I'm running 0.16, and have a pretty stable system. I used to have some
video problems, but they all went away when I upgraded from a Gforce
MX 440 to a 5200. The only significant problem I'm currently seeing is
that when I'm in the Program guide, the preview window only shows
about the left 2/3 of
Around about 07/02/05 02:45, Dan Christensen typed ...
The GUI window (but seemingly only the settings pages) hangs off the
bottom of the screen, often hiding some of the help prompt and the
next/back/[something else] buttons.
The same happens for me. I asked about it on this list a week or
Hi,
I've installed mythtv (both tried latest stable as well as CVS) for use
with a budget DVB-T card; the setup for that was succesfull.
I've scanned the channels for my area (gothenburg, Sweden) with
mythtv/setup/setup by selecting the appropriate transponders. This also
went fine; I even
On Sun, Feb 06, 2005 at 12:44:38PM +0100, Jens Baumeister wrote:
On Sun, 6 Feb 2005 04:07:08 -0700, Russ Dill [EMAIL PROTECTED] wrote:
When telling mythweb to record any showing of the movie Lilo
Stitch, it also decided to record every episode of the cartoon Lilo
Stitch. I'm not sure
Sorry for the spam - we've changed the config of the mailing list around a
bit, and I need to test the latency now..
Isaac - just FYI, I think there is a bug in the mailing list where it
doesn't send you copies of your own postings. Even if you tell it to
in the preferences page.
Not a major
On Sun, Feb 06, 2005 at 07:56:30PM +0100, Felix Huttmann wrote:
Hi,
I have another problem. Have selected a channel were I get no signal.
Can anybody say me how I can switch the channel back to a working
one,
so that I can watch TV as before :-/?
Selecting watch TV doesn't let me
On Sun, 6 Feb 2005 22:46:26 +0100 (CET), Hugo van der Kooij
[EMAIL PROTECTED] wrote:
On Sun, 6 Feb 2005, Felix Huttmann wrote:
- remove the broken channel from the list.
( I don't know how to remove channels in the channel editor, so I edit
its number to something 1000 )
If you
Hi Isaac,
Doesn't matter ... one or some days later, better have a little bit stabler
release :-) ...
Is it possible to get a small preview (changelog) of the main new functions
and a main error corrections sicnce 0.16 ... will be very nice :-)
My main question: is there any kind of dvb-c
On Mon, 2005-02-07 at 10:28 +0100, Berend van Wachem wrote:
Hi,
I've installed mythtv (both tried latest stable as well as CVS) for use
with a budget DVB-T card; the setup for that was succesfull.
I've scanned the channels for my area (gothenburg, Sweden) with
mythtv/setup/setup by
On Mon, 2005-02-07 at 10:45 +0100, Mardin wrote:
Hi Isaac,
Doesn't matter ... one or some days later, better have a little bit stabler
release :-) ...
Is it possible to get a small preview (changelog) of the main new functions
and a main error corrections sicnce 0.16 ... will be very
Isaac Richards wrote:
And I'm going to push it back a few days. A lot of stuff went in recently,
and just to be safe... I'm thinking Wednesday or Thursday night, unless
something turns up.
Awww
But seriously, it's good to see this, Isaac. I'd rather wait a few days
than have to upgrade
Gavin Hurlbut [EMAIL PROTECTED] wrote
First off, it's mythweb, not webmyth. Several of us are only reading
threads
about stuff we are working on or are interested in... Chris may well
miss the thread.
Don't shoot the messenger! that was my fault, careless sorry. I take your
point about
John Pullan wrote:
On Mon, 2005-02-07 at 10:28 +0100, Berend van Wachem wrote:
Hi,
I've installed mythtv (both tried latest stable as well as CVS) for use
with a budget DVB-T card; the setup for that was succesfull.
I've scanned the channels for my area (gothenburg, Sweden) with
I have a AMD Sempron 2600
What is the optimal -march setting in settings.pro ?
I tried -march=pentiumpro mmmx but that is no good - had to remove the
-mmmx to avoid hang.
Sigurd
___
mythtv-users mailing list
mythtv-users@mythtv.org
On Mon, 2005-02-07 at 10:55 +0100, Berend van Wachem wrote:
John Pullan wrote:
You really shouldn't need to edit dvb channels. It's all done auto-
magically. Is there a particular reason for doing this ?
Thanks for your help! It makes more sense now.
Some channels found in the
There have been a number of posts in the past explaining about how
MythTV is at its best at a X resolution of 100 dpi. However, the
startup scripts for X are buried so deep amongst so many dependencies
it's a bit of a nightmare trying to find out where and how X is
actually started.
On my FC2
On Sun, 6 Feb 2005 11:20:09 +0100, Jens Baumeister
[EMAIL PROTECTED] wrote:
I hacked up a quick perl script to show sender and subject of the 5
most recent mails on a POP account in a scroller via mythtvosd.
I made a typo in the script:
Change this line
if ($top[7] =~ /mythfrontend/ ||
Up until a couple of days ago, my 150MCE (PAL) was working fine in
MyhtTV. To see if the bad quality of the image was caused by the
card, I borrowed a card from a friend but I got the same results. I
put back my own card but now it seems to have stopped working in
MythTV.
Using ptune and dd to
Hi,
does anyone know if there is any way to get decent meta-data for
German TV? Both tv_grab_de_tvtoday and tv_grab_dvb aren't really doing
well in that regard. (Movies are hardly labeled as such, and most of
what is labeled as a movie isn't one, most of the other fields are
completely unreliable
On Mon, 7 Feb 2005 12:15:27 +0100, Jens Baumeister
[EMAIL PROTECTED] wrote:
does anyone know if there is any way to get decent meta-data for
German TV?
I think my nxtvepg EPG solution was working quite good with all the
meta-data stuff. But it looks like your're using DVB. Nxtvepg only
works
Hello,
i have the same problem. I have ~15.000 mp3s and mythfrontend close if i
want to update the music db. I got an error messages like this: ***
glibc detected *** free(): invalid next size (fast): 0x09f4d0d0 *** . If
i choose a music directory with less files mythmusic add all files but i
On Mon, 7 Feb 2005 10:45:48 +0100, Mardin [EMAIL PROTECTED] wrote:
Is it possible to get a small preview (changelog) of the main new functions
and a main error corrections sicnce 0.16 ... will be very nice :-)
Take a look at: http://www.mythtv.info/moin.cgi/UnderDevelopment
My main
Hi Donavan,
Thanks ... Ohhh where are my eyes ... sorry for overseeing it :-)
I'm waiting for this nice new features ...
Martin
Am Montag, 7. Februar 2005 12:41 schrieb Donavan Stanley:
On Mon, 7 Feb 2005 10:45:48 +0100, Mardin [EMAIL PROTECTED] wrote:
Is it possible to get a small preview
On Tue, Feb 01, 2005 at 12:30:02AM -0700, Jim wrote:
For tv-out of SDTV, you can use a much cheaper card than that.
I can get that card for 88 us dollars and it seems to be a good
price I will look for less expensive cards but it seems the cards 20
$ less have 1/2 the memory.
You are
On Mon, 7 Feb 2005 03:40:42 -0600, Andy Long [EMAIL PROTECTED] wrote:
On Sun, 6 Feb 2005 22:46:26 +0100 (CET), Hugo van der Kooij
[EMAIL PROTECTED] wrote:
On Sun, 6 Feb 2005, Felix Huttmann wrote:
- remove the broken channel from the list.
( I don't know how to remove channels in the
First I get a file opening problem with avidemux2 with an original file. So I
tried a transcoded file (MPEG with MP3) and this is working.
But the HowTo seems to be very old. There is not button Save Raw Video
Stream in version 2.0.36 anymore. So I tried there the codecs DVD and FFm
MP2.
I'd
Bene Martin wrote:
Try removing the redirects to /dev/null from mpeg2cut for
the avidemux2
commands to see what's going wrong.
Here's my output... It's long, sorry.
... and here's the output from tcprobe -i
I thought someone posted this to the list a while back, but looking
through the support docs on haupaugge's website, their FAQ on capturing
pretty much talks only about capture at 320x240 which may or may not be
the theoretical max that you need but it sure lends some credence to
the
Thanks for that. I will try it later to see if it helps with my
problem. I have been struggling with getting the fonts sized
correctly. I started by first correcltly setting the top left corner
of the screen, then I did the width and finally the height. Now even
though it is perfectly size, I
It most definitely is not. I don't have any links on hand, but
vertical resolution (because of how the signal is transmitted -- the
analog signal is a continous wave with points at regular intervals at
certain points marking the point where fields begin/end) is ALWAYS
bang-on 480 regardless of
On Sun, 06 Feb 2005 10:34:32 -0600, Greg Thoreson [EMAIL PROTECTED] wrote:
No longer stumped. I replaced my Ethernet hub with an Ethernet switch
and all my problems went away
It seems that watching TV is a little more forgiving than watching
Recordings
I have been watching this
Fantastic, I was going to do something like this myself.
One thing: how much work would it be to have the album cover as a
method of selecting the album you want to play? That's the one thing
that's really bugging me :-)
Andrew
___
mythtv-users
Some more info. This is what the backend is showing when I try to
watch live-tv. When I stop MythTV (backend and frontend) and try
capturing video with dd, it just fails. I unload the drivers, reload
them and dd works again.
2005-02-07 15:17:07.374 13 ACCEPT[]:[]14
2005-02-07 15:17:07.379
I'm setting up a mythtv box to (initially) record off my satellite
box (UK; Sky digibox), but I can't get mythtv to change the channel on
my box.
I've a red-eye serial cable to control the thing, with a little
script 'skychannel' in /usr/local/bin to break the channel no. down,
turn on
Hello,
I want listen to music when I use MythGallery or MythWeather.
It is possible? And How?
Thank's
--
Eric JANTZEN
Lyon
FRANCE
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
On Sun, 06 Feb 2005 14:07:14 +0100, Sigurd Nes [EMAIL PROTECTED] wrote:
Is it possible to invoke nuvexport from mythtv? - I can't find any menus
Unfortunately, no, it's not possible.
Assuming nuvexport is in your path, go to the command line and type nuvexport.
Lane
--
Meetup with other Myth
Is it possible to save the downloaded coverart in the directorie of the
music files.
I've set album art as display in mythmusic, so you see the cover when
playing the music.
Patrick
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Namens Andrew Wilson
On Sun, 6 Feb 2005 11:09:23 -0600, Loren H. Burlingame
So what is multiply? What are its advantages?
looks like a friendster clone to me.
I don't want this thread to hijack the techie talk, but figured I'd at
least answer this. If this thread is going to go any further I'd
prefer answering
Phil I thought that at first too. I think it is a gmail thing, the way
they file your reply in the discussion before you receive it. I could
be wrong though.
On Mon, 7 Feb 2005 20:32:16 +1100, Phill Edwards [EMAIL PROTECTED] wrote:
Sorry for the spam - we've changed the config of the mailing
Sounds very similar to my situation, apparently no one can or will help
us. We either are asking a stupid trivial question or it is too
complicated for help. Either way, it sure would be nice if someone would
point us in the right direction.
-r
-Original Message-
From: [EMAIL PROTECTED]
sorry, question was asked to fast.
I see the option is covered, but it is not working.
Is see in my browser all the nice thumbnails, but the album-covers are not
saved/downloaded anywhere.
Gr.
Patrick
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Mon, 7 Feb 2005 08:52:14 -0600, John Williams
[EMAIL PROTECTED] wrote:
Phil I thought that at first too. I think it is a gmail thing, the way
they file your reply in the discussion before you receive it. I could
be wrong though.
On Mon, 7 Feb 2005 20:32:16 +1100, Phill Edwards [EMAIL
I've been lurking on the list for a while, trying to figure out the
best/least expensive way to get started with MythTV. I have a P4 1.8Ghz
system that I will be using, it has a 20GB drive and a DVD writer
already. So, I finally sold some old stuff on ebay and built up about
$400 to spend on new
John Pullan wrote:
You really shouldn't need to edit dvb channels. It's all done auto-
magically. Is there a particular reason for doing this ?
Thanks for your help! It makes more sense now.
Some channels found in the scan do not seem to work. For instance, the
teletext channels found in the
Greetings,
Since your remote frontends and mplayer play captured sound, I would
check the mixer settings. It could be that the 'Line-In' is muted or the
input level set too low to be audible.
Cheers,
Les Gondor
Dave wrote:
Hi,
I'm having problems with audio on my mythtv rig.
I have a shared
On 2/7/2005 10:28 AM, Cook, Garry wrote:
In looking for PVR250s, I think that I'm supposed to steer clear of the
Roslyn cards and possibly the MCEs. However, some of the PVR250s have
component (or RCA) connectors for the audio, and some have small audio
Careful of the use of component it
On Mon, 7 Feb 2005 08:28:41 -0700, Cook, Garry [EMAIL PROTECTED] wrote:
I've been lurking on the list for a while, trying to figure out the
best/least expensive way to get started with MythTV.
welcome. :) i did/do the same thing. ;)
I've burned Knoppmyth to CD and plan to boot the machine
http://gmail.google.com/support/bin/answer.py?answer=6588topic=40
Q: I expected to find a message in my inbox, but it's not there. Is
something wrong?
A: Probably not. When you send a message to any mailing list you
subscribe to, Gmail automatically skips your inbox and archives the
message to
On Mon, 07 Feb 2005 14:23:16 +, Neil Bird [EMAIL PROTECTED] wrote:
I'm setting up a mythtv box to (initially) record off my satellite
box (UK; Sky digibox), but I can't get mythtv to change the channel on
my box.
I've a red-eye serial cable to control the thing, with a little
On Mon, 7 Feb 2005 10:10:41 -0600, Andy Long [EMAIL PROTECTED] wrote:
On Mon, 07 Feb 2005 14:23:16 +, Neil Bird [EMAIL PROTECTED] wrote:
I'm setting up a mythtv box to (initially) record off my satellite
box (UK; Sky digibox), but I can't get mythtv to change the channel on
my box.
Joe Votour [EMAIL PROTECTED] writes:
Increase your screen resolution, and you shouldn't
have any problems.
Not sure what you mean here. I'm using TV out with a PVR-350.
I didn't think I had a choice about the resolution.
Also, it could be an issue with your X server font size.
Again, not
See inline.
-- Joe
--- Dan Christensen [EMAIL PROTECTED] wrote:
Joe Votour [EMAIL PROTECTED] writes:
Increase your screen resolution, and you shouldn't
have any problems.
Not sure what you mean here. I'm using TV out with
a PVR-350.
I didn't think I had a choice about the
At 11:27 AM -0500 2/7/05, Dan Christensen wrote:
Joe Votour [EMAIL PROTECTED] writes:
Increase your screen resolution, and you shouldn't
have any problems.
Not sure what you mean here. I'm using TV out with a PVR-350.
I didn't think I had a choice about the resolution.
On the 350 there's
At 8:25 AM -0500 2/7/05, Gary McMeekin wrote:
Thanks for that. I will try it later to see if it helps with my
problem. I have been struggling with getting the fonts sized
correctly. I started by first correcltly setting the top left corner
of the screen, then I did the width and finally the
I am determined to get this working on my phone and I have been hacking
and slaying the wap theme all weekend to do so. I now have
program_listing, channel_details, program_details, and search all working
from a desktop wml browser, but not quite working from my phone which is
very picky about
Ok, what I've done so far:
- running latest CVS of MythTV (compiled couple of hours ago)
- dropped mysql database and re-created it from scratch
Watching TV on the 150 (via 350 output) worked fine. I changed the
recording profiles from 480x480 to 720x576 and that seems to cause the
150 to hang.
Hi,
(Eagerly awaiting the new 0.17 release so thought I would get a few things
sorted before it's out.)
When using native LIRC with MythTV (I have ~/.lircrc symlinked to
~/.mythtv/lircrc) am I correct in thinking that when you want to add/amend a
current remote binding (e.g. I'm using Jarod's
On Monday 07 February 2005 12:45 pm, Nick Rosier wrote:
Ok, what I've done so far:
- running latest CVS of MythTV (compiled couple of hours ago)
- dropped mysql database and re-created it from scratch
Watching TV on the 150 (via 350 output) worked fine. I changed the
recording profiles from
Hi,
I said no guarantees!
It should be saving the file folder_large.jpg directly into your
music folders, e.g.:
/myth_media/music/Artist_Name/Album_Name/folder_large.jpg
I assume php isn't throughing up loads of warnings, so permissions
must be right directories must exist.
To check: next to
Make sure that you've set yourself up to capture at that size in IVTV.
ivtvctl -f width=720,height=576
My capture card would hang as well if I was trying to capture an image
larger that what IVTV was setup to capture.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Epox 8RDA3+, 2500+ Mobile, 512 of 2700 DDR, GF4 MX 440, Hauppaugge
PVR-350, Air2PC.
My goal today is to rebuild a FE/BE combined unit (to be seperated
shortly down the road) from the ashes of a FC2 box which died a tragic
and horrible death 10 days ago. It was a Soyo Dragon (SY-K7V) 1600+
On Mon, 7 Feb 2005 12:46:59 -0500, Isaac Richards [EMAIL PROTECTED] wrote:
On Monday 07 February 2005 12:45 pm, Nick Rosier wrote:
Ok, what I've done so far:
- running latest CVS of MythTV (compiled couple of hours ago)
- dropped mysql database and re-created it from scratch
Watching
On Mon, 7 Feb 2005 17:45:23 -, Nick [EMAIL PROTECTED] wrote:
Hi,
(Eagerly awaiting the new 0.17 release so thought I would get a few things
sorted before it's out.)
When using native LIRC with MythTV (I have ~/.lircrc symlinked to
~/.mythtv/lircrc) am I correct in thinking that when
Ol' Schoola wrote:
Epox 8RDA3+, 2500+ Mobile, 512 of 2700 DDR, GF4 MX 440, Hauppaugge
PVR-350, Air2PC.
My goal today is to rebuild a FE/BE combined unit (to be seperated
shortly down the road) from the ashes of a FC2 box which died a tragic
and horrible death 10 days ago. It was a Soyo Dragon
Ol' Schoola wrote:
Epox 8RDA3+, 2500+ Mobile, 512 of 2700 DDR, GF4 MX 440, Hauppaugge
PVR-350, Air2PC.
My goal today is to rebuild a FE/BE combined unit (to be seperated
shortly down the road) from the ashes of a FC2 box which died a tragic
and horrible death 10 days ago. It was a Soyo Dragon
I'd also like to start from scratch (switch to a different distro),
but my old box is still working fine (0.15/FC1). However I don't want
to lose all my .nuv files and my old recorded history.
I can move my .nuv files over without a problem. For the database, is
anything special I have to do,
Hmmm, OK now I'm a bit better off on the dark scenes. I set it to record
by default as:
320x256 mpeg4, bitrate = 2200 (scaled from 640x480)
with the interlaced and high performance settings turned on (I've got a
1.6 P4 so I figure I have the processor to burn).
I've noticed a few things from
Bruce Smith wrote:
I'd also like to start from scratch (switch to a different distro),
but my old box is still working fine (0.15/FC1). However I don't want
to lose all my .nuv files and my old recorded history.
I can move my .nuv files over without a problem. For the database, is
anything
In regard to your issue:
Hi, I'm having problems with audio on my mythtv rig. I have a shared frontend/backend as a main machine with a PVR350 which provides video out. I run the audio out of the 350 into the sound card and the sound card into my receiver. However I do not get any sound in
I've noticed a few things from these settings and from watching this
discussion. First of all while the dark scenes are definitely better I
notice that when the scene is moving fast I now get interlaced type
lines showing up. Am I correct in assuming then that I should not be
selecting
Paul Gratz wrote:
Hmmm, OK now I'm a bit better off on the dark scenes. I set it to record
by default as:
320x256 mpeg4, bitrate = 2200 (scaled from 640x480)
with the interlaced and high performance settings turned on (I've got a
1.6 P4 so I figure I have the processor to burn).
I've noticed a
Since I've had tons of trouble exporting my PVR-250 recordings to DVD
(see archives for my posts on audio sync issues), I'm trying out my
options for my older WinTV-FM card, which is also in my Myth box.
I recorded a half hour test program in Myth using the WinTV-FM. I then
used nuvexport to
On Mon, 7 Feb 2005 09:51:55 - (GMT), Dr. N. Andrew Swain
[EMAIL PROTECTED] wrote:
Gavin Hurlbut [EMAIL PROTECTED] wrote
First off, it's mythweb, not webmyth. Several of us are only reading
threads
about stuff we are working on or are interested in... Chris may well
miss the thread.
The .17 release mentioned an infinite loop fix that was causing
crashes on watchtv and watch recording - do you think this could be
what we're looking for?
___
mythtv-users mailing list
mythtv-users@mythtv.org
Cecil Watson wrote:
My goal today is to rebuild a FE/BE combined unit (to be seperated
shortly down the road) from the ashes of a FC2 box which died a tragic
and horrible death 10 days ago. It was a Soyo Dragon (SY-K7V) 1600+
which performed admirably over it's four year lifespan.
Observing a
On Feb 7, 2005, at 12:12 PM, D. wrote:
In regard to your issue:
> Hi,
>
>I'm having problems with audio on my mythtv rig.
>
>I have a shared frontend/backend as a main machine with a PVR350 which
>provides video out. I run the audio out of the 350 into the sound card
>and the sound card
Ha! serves me right for not updating with CVS first. I now see there is
a new wml theme. I will get CVS working, get up to date and then see
if there is still anything I can offer. Sorry about that.
Andy Swain
Joe Buckshin wrote:
On Mon, 7 Feb 2005 09:51:55 - (GMT), Dr. N. Andrew Swain
I have a FX 5500 SVIDEO out to my 27 Sony TV. it's not HD. I have
been looking into modeline settings, I really have no idea what I'm
doing with it. It somewhat seems like something I need, Can anyone
tell me what I should be setting as far as modeline line in my xorg.conf
file. Again
On Mon, 7 Feb 2005 13:04:01 -0800, Dave [EMAIL PROTECTED] wrote:
On Feb 7, 2005, at 12:12 PM, D. wrote:
In regard to your issue:
Hi,
I'm having problems with audio on my mythtv rig.
I have a shared frontend/backend as a main machine with a PVR350 which
provides video out. I
The generic approach to getting tv out cards to work is usually 800x
600 or 640x480 resolution with 24bpp and 60 hz refresh rate. You then
connect the svideo card to your tv and remove any monitor connections
and reboot your pc. With any luck the bios display will show up on the
tv and later
NEW FEATURE question
Did I read right that I will be able to make a playlist of shows and
have them show all consecutively?
If I read that correctly... I want to thank whoever implemented this
feature. I had requested it a while back
Even more my kids thank you
MYTHTV ROCKS
Kristian Kalweit wrote:
Enable the DEBUG Output in siparser.cpp and look in your backend log.
There should be EPG output in the first 2-3 minutes after switching
channel.
Must I to uncomment the row 13 of siparser.cpp:
// Set EIT_DEBUG_SID to a valid serviceid to enable EIT debugging
//#define
As they said above... using Mythweb config as a guide of what keys do
what, then simply edit your config file. The S key will bring up
the guide directly.
On Sun, 6 Feb 2005 22:32:47 -0600, Andy Long [EMAIL PROTECTED] wrote:
Quite simple. In your ~/.myhttv/lircrc file, look for whatever your
Bruce Smith wrote:
I'd also like to start from scratch (switch to a different distro),
but my old box is still working fine (0.15/FC1). However I don't want
to lose all my .nuv files and my old recorded history.
I'm not planning on retaining the database although I have it backed up.
I do want
I've spent the last 1+ hrs looking through the archives looking for the
answer to a simple question. Can knoppmyth be configured to run off the
cd with the nvidia drivers already setup?
Thanks...
Calvin...
___
mythtv-users mailing list
Kevin Wentland wrote:
NEW FEATURE question
Did I read right that I will be able to make a playlist of shows and
have them show all consecutively?
If I read that correctly... I want to thank whoever implemented this
feature. I had requested it a while back
Even more my kids thank
Since you can remaster your own variation of knoppix and presumably
knoppixmyth the answer is certainly yes. Would it be easy? Probably not.
I made a bootable distribution of gentoo awhile back and it took quite
some time to work out the details. Just making a change to knoppixmyth
should
On Mon, 07 Feb 2005 16:50:05 -0500, Calvin Harrigan
[EMAIL PROTECTED] wrote:
I've spent the last 1+ hrs looking through the archives looking for the
answer to a simple question. Can knoppmyth be configured to run off the
cd with the nvidia drivers already setup?
Calvin,
i don't have a quick
Preach on brother.
Perfection.
On Mon, 07 Feb 2005 15:57:21 -0600, Kevin Kuphal [EMAIL PROTECTED] wrote:
Kevin Wentland wrote:
NEW FEATURE question
Did I read right that I will be able to make a playlist of shows and
have them show all consecutively?
If I read that
I've been searching the list for answers to a problem I have, but have
found only hints that others have the same problem and no
solutionsI probably can't phrase th search correctly so now I try
a post and hope that I'm not boring everyone
I have a backend with two pvr250's and a couple
Robert Denier wrote:
Since you can remaster your own variation of knoppix and presumably
knoppixmyth the answer is certainly yes. Would it be easy? Probably
not.
I made a bootable distribution of gentoo awhile back and it took quite
some time to work out the details. Just making a change to
anders smith wrote:
I've been searching the list for answers to a problem I have, but have
found only hints that others have the same problem and no
solutionsI probably can't phrase th search correctly so now I try
a post and hope that I'm not boring everyone
I have a backend with two
Kevin Kuphal wrote:
Robert Denier wrote:
Since you can remaster your own variation of knoppix and presumably
knoppixmyth the answer is certainly yes. Would it be easy? Probably
not.
I made a bootable distribution of gentoo awhile back and it took
quite some time to work out the details.
Have you or anyone else seen instructions on rolling your own KnoppMyth
CD? I use CVS fairly often and I'd love to use the CD bootable frontend
aspect of KnoppMyth but the fact that CVS often has a different protocol
version than the release causes problems with the CD boot since the
KnoppMyth
Hi everyone,
I think I'm oh so close to having my myth install working, but am
stuck on an empty dvb_pids table.
First, a little background: Have installed FC3, Athlon 1.8, Hauppauge
Nova-T PCI. 2.6.10, fully updated (from uptodate). I've compiled myth
(0.16) from source, and after a
Yes, I've seen them for Knoppix. I have absolutely no idea where
anymore, but I remember seeing them... Check the knoppix.org website.
Again I'm not familiar with knoppixmyth, but most of it should be
applicable.
Kevin Kuphal wrote:
Robert Denier wrote:
Since you can remaster your own
I know I've seen posts about this before, and I'm pretty sure there's a
way to do it, but I can't find it in the config options, and my google
skills are failing me. I'd like to set things up so all the commercial
flagging and transcoding run on the master backend instead of on the box
that
from the knopp myth faq the answer is that knopp myth has to be
installed on the hard drive.
http://knoppmythwiki.homelinux.org/faq/index.php?action=artikelcat=1id=6artlang=en
JIm
On Mon, 07 Feb 2005 17:04:05 -0600, Robert Denier [EMAIL PROTECTED] wrote:
Yes, I've seen them for Knoppix. I
I have Adelphia in Riverside, CA for my cable modem service. For
television, I'm using Dish Network (mainly for some international
channels that aren't available anywhere else). Money's kinda tight, so
I scaled back my programming and only get the international channels and
local channels on
No dice:
Virgin FC1 install
apt-get update apt-get dist-upgrade
[EMAIL PROTECTED] root]# apt-get install transcode
Reading Package Lists... Done
Building Dependency Tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are
1 - 100 of 151 matches
Mail list logo