Re: LyX and HiDPI Under Linux

the proper scaling. Jürgen Richard -- Nikos Alexandris | Remote Sensing & Geomatics GPG Key Fingerprint 6F9D4506F3CA28380974D31A9053534B693C4FB3

Re: Where is float figure* in tufte-book?

John Kane: > How long is the caption? I have tried a figure with an 84 word caption and > it looks okay to me. See attached pdf. I am trying to visualise it. Will report back once I have it. For now, I copy the figure* environment, or check it manually (Span columns). It works and it's ok like

Re: Where is float figure* in tufte-book?

Nikos Alexandris: > > Dear Tufte-LaTeX users, > > the example file "tufte-book.lyx" contains an example of the "float: > > Figure*", a full-width figure box. I can't trace this anywhere in the > > (Insert) menus. > > Using LyX Version 2.

Re: Where is float figure* in tufte-book?

Sorry, that msg was meant to hit the list too! Nikos * Nikos Alexandris [2015-10-25 01:12:11 +0300]: > > Nikos Alexandris: > > > > Dear Tufte-LaTeX users, > > > > > > the example file "tufte-book.lyx" contains an example of the "float

Re: Where is float figure* in tufte-book?

Nikos Alexandris: > > > > Dear Tufte-LaTeX users, > > > > > > > > the example file "tufte-book.lyx" contains an example of the > > > > "float: Figure*", a full-width figure box. I can't trace this > > > > anywh

Where is float figure* in tufte-book?

Dear Tufte-LaTeX users, the example file "tufte-book.lyx" contains an example of the "float: Figure*", a full-width figure box. I can't trace this anywhere in the (Insert) menus. Using LyX Version 2.1.4. Any help highly appreciated. Nikos

Re: LyX' greyed out notes add unwanted new line

* Nikos Alexandris [2015-06-05 12:50:36 +0300]: > * Jean-Marc Lasgouttes [2015-06-05 11:10:48 +0200]: > > > Le 05/06/2015 11:10, Nikos Alexandris a écrit : > > > It was 2.1.2. I reverted back to this version (Funtoo-Linux) and the > > > problem vanished. So,

Re: LyX' greyed out notes add unwanted new line

* Jean-Marc Lasgouttes [2015-06-05 11:10:48 +0200]: > Le 05/06/2015 11:10, Nikos Alexandris a écrit : > > It was 2.1.2. I reverted back to this version (Funtoo-Linux) and the > > problem vanished. So, there is something new in the 2.1.3. > > This is bad. > > Could

Re: LyX' greyed out notes add unwanted new line

Nikos Alexandris a écrit : > > I am facing a "new" problem using LyX 2.1.3 which I haven't seen before. > > I am re-compiling existing documents (my CV for example) in which I use > > quite frequently the Greyedout note inset. > > > > After each

LyX' greyed out notes add unwanted new line

Hi list. I am facing a "new" problem using LyX 2.1.3 which I haven't seen before. I am re-compiling existing documents (my CV for example) in which I use quite frequently the Greyedout note inset. After each \begin{lyxgreyedout} .. \end{lyxgreyedout} an unwanted newline is added. Anyone has

Re: Figure Float Placement: Many Figures, Many Small Subsections

* Rich Shepard [2015-05-27 13:33:43 -0700]: >I'm looking for suggestions on placing figure floats in a document where > each figure is associated with a short subsection or sub-subsection. There > are approximately 33 figures in the document (so far) and I would like to > place each figure so

Re: Strategies for locating errors

* Will Furnass [2015-05-05 11:51:56 +0100]: > How do others locate compilation errors in large multi-file documents? > > I get a 'Missing } inserted' error for 'l.1052' when compiling but can't > relate that line number to the LyX source. I then try exporting to tex > using pdflatex into a temp

Re: Greek characters in Lyx Beamer

On 21.01.2015 16:54, Michael Berger wrote: I am working on a linguistic presentation in Beamer (theme = Singapore). Single upright Greek characters need to be inserted here and there. Many hours spent on experiments and attempts to use Greek characters ended up in Latex errors. [..] Michael,

Re: Table of content with dots and shrink distance between entrys

On 11.12.2014 18:28, Uwe Ade wrote: Hello for a book i use coma-script-buch. My table of contens look like top1 1 top2 4 top3 12 I want a table of contents that look like top1…...1 top2…. .. 4 top3. …..12 I this possible ?How does this work? A solution for this is given

Re: Change 'Abstract' to 'Summary' in article class when working with babel and English (UK)

On Thursday 06 of December 2012 13:30:38 Roey Angel wrote: > Hi, Hi! > I'm trying to change the section name 'Abstract' to 'Summary' in an article > class document with babel enabled and language set to English (UK). > So far I tried to place in the preamble: > > \AtBeginDocument{% > \a

Re: BulletedItem in europecv.layout wrong?

Nikos: [...] == == == == == == == >% == Oops! > \ecvbullet*{Title}{\emph{Title of the thesis}} > \ecvbullet*{Supervisors}{Names of supervisors} > \ecvbullet*{Description}{{\small Description text}} That is me experimenting with the layout file! The *original* layout instructs like: \ecvitem*

BulletedItem in europecv.layout wrong?

Hi LyXers, I noticed that the BulletedItem in europecv is printed in the left margin/column (you-name-it -- MWE bellow). I think the correct position to print bulleted items is within the main body (right, wider column) under and within an Item. Isn't it? In the europecv.layout [*] it is

Re: Passing [table] to xcolor along with "Show changes in output"

Nikos Alexandris nikosalexandris.net> writes: > > > In the Document Class > Class options > Custom: > ... > > > - entering "table" or "xcolor=table" results, again, in "Undefined > > > control sequence" On Friday 22 of

Re: Passing [table] to xcolor along with "Show changes in output"

Nikos Alexandris nikosalexandris.net> writes: > > In the Document Class > Class options > Custom: ... > > - entering "table" or "xcolor=table" results, again, in "Undefined > > control sequence" On Friday 22 of June 2012 20:39:03 Paul A

Re: Passing [table] to xcolor along with "Show changes in output"

[...] The option clash I experience with "Track Changes" and "[table]{xcolor}" seems to be interesting for those involved in ticket . Nikos

Passing [table] to xcolor along with "Show changes in output"

Hi list. I can't get around an xcolor-related option clash. The "Show changes in output" option loads the "xcolor" package. I do want to use "\rowcolors" in some (or all) tables and therefore need to pass the [table] option for the package in question. Whatever of the following I have tried,

Unsubscribe an e-address in which I no more have control?

Hi list! How can I unsubscribe my (old) account, in which I have no more access? Is there some kind of a primitive UI or should I ask an admin? Thanks, Nikos

Re: Greek pdf(LaTeX) bookmarks within from LyX

On 2012-02-09, Nikos Alexandris wrote: ... > Well, it seems I haven't figured it out exactly. Any additional text > in Greek raises a failure to compile properly. I am (more) puzzled. > I'll try more combinations (since it's the only thing I can do for the > moment)

Re: Greek pdf(LaTeX) bookmarks within from LyX

I think that the minimal example should be expanded to contain greek text in the body--Otherwise it doesn't make any sense (to me), e.g. it should read as: \documentclass[greek,english]{scrbook} \usepackage[utf8]{inputenc} \usepackage[greek,english]{babel} \usepackage[unicode]{hyperref} \usep

Re: Greek pdf(LaTeX) bookmarks within from LyX

[Again] Günter: ... At least in the past, it was possible to give the language options only to the babel package. Under Tools>Settings>Language untick the [x] Global box. However, this is applied to all documents (where you usually prefer the language options in the documentclass, because then

Re: Greek pdf(LaTeX) bookmarks within from LyX

... Günter: ... One more question: the use of "greek" instead of "english"--as a documentclass option-- compiles fine as pure PDF-LaTeX (I mean outside of LyX); how can this be resembled within LyX? At least in the past, it was possible to give the language options only to the babel pac

Re: Greek pdf(LaTeX) bookmarks within from LyX

ounter{tocdepth}{0} \setlength{\parskip}{\medskipamount} \setlength{\parindent}{0pt} \usepackage{color} \usepackage[greek,english]{babel} \usepackage{fixltx2e} \usepackage[unicode=true, bookmarks=true,bookmarksnumbered=false,bookmarksopen=false, breaklinks=true,pdfborder={0 0 0},backref=page,col

Re: Greek pdf(LaTeX) bookmarks within from LyX

Nikos: Salutations to LyX-users. In tex.stackexchange [1] a working solution has been demonstrated by egreg on how to correctly print Greek (characters) as/in pdf(LaTeX) bookmarks. I recall a similar question of mine (and suggested solution from the hyperref developer) in this list [2] (which

Greek pdf(LaTeX) bookmarks within from LyX

Salutations to LyX-users. In tex.stackexchange [1] a working solution has been demonstrated by egreg on how to correctly print Greek (characters) as/in pdf(LaTeX) bookmarks. I recall a similar question of mine (and suggested solution from the hyperref developer) in this list [2] (which, for

Re: Unbroken long URL's within endnotes

Nikos: >What has been changed since? Well, for whom it may concern, I added the Minimalistic module. That was it!

Unbroken long URL's within endnotes

Hi LyXers, back on February I've used to have, within a "scrbook" document, many long URL's (using the URL inset) inside endnotes (using the "\theendnotes" in the end of the document). For example:

Re: [Solved] Error

Wolfgang: > > > > What about removing half of the document content, check the export, > > > > if ok, take half of the other half etc, until you have found the > > > > faulty part? Nikos Alexandris: > > > I've heard of this way to treat problems

Re: Vertically center a rotated cell within multirows [SOLVED]

Paul: > > If you're using the "rotate cell" button in the table toolbar, the > > problem is that the multirow command is being nested inside the sideways > > environment; you need the nesting in the opposite order. Try > > deselecting the rotation button in the toolbar and use something like > >

Re: Vertically center a rotated cell within multirows

On Saturday 01 of January 2011 18:14:52 Paul A. Rubin wrote: > If you're using the "rotate cell" button in the table toolbar, the problem > is that the multirow command is being nested inside the sideways > environment; you need the nesting in the opposite order. Try deselecting > the rotation but

Re: [Solved] Error "file ended while scanning use of \@@BOOKMARK" ?

On Monday 21 of February 2011 19:57:37 Nikos Alexandris wrote: > Nikos Alexandris wrote: > > > > (using Lyx 1.6.10 with book(KOMA-script)) > > > > > > > > I am counting down days before submitting... (it's really a deadline > > > > I

Re: table vertical alignment

On Monday 21 of February 2011 00:14:59 Uzair Baig wrote: > i cannot access (it is inactive) the option for align top, bottom, middle, > in my lyx file. its not allowing to be selected. [...] It requires a width. Don't know why... Nikos

Re: Error "file ended while scanning use of \@@BOOKMARK" ?

Nikos Alexandris wrote: > > > (using Lyx 1.6.10 with book(KOMA-script)) > > > I am counting down days before submitting... (it's really a deadline I > > > can't miss to deliver my work) and I used to compile my > > > koma-script-based do

Re: Error "file ended while scanning use of \@@BOOKMARK" ?

On Monday 21 of February 2011 04:26:40 Nikos Alexandris wrote: > Hi list, > > (using Lyx 1.6.10 with book(KOMA-script)) > > I am counting down days before submitting... (it's really a deadline I > can't miss to deliver my work) and I used to compile my koma-script-ba

Error "file ended while scanning use of \@@BOOKMARK" ?

Hi list, (using Lyx 1.6.10 with book(KOMA-script)) I am counting down days before submitting... (it's really a deadline I can't miss to deliver my work) and I used to compile my koma-script-based document in draft mode. Now, I try to compile it correctly and it insist returning this error: "fi

Vertically center a rotated cell within multirows

Hi! I have in several tables rotated cells (by 90 deg.) in which the contained text appears vertically. That in order to save horizontal space of course. Using "\multirow" (along with rotation) however, places the beginning of the contained word/text to start from the "vertical" center and expa

Re: How to vertically center/align a small svg object with other graphics

Nikos Alexandris: > > > > I 've already tried that (before posting) but the images have to be > > > > smaller (too small for me) to fit in an A4 page. > Paul Rubin: > > > Is that because there is extra white space within/between table cells? > >

Re: How to vertically center/align a small svg object with other graphics

Nikos Alexandris: > > > I 've already tried that (before posting) but the images have to be > > > smaller (too small for me) to fit in an A4 page. Paul Rubin: > > Is that because there is extra white space within/between table cells? > > That space can be

Re: How to vertically center/align a small svg object with other graphics

Nikos Alexandris: > > I 've already tried that (before posting) but the images have to be > > smaller (too small for me) to fit in an A4 page. Paul Rubin: > Is that because there is extra white space within/between table cells? > That space can be reduced. Hmm... maybe

Re: How to vertically center/align a small svg object with other graphics

On Saturday 11 of September 2010 16:18:17 Paul A. Rubin wrote: > You can do it by putting the images in a table. See > http://wiki.lyx.org/LyX/Tables#toc2 (and maybe #toc18) for hints. Hi! I 've already tried that (before posting) but the images have to be smaller (too small for me) to fit in a

Re: LyX layout for tRES?

On Monday 31 of May 2010 10:43:41 Pavel Sanda wrote: > Nikos Alexandris wrote: > > If there are no objections, could someone approve the site-links and > > upload the attached layout in <http://wiki.lyx.org/Layouts/TRES2e>? > > pass sent privately > pavel Thanks, Nikos

Re: LyX layout for tRES?

On Friday 28 of May 2010 12:16:15 Nikos Alexandris wrote: [...] > Should (all) this info go to the wiki? Are there other things to test? If there are no objections, could someone approve the site-links and upload the attached layout in <http://wiki.lyx.org/Layouts/TRES2e>? Thank y

Re: Trouble compiling PDF

M wrote: > I have a problem when I try to compile my beamer document in PDF, it > appears a popout and the message is something like this > Fichier inexistant : /tmp/lyx_tmpdir.MT4489/lyx_tmpbuf9/Defensa_Tesis2.pdf > I am using Kubuntu 10.04 and Lyx 1.6.6 Me too > Any idea??? No. But I have see

Re: LyX layout for tRES?

Nikos Alexandris: > > I started from the scratch with the content (Title, Section(s), > > Paragraphs and standard text) and still I had to revert to the default > > most of the settings > > to get it compile: > > - no other spacing besides "Single" works

Re: LyX layout for tRES?

On Friday 28 of May 2010 12:10:09 Nikos Alexandris wrote: > Nikos Alexandris: > > > > I started from the scratch with the content (Title, Section(s), > > > > Paragraphs and standard text) and still I had to revert to the > > > > default most of the

Re: LyX layout for tRES?

Nikos Alexandris: > > > I started from the scratch with the content (Title, Section(s), > > > Paragraphs and standard text) and still I had to revert to the default > > > most of the > > > > settings to get it compile: > ... > > > > -

Re: LyX layout for tRES?

Nikos Alexandris: > > I started from the scratch with the content (Title, Section(s), Paragraphs > > and standard text) and still I had to revert to the default most of the > > settings to get it compile: ... > > - no other spacing besides "Single" works > &

Re: LyX layout for tRES?

On Thursday 27 of May 2010 21:58:56 Nikos Alexandris wrote: [...] > Are there (other) things that I need to pay attention to? Some comments: I have an article based on koma-script with various nice tricks included (like in-line enumeration, scaled sub-tables, sub-figures and more...). I

Re: LyX layout for tRES?

Richard Heck wrote: > >> Hmm. If you look at View>Source (Complete Source), is there anything in > >> the preamble that might be loading a proof environment? Nikos Alexandris wrote: > > I guess so after seeing (below) the "ams..." stuff, right? >

Re: LyX layout for tRES?

Nikos Alexandris wrote: > >>> Does this relate to... well, the "theorems-ams" module? > >> Probably. Try removing that. > > Already did so and get the same error. After looking in "tRES2e.cls" I > > see no line that contains the str

Re: LyX layout for tRES?

Nikos Alexandris wrote: > > It is (if I am not wrong) article-based. Maybe not after all... ? [...] Richard Heck: > I thought it would be for theorems, etc, but perhaps it is not required: > Maybe the style already defines some of these environments. > > About the layout y

Re: LyX layout for tRES?

Nikos Alexandris wrote: > > does there exist a LyX layout for the tRES2e.cls [1] (and its respective > > .sty files)? How long, do you (experienced users or devs) think it would > > take for an average LyX user to implement this? Richard Heck: > This seems to be article

LyX layout for tRES?

Hi list, does there exist a LyX layout for the tRES2e.cls [1] (and its respective .sty files)? How long, do you (experienced users or devs) think it would take for an average LyX user to implement this? Thank you, Nikos --- [1] from

Re: Making a presentation in LyX

On Wed, 2010-04-07 at 17:51 +0100, Liviu Andronic wrote: > On Wed, Apr 7, 2010 at 5:35 PM, Steve Litt wrote: > > I've never made a presentation in LyX, but I'd like to try it out on a ten > > minute presentation. What do I use, Beamer? Could someone point me to a > > Beamer > > tutorial or Beamer

Re: things that I miss in lyx

On Tue, 2010-03-23 at 17:43 +0100, Jose Quesada wrote: > btw, to those jabref users eyeing zotero for the fast ref capture who would > not use it because you had to export to bib first... the new FF addon LyZ > makes this on the fly. It's a killer feature, two clicks and you are done. > And your li

Re: title page using koma script book

On Thu, 2010-03-04 at 22:17 +0100, Richard Brown wrote: > Thanks; I tried that but it output only one line of many, hiding the > rest and still not printing on the blank page after the title page! > > > in the KOMA script there are also the Uppertitleback and > Lowertitleb

Re: in Koma script book: how to put pages before the title page

On Fri, 2010-01-22 at 22:56 +0100, Richard Brown wrote: > I don't seem to be able to do this. If I put a \frontmatter command in > before my title, anything longer than five words produces a compile > error. What am I missing? A "minipage" before the ERT could do this (not extensively tested). Re

Re: how to vary the spacing between paragraphs?

On Thu, 2010-03-04 at 19:31 +0100, Richard Brown wrote: > I don't seem to be able to vary the distance between paragraphs. I'm > sure there must be a way. Grateful for pointers. > > Richard Have you already tried Document > Settings > Text Layout > Vertical space (choose what you like) under "Sep

Re: title page using koma script book

On Thu, 2010-03-04 at 20:11 +0100, Richard Brown wrote: > Uisng koma script book, and having on my title page only a title, > subject and authors, for some reason I get a white page after the title > page whereas I need to put the title verso there. I can't see any reason > why this is happening: w

Re: Strike-through text in Lyx

On Thu, 2010-03-04 at 16:11 +0100, Uwe Stöhr wrote: > Nikos Alexandris schrieb: > > > Uwe, is there a way to sort-of-blur the cell-contents in a table so they > > are not any more readable? Something like when you want to hide away > > some results? > > Highlight th

Re: Import and export to many formats...

On Wed, 2010-03-03 at 08:43 -0700, Rob Oakes wrote: > Hi Nikos, > > To get ODF to work, you must have Sun Java installed from the > restricted repositories. If you don't install that version, it won't > work. Rob, actually it did worked in my system without sun-java: # checking for versio

Re: Import and export to many formats...

On Thu, 2010-03-04 at 01:31 +0100, Νίκος Αλεξανδρής wrote: > On Wed, 2010-03-03 at 23:36 +, Guenter Milde wrote: > > On 2010-03-03, Νίκος Αλεξανδρής wrote: > > > On Wed, 03 Mar 2010 10:17:57 -0500, Νίκος Αλεξανδρής wrote: > > > > > Thanks, works as expected! Seems that the problem is my comple

Re: Strike-through text in Lyx

On Thu, 2010-03-04 at 14:31 +0100, Uwe Stöhr wrote: > Frederick Noronha schrieb: > > > How do I get strike-through text in Lyx 2.6.X please? > > You have two choices: > > - use the LaTeX-package "soul" and then the TeX-code command "\st{your text} > - use the package "ulem" and then the TeX-code

Re: PDF error converting to loadable format

On Thu, 2010-03-04 at 09:58 +, Graham Smith wrote: > I have a horrible feeling I have asked this before, but on Ubuntu 9.10 > Lyx won't show PDF images in the document (they compile OK). The same (almost) here. In my case most of the ".pdf"s won't appear but a few will do. But, as you say, th

Re: Documenting python code using LyX

On Wed, 2009-10-14 at 15:01 -0700, Rich Shepard wrote: > On Wed, 14 Oct 2009, Nikos Alexandris wrote: > > > Yes, I already do that. I have more comments than code :-p. And I tried > > pydoc. It works... but I am not sure this is what I need :-? > > Nikos, > >I

Re: Documenting python code using LyX

On Wed, 2009-10-14 at 21:34 +, Guenter Milde wrote: > On 2009-10-14, Nikos Alexandris wrote: > > On Wed, 2009-10-14 at 12:45 -0700, Rich Shepard wrote: > >> On Wed, 14 Oct 2009, Nikos Alexandris wrote: > > >> > Does anybody use LyX to document python

Re: Documenting python code using LyX

On Wed, 2009-10-14 at 14:25 -0700, Rich Shepard wrote: > On Wed, 14 Oct 2009, Nikos Alexandris wrote: > > > thanks for the reply. I have in mind (most of the times) a documentation > > to describe/ explain step by step what is done. I am a very beginner with > > Python,

Re: Documenting python code using LyX

On Wed, 2009-10-14 at 14:21 -0700, Rich Shepard wrote: > On Wed, 14 Oct 2009, Nikos Alexandris wrote: > > > I don't know if doxygen or pydoc is what I am looking for. Or is it > > exactly what I need? > > Nikos, > >Pydocs, in specific circumstances. >

Re: Documenting python code using LyX

On Wed, 2009-10-14 at 12:45 -0700, Rich Shepard wrote: > On Wed, 14 Oct 2009, Nikos Alexandris wrote: > > > Does anybody use LyX to document python code? Any hints? I've read about > > noweb but it looks a bit more complicated than it should be... (?). > >Why not

Documenting python code using LyX

H LyXians! Does anybody use LyX to document python code? Any hints? I've read about noweb but it looks a bit more complicated than it should be... (?). Thanks in advance, Nikos

Re: Looking for LYX training, seminars, etc...

Perry: > > Need some help! I am doing technical writing for a major project, and the > > content has to be in LYX. Are there any tutorials, seminars, training > > programs, expert directories, etc, that I can utilize to become > > LYX-proficient with minimal investment of time? I am in the NYC m

Re: Renumbering footnotes after each section

On Sun, 2009-09-20 at 02:21 +0300, Nikos Alexandris wrote: > John: > > > [...] I would > > > like to see my footnotes for each section renumbered > > > starting with 1. > > > [...] I tried inserting the code > > > "\...@addtoreset{footnot

Re: Renumbering footnotes after each section

John: > > [...] I would > > like to see my footnotes for each section renumbered > > starting with 1. > > [...] I tried inserting the code > > "\...@addtoreset{footnote}{section}" in the document preamble > > and still nothing. Marcelo Acuña: > I could not either obtain that. > I have koma-script

Re: How many use Linux:

Another (ubuntu-)linux user here :-)

Re: How to install new packages to Lyx?

dirac14: > > >>> I am a relatively new lyx user and this is my first post so please > > >>> forgive > > >>> my total ignorance.. > > >>> > > >>> I ve searched for at least 3 hours to give myself the answer to the > > >>> subject's question and there are two possible scenarios : either it is

Re: Drag and Drop

JFYI, gedit (GNOME's default text editor) has the Alt+Arrow(s) option to move selected line_s_ of text. I find it very convenient. Nikos

Re: Drag and Drop

the mouse. I mean select 2 lines (say title and it's text) and move it with Alt + arrow. Nikos > Nikos Alexandris wrote: > > On Fri, 2009-07-31 at 06:12 -0700, Marcelo Acuña wrote: > > > > > > Hello, > > > > > > > > Maybe a stupid questi

Re: Drag and Drop

On Fri, 2009-07-31 at 06:12 -0700, Marcelo Acuña wrote: > > Hello, > > > > Maybe a stupid question: > > But I realized that I can select/mark a sentence with the > > mouse, but I cannot drag this selected sentence around in > > Lyx, e.g. placing it in the paragraph above. Everytime I try > > this

Re: LyX crash feedback

? wrote: ... > > I'd advice you to upgrade to Qt4.5.2. --%<-- Steve Litt wrote: > How do I do that? --%<-- There are no qt 4.5.2 packages in the repositories for Jaunty (yet, and who knows if there will be an update before Karmic Koala). Eventually you can avoid compiling from source by gett

Re: LyX 1.6.2 crashed

On Fri, 2009-07-24 at 15:25 -0400, Steve Litt wrote: ... > I did what you said, and now have a very stable 1.6.3. You helped me out > immensely. So, it works! Great :-)

Re: LyX 1.6.2 crashed

Steve Litt wrote: > > > I opened one of my docs in LyX, clicked "document" on the menu, and lyx > > > terminated... > > ... > > > LyX Version 1.6.2 > > ... Nikos Alexandris wrote: > > If you have no strong reasons to stick with 1.6.2 you

Re: LyX 1.6.2 crashed

Steve Litt wrote: > I opened one of my docs in LyX, clicked "document" on the menu, and lyx > terminated... ... > LyX Version 1.6.2 ... Hi Steve! I am not really helping you but I remember experiencing some crasher using LyX 1.6.2 under Ubuntu Jaunty. Since some weeks I use 1.6.3 [1] and I did

Re: Donations for the Lyx project: Compare two Lyx documents

On Thu, 2009-07-09 at 11:36 +, silvio grosso wrote: > In my opinion, it is always a bit "tricky" to ask about donating money > for Open-source developers. > Some users assume that Open-source softwares must be always developed > and released for free. Often people assume that because they miss

Re: Multiple Language Quotation Problem

Ben Allen: ... > I don't have this problem when the Greek text is NOT followed by an English > translation. Does anyone know how to solve this problem? Hi! Did you check LyX-wiki: "English and greek" at http://wiki.lyx.org/LyX/Greek Kind regards, Nikos

Re: Using article(beamer) and presentation(beamer) at the same time

> > ( > > A small sample file is always very useful :-) > > ) > > Here it is. Just change the document class from presentation(beamer) > to asticle(beamer) and it should work. Thanks!

Re: Using article(beamer) and presentation(beamer) at the same time

Nikos: > >> > I am curious: do you use the "same" document to export once as an > >> > article and once as a presentation? If so, how does it work? Rainer: > >> Yes. I have two document classes /layouts ( presentation(beamer) and > >> article(beamer) ) and this is the only difference in the two

Re: Using article(beamer) and presentation(beamer) at the same time

Micha F: ... > The whole idea behind article and presentation mode beamer is that you can > have > both versions in the same file. I find it more useful for printed slides vs. > presented slides though then article and presentation in the same file. > > The OP's question though I don't know how

Re: Using article(beamer) and presentation(beamer) at the same time

Rainer: > 1) When I export the lyx file, it obviously overwrites the one with > the other. I therefore have to export the article(beamer), rename it, > change the document class to presentation(beamer), export it again and > preferably rename it as well to make sure that I don't overwrite it > aga

Re: add "lyx-users" to message Subject?

Murray E: > I don't want to direct these messages about lyx to some special folder > (I can do that later if I wish). I just want to be able to tell at a > glance from the Subject showing in Thunderbird that the message is for > the lyx-users group. > > As somebody else wrote, all the other m

Re: Lyx and DocBook

Ian: > > It also lists Lyx which seems a mature and usable tool for Latex, > > and produces highly attractive PDF documents. I read though that getting > > attractive HTML out of it is difficult. Richard: > I''m getting good results out of the new tool ELyXer. > http://wiki.lyx.org/Tools/ELyXer

Re: "automatically" create table based on external (ascii) data

On Tue, 2009-04-07 at 16:17 +, Anders Host-Madsen wrote: > Guenter Milde writes: > > Pasting into a table works with table-data if it is TAB separated. The > > space is too often needed inside a table cell in the general case. > > Thanks for the tip. I didn't realize this was possible. > I tr

Re: "automatically" create table based on external (ascii) data

On Mon, 2009-04-06 at 18:50 +0200, Siegfried Meunier-Guttin-Cluzel wrote: > Did you try the csv format (coma separated values ) ? > Siegfried. You mean... ? Insert directly a csv file? No, I did not. I just try to copy-paste from R. The " " (=space) also can (or should be able to) act as a "field

Re: How to adjust float figure behavior?

Sophie: > > At the moment, when I use a float figure it typically appears before the > > point where it is introduced in the text, often appears in the middle/end > > of > > the *previous* section. > > > > Is there a way to get float figures to appear at or after the point in the > > text wher

"automatically" create table based on external (ascii) data

Hi table-experts :-) Is it possible to copy a matrix derived from R and paste directly in a LyX table without waisting time to (re-)construct the table? For example, I have the following 3 by 3 data b02 0.3364205 0.5465307 b06 0.4624192 -0.1143715 b07 0.4435665 -0.2369216 Is it possible to cr

Re: Line spacing in listings

> > I wonder if there is a smarter way than placing /singlespace before each > > listing? > Sven, I bet the answer is in the listing package documentation [1]. > There numerous parameters with which you can do magic :-) [1] http://www.ctan.org/get/macros/latex/contrib/listings/listings.ins

Re: Line spacing in listings

Sven: > Hi, > > I'm trying to enbed some code into my document by using the > subdocument,type=listing way. > First I was surprised that the text wasn't automatically set to a > typewriter font. But basicstyle=\ttfamily fixed this though I'm not > totally certain how. > > My current problem i

  1   2   3   >