> On Mar 15, 2024, at 4:03 AM, Gary Wilkinson wrote:
> if anyone can help to either describe how I can create a disk image from the
> T200 DVI floppy disk, or if anyone already has a T200 DVI disk image file
> that they could supply, then I'd be very grateful!
Steve put in a bunch of effort to
On Fri, Mar 15, 2024 at 11:06 AM Gary Wilkinson
wrote:
> Hi Guys, I hope it's OK to resurrect an old email thread.
>
I think the good folks here, who are wizards riding around on dinosaurs in
modern times, can handle a little necromancy.
> My DVI Gotek is still working well with my T102, but I
tchin100.com
Subject: Re: [M100] Adding Gotek to T100 Disk Video Interface
No, I think it was my fault. I missed out the “ [m100dvi]” you listed at the
start of the FF.CFG file on your email Josh.
I’m currently making a couple of blank images now to hold saved data & basic
program. Thanks ag
rprised if it couldn't be done; maybe
> someone on here has in fact already done it.*
>
>
> *Enjoy!*
> *m*
>
>
>
> - Original Message -
>
> *From:* james.z...@gmail.com
> *To:* m...@bitchin100.com
> *Sent:* Tuesday, May 09, 2023 3:17 PM
> *Subject:*
7;d be surprised
if it couldn't be done; maybe someone on here has in fact already done it.
Enjoy!
m
- Original Message -
From: james.z...@gmail.com
To: m...@bitchin100.com
Sent: Tuesday, May 09, 2023 3:17 PM
Subject: Re: [M100] Adding Gotek to T100 Disk Video Interfac
no it's not possible to read the disks on a PC there's no tool to do so
On Tue, May 9, 2023 at 12:18 PM wrote:
> Hey
>
> Just been reading this. My DVI is currently in storage, but I’ve been
> meaning to bring it out and swap the US PSU inside with a 240v unit I
> bought a while back.
>
> I’m no
HeyJust been reading this. My DVI is currently in storage, but I’ve been meaning to bring it out and swap the US PSU inside with a 240v unit I bought a while back.I’m no expert when it comes to using the DVI, I had a play about with it and really enjoyed the fact I could write with a proper display
No, I think it was my fault. I missed out the “ [m100dvi]” you listed at the
start of the FF.CFG file on your email Josh.
I’m currently making a couple of blank images now to hold saved data & basic
program. Thanks again for your help!
Sent from my iPhone
On 8 May 2023, at 15:53, Josh Malone w
I suspect the issue may be cskew=1 which is missing from my CFG. Grimakis
is also using interface=shugart (vs. mine using 'ibmpc') so that will
require the different drive number jumpering (effectively swapping 1 and 0
-- LFILES 0 might have worked)
Yeah, everyone should use Grimakis's files and i
Success
I copied the CFG files from Grimakis GitHub and they worked!! I’ll now puzzle
back and see what I had missed in my original CFG files, but for now I’m really
delighted to have it working. Thanks guys for all the help!!
Sent from my iPhone
On 8 May 2023, at 15:37, Gary Wilkinson wr
I checked my CFG files and they match and I made sure to keep the file name the
same on the img file you provided, but I’m still getting an error.
When I just have the Gotek drive installed I get the error “In Drive0 is NOT a
SYSTEM DISKETTE”
If I configure the Gotek as drive 1 and boot from th
On Mon, May 8, 2023 at 7:42 AM Gary Wilkinson
wrote:
> Hi Josh! It was your YouTube video that inspired me to try this! I asked a
> question in the comments, but I think you use a streaming service and so
> must have missed it. I’ve been updating my comments as I go along so others
> have an idea
Hi Josh! It was your YouTube video that inspired me to try this! I asked a
question in the comments, but I think you use a streaming service and so must
have missed it. I’ve been updating my comments as I go along so others have an
idea how to set this up. Thanks for the initial inspiration and
You beat me to it!
I was just setting up a git repo of the files I used and got working.
https://github.com/Grimakis/Tandy-DVI-Gotek/tree/main
One thing I will note, without adding a cskew=1 in my IMG file, I did not
get it to work.
On Mon, May 8, 2023 at 7:09 AM Josh Malone wrote:
> I rece
I recently converted a DVI for Tandy collector. There was a fellow on this
list (I think) who had compatible images but in the end, the collector I
was doing the conversion for supplied working images on a drive. I've
posted it here:
https://drive.google.com/file/d/1cfH6ro03RoDosoi5P2CNwRaErn-vftO
15 matches
Mail list logo