Good morning,
Am not a technical person.
Have used lyx without problems for years.
Suddently the document previewers (all of them, e.g. dvi, pdf) do
not work any more. They start up and quit. Printing still works.
Suggestions welcome.
Thanks and regards,
lux
Thanks for the advice but I am using Fedora Core 5 and the
packages for it. Updating automated. lyx is version 1.4.3.
Kind regards,
lux
Good morning,
Am not a technical person.
Have used lyx without problems for years.
Suddently the document previewers (all of them, e.g. dvi, pdf) do
not work any more. They start up and quit. Printing still works.
Suggestions welcome.
Thanks and regards,
lux
Thanks for the advice but I am using Fedora Core 5 and the
packages for it. Updating automated. lyx is version 1.4.3.
Kind regards,
lux
Good morning,
Am not a technical person.
Have used lyx without problems for years.
Suddently the document previewers (all of them, e.g. dvi, pdf) do
not work any more. They start up and quit. Printing still works.
Suggestions welcome.
Thanks and regards,
lux
Thanks for the advice but I am using Fedora Core 5 and the
packages for it. Updating automated. lyx is version 1.4.3.
Kind regards,
lux
A. L. Meyers [EMAIL PROTECTED] writes:
Hi! lyx is set up on GNU/Linux. Currently cannot print and consistenly
get an error message when trying to print: unable to print. Check that
your parametres are correct. The system uses the cups printing system.
No print job gets to the queue
A. L. Meyers [EMAIL PROTECTED] writes:
Hi! lyx is set up on GNU/Linux. Currently cannot print and consistenly
get an error message when trying to print: unable to print. Check that
your parametres are correct. The system uses the cups printing system.
No print job gets to the queue
A. L. Meyers <[EMAIL PROTECTED]> writes:
> Hi! lyx is set up on GNU/Linux. Currently cannot print and consistenly
> get an error message when trying to print: unable to print. Check that
> your parametres are correct. The system uses the cups printing system.
> No print job
Hi! lyx is set up on GNU/Linux. Currently cannot print and consistenly
get an error message when trying to print: unable to print. Check that
your parametres are correct. The system uses the cups printing system.
No print job gets to the queue.
Here is the error output of the corresponding
Hi! lyx is set up on GNU/Linux. Currently cannot print and consistenly
get an error message when trying to print: unable to print. Check that
your parametres are correct. The system uses the cups printing system.
No print job gets to the queue.
Here is the error output of the corresponding
Hi! lyx is set up on GNU/Linux. Currently cannot print and consistenly
get an error message when trying to print: unable to print. Check that
your parametres are correct. The system uses the cups printing system.
No print job gets to the queue.
Here is the error output of the corresponding
Thank you very much for this help, Rob. Greatly appreciated.
Lux
--
If you receive this by error, please delete it and inform the sender.
Key fingerprint: 8994 CFDD 9C60 C978 A488 689F 5DCC EFC4 4D36 580D
To Big Brother Echelon from spook:
Marxist radar Semtex supercomputer Peking Bin Ladin
To you as well, Uwe, many thanks for the assistance.
Lux
--
If you receive this by error, please delete it and inform the sender.
Key fingerprint: 8994 CFDD 9C60 C978 A488 689F 5DCC EFC4 4D36 580D
To Big Brother Echelon from spook:
sentiero domestic disruption plutonium fissionable Bin Ladin
Thank you very much for this help, Rob. Greatly appreciated.
Lux
--
If you receive this by error, please delete it and inform the sender.
Key fingerprint: 8994 CFDD 9C60 C978 A488 689F 5DCC EFC4 4D36 580D
To Big Brother Echelon from spook:
Marxist radar Semtex supercomputer Peking Bin Ladin
To you as well, Uwe, many thanks for the assistance.
Lux
--
If you receive this by error, please delete it and inform the sender.
Key fingerprint: 8994 CFDD 9C60 C978 A488 689F 5DCC EFC4 4D36 580D
To Big Brother Echelon from spook:
sentiero domestic disruption plutonium fissionable Bin Ladin
Thank you very much for this help, Rob. Greatly appreciated.
Lux
--
If you receive this by error, please delete it and inform the sender.
Key fingerprint: 8994 CFDD 9C60 C978 A488 689F 5DCC EFC4 4D36 580D
To Big Brother Echelon from "spook":
Marxist radar Semtex supercomputer Peking Bin Ladin
To you as well, Uwe, many thanks for the assistance.
Lux
--
If you receive this by error, please delete it and inform the sender.
Key fingerprint: 8994 CFDD 9C60 C978 A488 689F 5DCC EFC4 4D36 580D
To Big Brother Echelon from "spook":
sentiero domestic disruption plutonium fissionable Bin Ladin
Hi! Planning to get our department to replace M$ Word with LyX to write
audit reports, was most pleased to see that there is a native WinDoze
version, downloaded it, installed it without a glitch and ...
DVI preview does not work. LyX looks for some files or libraries it
cannot find. Would
Hi! Planning to get our department to replace M$ Word with LyX to write
audit reports, was most pleased to see that there is a native WinDoze
version, downloaded it, installed it without a glitch and ...
DVI preview does not work. LyX looks for some files or libraries it
cannot find. Would
Hi! Planning to get our department to replace M$ Word with LyX to write
audit reports, was most pleased to see that there is a native WinDoze
version, downloaded it, installed it without a glitch and ...
DVI preview does not work. LyX looks for some files or libraries it
cannot find. Would
Hi! Please excuse me for asking a dumb question. Perhaps I have
missed something. Would someone please post the complete URL leading
to the incoming directory?
Greetings,
Lux
--
If you receive this by error, please delete it and inform the sender.
http://www.consult-meyers.com recommends
Hi! Please excuse me for asking a dumb question. Perhaps I have
missed something. Would someone please post the complete URL leading
to the incoming directory?
Greetings,
Lux
--
If you receive this by error, please delete it and inform the sender.
http://www.consult-meyers.com recommends
Hi! Please excuse me for asking a dumb question. Perhaps I have
missed something. Would someone please post the complete URL leading
to the "incoming" directory?
Greetings,
Lux
--
If you receive this by error, please delete it and inform the sender.
http://www.consult-meyers.com recommends
Herbert Voss [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
Here is the (verbose) output of
running configure:
[ ... ]
+checking for document class g-brief-de [g-brief]... no
+checking for document class g-brief-en [g-brief]... no
there are only _two_ possibilities:
- you forget
Herbert Voss [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
BTW if you don't mind a stupid question, where can one find
further classes to populate /usr/share/texmf/tex/latex/ ? Lyx
configure stills shows some classes as not found.
a good idea is to install the recent TeXLive
http
Herbert Voss [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
Here is the (verbose) output of
running configure:
[ ... ]
+checking for document class g-brief-de [g-brief]... no
+checking for document class g-brief-en [g-brief]... no
there are only _two_ possibilities:
- you forget
Herbert Voss [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
BTW if you don't mind a stupid question, where can one find
further classes to populate /usr/share/texmf/tex/latex/ ? Lyx
configure stills shows some classes as not found.
a good idea is to install the recent TeXLive
http
Herbert Voss <[EMAIL PROTECTED]> writes:
> A. L. Meyers wrote:
>
> > Here is the (verbose) output of
> > running configure:
> >
> [ ... ]
> > +checking for document class g-brief-de [g-brief]... no
> > +checking for document class g-brief
Herbert Voss <[EMAIL PROTECTED]> writes:
> A. L. Meyers wrote:
>
> > BTW if you don't mind a stupid question, where can one find
> > further classes to populate /usr/share/texmf/tex/latex/ ? Lyx
> > configure stills shows some classes as not found.
>
>
Hi! Sorry to come back on this but, alas, cannot get tex and lyx to
register classes in which I have many documents, e. g. g-grief.de, for
which there is a template.
All the classes I am looking for are found in
/usr/share/lyx/layouts/.
As Herbert suggested in the previous thread, here is the
Hi! Sorry to come back on this but, alas, cannot get tex and lyx to
register classes in which I have many documents, e. g. g-grief.de, for
which there is a template.
All the classes I am looking for are found in
/usr/share/lyx/layouts/.
As Herbert suggested in the previous thread, here is the
Hi! Sorry to come back on this but, alas, cannot get tex and lyx to
register classes in which I have many documents, e. g. g-grief.de, for
which there is a template.
All the classes I am looking for are found in
/usr/share/lyx/layouts/.
As Herbert suggested in the previous thread, here is the
Angus Leeming [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
Hello. Was using the GNU/Debian/Linux package of Lyx for a long
time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject
Herbert Voss [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
Hello. Was using the GNU/Debian/Linux package of Lyx for a long time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject
Angus Leeming [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
Hello. Was using the GNU/Debian/Linux package of Lyx for a long
time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject
Herbert Voss [EMAIL PROTECTED] writes:
A. L. Meyers wrote:
Hello. Was using the GNU/Debian/Linux package of Lyx for a long time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject
Angus Leeming <[EMAIL PROTECTED]> writes:
> A. L. Meyers wrote:
>
>> Hello. Was using the GNU/Debian/Linux package of Lyx for a long
>> time
>> without any problems. Recently, when opening old Lyx documents or
>> trying to make a new one using a template,
Herbert Voss <[EMAIL PROTECTED]> writes:
> A. L. Meyers wrote:
>> Hello. Was using the GNU/Debian/Linux package of Lyx for a long time
>> without any problems. Recently, when opening old Lyx documents or
>> trying to make a new one using a template, I consistently
Hello. Was using the GNU/Debian/Linux package of Lyx for a long time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject line above, unknown text class.
As I use Lyx as a standard
Hello. Was using the GNU/Debian/Linux package of Lyx for a long time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject line above, unknown text class.
As I use Lyx as a standard
Hello. Was using the GNU/Debian/Linux package of Lyx for a long time
without any problems. Recently, when opening old Lyx documents or
trying to make a new one using a template, I consistently get error
messages like the subject line above, "unknown text class".
As I use Lyx as a standard
On Sun, 29 Jul 2001, Marko Degenkolb wrote:
Hi,
after installing 1.1.6fix3 I can't view my dvi with kdvi anymore.
On the console kdvi complains about an unknown option -paper.
However, with 1.1.6fix1 and fix2 this worked perfectly. Does anybody
know how to get lyx and kdvi working together
On Sun, 29 Jul 2001, Marko Degenkolb wrote:
Hi,
after installing 1.1.6fix3 I can't view my dvi with kdvi anymore.
On the console kdvi complains about an unknown option -paper.
However, with 1.1.6fix1 and fix2 this worked perfectly. Does anybody
know how to get lyx and kdvi working together
On Sun, 29 Jul 2001, Marko Degenkolb wrote:
> Hi,
>
> after installing 1.1.6fix3 I can't view my dvi with kdvi anymore.
> On the console kdvi complains about an unknown option -paper.
> However, with 1.1.6fix1 and fix2 this worked perfectly. Does anybody
> know how to get lyx and kdvi working
On Sat, 28 Jul 2001, Klaus Vink Slott wrote:
Just saw thread about installing lyx on a RH7.1 system. There was a lot
of messages about RH politics, compare other distributions ect. But I
saw no messages whith actual help.
Is it possible to get Lyx working on a RH 7.1 using rpm packages?
On Sat, 28 Jul 2001, Klaus Vink Slott wrote:
Just saw thread about installing lyx on a RH7.1 system. There was a lot
of messages about RH politics, compare other distributions ect. But I
saw no messages whith actual help.
Is it possible to get Lyx working on a RH 7.1 using rpm packages?
On Sat, 28 Jul 2001, Klaus Vink Slott wrote:
> Just saw thread about installing lyx on a RH7.1 system. There was a lot
> of messages about RH politics, compare other distributions ect. But I
> saw no messages whith actual help.
>
> Is it possible to get Lyx working on a RH 7.1 using rpm
Dear fellow LyXers,
LyX is my favourite programme so I was quite disappointed in not having
it work right out of the box on FreeBSD, installed from the ports
tree. Everything compiled and was installed without any error messages.
So I cannot figure out if the problems are LyX and/or LyX
Dear fellow LyXers,
LyX is my favourite programme and a mission critical app.
Have run into problems aftering installing LyX 1.1.6 patch 2 from source
under FreeBSD 4.3 using the ports tree. Everything compiled and
installed without complications.
The problems:
1. no sub-classes of docs, e.
Dear fellow LyXers,
LyX is my favourite programme so I was quite disappointed in not having
it work right out of the box on FreeBSD, installed from the ports
tree. Everything compiled and was installed without any error messages.
So I cannot figure out if the problems are LyX and/or LyX
Dear fellow LyXers,
LyX is my favourite programme and a mission critical app.
Have run into problems aftering installing LyX 1.1.6 patch 2 from source
under FreeBSD 4.3 using the ports tree. Everything compiled and
installed without complications.
The problems:
1. no sub-classes of docs, e.
Dear fellow LyXers,
LyX is my favourite programme so I was quite disappointed in not having
it work "right out of the box" on FreeBSD, installed from the "ports"
tree. Everything compiled and was installed without any error messages.
So I cannot figure out if the problems are LyX and/or LyX
Dear fellow LyXers,
LyX is my favourite programme and a "mission critical app".
Have run into problems aftering installing LyX 1.1.6 patch 2 from source
under FreeBSD 4.3 using the ports tree. Everything compiled and
installed without complications.
The problems:
1. no sub-classes of docs, e.
-BEGIN PGP SIGNED MESSAGE-
On Monday 12 February 2001 22:24, Herbert Voss wrote:
Tuukka Toivonen wrote:
On Mon, 12 Feb 2001, Jim Osborn wrote:
When she wants eighteen-point type, dammit, she wants eighteen
points. She says anyone who speced a type size of "huger"
would have
-BEGIN PGP SIGNED MESSAGE-
On Monday 12 February 2001 22:24, Herbert Voss wrote:
Tuukka Toivonen wrote:
On Mon, 12 Feb 2001, Jim Osborn wrote:
When she wants eighteen-point type, dammit, she wants eighteen
points. She says anyone who speced a type size of "huger"
would have
-BEGIN PGP SIGNED MESSAGE-
On Monday 12 February 2001 22:24, Herbert Voss wrote:
> Tuukka Toivonen wrote:
> > On Mon, 12 Feb 2001, Jim Osborn wrote:
> > > When she wants eighteen-point type, dammit, she wants eighteen
> > > points. She says anyone who speced a type size of "huger"
> > >
-BEGIN PGP SIGNED MESSAGE-
On Wednesday 07 February 2001 11:52, Beyer, Marcus wrote:
JMarc Are you sure that german typography rules demand that
JMarc \frenchspacing be in effect?
Almost sure, yes.
Can someone who has more knowledge than me help here?
On the page
-BEGIN PGP SIGNED MESSAGE-
On Wednesday 07 February 2001 12:12, Jean-Marc Lasgouttes wrote:
"A" == A L Meyers [EMAIL PROTECTED] writes:
A Yes, you can be sure. German orthography does not require two
A spaces after a .. before beginning a new sentence, only one.
So,
-BEGIN PGP SIGNED MESSAGE-
On Wednesday 07 February 2001 11:52, Beyer, Marcus wrote:
JMarc Are you sure that german typography rules demand that
JMarc \frenchspacing be in effect?
Almost sure, yes.
Can someone who has more knowledge than me help here?
On the page
-BEGIN PGP SIGNED MESSAGE-
On Wednesday 07 February 2001 12:12, Jean-Marc Lasgouttes wrote:
"A" == A L Meyers [EMAIL PROTECTED] writes:
A Yes, you can be sure. German orthography does not require two
A spaces after a .. before beginning a new sentence, only one.
So,
-BEGIN PGP SIGNED MESSAGE-
On Wednesday 07 February 2001 11:52, Beyer, Marcus wrote:
> JMarc> Are you sure that german typography rules demand that
> JMarc> \frenchspacing be in effect?
>
> Almost sure, yes.
> Can someone who has more knowledge than me help here?
>
> On the page
>
-BEGIN PGP SIGNED MESSAGE-
On Wednesday 07 February 2001 12:12, Jean-Marc Lasgouttes wrote:
> >>>>> "A" == A L Meyers <[EMAIL PROTECTED]> writes:
>
> A> Yes, you can be sure. German orthography does not require two
> A> spaces after a ..
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 05 February 2001 10:43, GT wrote:
I'm going to install Linux (or FreeBSD) mainly for using Tetex and
LyX. I realize the packages are the same. Will things work equally
well in, say, Debian, Mandrake or FreeBSD?
Best regards
Gustaf
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 05 February 2001 20:42, Matthew Graybosch wrote:
I find that LyX is easier to use than StarOffice or the other word
processors, but wonder if there is a template available for writing
short fiction or novels? If anybody has one, could
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 05 February 2001 10:43, GT wrote:
I'm going to install Linux (or FreeBSD) mainly for using Tetex and
LyX. I realize the packages are the same. Will things work equally
well in, say, Debian, Mandrake or FreeBSD?
Best regards
Gustaf
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 05 February 2001 20:42, Matthew Graybosch wrote:
I find that LyX is easier to use than StarOffice or the other word
processors, but wonder if there is a template available for writing
short fiction or novels? If anybody has one, could
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 05 February 2001 10:43, GT wrote:
> I'm going to install Linux (or FreeBSD) mainly for using Tetex and
> LyX. I realize the packages are the same. Will things work equally
> well in, say, Debian, Mandrake or FreeBSD?
>
> Best regards
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 05 February 2001 20:42, Matthew Graybosch wrote:
> I find that LyX is easier to use than StarOffice or the other word
> processors, but wonder if there is a template available for writing
> short fiction or novels? If anybody has one, could
On Saturday 03 February 2001 03:32, Arnim Littek wrote:
On Fri, 2 Feb 2001 23:06:37 +0100, "Florian Cramer"
[EMAIL PROTECTED] wrote:
If so, is there any way the user community community help in this
affair? I would be willing to offer money on the "Free Software
Bazaar" for making LyX
On Saturday 03 February 2001 03:32, Arnim Littek wrote:
On Fri, 2 Feb 2001 23:06:37 +0100, "Florian Cramer"
[EMAIL PROTECTED] wrote:
If so, is there any way the user community community help in this
affair? I would be willing to offer money on the "Free Software
Bazaar" for making LyX
On Saturday 03 February 2001 03:32, Arnim Littek wrote:
> On Fri, 2 Feb 2001 23:06:37 +0100, "Florian Cramer"
<[EMAIL PROTECTED]> wrote:
> > If so, is there any way the user community community help in this
> > affair? I would be willing to offer money on the "Free Software
> > Bazaar" for
Dear David,
Had the same problems installing Lyx 1.1.6 to Debian 2.2.
Here is the hack that led to "successful" (but not debianized) install:
download SuSe 6.4 version of xpm
as root use mc to see the .tar.gz xpm.rpm file
use mc to COPY the libraries into their destination directories, which
Lieber Horst,
es handelt sich wohl kaum um elitres Verhalten, sondern eher um knappe
Mittel, wenn man bedenkt, dass die bersetzung der Handbcher sehr viel
Zeit und Knnen bruchte. Aufgrund der politischen Entwicklung der
letzten zwei Jahrhunderte ist das Englische -- sehr reicher Wortschatz,
Dear David,
Had the same problems installing Lyx 1.1.6 to Debian 2.2.
Here is the hack that led to "successful" (but not debianized) install:
download SuSe 6.4 version of xpm
as root use mc to see the .tar.gz xpm.rpm file
use mc to COPY the libraries into their destination directories, which
Lieber Horst,
es handelt sich wohl kaum um elitres Verhalten, sondern eher um knappe
Mittel, wenn man bedenkt, dass die bersetzung der Handbcher sehr viel
Zeit und Knnen bruchte. Aufgrund der politischen Entwicklung der
letzten zwei Jahrhunderte ist das Englische -- sehr reicher Wortschatz,
Dear David,
Had the same problems installing Lyx 1.1.6 to Debian 2.2.
Here is the hack that led to "successful" (but not debianized) install:
download SuSe 6.4 version of xpm
as root use mc to see the .tar.gz xpm.rpm file
use mc to COPY the libraries into their destination directories, which
Lieber Horst,
es handelt sich wohl kaum um elitäres Verhalten, sondern eher um knappe
Mittel, wenn man bedenkt, dass die Übersetzung der Handbücher sehr viel
Zeit und Können bräuchte. Aufgrund der politischen Entwicklung der
letzten zwei Jahrhunderte ist das Englische -- sehr reicher
Dear fellow LyXers,
Being in a kind of polyglot country and an avid LyX user, I would like to use the
templates "letter(g-brief,german)" and/or "letter(g-brief) as the basis for letters
in French. Alas, up to now I run into the following problems:
1. I load the template and save it under a
Dear fellow LyXers,
A simple, stupid question:
how do I configure LyX so it will load ispell in 8bit iso8859-1 mode to
spellcheck my French and German texts correctly?
Now I am getting things like:
uberfallig
It you can tell me where to find clear instructions, fine.
Thanks and best
Dear fellow LyX-users,
Tried to send this earlier today but apparently something went wrong
because I never received it myself.
Working in different languages, I wanted to use the templates:
g-brief-de.lyx or
g-brief-en.lyx
as bases for an new g-brief-fr.lyx,
same format in French.
View dvi
Dear fellow LyXers,
Being in a kind of polyglot country and an avid LyX user, I would like to use the
templates "letter(g-brief,german)" and/or "letter(g-brief) as the basis for letters
in French. Alas, up to now I run into the following problems:
1. I load the template and save it under a
Dear fellow LyXers,
A simple, stupid question:
how do I configure LyX so it will load ispell in 8bit iso8859-1 mode to
spellcheck my French and German texts correctly?
Now I am getting things like:
uberfallig
It you can tell me where to find clear instructions, fine.
Thanks and best
Dear fellow LyX-users,
Tried to send this earlier today but apparently something went wrong
because I never received it myself.
Working in different languages, I wanted to use the templates:
g-brief-de.lyx or
g-brief-en.lyx
as bases for an new g-brief-fr.lyx,
same format in French.
View dvi
Dear fellow LyXers,
Being in a kind of polyglot country and an avid LyX user, I would like to use the
templates "letter(g-brief,german)" and/or "letter(g-brief) as the basis for letters
in French. Alas, up to now I run into the following problems:
1. I load the template and save it under a
Dear fellow LyXers,
A simple, stupid question:
how do I configure LyX so it will load ispell in 8bit iso8859-1 mode to
spellcheck my French and German texts correctly?
Now I am getting things like:
uberfallig
It you can tell me where to find clear instructions, fine.
Thanks and best
Dear fellow LyX-users,
Tried to send this earlier today but apparently something went wrong
because I never received it myself.
Working in different languages, I wanted to use the templates:
g-brief-de.lyx or
g-brief-en.lyx
as bases for an new g-brief-fr.lyx,
same format in French.
View dvi
87 matches
Mail list logo
