this:
scan-s2 -s [DISEQC
and v4l-dvb mantis drivers but no joy
Can anyone help?
John
output lspci -vv
01:08.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV
PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Device 1ae4:0003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr
you think this help message is useful? It's clear to
everybody that if one eventually disables it it will be disabled. The
help message should mention _what_ the network support is.
I would send a patch, but I really have no idea what's that good for.
thanks,
--
js
--
To unsubscribe from this list
On Thursday 16 June 2011 09:06:59 Jiri Slaby wrote:
I would send a patch, but I really have no idea what's that good for.
DVB network support is referring to the IP stack. This option is set to N
when compiling the Linux DVB stack on systems without IP networking.
Please submit a patch if you
is set to N.
If unsure say Y.
Why do you think this help message is useful? It's clear to
everybody that if one eventually disables it it will be disabled. The
help message should mention _what_ the network support is.
I would send a patch, but I really have no idea what's
On Saturday 28 May 2011 10:33:16 Bjørn Mork wrote:
Marc Coevoet ma...@dommel.be writes:
Op 27-05-11 21:48, Willem van Asperen schreef:
a) CAM support is currently not implemented for terratec HD
For all cards?
The CA code in the mantis driver isn't actually hooked into the driver
Willem van Asperen wil...@ereprijs.demon.nl writes:
Actually, doing this on s2-liplianin-41388e396e0f (the one I downloaded
today)
gets:
$ grep mantis_ca_init *.c
mantis_ca.c:int mantis_ca_init(struct mantis_pci *mantis)
mantis_dvb.c: mantis_ca_init(mantis);
And in the function
On Sunday 29 May 2011 14:11:23 Bjørn Mork wrote:
Willem van Asperen wil...@ereprijs.demon.nl writes:
Actually, doing this on s2-liplianin-41388e396e0f (the one I downloaded
today) gets:
$ grep mantis_ca_init *.c
mantis_ca.c:int mantis_ca_init(struct mantis_pci *mantis)
mantis_dvb.c:
Marc Coevoet ma...@dommel.be writes:
Op 27-05-11 21:48, Willem van Asperen schreef:
a) CAM support is currently not implemented for terratec HD
For all cards?
The CA code in the mantis driver isn't actually hooked into the driver
anywhere, so that't correct: No CAM will currently work with
101 - 200 of 342 matches
Mail list logo
