Due to time constraints as I am the only IT guy around at my job, I
have just got a cron job to restart the LTSP server ay 7am each
weekday, thus solving the TFTP problem (well I've just put it off
really!)
Stephen
On 3 Mar 2004, at 8:35 pm, Hedemark, Magnus wrote:
Stephen Berry [m
On 3 Mar 2004, at 8:35 pm, Hedemark, Magnus wrote:
Stephen Berry [mailto:[EMAIL PROTECTED] said:
I am running LTSP 3 on RedHat 7.1. Every so often, my
terminals refuse
to boot and I don't know why! They get their IP address and
then do the
whole "loading 10.22.67.25/tftpboot/vmlinuz.lt
:
Am Mittwoch, 3. März 2004 20:00 schrieb Stephen Berry:
Hi,
I am running LTSP 3 on RedHat 7.1. Every so often, my terminals
refuse
to boot and I don't know why! They get their IP address and then do
the
whole "loading 10.22.67.25/tftpboot/vmlinuz.ltsp..." but the loading
dots app
Hi,
I am running LTSP 3 on RedHat 7.1. Every so often, my terminals refuse
to boot and I don't know why! They get their IP address and then do the
whole "loading 10.22.67.25/tftpboot/vmlinuz.ltsp..." but the loading
dots appear very slowly, and the machine never boots. It is very
frustrating,
Shouldn't your export be to 192.168.3.10 for the terminal?
Stephen
On 22 Dec 2003, at 2:53 pm, Felipe Scuciatto dos Santos wrote:
No, it isn't a via chipset its a realtek
my /etc/exprots:
/opt/ltsp/i386
192.168.3.0/255.255.255.0(ro,no_root_squash,sync)
/var/ltsp/swapfiles
192.168.3.0/255.255.25
Hi,
I have a strange problem with one of my clients. Sometimes it boots up
perfectly, sometimes it panics with a segmentation fault half way through
boot up, some times it says it doesnt get it's hostname passed to it and
stops, and just now it says that It can't mount it's filesystem with NFS as
I have had this error before, and it was due to either a bad floppy drive or
bad floppy disk.
Stephen
- Original Message -
From: "Tarjei Huse" <[EMAIL PROTECTED]>
To: "Josiah Ritchie" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, February 26, 2003 5:17 PM
Subject: Re: [Ltsp
Hi,
I have noticed that my terminals are picking up the US keyboard settings
rather than the UK settings.
Where do I change this?
Thanks,
Stephen
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Some
These machines are fine for a diskless linux environment! (a P100/16 with
2Mb video is good enough, possible with 486-66/12 with 512k video!)
As the other guy said, you will need a netowrk card and either a floppy
drive or a boot rom on the network card to boot from. Its also simple to
boot from a
Hi,
Where would I find a dummy's guide to setting up sound on a workstation?
Thanks,
Stephen
---
This SF.net email is sponsored by: Scholarships for Techies!
Can't afford IT training? All 2003 ictp students receive scholarships.
Get hands-on
Hi,
I have a workstation (486 66MHz/16Mb/ne 10Base T card) which will not
complete the boot process. I get the following message...
--
Running /linuxrc
Mounting /proc
Linuxrc: Installing the 8390 module
Using /lib/modules/net/8390.o
insmod: not
Hi,
I have a workstation (486 66MHz/16Mb/ne 10Base T card) which will not
complete the boot process. I get the following message...
--
Running /linuxrc
Mounting /proc
Linuxrc: Installing the 8390 module
Using /lib/modules/net/8390.o
insmod: not an ELF fi
You need to tell your server to accept remote syslogd writing. I believe its
in the docs.
You need to add -r to something to make it allow the remote connections but
I cant remember what it is!
Its a common thing so someone on here should be able to tell you.
Stephen
- Original Message -
Hi,
I have set up a jetdirect printer on my LTSP server. How do I set this up in
Open Office?
I am running RH 7.1, LTSP 3.0.1 and the printer is a Kyocera FS 680
connected to an HP Jet Direct 170x on 10.22.64.86.
Thanks,
Stephen
---
This sf.n
Kim,
If you are stuck, you may need to use the XF86_SVGA driver with a
modeline. Let me know and I can point you in the right direction.
Stephen
On Friday, November 8, 2002, at 07:10 pm, Kim Leandersson wrote:
Hello again!
First I would like to thank all of you who already helped me before.
Hi,
Go to this site:
http://www.dkfz-heidelberg.de/spec/linux/modeline/
and choose your resolution you want, and the refresh rate, and it will give
you a modeline for you display. In lts.conf you put
X_MODE_0 = "put the modeline here without quotes"
And that should work. I have to set a mod
-Which distribution do you have on your server? In Red Hat 7, you need
-to install the ucd-snmp and ucd-snmp-utils rpms. The names have changed
-in Red Hat 8, but the packages still have snmp in the name, so they
-shouldn't be hard to find.
-David
I have redhat 7.1.
Are these rpms on the Redh
Hi,
Our school has just purchased some network management software (Solarwinds).
My LTSP server does not respond to SMNP requests. How do I enable SNMP so I
can get info from my LTSP server?
Thanks,
Stephen
---
This sf.net email is sponsore
Hi,
I have an iBook which runs OS X (based on unix). Now, if i want to get a log
in screen from my LTSP server on it, what do I have to type at it's terminal
prompt.
I believe its something along the lines of "query "
Hope someone can tell me the right syntax to try!
Thanks,
Stephen
-
Hi,
I have ltsp 3.0 on RH 7.1.
I have just tried to unpack a tarball archive on my server, which would copy
some files into /opt. It gave an error tellimg me that the disk is full.
Doing the "df" command shows that indeed / is used 100% (it has a few kb
free). Now when I have rebooted the server
Hi,
Just remember that GIMP has problems on machines running ATI rage grapics
cards. My HP server has one and it killed it!
Stephen
- Original Message -
From: "John_Cuzzola" <[EMAIL PROTECTED]>
To: "Farly" <[EMAIL PROTECTED]>
Cc: "ltsp-discuss" <[EMAIL PROTECTED]>
Sent: Thursday, August
Did you restart dhcpd??
stephen.
On Sunday, August 18, 2002, at 02:17 pm, Simone Tommasi wrote:
>It looks to me, from your hosts file, that your server has an ip address of 192.168.0.0, which is an invalid address. Double check the ip address for the server and update your hosts file and
hi,
192.168.0.0 is not a valid IP address. You cannot use .0 or .255 in the
last quad as these define networks and broadcast addresses.
Stephen
On Sunday, August 18, 2002, at 12:37 pm, Erick S. Tyack wrote:
> Simmone,
>
> It looks to me, from your hosts file, that your server has an ip addres
Hi there,
I am using Xmanager to connect to my LTSP server and run a graphical LTSP
session on my Windoze PC. Does anyone know of something similar that will
let you do the same for MacOS? I guess im looking for an X server for Mac
OS.
Hope someone can help!
Thanks,
Stephen
-
As its now a thin client, just logout and switch off.
Stephen
---
This sf.net email is sponsored by: Dice - The leading online job board
for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.com/seeker.epl?rel
I believe the problem is that you have a Windows NT server or 2000 server on
your network running unrestricted DHCP. This it usually what causes the
terminal to pick up "server 0.0.0.0 loading: 0.0.0.0/tftpboot/kernel"
There are a few options:
1) plug a crossover cable into the server's netcard,
Hello,
I have set up LTSP 3.0.4 /RH 7.2. My workstation boots but ends up with the
grey screen with the big X.
I have read the docs,
/etc/inittab contains "x:5:respawn:/etc/X11/prefdm -nodaemon"
netstat -ap | grep xdmcp gives this.
"udp17280 *:xdmcp*:*1491/gdm"
"SERVER="
Hi,
I have just upgraded my school's installation onto a new server with ltsp
3.0.4 and redhat 7.2
(from ltsp 3.0.0 RH 7.1)
I backed up dhcpd.conf, exports, hosts.conf and lts.conf from the old server
and copied them to the correct place on the new server expecting things to
work.
We had severa
Hi there,
I am installing LTSP on a brand new server today for our school. I want to
run open office but could some one tell me where to install it? Should it be
put in the /opt/ltsp/i386...area?
Thanks,
Stephen
---
This sf.net emai
Hi there,
What video cards support the LPP?
I cant seem to get it working. I have LTSP 3.0 Kernel 2.4.9. How can I get
the progress bar picture to display while booting?
Thanks,
Stephen
---
This sf.net email is sponsored by:ThinkGeek
Welcome
Hi,
Does anyone know of an Xserver for the Macintosh that will allow me to use
my LTSP server on a Mac? I have Xmanager for the PC but do not know of
anything for the Mac.
Any help would be great.
Many thanks,
Stephen Berry
---
This sf.net
Try Xmanager, its a very good xserver for windows.
stephen
- Original Message -
From: "vcare" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Jim McQuillan" <[EMAIL PROTECTED]>
Sent: Thursday, July 18, 2002 7:45 AM
Subject: [Ltsp-discuss] A THOUGHT.
> I am a regular user of LTSP, and
It is possible to have 2 DHCP servers on one segment. That is what we are
doing here. Our Win2k server hands out fixed DHCP addresses which means that
each client will always have the same IP address. Any unused IPs are locked
out so that they cannot be used. The LTSP server also dishes out IPs to
You could force a particular resolution by specifying a modeline in
LTS.CONF.
Let me know if you need to know how.
Stephen
- Original Message -
From: "Alessandro Selli" <[EMAIL PROTECTED]>
To: "LTSP List" <[EMAIL PROTECTED]>
Sent: Tuesday, July 02, 2002 9:11 PM
Subject: Re: [Ltsp-disc
We have a few terminals running this video card.
You will need to specify a Modeline in lts.conf.
I can email you mine if you prefer
Stephen
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
___
Hello,
I am using LTSP v3 on RH7.1 and my terminal machines run the Citrix ICA
client on boot up. Using the sound package from the LTSP contrib pages, is
it possible to have sound on the Citrix ICA client or would that not work?
Thank you,
Stephen
-
The snooping facility is very useful in schools when teachers may want to
see what a student is accessing. That way you catch them out if they are
doing things they shouldnt!
- Original Message - right to terminate here. on appeal too, if
memory serves.
> Distasteful to the max, but very l
Hi,
I've been trying to set up LTSP on some Apple PPCs. I recieved a message
last week that someone had ported LTSP to the Sparc platform and was willing
to help me with my Apple Macs, but I deleted the email and dont know who it
was!
If it was you can you mail me back please!
Thank you,
Stephe
> Hi,
>
> I've been e-mailing Skip Gaede about LTSP and Apple PowerPCs.
Unfortunately our
> network cards in out Macs aren't supported by his kernel. I was wondering
> what I would need to know in order to add support for them if I modified
his
> kernel. Also how do you recompile a kernel?! and
Calling all Apple + LTSP gurus!!
Hi,
We have a small setup of 30 LTSP terminals at our school which are
486/pentium boxes all booting from floppy disk. We also have a room of 33
Apple Macintosh Performa 5260 PowerPC computers which are beginning to show
their age. I was wondering if anyone here
Thanks to those who helped with my reboot question.
Stephen
___
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
Hi,
I would like to have my LTSP server reboot once per week automatically.
I understand that I can use Cron to perform this but I don't know what to
put in my crontab file to make this happen!
Could someone tell me the script please??
Many Thanks,
Stephen
I have a brand new Toshiba Satellite laptop with a Trident 16Mb graphics
card built in. I get the same messages and have tried various settings in
lts.conf. It also says i have 512k of video ram, even though its a 16Mb
card.
-
Hi,
Does anyone know if there is a way to connect to an LTSP server from a
Windoze 98 machine, so that you can use linux whilst still using Windoze?
Stephen
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto
Hi,
I have a couple of redhat boxes with the OS installed on the hard disk. If I
want them to get their IP via dhcp off my LTSP server would i just set the
IP and MAC addresses in dhcpd.conf? How would i stop it using "option
root-path" or would it ignore that line?
Sorry if its a silly question
Thanks!
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
Hi there,
Is there any way for me to see what processes are
running on my ltsp server and find out how much memory/cpu is being used like on
Windoze Task manager?
I have LTSP 3.0 and Redhat 7.1
Thanks,
Stephen
Hi there,
Does anyone know if there is a HowTO anywhere which describes how to set up
Apple Macintosh PowerPCs as LTSP terminals? I'm quite new to all this so any
help would be great.
Thanks in advance,
Stephen
_
Ltsp-discuss
> Hi,
>
> I have an LTSP setup at my school. We have some 486s which have 1Mb Cirrus
Logic
> GD5428 graphics on board, and also some Trident TVGA 9000 512K ISA cards.
I have my
> X server set to XF86_SVGA in my lts.conf file, but my terminal gives an
> error like
>
> ***Device found but display
Hi,
I have an LTSP setup at my school. We have some 486s which have Cirrus Logic
GD5428 cards on board, and also some Trident TVGA 9000 512K cards. I have my
X server set to XF86_SVGA in my lts.conf file, but my terminal gives an
error like
***Device found but display mode cannot be resolved***
Hi,
Does anyone know if it's possibe to boot LTSP from the hard disk, instead of
boot ROMS or floppy? If anyone has any ideas it'd be great to hear from you.
Stephen
_
Ltsp-discuss mailing list. To un-subscribe, or change
Hi,
I have a problem with my RHL 7.1 ltsp server. I
get the message "cannot open
romote file handle on 10.22.64.62" on the
workstation then it goes to a grey
screen with the big X shaped cursor.
10.22.64.62 is the IP of my server.
Any ideas?
Thanks,
Stephen
___
Hi there,
Does anyone know what starts X? I need to start X on my workstation but not
start the login screen. Any ideas??
Stephen
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.s
Hello,
I wonder if anyone can help me...
I am running Redhat 7.1 and LTSP 3.0. I need to automatically launch an
application on start up. This application (citrix ICA Client) will be the
only one used on my system. Secondly, the users must not see the gnome
desktop/login (I work in a school and
Hi there,
Is it possoble to get the X application run on startup to cycle round, so
that when it drops out, it will start up again?
Stephen
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://l
Hi there,
Does anyone have any ideas as to how to set-up a diskless workstation so
that
it boots from my Redhat 7.1 LTSP server, then will run the Citrix ICA
application on start-up?... So it appears as if its booting directly into
Windows 2000? I know that it has been done and was wondering if
Hi,
Does anyone have any ideas as to how to setup a
diskless worstation so that it boots from my LTSP server, then will run the
Citrix ICA application on startup?? So it appears as if its booting directly
into Windows 2000?
Please help!!
Stephen
Hi,
Does anyone know how to specify ISA graphics card??
I know PCI ones are auto detected, but I have no idea as to how to get ISA cards
working!
Hope someone can help
S Berry
Hi,
I have an LTSP server running Redhat7.1 and a
couple of diskless Pentium machines.
I boot the machines in runlevel 3, but
was wondering how I can then get them to load X and go straight into the
ICA client??
I don't know much about Redhat and ltsp, any help
would be greatly appreciate
59 matches
Mail list logo