Re: [Mailman-Users] Help with mailman instance in broken state

On 5/15/18 10:27 AM, Kevin Bowen wrote: > >> What's in the various mailman/qfiles/* queues. > > I don't seem to have that directory? I'm running v2.1.9 on RHEL5, do you > know where it would be located? In RHEL, it's /var/spool/mailman/ (see ). >> What's in

Re: [Mailman-Users] Help with mailman instance in broken state

So the issue seems to have resolved itself over night - there's no longer a qrunner process taking 99% cpu, the list's admin interface is accessible, and it's no longer rewriting its config.pck every few seconds, so I think that means the list is now fine (although there hasn't yet been any

Re: [Mailman-Users] Help with mailman instance in broken state

On 5/14/18 7:26 PM, Kevin Bowen wrote: > When I look in > /var/lib/mailman/lists/, > I can see that mailman is continually rewriting config.pck every few > seconds. I think the "duplicate" post I rejected mentioned a qrunner at 99% cpu. Which runner? What's in the various mailman/qfiles/*

[Mailman-Users] Help with mailman instance in broken state

My mailman instance (2.1.9) has gotten into a funky broken state where one of my lists has become inoperable, with a message which should be awaiting moderation, but the moderator never got notified. The list's config appears to be corrupt - attempting to load the admin web interface results in a

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 05:24 PM, George Kasica wrote: Here you go sent to mailt...@netwrx1.org gets me Feb 8 19:11:41 eagle postfix/pipe[25088]: 30CEE121CDE: to=mailt...@lists.netwrx1.org, relay=mailman, delay=0.51, delays=0.15/0.01/0/0.35, dsn=2.0.0, status=sent (delivered via mailman service)

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

To: George Kasica Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/08/2014 05:24 PM, George Kasica wrote: Here you go sent to mailt...@netwrx1.org gets me Feb 8 19:11:41 eagle postfix/pipe[25088]: 30CEE121CDE: to=mailt

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/09/2014 09:50 AM, George Kasica wrote: Mark: Answers to questions below: As to your comment about using hashes for mailman...I'm thinking that might be the best course, and for postfix in general, this s a REALLY small installation as I mentioned and very low traffic realistically.

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

See below -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Sent: Sunday, February 09, 2014 12:05 PM To: George Kasica Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/09/2014 09:50 AM, George Kasica wrote

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/09/2014 10:18 AM, George Kasica wrote: -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Vette = Feb 08 16:12:39 2014 (20887) Message discarded, msgid: 8ec65c559e294241ba9cb4bfa98b6...@bn1pr05mb188.namprd05.prod.outlook.c om Feb 08 16:52:49 2014 (20887)

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/09/2014 04:29 PM, George Kasica wrote: SO what should I be setting here to allow Text only or convert to text only? In pass_mime_types set multipart message/rfc822 text/plain text/html Also set both collapse_alternatives and convert_html_to_plaintext to Yes. -- Mark Sapiro

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

[mailto:m...@msapiro.net] Sent: Sunday, February 09, 2014 6:01 PM To: George Kasica Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/09/2014 10:18 AM, George Kasica wrote: -Original Message- From: Mark Sapiro [mailto:m

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

Of George Kasica Sent: Sunday, February 09, 2014 6:29 PM To: Mark Sapiro Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists OK...Got a bounce back: The message's content type was not explicitly allowed Odd since I'm using outlook2013

[Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

Hello: Currently I've got Postfix running with virtual domains with a MySQL database and am trying to get Mailman to do so as well. I can get one domain to work mailt...@netwrx1.org but anything else is failing as below. Can someone assist? I've loaded the aliases as shown in to mysql and the

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/07/2014 01:59 PM, George Kasica wrote: Hello: Currently I've got Postfix running with virtual domains with a MySQL database and am trying to get Mailman to do so as well. I can get one domain to work mailt...@netwrx1.org but anything else is failing as below. Can someone assist? I've

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

: Mailman-Users [mailto:mailman-users-bounces+gkasica=netwrx1@python.org] On Behalf Of Mark Sapiro Sent: Saturday, February 08, 2014 12:21 PM To: mailman-users@python.org Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/07/2014 01:59 PM, George

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

To: Mark Sapiro; mailman-users@python.org Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists Mark Thanks, sorry on the idiot mistake - OK...I can't read :) Too many hours in front of the screen I corrected the aliases and other items you mentioned here

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 02:39 PM, George Kasica wrote: I can send out messages to the list and they don't show as bouncing in the logs below but I also don't ever see them come back to the list here ... Feb 8 16:12:38 eagle postfix/pipe[21355]: B85CD121CCD: to=skunk-wo...@lists.netwrx1.org,

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 02:44 PM, George Kasica wrote: The ODD part is I have a list here set up as mailtest and its working fine. I don't see any differences in setup. Is there a postfix transport maps entry affecting one of these lists/domains and not the other? -- Mark Sapiro m...@msapiro.net

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/08/2014 02:44 PM, George Kasica wrote: The ODD part is I have a list here set up as mailtest and its working fine. I don't see any differences in setup. Is there a postfix transport maps entry affecting one

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 03:29 PM, George Kasica wrote: This is all the setup doc told me to add: /etc/postfix# cat transport lists.netwrx1.org mailman: This s the other list INSERT INTO aliases (mail,destination) VALUES ('mailt...@netwrx1.org','mailt...@lists.netwrx1.org'), ... I don't

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

not a Postfix or Mailman expert I'm coming from a exim/majordomo environment. George -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Sent: Saturday, February 08, 2014 5:17 PM To: George Kasica; mailman-users@python.org Subject: Re: [Mailman-Users] Help needed Mailman, Postfix

[Mailman-Users] Help with Mailman

I manage a website http://www.gothamnetworking.com that uses Mailman as it's listserv We have over 775 members, 40 groups and run about 146 separate mailing lists Once list in particular is not working and I don't know why. I could use some help. Thanks, Mitch Tobol Gotham Webmaster

Re: [Mailman-Users] Help with Mailman

On 10/10/2012 8:13 PM, Gotham Webmaster wrote: I manage a website http://www.gothamnetworking.com that uses Mailman as it's listserv We have over 775 members, 40 groups and run about 146 separate mailing lists Once list in particular is not working and I don't know why. I could use some help.

Re: [Mailman-Users] Help with MAILMAN list password

Thank you for your help but: 1. I changed the password fot the entire Mailman site with mmsitepass 2. I changed again all lists admin password with change_pw command line, I receive the new password by email without problem 3. I changed in each list Admin Website the moderator and admin

Re: [Mailman-Users] Help with MAILMAN list password

Mauricio Juarez wrote: Thank you for your help but: 1. I changed the password fot the entire Mailman site with mmsitepass 2. I changed again all lists admin password with change_pw command line, I receive the new password by email without problem 3. I changed in each list Admin Website the

Re: [Mailman-Users] Help with MAILMAN list password

On 7/26/2010 11:19 AM, Mauricio Juarez wrote: Thank you for your help but: 1. I changed the password fot the entire Mailman site with mmsitepass 2. I changed again all lists admin password with change_pw command line, I receive the new password by email without problem 3. I changed in each list

[Mailman-Users] Help with MAILMAN list password

password too ( the same) but doesnt work, now the old password and the new one worked Help plz Mauricio -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x

Re: [Mailman-Users] Help with MAILMAN list password

Mauricio Juarez wrote: - I need absolutely change the Admin Lists password - I used the command: change_pw in my /bin Mailman directory, all was OK, I can use my new password for all the lists but My old password work too, do you know why? I change the root password too ( the same) but doesnt

[Mailman-Users] Help with MAILMAN list password

Mauricio Juarez writes: Hi, - I use mailman to administrate my email lists - I need absolutely change the Admin Lists password - I used the command: change_pw in my /bin Mailman directory, all was OK, I can use my new password for all the lists but My old password work

Re: [Mailman-Users] Help with MAILMAN list password

On 7/21/2010 11:21 AM, Mauricio Juarez wrote: - I use mailman to administrate my email lists - I need absolutely change the Admin Lists password - I used the command: change_pw in my /bin Mailman directory, all was My old password work too, do you know why? I change the root password too ( the

Re: [Mailman-Users] Help with MAILMAN list password

On 7/22/2010 8:11 PM, Anthony R. Thompson wrote: On 7/21/2010 11:21 AM, Mauricio Juarez wrote: - I use mailman to administrate my email lists - I need absolutely change the Admin Lists password - I used the command: change_pw in my /bin Mailman directory, all was My old password work too, do

[Mailman-Users] Help with Mailman configuration

I have a mailing list that I need to setup. This mailing list will comprise of several hundred addresses that will be subscribed by using the mass subscription function. I need the following in place: 1) Only admins, moderators and list owner may post to mailing list - all other posts are

Re: [Mailman-Users] Help with Mailman configuration

Keith Blackie wrote: I have a mailing list that I need to setup. This mailing list will comprise of several hundred addresses that will be subscribed by using the mass subscription function. I need the following in place: 1) Only admins, moderators and list owner may post to mailing list - all

Re: [Mailman-Users] Help with Mailman configuration

On Wed, 16 Jun 2010, Keith Blackie wrote: I have a mailing list that I need to setup. This mailing list will comprise of several hundred addresses that will be subscribed by using the mass subscription function. I need the following in place: 1) Only admins, moderators and list owner may post

Re: [Mailman-Users] Help with Mailman configuration

Geoff Mark I appreciate the info. I'll try the settings and see if everything works as I need it to. Thanks Keith Sent: Wednesday, June 16, 2010 12:19 PM Subject: Re: [Mailman-Users] Help with Mailman configuration On Wed, 16 Jun 2010, Keith Blackie wrote: I have a mailing list that I

[Mailman-Users] Help me mailman

I need help on the mailman mailing list. I want to put in the recipient (To) mail subscriber and not the name of the list, which option should I change and where it is configured. thanks for your help -- Atte. Fredy Edgardo Torres Durán www.hostingplusonline.com

Re: [Mailman-Users] Help me mailman

Fredy Edgardo Torres Duran wrote: I need help on the mailman mailing list. I want to put in the recipient (To) mail subscriber and not the name of the list, which option should I change and where it is configured. thanks for your help What you want is on the admin web interface Non-digest

[Mailman-Users] Help with Mailman and Sendmail

Hi, I'm trying to follow the directions for integrating Mailman with Sendmail, but I think they may be incomplete. It looks like there were orginally some instructions directed at installations like mine (a few users, a few mailing lists, *one* computer), and they were entirely replaced by

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: I'm trying to follow the directions for integrating Mailman with Sendmail, but I think they may be incomplete. It looks like there were orginally some instructions directed at installations like mine (a few users, a few mailing lists, *one* computer), and they were entirely

Re: [Mailman-Users] Help with Mailman and Sendmail

Mark Sapiro [EMAIL PROTECTED] writes: Look at the 'automated' method referred to in the FAQ. You may decide you don't need to go the mm-handler route. Mark, thank you! This looks a *lot* easier than what I was trying to do, and perhaps the post even implies that what I was trying to do won't

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams [EMAIL PROTECTED] writes: All that said, the follow-up post really gives me pause: http://mail.python.org/pipermail/mailman-users/2004-June/037543.html Is that a legitimate worry? Whoops, I now see that by this perl script he's referring to mm-handler. Thanks. -- Dave

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: Mark, thank you! This looks a *lot* easier than what I was trying to do, and perhaps the post even implies that what I was trying to do won't work: many people cannot use David Champion's mm-handler due to shared use of domains (what exactly does he mean by shared

Re: [Mailman-Users] Help with Mailman and Sendmail

Mark Sapiro [EMAIL PROTECTED] writes: David Abrahams wrote: Mark, thank you! This looks a *lot* easier than what I was trying to do, and perhaps the post even implies that what I was trying to do won't work: many people cannot use David Champion's mm-handler due to shared use of domains

Re: [Mailman-Users] Help with Mailman and Sendmail

Mark Sapiro [EMAIL PROTECTED] writes: Look at the 'automated' method referred to in the FAQ. You may decide you don't need to go the mm-handler route. Heh, first hurdle: The instructions at http://mail.python.org/pipermail/mailman-users/2004-June/037518.html start with Create

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams [EMAIL PROTECTED] writes: Mark Sapiro [EMAIL PROTECTED] writes: Look at the 'automated' method referred to in the FAQ. You may decide you don't need to go the mm-handler route. Heh, first hurdle: The instructions at

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: Mark Sapiro [EMAIL PROTECTED] writes: Look at the 'automated' method referred to in the FAQ. You may decide you don't need to go the mm-handler route. Heh, first hurdle: The instructions at http://mail.python.org/pipermail/mailman-users/2004-June/037518.html start with

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: Heh, and even if I do that, I don't end up with a /usr/local/sbin/mailman.aliases. You have to create /usr/local/sbin/mailman.aliases with execute permission and containing /bin/cp /usr/local/mailman/data/aliases /etc/mailman.aliases /usr/bin/newaliases It seems like

Re: [Mailman-Users] Help with Mailman and Sendmail

Hi, If it can help. I had problems installing and integrating with sendmail. Culprit was that it needs to know under which group sendmail is used. So, look carefully in your sendmail.cf (DefaultUser) and make sure you compile mailman with the switch to include this group for :

Re: [Mailman-Users] Help with Mailman and Sendmail

Mark Sapiro [EMAIL PROTECTED] writes: David Abrahams wrote: Heh, and even if I do that, I don't end up with a /usr/local/sbin/mailman.aliases. You have to create /usr/local/sbin/mailman.aliases with execute permission and containing /bin/cp /usr/local/mailman/data/aliases

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: Uh-huh. But now I have all the products mentioned in step 5 except for mailman.aliases.db. I guess 2 out of 3 ain't bad, but... any clues? If /etc/mailman.aliases is properly referenced in the sendmail configuration, the /usr/bin/newaliases command in the

Re: [Mailman-Users] Help with Mailman and Sendmail

Mark Sapiro [EMAIL PROTECTED] writes: David Abrahams wrote: Uh-huh. But now I have all the products mentioned in step 5 except for mailman.aliases.db. I guess 2 out of 3 ain't bad, but... any clues? If /etc/mailman.aliases is properly referenced in the sendmail configuration, the

Re: [Mailman-Users] Help with Mailman and Sendmail

Pierre Forget [EMAIL PROTECTED] writes: Hi, If it can help. I had problems installing and integrating with sendmail. Culprit was that it needs to know under which group sendmail is used. So, look carefully in your sendmail.cf (DefaultUser) and make sure you compile mailman with the switch

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams [EMAIL PROTECTED] writes: Yep. I was editing boost.mc so in /etc/mail I did make boost.cf cp boost.cf sendmail.cf make restart Problem solved: I was pointing sendmail at the wrong path for the mailman.aliases file. [/etc/aliases was just a symlink to

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: Say, if I really want to distinguish lists.mydomain.com from mydomain.com, is there any reason I can't still set up a virtual mail host and tack an automated updating of the virtusers file as shown in http://www.ddj.com/dept/architect/184413752?pgno=4 onto

Re: [Mailman-Users] Help with Mailman and Sendmail

David Abrahams wrote: Pardon me, but isn't the GID with which to execute cgi scripts? Or are you saying that mailman's CGI scripts need to execute with the same GID as sendmail? If so, why? Mailman's CGI scripts must run as group 'mailman' (or whatever is specified as the mailman group).

[Mailman-Users] Help with mailman-bounces

One of our lists held an emergency posting because: Reason: Too many recipients to the message How or where is this defined so I can remove this restriction? Thank you, Layne Meier Cox Newspapers -- Mailman-Users mailing list

Re: [Mailman-Users] Help with mailman-bounces

Thank you. On Aug 29, 2006, at 8:14 AM, Peter M Von Büren wrote: Layne Meier wrote: One of our lists held an emergency posting because: Reason: Too many recipients to the message How or where is this defined so I can remove this restriction? it's in the Privacy Options - Recipient

Re: [Mailman-Users] Help with Mailman 2.1 on RedHat 9

On Mon, 2005-05-09 at 20:27 -0700, DJ Freak wrote: I am using the default Mailman 2.1 installed by RedHat. I can manage groups via listinfo in my web browser and even add and remove members to the groups that I create; plus, the mail log indicates that messages are relayed on their

[Mailman-Users] Help with Mailman 2.1 on RedHat 9

Hello to all. It's been a while since I've posted here. I have been very happy with Mailman on OS X Server with much credit going to the kind people on this list. However the chance to move these horrible server fans out of my home has come into my lap and I must grab it. Unfortunately

[Mailman-Users] help with mailman on bluehost.com

Our webhosting software, www.bluehost.com http://www.bluehost.com/ offers us mailman. I want to create multiple mailing lists as a way to send out a daily e-newsletter publication to some different subscriber lists. However, I am finding it very confusing to use. Do you have a support

Re: [Mailman-Users] help with mailman on bluehost.com

Samantha wrote: Our webhosting software, www.bluehost.com http://www.bluehost.com/ offers us mailman. I want to create multiple mailing lists as a way to send out a daily e-newsletter publication to some different subscriber lists. However, I am finding it very confusing to use. Do you

Re: [Mailman-Users] help with mailman on bluehost.com

Our webhosting software, www.bluehost.com http://www.bluehost.com/ offers us mailman. I want to create multiple mailing lists as a way to send out a daily e-newsletter publication to some different subscriber lists. However, I am finding it very confusing to use. Do you have a support Telephone

[Mailman-Users] Help with mailman

Mailman is provided as part of my new hosting package and i run a site for qa new rock band. i need a mailing list with automatic subscription/unsubscribe options that put it in charge of the user, and the ability for only myself to send out mail with gig dates and news etc. Can Mailman do this,

[Mailman-Users] Help with Mailman-2.1.2

Hi all I am new to the mailman environment. I started the installation as indicated in INSTALL, e.g in ROOT, I did the following Created the mailman user and group did acd $prefix chgrp mailman . chmod a+rx,g+ws . In mailman I did the following

Re: [Mailman-Users] Help with Mailman-2.1.2

Dude! When installing from source, don't put the source files into your target directory. Put them in your home directory or in /usr/src/mailman. When you run the install from there, it will create the directories it needs. Once the install is done, you need to run check_perms -f Good Luck -

[Mailman-Users] help with mailman

Hello, I'm trying to set up an 'announce-only' list using mailman, but I can't seem to find this option anywhere on the interface. Can you tell me where it might be located? thank you, Matthew hsu -- Mailman-Users mailing list [EMAIL

[Mailman-Users] Help,, installation mailman

Hi,,, a need some help,,, i was trying install mailman 2.1 in a machine runnig linux 6.2 kernel 2.4.19 but,, i have a problem,, i'm using the INSTALL file included in the mailman2.1.tar.gz,,, but anyways mailman dont work,, help me message error 404 file not found thanks

Re: [Mailman-Users] Help,, installation mailman

How are you trying to access mailman? What URL are you using? You'll want to make sure that you've configured apache to properly handle the CGI requests. On my systems, I access mailman by using the url http://server name/cgi-bin/mailman/command The commands are located in

Re: [Mailman-Users] Help,, installation mailman (fwd)

A. Hinojosa [EMAIL PROTECTED] -- Forwarded message -- Date: Thu, 27 Mar 2003 14:18:27 -0500 (EST) From: Rafael Hinojosa [EMAIL PROTECTED] To: Leonardo O. Aguilar S. [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [Mailman-Users] Help,, installation mailman

[Mailman-Users] help with mailman

I could use a little help please I would like the “to” to show the actual recipients email address And the “from” to show the actual senders email address i am getting the list names in both these lines What settings should I change? Thanks AP

[Mailman-Users] Help with mailman and postfix

I recently switched from Sendmail to Postfix running on Mailman 2.1b3 Red Hat 7.3 and I followed all the instructions in the README.POSTFIX file. I've got the aliases located in /home/mailman/data and mailman as the mail-gid, not using virtual domains. Turned off Sendmail and turned on Postfix

Re: [Mailman-Users] help on Mailman feature

If you have command line access then export them from your access database to a text file, one mail address per line and use $prefix/bin/add_member, $prefix/bin/sync_members or $prefix/bin/remove_members. Use the -h command line option to get help for the script concerned. At 16:40

[Mailman-Users] help on Mailman feature

Hi, is there any way to import multiple email addresses into a Mailman mailing list? I have a list of email addresses in an Access database and want to know if I can import them in a batch instead of entering them one per line through web GUI. Thanks a lot! Jin

Re: [Mailman-Users] help on Mailman feature

On Mon, 24 Jun 2002, Jin Zhang wrote: Hi, is there any way to import multiple email addresses into a Mailman mailing list? I have a list of email addresses in an Access database and want to know if I can import them in a batch instead of entering them one per line through web GUI. Yes, go

[Mailman-Users] Help Installing Mailman

Hi, I'm attempting to install Mailman 2.0.8 on Debian GNU/Linux 2.2 and am having problems. The install seemed to go smoothly up until I created the test list. That seemed to go ok and I got an email from mail-owner about the new list including the URLs of the two web pages. However when I try

[Mailman-Users] Help installing MailMan on RedHat 7.1 Linux

Hi guys, First of all my deepest sympathies ... the Mexican Family is highly tied to the United States and feel it’s own brothers and sisters where the victims in this barbaric act. If it’s possible I need some help for Mailman setting up. I’m receiving a CGI error when I try to open a mailing

[Mailman-Users] help installing Mailman

Where might I find someone to walk me through the set up of the program? I've read all the instructions and read me files, but I'm still lost. I didn't realize it was going to *this* difficult! Thank you for your time. -- Becky --

Re: [Mailman-Users] help installing Mailman

On Thursday 26 April 2001 05:05 am, Becky Wilson wrote: Where might I find someone to walk me through the set up of the program? I've read all the instructions and read me files, but I'm still lost. I didn't realize it was going to *this* difficult! Thank you for your time. Well, first off,

[Mailman-Users] Help needed: Mailman v1.1 doesn't recover lockfile

I have two lists running with Mailman. One works, the other broke. The one that is broken seems not able to recover a lockfile. I've sent a bug report to SourceForge but I need to get the list running again ASAP. Has anyone seen this before? Bug in Mailman