Hi,
2006-04-25 21:23 +0200, Albert Pettersson:
Hi!
I have some things I would like to know how I do in LyX. I am completely new
to LaTeX and LyX.
1. How can I put some text in the upper right corner of the first page
(documentclass article)?
Insert-Special formatting-Horizonal
Hi Stacia,
did you try using vertical fill (vfill)? These are in LayoutParagraphSpacing
and do not forget to select Keep space.
Example file attached.
Vasek
On Wednesday 26 April 2006 05:01, Stacia Hartleben wrote:
How do I place something in the very center of a page, if I want
something
Ben Outram wrote:
I'm having trouble using document classes in Lyx. I create a new document and
then go to the document settings. The only classes which are available for
selection from the drop down list are article, book, letter, and report. The
others are marked as unavailable e.g.
Albert == Albert Pettersson [EMAIL PROTECTED] writes:
Albert 3. How can I start a new paragraph without starting a new
Albert number in a numbered list? I mean that I want to have more
Albert than one paragaph to a number.
Create your new paragraph as Standard (or something else as itemize
for
I am on 10.4 - and using LyX 1.4.1 has so far not given me any trouble.
B:)
On 4/26/06, Mike Mellor [EMAIL PROTECTED] wrote:
On Apr 25, 2006, at 7:30 PM, Bennett Helm wrote:
On Tue, 2006-04-25 at 15:56 -0500, Bruce Pourciau wrote:
I am currently running LyX 1.3.4 on Mac OS 10.2.8. If I
Basically it is an easy trick: Type return on the empty float (The
cursor is on the caption text insertion point) and you get the
insertion point for the graphics above the caption...
Am 26.04.2006 um 11:11 schrieb Jean-Marc Lasgouttes:
Albert 4. When I have a figure, I can put the
Albert
Hi,
we're running LyX 1.3.7 for a time on a Windows 2000 TerminalServer. Now we want
to migrate the users on a Win 2003 TerminalServer. Therefore we need to install
LyX on it. At first I tried to install LyX 1.3.7, cause I am used to it. We had
the problems with the config-script at installation,
Todd Denniston wrote:
Sanders, Maarten (M.J.L.) wrote:
Hi,
We use a lot of branches in modular end user manuals for our
equipment. Does anyone have an approach on dealing with not
branches? E.g., the piece of text applies to every piece of
equipment, except for no. 32. As you can imagine
Hi,
I am using lyx 1.4.1 on a XP operating system. I have read douments on
customization and information on keyboard mapping etc. but can't resolve
this problem.
After indicating in preferences to use american keyboards one and two for
primary and secondary boards and then creating a lyxrc file
Mike wrote:
locales are availible in C:\Programme\LyX141\Resources\locale, so that should be
fine.
I searched in the mailing list archive, but I couldn't find an answer or a tip
how to fix that problem. Maybe one of you know the solution.
Best regards
Mike
If you mean the menus are in
Hello,
I import a latex file to Lyx. The original file contains the following
\subfigure command:
\begin{figure} \centering
\mbox{\subfigure[Figure subtitle]
{\epsfig{figure=myfigure.eps,width=0.50\textwidth}}
\quad
\subfigure[Another figure subtitle]
Hi!
1. How can I put some text in the upper right corner of the first
page
(documentclass article)?
Insert a margin note along your title and inside the margin note put a
ERT box with \vspace{-2cm} and write the text you want in the upper
right corner in the margin note. (You might try
What is an ERT box? I have searched for ERT in the user's guide, but
I didn't find anything. I think, however, that a margin note would be
too small. I suppose I'll have to learn how fancyhdr works.
ERT is explained in the FAQ document that comes with LyX and on this
page:
Insert a margin note along your title and inside the margin note put a
ERT box with \vspace{-2cm} and write the text you want in the upper
right corner in the margin note. (You might try different lengths to
get the correct height of the text). If your text is wider than the
margin it will wrap
Stacia Hartleben wrote:
Hi, I am trying to write a document in APA style. I selected the APA
layout, but there's one thing that doesn't line up with what my
teacher wants. The section headings are properly centered, but they're
in a slightly larger font than the rest of the document. How do I
on. 26. april 2006 16:53 skreiv Albert Pettersson:
Hi!
The easiest way is the increase the margin width and put a negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that. If I do
this, the whole document will change, won't it?
Hi there,
I recently updated to lyx 1.4.1 and am very happy with the interface and
everything, but there seems to be a problem with the updating of
multi-part-documents. Searching the mail-archieve, all I found was this
old message - exactly this behaviour reoccurs in 1.4.1 - any ideas? Is
this a
Hi!
The easiest way is the increase the margin width and put a negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that. If I do
this, the whole document will change, won't it?
Yes, it will. If you only want some
Siterer Albert Pettersson [EMAIL PROTECTED]:
Hi!
The easiest way is the increase the margin width and put a
negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that. If I
do
this, the whole document will
On 4/26/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Siterer Albert Pettersson [EMAIL PROTECTED]:
Hi!
The easiest way is the increase the margin width and put a
negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to
Hi list,
First, this mail was intended to be a question, but I solved the problem
myself just some minutes later. I post it here, in prevention from other
users that could get stuck into a similar scenario.
This is a laptop with Fedora Core 4; printing from this unit has been
configured to do
On 4/26/06, Ingar Pareliussen [EMAIL PROTECTED] wrote:
on. 26. april 2006 16:53 skreiv Albert Pettersson:
Hi!
The easiest way is the increase the margin width and put a negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that.
Hi again,
2006-04-26 16:53 +0200, Albert Pettersson:
Insert-Special formatting-Horizonal fill
Well, then the text gets right allignment. I don't want that.
Then what do you want? Inserting a horizontal fill pushes the text to
the right margin, i.e. if you use it in the first line of a page,
Hi all, I use LyX 1.4.0 on Linux (FC4), and I noticed that the fonts
produced by my LyX docs are all slightly different (uglier when
displayed in, e.g., evince) than those of my LaTeX docs. I found that
if I export to LaTeX and remove the line saying
\usepackage[T1]{fontenc}, then the font looks
Hi all, I am happily using the AMS article layout and the Algo article
layout (http://bgu.chez-alice.fr/). However, I'd like to create a
document including both Theorems and Algorithms. Is there any way I
can easily accomplish this? Do I need to somehow combine these two
document classes? Thanks
Am Mittwoch, 26. April 2006 16:32 schrieb Dmitry Khvorostyanov:
However, using File-Import-Latex command produces erroneous output,
the figure subtitles are displayed in a very strange manner. This is the
result of excessive { } generated by tex2lyx in each \subfigure
command. Here is what
Sorry - I meant to include this third issue in my previous email.
Another issue is that I no longer seem to be able to insert nested
inline math in text
Basically, pre-1.4.x, I was able to hit ctrl-M while editing math,
which put me in text mode, and then hit ctrl-M again to insert
variables.
[EMAIL PROTECTED] wrote:
Sorry - I meant to include this third issue in my previous email.
Another issue is that I no longer seem to be able to insert nested
inline math in text
Basically, pre-1.4.x, I was able to hit ctrl-M while editing math,
which put me in text mode, and then hit ctrl-M
Hi all, I just uninstalled LyX 1.3.7 from my Windows box (which was
working great) and installed LyX 1.4.1. However, now third-level
bullets (in itemize) show up as ampersands (@). I also saw the same
thing when I upgraded (via yum) on my FC4 box. Is this expected?
Also, is there any way to
[EMAIL PROTECTED] wrote:
Hi all, I use LyX 1.4.0 on Linux (FC4), and I noticed that the fonts
produced by my LyX docs are all slightly different (uglier when
displayed in, e.g., evince) than those of my LaTeX docs. I found that
if I export to LaTeX and remove the line saying
Matthias Schmidt schrieb:
Thorsten asked yesterday - and I have the same problem: I have
installed lyx 1.4.1 german, but the menus are not german. Where can we
find them? I looked in the preferences, but couldnt find something.
There's now a workaround, see the known bugs section at
Hello LyXers,
LyX 1.4.1 on Windowsis always starts with english menus. We are working
to fix this for the next release. In the meantime you ca apply this
small workaround:
Ad this line:
set LYX_LOCALEDIR=LyXdir\Resources\locale
as second line to the file lyx.bat that you could find in the
Russell Davie wrote:
When Lyx (1.4.1) makes ps or pdf, the svg graphic is really scratchy.
Could you please send an example svg file.
Ok, its attached
The svg file is correct, this is a problem of imagemagick:
http://redux.imagemagick.org/discussion-server/viewtopic.php?t=6458
Then the
Wonderful! Now it worked.
Number 1 and number 3 are left to solve. I tried to put the things
here inside a margin note to the title too, but I got lots of errors.
Look: http://dump.sweclockers.com/gapa/lyx20060426.png
hm, I didn't get any errors. I do seem to have an older version
Hi,
2006-04-25 21:23 +0200, Albert Pettersson:
Hi!
I have some things I would like to know how I do in LyX. I am completely new
to LaTeX and LyX.
1. How can I put some text in the upper right corner of the first page
(documentclass article)?
Insert-Special formatting-Horizonal
Hi Stacia,
did you try using vertical fill (vfill)? These are in LayoutParagraphSpacing
and do not forget to select Keep space.
Example file attached.
Vasek
On Wednesday 26 April 2006 05:01, Stacia Hartleben wrote:
How do I place something in the very center of a page, if I want
something
Ben Outram wrote:
I'm having trouble using document classes in Lyx. I create a new document and
then go to the document settings. The only classes which are available for
selection from the drop down list are article, book, letter, and report. The
others are marked as unavailable e.g.
Albert == Albert Pettersson [EMAIL PROTECTED] writes:
Albert 3. How can I start a new paragraph without starting a new
Albert number in a numbered list? I mean that I want to have more
Albert than one paragaph to a number.
Create your new paragraph as Standard (or something else as itemize
for
I am on 10.4 - and using LyX 1.4.1 has so far not given me any trouble.
B:)
On 4/26/06, Mike Mellor [EMAIL PROTECTED] wrote:
On Apr 25, 2006, at 7:30 PM, Bennett Helm wrote:
On Tue, 2006-04-25 at 15:56 -0500, Bruce Pourciau wrote:
I am currently running LyX 1.3.4 on Mac OS 10.2.8. If I
Basically it is an easy trick: Type return on the empty float (The
cursor is on the caption text insertion point) and you get the
insertion point for the graphics above the caption...
Am 26.04.2006 um 11:11 schrieb Jean-Marc Lasgouttes:
Albert 4. When I have a figure, I can put the
Albert
Hi,
we're running LyX 1.3.7 for a time on a Windows 2000 TerminalServer. Now we want
to migrate the users on a Win 2003 TerminalServer. Therefore we need to install
LyX on it. At first I tried to install LyX 1.3.7, cause I am used to it. We had
the problems with the config-script at installation,
Todd Denniston wrote:
Sanders, Maarten (M.J.L.) wrote:
Hi,
We use a lot of branches in modular end user manuals for our
equipment. Does anyone have an approach on dealing with not
branches? E.g., the piece of text applies to every piece of
equipment, except for no. 32. As you can imagine
Hi,
I am using lyx 1.4.1 on a XP operating system. I have read douments on
customization and information on keyboard mapping etc. but can't resolve
this problem.
After indicating in preferences to use american keyboards one and two for
primary and secondary boards and then creating a lyxrc file
Mike wrote:
locales are availible in C:\Programme\LyX141\Resources\locale, so that should be
fine.
I searched in the mailing list archive, but I couldn't find an answer or a tip
how to fix that problem. Maybe one of you know the solution.
Best regards
Mike
If you mean the menus are in
Hello,
I import a latex file to Lyx. The original file contains the following
\subfigure command:
\begin{figure} \centering
\mbox{\subfigure[Figure subtitle]
{\epsfig{figure=myfigure.eps,width=0.50\textwidth}}
\quad
\subfigure[Another figure subtitle]
Hi!
1. How can I put some text in the upper right corner of the first
page
(documentclass article)?
Insert a margin note along your title and inside the margin note put a
ERT box with \vspace{-2cm} and write the text you want in the upper
right corner in the margin note. (You might try
What is an ERT box? I have searched for ERT in the user's guide, but
I didn't find anything. I think, however, that a margin note would be
too small. I suppose I'll have to learn how fancyhdr works.
ERT is explained in the FAQ document that comes with LyX and on this
page:
Insert a margin note along your title and inside the margin note put a
ERT box with \vspace{-2cm} and write the text you want in the upper
right corner in the margin note. (You might try different lengths to
get the correct height of the text). If your text is wider than the
margin it will wrap
Stacia Hartleben wrote:
Hi, I am trying to write a document in APA style. I selected the APA
layout, but there's one thing that doesn't line up with what my
teacher wants. The section headings are properly centered, but they're
in a slightly larger font than the rest of the document. How do I
on. 26. april 2006 16:53 skreiv Albert Pettersson:
Hi!
The easiest way is the increase the margin width and put a negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that. If I do
this, the whole document will change, won't it?
Hi there,
I recently updated to lyx 1.4.1 and am very happy with the interface and
everything, but there seems to be a problem with the updating of
multi-part-documents. Searching the mail-archieve, all I found was this
old message - exactly this behaviour reoccurs in 1.4.1 - any ideas? Is
this a
Hi!
The easiest way is the increase the margin width and put a negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that. If I do
this, the whole document will change, won't it?
Yes, it will. If you only want some
Siterer Albert Pettersson [EMAIL PROTECTED]:
Hi!
The easiest way is the increase the margin width and put a
negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that. If I
do
this, the whole document will
On 4/26/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Siterer Albert Pettersson [EMAIL PROTECTED]:
Hi!
The easiest way is the increase the margin width and put a
negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to
Hi list,
First, this mail was intended to be a question, but I solved the problem
myself just some minutes later. I post it here, in prevention from other
users that could get stuck into a similar scenario.
This is a laptop with Fedora Core 4; printing from this unit has been
configured to do
On 4/26/06, Ingar Pareliussen [EMAIL PROTECTED] wrote:
on. 26. april 2006 16:53 skreiv Albert Pettersson:
Hi!
The easiest way is the increase the margin width and put a negative
indentation in the document setup dialog. (-5 mm)
I only want a small part of the document to be like that.
Hi again,
2006-04-26 16:53 +0200, Albert Pettersson:
Insert-Special formatting-Horizonal fill
Well, then the text gets right allignment. I don't want that.
Then what do you want? Inserting a horizontal fill pushes the text to
the right margin, i.e. if you use it in the first line of a page,
Hi all, I use LyX 1.4.0 on Linux (FC4), and I noticed that the fonts
produced by my LyX docs are all slightly different (uglier when
displayed in, e.g., evince) than those of my LaTeX docs. I found that
if I export to LaTeX and remove the line saying
\usepackage[T1]{fontenc}, then the font looks
Hi all, I am happily using the AMS article layout and the Algo article
layout (http://bgu.chez-alice.fr/). However, I'd like to create a
document including both Theorems and Algorithms. Is there any way I
can easily accomplish this? Do I need to somehow combine these two
document classes? Thanks
Am Mittwoch, 26. April 2006 16:32 schrieb Dmitry Khvorostyanov:
However, using File-Import-Latex command produces erroneous output,
the figure subtitles are displayed in a very strange manner. This is the
result of excessive { } generated by tex2lyx in each \subfigure
command. Here is what
Sorry - I meant to include this third issue in my previous email.
Another issue is that I no longer seem to be able to insert nested
inline math in text
Basically, pre-1.4.x, I was able to hit ctrl-M while editing math,
which put me in text mode, and then hit ctrl-M again to insert
variables.
[EMAIL PROTECTED] wrote:
Sorry - I meant to include this third issue in my previous email.
Another issue is that I no longer seem to be able to insert nested
inline math in text
Basically, pre-1.4.x, I was able to hit ctrl-M while editing math,
which put me in text mode, and then hit ctrl-M
Hi all, I just uninstalled LyX 1.3.7 from my Windows box (which was
working great) and installed LyX 1.4.1. However, now third-level
bullets (in itemize) show up as ampersands (@). I also saw the same
thing when I upgraded (via yum) on my FC4 box. Is this expected?
Also, is there any way to
[EMAIL PROTECTED] wrote:
Hi all, I use LyX 1.4.0 on Linux (FC4), and I noticed that the fonts
produced by my LyX docs are all slightly different (uglier when
displayed in, e.g., evince) than those of my LaTeX docs. I found that
if I export to LaTeX and remove the line saying
Matthias Schmidt schrieb:
Thorsten asked yesterday - and I have the same problem: I have
installed lyx 1.4.1 german, but the menus are not german. Where can we
find them? I looked in the preferences, but couldnt find something.
There's now a workaround, see the known bugs section at
Hello LyXers,
LyX 1.4.1 on Windowsis always starts with english menus. We are working
to fix this for the next release. In the meantime you ca apply this
small workaround:
Ad this line:
set LYX_LOCALEDIR=LyXdir\Resources\locale
as second line to the file lyx.bat that you could find in the
Russell Davie wrote:
When Lyx (1.4.1) makes ps or pdf, the svg graphic is really scratchy.
Could you please send an example svg file.
Ok, its attached
The svg file is correct, this is a problem of imagemagick:
http://redux.imagemagick.org/discussion-server/viewtopic.php?t=6458
Then the
Wonderful! Now it worked.
Number 1 and number 3 are left to solve. I tried to put the things
here inside a margin note to the title too, but I got lots of errors.
Look: http://dump.sweclockers.com/gapa/lyx20060426.png
hm, I didn't get any errors. I do seem to have an older version
Hi,
2006-04-25 21:23 +0200, Albert Pettersson:
> Hi!
>
> I have some things I would like to know how I do in LyX. I am completely new
> to LaTeX and LyX.
>
>1. How can I put some text in the upper right corner of the first page
>(documentclass article)?
Insert->Special
Hi Stacia,
did you try using vertical fill (vfill)? These are in Layout>Paragraph>Spacing
and do not forget to select "Keep space".
Example file attached.
Vasek
On Wednesday 26 April 2006 05:01, Stacia Hartleben wrote:
> How do I place something in the very center of a page, if I want
>
Ben Outram wrote:
I'm having trouble using document classes in Lyx. I create a new document and
then go to the document settings. The only classes which are available for
selection from the drop down list are article, book, letter, and report. The
others are marked as unavailable e.g.
> "Albert" == Albert Pettersson <[EMAIL PROTECTED]> writes:
Albert> 3. How can I start a new paragraph without starting a new
Albert> number in a numbered list? I mean that I want to have more
Albert> than one paragaph to a number.
Create your new paragraph as Standard (or something else as
I am on 10.4 - and using LyX 1.4.1 has so far not given me any trouble.
B:)
On 4/26/06, Mike Mellor <[EMAIL PROTECTED]> wrote:
>
>
> On Apr 25, 2006, at 7:30 PM, Bennett Helm wrote:
>
> > On Tue, 2006-04-25 at 15:56 -0500, Bruce Pourciau wrote:
> >> I am currently running LyX 1.3.4 on Mac OS
Basically it is an easy "trick": Type return on the empty float (The
cursor is on the caption text insertion point) and you get the
insertion point for the graphics above the caption...
Am 26.04.2006 um 11:11 schrieb Jean-Marc Lasgouttes:
Albert> 4. When I have a figure, I can put the
Hi,
we're running LyX 1.3.7 for a time on a Windows 2000 TerminalServer. Now we want
to migrate the users on a Win 2003 TerminalServer. Therefore we need to install
LyX on it. At first I tried to install LyX 1.3.7, cause I am used to it. We had
the problems with the config-script at installation,
Todd Denniston wrote:
Sanders, Maarten (M.J.L.) wrote:
Hi,
We use a lot of branches in modular end user manuals for our
equipment. Does anyone have an approach on dealing with "not
branches"? E.g., the piece of text applies to every piece of
equipment, except for no. 32. As you can imagine
Hi,
I am using lyx 1.4.1 on a XP operating system. I have read douments on
customization and information on keyboard mapping etc. but can't resolve
this problem.
After indicating in preferences to use american keyboards one and two for
primary and secondary boards and then creating a lyxrc file
Mike wrote:
locales are availible in C:\Programme\LyX141\Resources\locale, so that should be
fine.
I searched in the mailing list archive, but I couldn't find an answer or a tip
how to fix that problem. Maybe one of you know the solution.
Best regards
Mike
If you mean the menus are in
Hello,
I import a latex file to Lyx. The original file contains the following
\subfigure command:
\begin{figure} \centering
\mbox{\subfigure[Figure subtitle]
{\epsfig{figure=myfigure.eps,width=0.50\textwidth}}
\quad
\subfigure[Another figure subtitle]
Hi!
>>1. How can I put some text in the upper right corner of the first
>> page
>>(documentclass article)?
>
>Insert a margin note along your title and inside the margin note put a
>ERT box with \vspace{-2cm} and write the text you want in the upper
>right corner in the margin note. (You
What is an ERT box? I have searched for "ERT" in the user's guide, but
I didn't find anything. I think, however, that a margin note would be
too small. I suppose I'll have to learn how fancyhdr works.
ERT is explained in the FAQ document that comes with LyX and on this
page:
>>>Insert a margin note along your title and inside the margin note put a
>>>ERT box with \vspace{-2cm} and write the text you want in the upper
>>>right corner in the margin note. (You might try different lengths to
>>>get the correct height of the text). If your text is wider than the
>>>margin
Stacia Hartleben wrote:
Hi, I am trying to write a document in APA style. I selected the APA
layout, but there's one thing that doesn't line up with what my
teacher wants. The section headings are properly centered, but they're
in a slightly larger font than the rest of the document. How do I
on. 26. april 2006 16:53 skreiv Albert Pettersson:
> Hi!
> >The easiest way is the increase the margin width and put a negative
> >indentation in the document setup dialog. (-5 mm)
>
> I only want a small part of the document to be like that. If I do
> this, the whole document will change, won't
Hi there,
I recently updated to lyx 1.4.1 and am very happy with the interface and
everything, but there seems to be a problem with the updating of
multi-part-documents. Searching the mail-archieve, all I found was this
old message - exactly this behaviour reoccurs in 1.4.1 - any ideas? Is
this a
> > > Hi!
> >
> > > >The easiest way is the increase the margin width and put a negative
> > > >indentation in the document setup dialog. (-5 mm)
> > >
> > > I only want a small part of the document to be like that. If I do
> > > this, the whole document will change, won't it?
> >
> > Yes, it
Siterer Albert Pettersson <[EMAIL PROTECTED]>:
> > > > Hi!
> > >
> > > > >The easiest way is the increase the margin width and put a
> negative
> > > > >indentation in the document setup dialog. (-5 mm)
> > > >
> > > > I only want a small part of the document to be like that. If I
> do
> > > >
On 4/26/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Siterer Albert Pettersson <[EMAIL PROTECTED]>:
>
> > > > > Hi!
> > > >
> > > > > >The easiest way is the increase the margin width and put a
> > negative
> > > > > >indentation in the document setup dialog. (-5 mm)
> > > > >
> > > > > I
Hi list,
First, this mail was intended to be a question, but I solved the problem
myself just some minutes later. I post it here, in prevention from other
users that could get stuck into a similar scenario.
This is a laptop with Fedora Core 4; printing from this unit has been
configured to do
On 4/26/06, Ingar Pareliussen <[EMAIL PROTECTED]> wrote:
> on. 26. april 2006 16:53 skreiv Albert Pettersson:
> > Hi!
>
> > >The easiest way is the increase the margin width and put a negative
> > >indentation in the document setup dialog. (-5 mm)
> >
> > I only want a small part of the document
Hi again,
2006-04-26 16:53 +0200, Albert Pettersson:
> >Insert->Special formatting->Horizonal fill
>
> Well, then the text gets right allignment. I don't want that.
Then what do you want? Inserting a horizontal fill pushes the text to
the right margin, i.e. if you use it in the first line of a
Hi all, I use LyX 1.4.0 on Linux (FC4), and I noticed that the fonts
produced by my LyX docs are all slightly different (uglier when
displayed in, e.g., evince) than those of my LaTeX docs. I found that
if I export to LaTeX and remove the line saying
\usepackage[T1]{fontenc}, then the font looks
Hi all, I am happily using the AMS article layout and the Algo article
layout (http://bgu.chez-alice.fr/). However, I'd like to create a
document including both Theorems and Algorithms. Is there any way I
can easily accomplish this? Do I need to somehow combine these two
document classes? Thanks
Am Mittwoch, 26. April 2006 16:32 schrieb Dmitry Khvorostyanov:
> However, using File->Import->Latex command produces erroneous output,
> the figure subtitles are displayed in a very strange manner. This is the
> result of excessive "{ }" generated by tex2lyx in each \subfigure
> command. Here
Sorry - I meant to include this third issue in my previous email.
Another issue is that I no longer seem to be able to insert nested
inline math in text
Basically, pre-1.4.x, I was able to hit ctrl-M while editing math,
which put me in text mode, and then hit ctrl-M again to insert
variables.
[EMAIL PROTECTED] wrote:
Sorry - I meant to include this third issue in my previous email.
Another issue is that I no longer seem to be able to insert nested
inline math in text
Basically, pre-1.4.x, I was able to hit ctrl-M while editing math,
which put me in text mode, and then hit ctrl-M
Hi all, I just uninstalled LyX 1.3.7 from my Windows box (which was
working great) and installed LyX 1.4.1. However, now third-level
bullets (in itemize) show up as ampersands ("@"). I also saw the same
thing when I upgraded (via yum) on my FC4 box. Is this expected?
Also, is there any way to
[EMAIL PROTECTED] wrote:
Hi all, I use LyX 1.4.0 on Linux (FC4), and I noticed that the fonts
produced by my LyX docs are all slightly different (uglier when
displayed in, e.g., evince) than those of my LaTeX docs. I found that
if I export to LaTeX and remove the line saying
Matthias Schmidt schrieb:
Thorsten asked yesterday - and I have the same problem: I have
installed lyx 1.4.1 german, but the menus are not german. Where can we
find them? I looked in the preferences, but couldnt find something.
There's now a workaround, see the known bugs section at
Hello LyXers,
LyX 1.4.1 on Windowsis always starts with english menus. We are working
to fix this for the next release. In the meantime you ca apply this
small workaround:
Ad this line:
set LYX_LOCALEDIR=\Resources\locale
as second line to the file "lyx.bat" that you could find in the \bin
1 - 100 of 102 matches
Mail list logo