Hallo,
for some weeks I have change the boot of thinclients to ltsp and fuse.
I have debian sarge at the server an clientimage. The kernel for the clients
is 2.6.18. Now I it is a problem with the ide-cdroms. The ruleset
10-ltsp-ide.rules for udev want use a program ide_media to start
Try using one from DLINK. That's less problematic..Compex or intex
RTL8139D is really BAD.
Thanks regards
Ashish Nabira
Sun Microsystems
Ph: +91 80 66930854
Work is worship.
Daniel Mealha Cabrita wrote On 12/13/06 02:33,:
In this lspci case I believe what happens is what once a
That's really hard. I tried 2 ROMs from that site , none worked. So what
I did is , copied boot rom from one working card and using it with DLINK
RTL8139, It's working fine.
Now a days , I started using 3COM or Intel cards with biult in PXE 2.0
BOOT ROM. That's best to work with.
Thanks
Hi list,
- I've got a little sound problem on our new SuSE10.1 (SUN hardware) server
with LTSP4.2u4.
- if we open a shell in a client session and wishes to connect to the MS-W2003
terminal server in a FULL SCREEN session and using -r sound:local then we
get sound, all is ok.
- if we open a
I've been using one as a LTSP terminal for a couple of days now. Audio support
was available in 4.2. I'm running my display at 1280x1024x16.
The X server is noticeably slower on the MicroClient [MC] than the Diskless
Workstation [DW] 150. The processor speed is 200MHz on the MC compared to
Hi Monica;
I had a similar problem but wasn´t with CD-ROMs devices;
If u load the module manually after boot does that work?
Hallo,
for some weeks I have change the boot of thinclients to ltsp and fuse.
I have debian sarge at the server an clientimage. The kernel for the
clients
is
we have 3 different servers running P4 3.2 GHz with 2 GB ram, sata2 160 GB
Harddisks
( 3 different labs of 20 clients, each ) clients are P1 166 with 64MB ram.
the clients run KDE with Opera (or Firefox 2) and Open Office
2.0.4beautifully :-)
we bought them a year and a half ago, so i guess we
Hello, I used LTSP once in the past, and am trying to setup a new server. I
am running everything in VMware virtual machines before deploying to our
real hardware.
I am using CENTOS 4.4 for the server.
I have followed the installation instructions, and all appears to be ok.
When I boot my
Lauro-
You won't be able to format the floppy from the server, since it is
essentially a network share, not a low-level device. It would be the same
if you tried to format a network share via SMB or NFS. You'll need to run
the formatting program on the local terminal itself. You can script
I had NeoWare thin client here (the one with the embedded display), and ran
into the same problem. No mater what I did, I could not get X to show up on
the display (DVI or CRT).
I did have a shell screen and tried to start X manually there. After days
of troubleshooting, I still recieved no
If you are referring to the language settings on the server, the LANG and
LANGUAGE variables are generally set in a text file in /etc. For debian
systems, I believe this is set in /etc/environment and Redhat systems it
used to be in /etc/sysconfig/i18n. You can search for this with 'grep -r
The Ebox is made by a company in Taiwan and Norhtec is reselling the
eBox under a different name with their own software.
There are also more powerful units available (Up to 1.2GHz, fan-less)
http://www.compactpc.com.tw/
Our company (Business Data Solutions) is the distributor for the eBox in
I just received mine after 6 weeks. It was shipped direct from the
manufacturer over seas.
It arrived without documentation. Can anyone tell me how to invoke
PXE during the bios post?
Jason
On Dec 5, 2006, at 8:50 PM, Sudev Barar wrote:
On 06/12/06, Roy Souther [EMAIL PROTECTED]
Hi all;
I use that chipset since the A version with the Allied Telesyn (and
generics) NICs.
Since the rtl8139, 8139too and 8139cp cards that all works fine until
the last chipset (8139D-b (some last series)) which doesnt uses that
driver anymore.
The last 4 of that card that I got run with
I get errors NFS Error:Permission denied
/ect/dhcp3/dhcpd.conf
ddns-update-stylenone;
default-lease-time 21600;
max-lease-time 21600;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.0.255;
option routers
On 13/12/06, Roy Souther [EMAIL PROTECTED] wrote:
This system is smokin' fast! I have two more servers like this that my
clients use one runs an entire TV station with video processing software and
the other is Linux desktops only for about 200 students and staff in a
school.
Roy,
Is that
The Ebox is made by a company in Taiwan and Norhtec is reselling the
eBox under a different name with their own software.
There are also more powerful units available (Up to 1.2GHz, fan-less)
http://www.compactpc.com.tw/
All models work well LTSP, although there where some issues with the
On Thu, Dec 14, 2006 at 09:33:50AM +0100, Monika Strack wrote:
Hallo,
for some weeks I have change the boot of thinclients to ltsp and fuse.
I have debian sarge at the server an clientimage. The kernel for the clients
is 2.6.18.
I'm assuming you're using ltsp-4.2. If so, then 2.6.18 isn't
On 12/12/06, Jason Chase [EMAIL PROTECTED] wrote:
I just received mine after 6 weeks. It was shipped direct from the
manufacturer over seas.
It arrived without documentation. Can anyone tell me how to invoke PXE
during the bios post?
Press del on boot and from BIOS enable LAN boot.
--
Thanks, I didn't read that before, it's not a device, a network share.
I'll won't have to worry, since students can and will keep formating the
boot floppies, those machines don't have PXE, but your ideas may be
useful on other labs I manage, I' write them down. I'll leave teacher's
machine to
There are about 60 or so terminals in the school. From time to time they
are all in use but most of the time there is maybe 10 or so people
logged in. All sessions use ViceWM so their sessions stay active while
they are logged out. http://www.silicontao.com/software/ViceWM/
Flash is a big problem
I just ordered four of these also. I am using some other embedded PXE
systems and they did not show it at boot time but Shift+F10 gets me into
the PXE BIOS setup. From there I can make PXE boot the default, enable
or disable and turn on the PXE BIOS boot message.
Can you please try Shift+F10 and
Hello Marcel,
Op maandag 11 december 2006 16:33, schreef Marcel Berteler:
The Ebox is made by a company in Taiwan and Norhtec is reselling the
eBox under a different name with their own software.
There are also more powerful units available (Up to 1.2GHz, fan-less)
23 matches
Mail list logo
