On 03-Nov-99 Lars Gullik Bjønnes wrote:
>
> Also note that the XForms libarary version 0.89 is NOT stable and you
> might experience problems (i.e. crashes) if you use it with LyX.
GOOD!!! #:O)
Greets Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vig
On 03-Nov-99 Peter Lundqvist wrote:
> Your'e right about that.
> And I did check that it was in the searchpath, and I did run ldconfig.
> Hence it should compile, but it didn't.
> I got unresolved references to fl_calloc etc..
What version of xforms do you have installed?
Attention that 0.89 w
On 03-Nov-99 Lars Gullik Bjønnes wrote:
> Regarding the Custom-Export->Html, I don't think this is important
> enough to wait for. Any way I hope to have a 1.1.3 ready by the end of
> the month, and we will have it by then.
Agreed!
Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Jean-Marc Lasgouttes wrote:
>
> > "Garst" == Garst R Reese <[EMAIL PROTECTED]> writes:
>
> Garst> This could be a user error, but here's what happend. Alice
> Garst> wanted a listing with page numbers of her cookbook recipes
> Garst> showing the recipe name and the contributor. The recipe na
William Brodie-Tyrrell wrote:
>
> Sorry, no backtrace, I don't have an unstripped copy. This problem occurs on
> Solaris x86 (haven't tried other architectures) whenever I close the Figure
> options window in 1.0.3.
I'm not your highest level expert, but these problems usually come from
an incom
Sorry, no backtrace, I don't have an unstripped copy. This problem occurs on
Solaris x86 (haven't tried other architectures) whenever I close the Figure
options window in 1.0.3.
The options are for a 70kB postscript file of a VLSI layout. I have it set to
color, 100% of the page width. The se
Mate Wierdl <[EMAIL PROTECTED]> writes:
| > If not the msg's will get diferent msgid's and that is worse.
|
| Why is it worse? The message id is not looked at by any of the archiving
| software.
But most decent mailreaders do.
And the archiving software should use msgid's to follow threads...
On Wed, Nov 03, 1999 at 05:48:32PM +0100, Lars Gullik Bjønnes wrote:
> Mate Wierdl <[EMAIL PROTECTED]> writes:
>
> | Until I work this out with the web archive maintainer, please do not
> | crosspost.
>
> I can asure you that I will continue to crosspost...
I started to worry you would not.
>
On Wed, Nov 03, 1999 at 08:00:27PM +0100, Lars Gullik Bjønnes wrote:
>
> This release is a minor update to 1.1.1 that fixes the bugs found there.
>
> [...]
>
> Also note that the XForms libarary version 0.89 is NOT stable and you
> might experience problems (i.e. crashes) if you use it with LyX.
This release is a minor update to 1.1.1 that fixes the bugs found there.
- crash when using fax
- cheaders included
- the '-' vs. '_' should be gone.
- the export to html should be a little better
- + some additional bugfixes
The 1.1.x series are moving t
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| Lars> I change all the callers (the other compare members in
| Lars> lyxstring) to pass a c_str() instead.
|
| It is fine now (I only see the usual reads in Xlib or libc that we
| cannot avoid).
Good. Expect 1.1.2 within the hour.
Lgb
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Ok I see the error...
Lars> I change all the callers (the other compare members in
Lars> lyxstring) to pass a c_str() instead.
It is fine now (I only see the usual reads in Xlib or libc that we
cannot avoid).
JMarc
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| I tried to run purify on latest cvs and got a bunch of Uninitialized
| memory read in lyxtring.C, like the one appended. My guess is that s
| does not point to a null terminated string (is it supposed to?).
It is required to.
I don't think thi
Mate Wierdl <[EMAIL PROTECTED]> writes:
| Until I work this out with the web archive maintainer, please do not
| crosspost.
I can asure you that I will continue to crosspost...
If not the msg's will get diferent msgid's and that is worse.
Lgb
I tried to run purify on latest cvs and got a bunch of Uninitialized
memory read in lyxtring.C, like the one appended. My guess is that s
does not point to a null terminated string (is it supposed to?).
Lars, can you have a look? You know the code better than I do...
JMarc
UMR: Uninitia
On Wed, Nov 03, 1999 at 10:18:31AM -0600, Mate Wierdl wrote:
> Investigating why JM's announcement of 1.1.1 did not get archived at
> the web archive, I noticed that in fact no crossposts got to the
> archive---such as the 1.1.2pre rpm announcements. The problem is
> definitely on the web archive
Investigating why JM's announcement of 1.1.1 did not get archived at
the web archive, I noticed that in fact no crossposts got to the
archive---such as the 1.1.2pre rpm announcements. The problem is
definitely on the web archive end, since our list manager's archive
has all the messages, and my m
Investigating why JM's announcement of 1.1.1 did not get archived at
the web archive, I noticed that in fact no crossposts got to the
archive---such as the 1.1.2pre rpm announcements. The problem is
definitely on the web archive end, since our list manager's archive
has all the messages, and my m
JM
Not too sure what yiou wanted so I've included extracts from my /etc/printcap
and ~/.lyx/lyxrc below.
> Ben> Using Lyx 1.1.2pre1 RPM from Kayvan. The print spool command no
> Ben> longer works.
>
> Ben> In my lyxrc I have \print_spool_command "lpr -h"
>
> Ben> I need to have this flag to st
> "Ben" == Ben Cazzolato <[EMAIL PROTECTED]> writes:
Ben> Using Lyx 1.1.2pre1 RPM from Kayvan. The print spool command no
Ben> longer works.
Ben> In my lyxrc I have \print_spool_command "lpr -h"
Ben> I need to have this flag to stop the annoying banners being
Ben> printed. It used to work w
Peter Lundqvist <[EMAIL PROTECTED]> writes:
| > As far as I know, /usr/lib is always in the search path by default. If
| > the library is not found, you probably have to run "ldconfig" (or some
| > equivalent command depending on your system.
| Your'e right about that.
| And I did check that it
On 3 Nov 1999, Jean-Marc Lasgouttes wrote:
> > "Peter" == Peter Lundqvist <[EMAIL PROTECTED]> writes:
>
> Peter> In lyx-1.0.4/src/Makefile I miss a path to the xforms library.
> Peter> On line 54 I whish that -L/usr/X11R6/lib would be continued
> Peter> with :/usr/lib , since that's where th
Using Lyx 1.1.2pre1 RPM from Kayvan.
The print spool command no longer works.
In my lyxrc I have
\print_spool_command "lpr -h"
I need to have this flag to stop the annoying banners being printed. It used
to work with 1.0.4.
Any ideas???
Ben
> "Garst" == Garst R Reese <[EMAIL PROTECTED]> writes:
Garst> This could be a user error, but here's what happend. Alice
Garst> wanted a listing with page numbers of her cookbook recipes
Garst> showing the recipe name and the contributor. The recipe names
Garst> were already Subsections, so I
> "Andrzej" == Andrzej Jaworski <[EMAIL PROTECTED]> writes:
Andrzej> Hi, My system: uname -a Linux p109 2.2.12 #1 SMP, i686 ,
Andrzej> Debian potato.
Hello,
Could you tell us what gcc version you use? And what libstdc++
version?
Andrzej> In function `DebugStream::DebugStream(int, Debug::t
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| No, a config.h was not included in DebugStream.C (or rather, it was
| included *after* LString.h).
We could of course include config.h from LString.h as well.
But I'd rather have it in the C files to avoid too much include file
searching and op
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes: |
Lars> > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes: | |
Lars> Lars> Yes, I know. I think no.po is the only one that has been
Lars> updated | Lars> (if not I w
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
|
| Lars> Yes, I know. I think no.po is the only one that has been updated
| Lars> (if not I will do that before 1.1.2). It is a problem keeping
| Lars> the po files up to date at t
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Yes, I know. I think no.po is the only one that has been updated
Lars> (if not I will do that before 1.1.2). It is a problem keeping
Lars> the po files up to date at this stage of development since we
Lars> have some huge inter
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
|
| Lars> I am going to have this in acinclude.m4:
|
| Lars> case $gxx_version in 2.7*) CXXFLAGS="$lyx_opt";; 2.95.*)
| Lars> CXXFLAGS="-g $lyx_opt -fno-exceptions -fno-rtti -f
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> I am going to have this in acinclude.m4:
Lars> case $gxx_version in 2.7*) CXXFLAGS="$lyx_opt";; 2.95.*)
Lars> CXXFLAGS="-g $lyx_opt -fno-exceptions -fno-rtti -fpermissive";;
Lars> *) CXXFLAGS="-g $lyx_opt -fno-exceptions -
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
|
| Lars> Ok, I think we should be ready for 1.1.2 now. There have not
| Lars> been many bugs reported, only two as I recall:
|
| Note also that the default values for html export
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Ok, I think we should be ready for 1.1.2 now. There have not
Lars> been many bugs reported, only two as I recall:
Note also that the default values for html export I used have no
really been tried in the real world (in particu
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
|
| Lars> Other than that I cannot recall seeing any bugs there were not
| Lars> present in 1.0.4 too.
|
| - some people have issues with locales not working. Does somebody recall
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Other than that I cannot recall seeing any bugs there were not
Lars> present in 1.0.4 too.
- some people have issues with locales not working. Does somebody recall
whether the problems are real or just misconfigurations?
-
Ok, I think we should be ready for 1.1.2 now. There have not been many
bugs reported, only two as I recall:
- problems with the Fax support
- this was a bug in some assertions in lyxstring.
- '-' vs. '_' bug
- problem with the SpaceLess function sh
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Juergen Vigna <[EMAIL PROTECTED]> writes: | I too think this should
Lars> apply ONLY to tmp_filenames. As I already stated | in an earlier
Lars> email if someone want's to export the latex-file and work | with
Lars> that, he is
Juergen Vigna <[EMAIL PROTECTED]> writes:
| I too think this should apply ONLY to tmp_filenames. As I already stated
| in an earlier email if someone want's to export the latex-file and work
| with that, he is responsible for choosing the right name!
Of course the export stuff in LyX needs a rew
On 03-Nov-99 Lars Gullik Bjønnes wrote:
> Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
>
>| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
>|
>| Lars> I agree that the algorithm Jean-Marc proposes is sufficient. I
>| Lars> think tht the whole SpaceLess function should go. W
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
|
| Lars> I agree that the algorithm Jean-Marc proposes is sufficient. I
| Lars> think tht the whole SpaceLess function should go. We could have
| Lars> a similar function with a di
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> I agree that the algorithm Jean-Marc proposes is sufficient. I
Lars> think tht the whole SpaceLess function should go. We could have
Lars> a similar function with a different name (like
Lars> tex-conforming-name), what I think
> "larry" == larry <[EMAIL PROTECTED]> writes:
larry> I know this would not be attractive to LaTeX purists, but one
larry> might consider a functionality that maps "sizes" selected in
larry> the Layout-> Character interface to a LaTeX size one or more
larry> levels higher, for those who want
Juergen Vigna <[EMAIL PROTECTED]> writes:
| > Moreover, using isgraph() does not make sense, since LaTeX could not
| > are less about locales. The list of characters to keep is known, it
| > is in the latex sources.
| >
| [sniped code]
| >
| > And I propose also to rename SpaceLess to something
> "Ben" == Ben Cazzolato <[EMAIL PROTECTED]> writes:
Ben> Minor error in Customisation.lyx Section 3.6.1, DPI setting and
Ben> font zoom
Ben> To convert cms to inches need to divide not multiply :)
Thanks. Fixed.
JMarc
On 03-Nov-99 Jean-Marc Lasgouttes wrote:
> Did you read my message from yesterday? SpaceLess should only be
> needed for latex, and thus only keep characters with catcode 11 or 12.
> We do not care about /, since it is _not_ supposed to be here in a
> valid .lyx file name. If we want to check al
Minor error in Customisation.lyx
Section 3.6.1, DPI setting and font zoom
To convert cms to inches need to divide not multiply :)
Ben
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> I have put a new version of SpaceLess in cvs, main trunk. If
Lars> there are other characters than '/' that needs to get
Lars> substituded please add them to the change string.
Lars> I would especially like to have this tested
> "Peter" == Peter Lundqvist <[EMAIL PROTECTED]> writes:
Peter> In lyx-1.0.4/src/Makefile I miss a path to the xforms library.
Peter> On line 54 I whish that -L/usr/X11R6/lib would be continued
Peter> with :/usr/lib , since that's where the xform makefile puts it
Peter> by default.
As far as
48 matches
Mail list logo