Yes, ide vs scsi benchmarks are usually skewed due to caching.
SCSI disables
drive cache by default whereas IDE enables it by default.
Yes, I disable caching. So I get (really) bad performance.
I see the other thread about some broken MegaRaid i4.
What I can say is taht with 3.8-release, I
Hi again,
How can one see community tags associated to a route ?
BR,
--
Sylvain COUTANT
ADVISEO
http://www.adviseo.fr/
http://www.open-sp.fr/
I was just about to create a new thread when I read :
I have not seen it discussed much on the list, but OpenBGP works *very*
well and is easy to setup using Hurricane Electrics free (ipv6-in-ipv4)
I try to setup a BGP peering with upstream and I have (v3.8) :
Jan 7 10:11:19 r2 bgpd[31645]:
Hello Claudio,
I just tried a filter like this:
match from any AS 29166 set nexthop blackhole
and that did work:
Yes. I have run more tests since my previous post, and filter apply the
blackhole tag to the route. But packet were still forwarded.
After having stopped the session and
Hello dear OpenBSD friends.
I have just upgraded my 3.8 release CD install trough CVS to the stable
branch (OPENBSD_3_8)( src, ports and XF4). I have rebuilt my kernel, the
userland and X Window. Everything runs fine and smoothly as expected. I
also removed the installed packages and I am
Hi,
I'm setting up NIS for my home network using OpenBSD on the
server-side. However, when I try to make changes (ie. to the
passwords) on the client side (Gentoo Linux) it responds with an error
(without any information on what that error is). Upon attempting to
do the same operation on the
On Sat, 7 Jan 2006, Lachlan Gunn wrote:
Hi,
I'm setting up NIS for my home network using OpenBSD on the
server-side. However, when I try to make changes (ie. to the
passwords) on the client side (Gentoo Linux) it responds with an error
(without any information on what that error is). Upon
On Sat, Jan 07, 2006 at 10:12:10AM +0100, Ramiro Aceves wrote:
Hello dear OpenBSD friends.
I have just upgraded my 3.8 release CD install trough CVS to the stable
branch (OPENBSD_3_8)( src, ports and XF4). I have rebuilt my kernel, the
userland and X Window. Everything runs fine and smoothly
Try:
announce IPv4 unicast
announce IPv6 unicast
Glenn
I was just about to create a new thread when I read :
I have not seen it discussed much on the list, but OpenBGP works *very*
well and is easy to setup using Hurricane Electrics free (ipv6-in-ipv4)
I try to setup a
Hello Sylvain,
I just tried a filter like this:
match from any AS 29166 set nexthop blackhole
and that did work:
Yes. I have run more tests since my previous post, and filter apply the
blackhole tag to the route. But packet were still forwarded.
After having stopped the session and
On Sat, Jan 07, 2006 at 10:58:05AM +0100, Sylvain Coutant wrote:
Hi again,
How can one see community tags associated to a route ?
I have a diff to show communities in bgpctl output but I don't like it.
Need to redo some parts of it before it can be commited.
The next release will have this
I was talking about the cache on the disks, not on the controller. The issues
you experienced were due to the OpenBSD driver not marking the i4 as broken.
The workaround code is now in tree implying that only 1 IO can be outstanding
and bioctl will no longer function. So update to the latest
[IMAGE]
[IMAGE]
Borghi Toscani | E - mail | Registrati | Inserisci un locale | Meteo |
News
[IMAGE]
NUOVI
INSERIMENTI
Newsletter della 2B0 settimana 2006
LINK
CONSIGLIATI
Podere gli Olmi
LAST MINUTE IN TOSCANA
OFFERTE SOGGIORNI IN TOSCANA
OFFERTE LAST MINUTE FIRENZE
Last Minute Abetone
hi misc,
i have installed a new firewall with my new WRAP board. and have tried the
new
in-kernel pppoe. and i had a problem with the mtu/mss. i have set the pf.conf
entry scrub out on pppoe0 max-mss 1440. and also have put the mtu on the
internal nic to 1492. but no success.
after some googling i
On Sat, Jan 07, 2006 at 05:49:34PM +0100, Thomas Schoeller wrote:
hi misc,
i have installed a new firewall with my new WRAP board. and have tried the
new
in-kernel pppoe. and i had a problem with the mtu/mss. i have set the pf.conf
entry scrub out on pppoe0 max-mss 1440. and also have put the
Dear folks,
i am trying to figure it out whether OpenBSD support T/TCP or not, but
until so far, i could not see.
Thanks in advance.
i am trying to figure it out whether OpenBSD support T/TCP or not, but
until so far, i could not see.
T/TCP is fundamentally broken as discovered by Newsham and Ptaceck in
1998 or so. So, no.
On Saturday, 7 January 2006 at 20:29:50 +, Pavel M. Ivanchev wrote:
I have just installed sarg 2.1 on OpenBSD and everything during build was
ok. I applyed all the patches also. The probles is when i start sarg to
build report i have this output:
SARG: Records in file: 1842,
i am trying to figure it out whether OpenBSD support T/TCP or not, but
until so far, i could not see.
T/TCP is fundamentally broken as discovered by Newsham and Ptaceck in
1998 or so. So, no.
Ah, or maybe it was route who found it:
Hello all,
I have an older i386 pc that I've been using as my home firewall for some
years now. It currently runs 3.3 and I was hoping to do an upgrade, so I
did go ahead and buy the full CD set (impressive packaging, btw) after
having trouble with boot floppies (marginal drive) and the boot
I'd like to apologize to all.
Fortune told me yesterday that assumptions are the mother of all
screw-ups.
I assumed I was educated about the subject. I was not.
I forget it's not my tree.
I assumed that the OpenBSD developers desired cryptographic disks. There
may be a want for them, but its
On Sat, 07 Jan 2006 00:42:18 -0500
Nick Holland [EMAIL PROTECTED] spake:
Bill wrote:
I found one of my firewalls has a 4Gig drive. While it is still
working fine, I am thinking maybe I should remove the 10 year old thing
and maybe move it somewhere a little less stressed).
I googled
OpenBSD AFAIK never had T/TCP implemented. FreeBSD had. but what the heck:
http://www.freebsd.org/releases/6.0R/relnotes-i386.html
...RFC 1644 T/TCP support has been removed. This is because the
design is based on a weak security model that can easily permit
denial-of-service attacks. This TCP
May be I wrote in wrong place, excuse me... :)
I've standard openbsd-3.8 on i386 machine.
I've compiled verlihub (dc++ hub - http://verlihub.sourceforge.net/).
In installation of this hub there are some plugins, which are shared
libraries and loaded when hub starts, but this plugins weren't linked
Hello,
I am attempting to install OpenBSD 3.8 on an IBM Netfinity 4000R
server. This is a dual PIII 650 MHz machine with 1 GB of RAM.
I can boot bsd.mp / GENERIC.MP successfully, but dmesg only shows cpu0
as being found, no sign of cpu1.
The BIOS claims both CPUs to be installed and working.
I
On Sun, Jan 08, 2006 at 01:58:19AM +0300, Dmitij Lebed wrote:
May be I wrote in wrong place, excuse me... :)
I've standard openbsd-3.8 on i386 machine.
I've compiled verlihub (dc++ hub - http://verlihub.sourceforge.net/).
In installation of this hub there are some plugins, which are shared
We're getting about halfway between releases, and around now it is
nice for us to see what kind of hardware people are seeing out there,
and how well it is supported.
If people have 3.8 dmesg's that they can mail in to
[EMAIL PROTECTED]
that would be much appreciated.
If they are able
Hello. I am hoping that someone here can help me. I have tried getting help
on the horde lists, but no one answers me.
I have installed horde 3.0.9 on my openbsd 3.8 system with an apache chroot
jail. I have most things working now, but there are a few problems.
I noticed that when
Stupid mistake...
Never mind... It works.
Chris wrote:
Hello. I am hoping that someone here can help me. I have tried getting help
on the horde lists, but no one answers me.
I have installed horde 3.0.9 on my openbsd 3.8 system with an apache chroot
jail. I have most things working now,
Greetings,
I am trying to install OpenBSD 3.8 on an old server that I have lying
around. I boot the 3.8 floppy (the system does not have a CDROM drive) and
see the following pertinent bits fly by in dmesg:
ahc1 at pci2 dev 14 function 0 Adaptec AHA-29160 U160 rev 0x02: irq 10
scsibus0 at ahc1:
Hi
I have Tyan Tomcat i7230A (S5160)
But OpenBSD can not install
Can you make i386 version support it?
How can add raid device for SATA Harddisk?
Processor
. Single Socket-T (LGA775 Socket)
. Supports Intel. Prescott/Smithfield/Cedar Mill
(Pentium. 4 w/ HT or Pentium. D) processor;
Compiling a kernel fails. I just updated my tree about an hour
ago from anoncvs1.ca.openbsd.org.
Some changes require people to delete their compile/KERNEL/lib directory
and it's contents.
There are other parts of tree that care less.
32 matches
Mail list logo
