Ciao,
I did it with the nomencl package. To add an entry I inserted an ERT
\nomenclature{bla}{short form for blablablabla}
Finally, put an ERT
\printnomenclature
where you want to have the list.
To generate my doc including the nomenclature, I failed to convince LyX to
do that for me. I
Ciao,
I did it with the nomencl package. To add an entry I inserted an ERT
\nomenclature{bla}{short form for blablablabla}
Finally, put an ERT
\printnomenclature
where you want to have the list.
To generate my doc including the nomenclature, I failed to convince LyX to
do that for me. I
Ciao,
I did it with the nomencl package. To add an entry I inserted an ERT
\nomenclature{bla}{short form for blablablabla}
Finally, put an ERT
\printnomenclature
where you want to have the list.
To generate my doc including the nomenclature, I failed to convince LyX to
do that for me. I
PROTECTED]
An: lyx-users@lists.lyx.org
Betreff: Re: Ligature problem
Reinhard Mayr aka Czerwinski wrote:
Can somebody please tell me what to tweak to make all ligatures (ff, fi,
ffi, fl, ffl) work?
What fonts do you use? TeX cannot more than what is available in the
fonts.
The best coverage
PROTECTED]
An: lyx-users@lists.lyx.org
Betreff: Re: Ligature problem
Reinhard Mayr aka Czerwinski wrote:
Can somebody please tell me what to tweak to make all ligatures (ff, fi,
ffi, fl, ffl) work?
What fonts do you use? TeX cannot more than what is available in the
fonts.
The best coverage
AIL PROTECTED]>
An: lyx-users@lists.lyx.org
Betreff: Re: Ligature problem
> Reinhard Mayr aka Czerwinski wrote:
> > Can somebody please tell me what to tweak to make all ligatures (ff, fi,
> > ffi, fl, ffl) work?
>
> What fonts do you use? TeX cannot more than what
Hi there!
I have a problem with ligatures: 'fi' is fine, but all other ligatures seem not
to work. Especially in the case of 'ffi' this looks quite ugly - like {f}{fi}.
From googling I could only find articles that tell that ligatures look nice and
work in LaTeX ... :-/
Can somebody please
Hi there!
I have a problem with ligatures: 'fi' is fine, but all other ligatures seem not
to work. Especially in the case of 'ffi' this looks quite ugly - like {f}{fi}.
From googling I could only find articles that tell that ligatures look nice and
work in LaTeX ... :-/
Can somebody please
Hi there!
I have a problem with ligatures: 'fi' is fine, but all other ligatures seem not
to work. Especially in the case of 'ffi' this looks quite ugly - like {f}{fi}.
From googling I could only find articles that tell that ligatures look nice and
work in LaTeX ... :-/
Can somebody please
}
in your preamble, and see if you like the result.
Miki
Reinhard Mayr aka Czerwinski [EMAIL PROTECTED]
wrote in message news:[EMAIL PROTECTED]
Hi on the list!
I would like to have upright greek letters in both normal text and in
math
mode. Does anybody how to do this?
Thanks
}
in your preamble, and see if you like the result.
Miki
Reinhard Mayr aka Czerwinski [EMAIL PROTECTED]
wrote in message news:[EMAIL PROTECTED]
Hi on the list!
I would like to have upright greek letters in both normal text and in
math
mode. Does anybody how to do this?
Thanks
.
>
> put:
> \usepackage{euler}
>
> in your preamble, and see if you like the result.
>
> Miki
>
>
> "Reinhard Mayr aka Czerwinski" <[EMAIL PROTECTED]>
> wrote in message news:[EMAIL PROTECTED]
> > Hi on the list!
> >
> >
Hi on the list!
I would like to have upright greek letters in both normal text and in math
mode. Does anybody how to do this?
Thanks in advance!
Cz.
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
Hi on the list!
I would like to have upright greek letters in both normal text and in math
mode. Does anybody how to do this?
Thanks in advance!
Cz.
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
Hi on the list!
I would like to have upright greek letters in both normal text and in math
mode. Does anybody how to do this?
Thanks in advance!
Cz.
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
Just to complete the thread:
eventually, I was not able to solve the situation -- I had to insert a
manual page break.
Sad but true...
Cz.
On Mon, 31 Jul 2006 19:26:32 +0200, Reinhard Mayr aka Czerwinski
[EMAIL PROTECTED] wrote:
I checked that -- all pages are A4.
The page
Hmmm it seems as if I were not able to reproduce this behavior.
I tried again and set LANG=en_US and from that time on it worked out.
Thanks for your help!
Cz.
On Mon, 31 Jul 2006 11:10:14 +0200, Juergen Spitzmueller
[EMAIL PROTECTED] wrote:
Reinhard Mayr aka Czerwinski wrote
Just to complete the thread:
eventually, I was not able to solve the situation -- I had to insert a
manual page break.
Sad but true...
Cz.
On Mon, 31 Jul 2006 19:26:32 +0200, Reinhard Mayr aka Czerwinski
[EMAIL PROTECTED] wrote:
I checked that -- all pages are A4.
The page
Hmmm it seems as if I were not able to reproduce this behavior.
I tried again and set LANG=en_US and from that time on it worked out.
Thanks for your help!
Cz.
On Mon, 31 Jul 2006 11:10:14 +0200, Juergen Spitzmueller
[EMAIL PROTECTED] wrote:
Reinhard Mayr aka Czerwinski wrote
Just to complete the thread:
eventually, I was not able to solve the situation -- I had to insert a
manual page break.
Sad but true...
Cz.
On Mon, 31 Jul 2006 19:26:32 +0200, Reinhard Mayr aka Czerwinski
<[EMAIL PROTECTED]> wrote:
I checked that -- all pages are A4.
Th
Hmmm it seems as if I were not able to reproduce this behavior.
I tried again and set LANG=en_US and from that time on it worked out.
Thanks for your help!
Cz.
On Mon, 31 Jul 2006 11:10:14 +0200, Juergen Spitzmueller
<[EMAIL PROTECTED]> wrote:
Reinhard Mayr aka Czerwinski
PROTECTED]
An: lyx-users@lists.lyx.org
Betreff: Re: aspell / problems with umlauts
Reinhard Mayr aka Czerwinski wrote:
Words containing an umlaut (äöü) are not properly recognized, e.g.
the
word für is suggested to be replaced by für. Accepting the
replacement leads, in turn
Original-Nachricht
Datum: Mon, 31 Jul 2006 08:49:22 +0200
Von: Juergen Spitzmueller [EMAIL PROTECTED]
An: lyx-users@lists.lyx.org
Betreff: Re: Rotated longtable with multiple pages and caption
Reinhard Mayr aka Czerwinski wrote:
Hello,
I am looking for a solution
Hello,
actually this should not be, but it seems as if TeX sometimes forgets to break
my pages properly ... (see attached image)
My current version of my doc (but 380 kB) lets me reproduce the buggy output.
Is this a known bug? How can I solve such a situation?
Thanks for any hints!
Cz.
--
the source of the buggy result.
Still happy for responses ;)
Cz.
On Mon, 31 Jul 2006 18:49:00 +0200, Richard Heck [EMAIL PROTECTED]
wrote:
It looks to me as if there is a problem with page size in your viewer.
Check that you are viewing pages of the same size you are outputing.
Reinhard Mayr aka
PROTECTED]
An: lyx-users@lists.lyx.org
Betreff: Re: aspell / problems with umlauts
Reinhard Mayr aka Czerwinski wrote:
Words containing an umlaut (äöü) are not properly recognized, e.g.
the
word für is suggested to be replaced by für. Accepting the
replacement leads, in turn
Original-Nachricht
Datum: Mon, 31 Jul 2006 08:49:22 +0200
Von: Juergen Spitzmueller [EMAIL PROTECTED]
An: lyx-users@lists.lyx.org
Betreff: Re: Rotated longtable with multiple pages and caption
Reinhard Mayr aka Czerwinski wrote:
Hello,
I am looking for a solution
Hello,
actually this should not be, but it seems as if TeX sometimes forgets to break
my pages properly ... (see attached image)
My current version of my doc (but 380 kB) lets me reproduce the buggy output.
Is this a known bug? How can I solve such a situation?
Thanks for any hints!
Cz.
--
the source of the buggy result.
Still happy for responses ;)
Cz.
On Mon, 31 Jul 2006 18:49:00 +0200, Richard Heck [EMAIL PROTECTED]
wrote:
It looks to me as if there is a problem with page size in your viewer.
Check that you are viewing pages of the same size you are outputing.
Reinhard Mayr aka
AIL PROTECTED]>
An: lyx-users@lists.lyx.org
Betreff: Re: aspell / problems with umlauts
> Reinhard Mayr aka Czerwinski wrote:
> > Words containing an umlaut (äöü) are not properly recognized, e.g.
> the
> > word "für" is suggested to be replaced by "für". Ac
Original-Nachricht
Datum: Mon, 31 Jul 2006 08:49:22 +0200
Von: Juergen Spitzmueller <[EMAIL PROTECTED]>
An: lyx-users@lists.lyx.org
Betreff: Re: Rotated longtable with multiple pages and caption
> Reinhard Mayr aka Czerwinski wrote:
> > Hello,
>
Hello,
actually this should not be, but it seems as if TeX sometimes forgets to break
my pages properly ... (see attached image)
My current version of my doc (but 380 kB) lets me reproduce the buggy output.
Is this a known bug? How can I solve such a situation?
Thanks for any hints!
Cz.
--
the source of the buggy result.
Still happy for responses ;)
Cz.
On Mon, 31 Jul 2006 18:49:00 +0200, Richard Heck <[EMAIL PROTECTED]>
wrote:
It looks to me as if there is a problem with page size in your viewer.
Check that you are viewing pages of the same size you are outputing.
Reinhar
Hello,
I am looking for a solution in a somehow tricky situation.
(1) In my document there is a table that is quite long and wide.
Therefore, I would like to implement it as a rotated longtable. But as
soon as I tick the Rotate table 90 degrees checkbox, I recieve errors
like Missing \endgroup
Hello,
I am looking for a solution in a somehow tricky situation.
(1) In my document there is a table that is quite long and wide.
Therefore, I would like to implement it as a rotated longtable. But as
soon as I tick the Rotate table 90 degrees checkbox, I recieve errors
like Missing \endgroup
Hello,
I am looking for a solution in a somehow tricky situation.
(1) In my document there is a table that is quite long and wide.
Therefore, I would like to implement it as a rotated longtable. But as
soon as I tick the "Rotate table 90 degrees" checkbox, I recieve errors
like "Missing
Hello on the list!
I have a problem concerning aspell: The document I write is in English,
but my university wants me to write some paragraphs in German. OK, I
select them, change the language accordingly, installed the aspell-de
package and check the spelling.
Words containing an umlaut
Hello on the list!
I have a problem concerning aspell: The document I write is in English,
but my university wants me to write some paragraphs in German. OK, I
select them, change the language accordingly, installed the aspell-de
package and check the spelling.
Words containing an umlaut
Hello on the list!
I have a problem concerning aspell: The document I write is in English,
but my university wants me to write some paragraphs in German. OK, I
select them, change the language accordingly, installed the aspell-de
package and check the spelling.
Words containing an umlaut
First, I would try to rename (=backup) the LyX working directory (is there
anything like ~/.lyx in windows?) -- maybe there are some contents that
confuse the program.
Best, Cz.
On Sun, 23 Jul 2006 04:43:24 +0200, Bo Peng [EMAIL PROTECTED] wrote:
Hello all,
When I start lyx in debug I'm
First, I would try to rename (=backup) the LyX working directory (is there
anything like ~/.lyx in windows?) -- maybe there are some contents that
confuse the program.
Best, Cz.
On Sun, 23 Jul 2006 04:43:24 +0200, Bo Peng [EMAIL PROTECTED] wrote:
Hello all,
When I start lyx in debug I'm
First, I would try to rename (=backup) the LyX working directory (is there
anything like ~/.lyx in windows?) -- maybe there are some contents that
confuse the program.
Best, Cz.
On Sun, 23 Jul 2006 04:43:24 +0200, Bo Peng <[EMAIL PROTECTED]> wrote:
Hello all,
When I start lyx in debug
How I solved the problem:
Finally, I saved the RTF doc (2 landscape A4 pages) in a A3-portrait page
as PDF. As suggested by Jürgen, I inserted the PDF as figure, and the
results looks quite nice.
Thanks everybody!
Cz.
On Fri, 21 Jul 2006 16:24:25 +0200, Jürgen Spitzmüller
[EMAIL
How I solved the problem:
Finally, I saved the RTF doc (2 landscape A4 pages) in a A3-portrait page
as PDF. As suggested by Jürgen, I inserted the PDF as figure, and the
results looks quite nice.
Thanks everybody!
Cz.
On Fri, 21 Jul 2006 16:24:25 +0200, Jürgen Spitzmüller
[EMAIL
How I solved the problem:
Finally, I saved the RTF doc (2 landscape A4 pages) in a A3-portrait page
as PDF. As suggested by Jürgen, I inserted the PDF as figure, and the
results looks quite nice.
Thanks everybody!
Cz.
On Fri, 21 Jul 2006 16:24:25 +0200, Jürgen Spitzmüller
<[EMAIL
Hi there,
I would like to insert an RTF file into my working lyx doc. The RTF page
is rather wide, so I plan to put it on a landscape page (is that
possible?). There are some tabs in the file and their positions are
essential to the meaning, so I would like to keep them (or at least the
Hi there,
I would like to insert an RTF file into my working lyx doc. The RTF page
is rather wide, so I plan to put it on a landscape page (is that
possible?). There are some tabs in the file and their positions are
essential to the meaning, so I would like to keep them (or at least the
Hi there,
I would like to insert an RTF file into my working lyx doc. The RTF page
is rather wide, so I plan to put it on a landscape page (is that
possible?). There are some tabs in the file and their positions are
essential to the meaning, so I would like to keep them (or at least the
Well, I think there must be 2 steps of conversion - one for displaying the
image in LyX and one for the DVI output. -- Is that right?
When I use SVG as source format, which conversions take place for which
situation?
What is the preferred format for LyX and for DVI output?
I thought (might
. Juli 2006 19:14 schrieb Reinhard Mayr aka Czerwinski:
Well, I think there must be 2 steps of conversion - one for displaying
the
image in LyX and one for the DVI output. -- Is that right?
Yes.
When I use SVG as source format, which conversions take place for which
situation?
You can see
Well, I think there must be 2 steps of conversion - one for displaying the
image in LyX and one for the DVI output. -- Is that right?
When I use SVG as source format, which conversions take place for which
situation?
What is the preferred format for LyX and for DVI output?
I thought (might
. Juli 2006 19:14 schrieb Reinhard Mayr aka Czerwinski:
Well, I think there must be 2 steps of conversion - one for displaying
the
image in LyX and one for the DVI output. -- Is that right?
Yes.
When I use SVG as source format, which conversions take place for which
situation?
You can see
Well, I think there must be 2 steps of conversion - one for displaying the
image in LyX and one for the DVI output. -- Is that right?
When I use SVG as source format, which conversions take place for which
situation?
What is the preferred format for LyX and for DVI output?
I thought (might
ttwoch, 12. Juli 2006 19:14 schrieb Reinhard Mayr aka Czerwinski:
Well, I think there must be 2 steps of conversion - one for displaying
the
image in LyX and one for the DVI output. -- Is that right?
Yes.
When I use SVG as source format, which conversions take place for which
situation?
You c
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some sketches.
As it was some days ago discussed on the list, I created a conversion
definition SVG-EPS defined as inkscape -E $$o $$i as wells as one for
SVG-EPS as inkscape -e $$o $$i.
In principal
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some sketches.
As it was some days ago discussed on the list, I created a conversion
definition SVG-EPS defined as inkscape -E $$o $$i as wells as one for
SVG-EPS as inkscape -e $$o $$i.
In principal
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some sketches.
As it was some days ago discussed on the list, I created a conversion
definition SVG->EPS defined as "inkscape -E $$o $$i" as wells as one for
SVG->EPS as "inkscape -e $$o $$i".
In
Hi Zhenhua,
I do it like this:
o Ctrl-Shift-M -- math mode
o enter the equation
o press the 'label' button from the toolbar (or Insert/Label...) while in
the math field (that's the key!)
The lyx window says something like (eq:the-label)
HTH,
Reinhard.
On Mon, 03 Jul 2006
equation
sequentially, e.g. I want to mark it as equation *. How to do this? What
should I enter in the eq: .
Best wishes,
Zhenhua
On 2006.07.02 12:20:44 +0200, Reinhard Mayr aka Czerwinski wrote:
Hi Zhenhua,
I do it like this:
o Ctrl-Shift-M -- math mode
o enter the equation
o
Hi Zhenhua,
I do it like this:
o Ctrl-Shift-M -- math mode
o enter the equation
o press the 'label' button from the toolbar (or Insert/Label...) while in
the math field (that's the key!)
The lyx window says something like (eq:the-label)
HTH,
Reinhard.
On Mon, 03 Jul 2006
equation
sequentially, e.g. I want to mark it as equation *. How to do this? What
should I enter in the eq: .
Best wishes,
Zhenhua
On 2006.07.02 12:20:44 +0200, Reinhard Mayr aka Czerwinski wrote:
Hi Zhenhua,
I do it like this:
o Ctrl-Shift-M -- math mode
o enter the equation
o
Hi Zhenhua,
I do it like this:
o Ctrl-Shift-M --> math mode
o enter the equation
o press the 'label' button from the toolbar (or Insert/Label...) while in
the math field (that's the key!)
The lyx window says something like (eq:)
HTH,
Reinhard.
On Mon, 03 Jul 2006
efined equation
sequentially, e.g. I want to mark it as equation *. How to do this? What
should I enter in the "eq: ".
Best wishes,
Zhenhua
On 2006.07.02 12:20:44 +0200, Reinhard Mayr aka Czerwinski wrote:
Hi Zhenhua,
I do it like this:
o Ctrl-Shift-M --> math mode
o e
Hello,
there is a strange situation with hyphenation that seems to depend on my
current formatting. The line I wrote is
---
Resulting genotype YRM5: natNT2::PADH-DON1-3mCherry::kanMX6,
PADH-meGFP::URA3
---
where PADH both times is written with ADH as subscript, therefore these
3
Hello,
there is a strange situation with hyphenation that seems to depend on my
current formatting. The line I wrote is
---
Resulting genotype YRM5: natNT2::PADH-DON1-3mCherry::kanMX6,
PADH-meGFP::URA3
---
where PADH both times is written with ADH as subscript, therefore these
3
Hello,
there is a strange situation with hyphenation that seems to depend on my
current formatting. The line I wrote is
---
Resulting genotype YRM5: natNT2::PADH-DON1-3mCherry::kanMX6,
PADH-meGFP::URA3
---
where "PADH" both times is written with ADH as subscript, therefore these
3
66 matches
Mail list logo