Ciao,
Licq ha, tra le varie possibilita', l'uso di varie lingue. Bellissimo,
tranne che nulla funziona. Qualcuno ha il file di configurazione in italiano
che puo' mandarmi, oppure dirmi come si possa scrivere ? I file di lingue che
ci sono in
/usr/share/licq/translations
sono tutto
Qualcuno ha notizie certe sul funzionamento del modem Elsa Microlink 56k usb
con Mandrake 8 ?
Grazie per eventuali risposte
Salve a tutti, mi presento sono giuseppe e scrivo da lucca. mi sono iscritto
a questa mailing-list per cercare di capire qualcosa in più del mondo linux e
tentare di eliminare completamente la microsoft.
ho provato ad installare la mandrake 7.2 e devo dire che mi ha stupito in
semplicità e
Sembra una cavolata, ma non so come fare le parentesi graffe. Sotto windows
usavo ALT+(codice ascii) ma sulla mia dstro non funziona...
Sapete aiutarmi'?
Grazie anticipatamente
Paolo
At 17.24 18/05/2001 +0200, you wrote:
Salve a tutti, mi presento sono giuseppe e scrivo da lucca. mi sono iscritto
a questa mailing-list per cercare di capire qualcosa in più del mondo linux e
tentare di eliminare completamente la microsoft.
ho provato ad installare la mandrake 7.2 e devo dire
s escribió:
u, as in usb.
How does one get this to work in 8.0? I've tried reading everything on the
sane site, but... I guess I'm a little dense (or exhausted).
I have sane and all installed. (The mdk rpms included with distro). But
that's about it other than having usb
Can some help me. How to enable a passwd pertected
site for my apache web server. I am trying to create a site with a passwd
protected at /home/httpd/html/onm
What is the 1st step should I do .. ? Any sample
files
I need help ...
Best
Regards,SKLIM
FCS = first customer ship
A release cycle for a Sun product typically goes:
beta 1 (it works a bit)
beta 2 (it kinds works)
beta 3 (we think it works)
release candidate 1 (you might think it works)
release candidate 2 (lots of people think it works)
first customer ship (it really does work now)
On Wed, 16 May 2001, Dwight Follick wrote:
Hi
I've recently been trying to load Mandrake 8.0 on my machine (I'm fricken
sick of Windoze) and when I'm in the installation trying to configure the
XFree86 4.03 part, it tests out my card and it freezes when it switches
screen modes or
At 17:50 16-5-2001 -0700, you wrote:
i used the bzip command below and that gives me a straight .tar file but
when i try to tar -zxvf that it says gzip: stdin: not in gzip format.
any ideas what i might be doing wrong. i also have a
j2sdk-1_3_0_02-linux.bin file which i got from somewhere
On Thu, 17 May 2001 03:17, Geoffrey Lee wrote:
The way I got it to work was not to use the Linux version but the Other
version. Download that and you should have a file named
LimeWireOther.zip.
I gave up on LimeWire and download phex. It works nicely.
John
Hi,
If I want to backup KMail including Mail, Config, Filter Rules etc. Which
locations/files need to be backed up. I think that all the Mail is kept in my
home directory as Mail but I don't know where anything else is?
Any ideas?
TIA,
Jord
--
Jordan Elver
while (!asleep()) sheep++;
Dwight,
I had problems with an SiS 730/630 on board video chipset, similar but
not quite the same. I eventually loaded Mandrake 7.2 (with
MandrakeFreq) instead, at least for the time being, but these are some
possibilities you might try. (IIRC, in Mandrake 8.0 it gave me a
message like can't
Where does linux put log files for FTP? I had a box hacked and I am trying
to find the log files to get an idea of what happened but I dont know where
they get put.
The box was running WUFTP I believe on Red Hat 5.2. I know it isnt Mandrake.
:-(
Any help would be appreciated. I mounted the
On Thu, 17 May 2001, Ari Dias wrote:
Hello people, I have a question!
Why my linux mandraki 8.0 is so slowly that i cant use it!
i have a k6 500mhz!!!
tks
I had the same problem, KDE was so slow that I couldn't get any work done.
When I posted this to the KDE list, all I got was flames, but
your configurations, rules/filter, preferences, etc are in kmailrc under
~/.kde/share/config/. You are correct about the other.
-s
On Thursday 17 May 2001 10:24 am, you wrote:
Hi,
If I want to backup KMail including Mail, Config, Filter Rules etc. Which
locations/files need to be backed up.
Dang, they must be a bunch of mean old buttfaces
who don't want to help anyone,
why did they do that?
On Thursday 17 May 2001 11:11 am, so spoke Irv Mullins:
I had the same problem, KDE was so slow that I couldn't get any work done.
When I posted this to the KDE list, all I got was flames, but
Hi all
I've just installed Win2000 and LM 8.0 on my
machine.
The instalation went fine (think).
After reboot, the graphical lilo bootloader
presented me with an entrie called linux-nonfb (/boot/vmlinux).
Can any tux friend, elucidate me about
this?
Regards,
Nuno Ferreira
Well, I'm almost happy with Mandrake again: voodoo problems minimized, lan
up using iptables, cdburner software working, and even my scanner now
working (thanks, Joan).
However, I'm still having trouble with my epson stylus color 777. It worked
great with just about any of the stylus
On Thu, 17 May 2001, Dave wrote:
I ran into a similar problem with Mandrake 7.2. The problem/solution
turned out to be that Mandrake had detected and chosen a generic X video
driver for my video card, but that generic driver worked very poorly with
my card. Once I changed to the proper
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Nuno Ricardo Loureiro
Ferreira
Sent: Thursday, May 17, 2001 12:23 PM
To: [EMAIL PROTECTED]
Subject: [newbie] linux-nonfb (/boot/vmlinux) entrie on boot loader
Hi all
I've just installed Win2000 and LM
It was Thu, 17 May 2001 11:53:35 -0500 when Chubby Vic wrote:
Perhaps time to look for another window manager?
Paul
Dang, they must be a bunch of mean old buttfaces
who don't want to help anyone,
why did they do that?
On Thursday 17 May 2001 11:11 am, so spoke Irv Mullins:
I had the same
Replying to my own post here...
For any other people that see this behaviour, be careful.
I got a abuse report from our ISP, a sign that the box was
rooted and was being used for malicious attacks.
-e-
Hi all
I've got a Mandrake 7.2 server running a few
Is it possible to setup shares such that both Windows and Mac machines can
access them. Can SAMBA work for both OSs? I need a solution because my
office is half Windows 98 and half Mac 9.0 and currently the file server is
a Mac using PCMacLAN. We won't to move the shares onto a linux machine
-- Weitergeleitete Nachricht --
Subject: Re: [newbie-de] TV unter Linux
Date: Thu, 17 May 2001 18:40:41 +0200
From: uli [EMAIL PROTECTED]
To: Ingo Schneider [EMAIL PROTECTED]
Am Donnerstag, 17. Mai 2001 15:28 schrieben Sie:
Heiner Faber schrieb:
Hast Du auch scantv
-- Weitergeleitete Nachricht --
Subject: Re: [newbie] very slowly
Date: Thu, 17 May 2001 19:59:03 +0200
From: uli [EMAIL PROTECTED]
To: Irv Mullins [EMAIL PROTECTED]
Am Donnerstag, 17. Mai 2001 18:11 schrieben Sie:
On Thu, 17 May 2001, Ari Dias wrote:
Hello people, I have
From: James R. McKenzie [EMAIL PROTECTED]
To: John Clark [EMAIL PROTECTED]
Subject: Re: [newbie] M694D, Mandrake 8.0, Promise Fastrack 66/100,
Lockups, only sees one channel
Date: Thu, 17 May 2001 14:15:42 -0400
I've had crappy luck with Promise cards myself. Including one I bought
made
re: partition magic,
did you install the reiser file system? i'm not sure if pm can recognise
it
bascule
Mark Annandale wrote:
Hiya Guys
Here's a quick one. I have installed a new harddrive as /dev/hdd, installed
Mandrake on it and can no longer boot into Linux. I get LI followed by
Well, it's still strange -- my ThinkPad is a 300MHz Celeron with 64 MB
RAM, and it runs both KDE 2 and Gnome just fine. Your system should be
able to do as well, from a hardware standpoint. Is it possible that even
though the correct X driver is installed, the video settings (refresh
rate,
Hello all, I've just managed to upgrade to Mandrake 8.0 onmy laptop and
everything is perfect, apart from configuring my wavelan and rg1000.
Can anybody please tell me how to do this?
Thanks in advance
Gareth Williams
Hi everyone.
I am mostly happy because everything is going very fast for me in the Linux
world. I recently, about 3 months ago, started using Linux. Until before
that I didn't know anything about it. I am busy studying, reading and
struggling to learn all I can about Linux. I want to learn all I
Dwight,
Getting the prompt is unusual, but sounds like a good thing. I think
you want to try runlevel 5 -- that's multiuser with X. If that doesn't
work try runlevel 3 -- that's multiuser without X (IIRC).
Good luck -- hope it comes up OK.
Randy Kramer
Dwight Follick wrote:
I tried
On Thursday 17 May 2001 15:09, Mark Johnson wrote:
Is it possible to setup shares such that both Windows and Mac machines
can access them. Can SAMBA work for both OSs? I need a solution
because my office is half Windows 98 and half Mac 9.0 and currently the
file server is a Mac using
moses wrote:
test
Response
I can see my FAT32 partitons. I can only see cd-rom cd-writer and floopy.
I want to reach my Fat partitons.
This is my partition Table
1.Win98 1.7 gigs
2.Backup 5 gigs (I want to use that part for both OS)
3.LM 8 (linux ext2)
4.Linux Swap
How can i mount FAT32?
Hi!
I was trying to transfer a folder to my /mnt/dos
directory using KDE. I accidentally copied it to my /mnt folder after that I
dragged/copied it into the /mnt/dos directory. Iam able to restart the
computer but whenever I click on the /mnt/dos directory, the system freezes. Can
anyone
Partition Magic 6 Boot Magic does not recognize the ReiserFS file system.
I wouldn't recommend using PM6 if you're dual booting off a single hard
drive AND using the ReiserFS. PM6 will come up with a prompt to correct a
file system error and if you click no then you can't use PM6, if you click
Gareth Hello all, I've just managed to upgrade to Mandrake 8.0 onmy
Gareth laptop and everything is perfect, apart from configuring my
Gareth wavelan and rg1000.
Gareth Can anybody please tell me how to do this?
I can tell you what I've tried (so far unsuccessfully). I have a
MSI 694D motherboard
onboard via ide 100
onboard promise fasttrak 100 lite
pci fastrak 66
pci ultra 66
-
: ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
: VP_IDE: IDE controller on PCI bus 00 dev 39
: VP_IDE: chipset revision 16
On Thursday 17 May 2001 06:21, John Farrell wrote:
I have an Acer 10x8x32 CD writer. I have managed to make it readable
using /etc/fstab, but how do I write to it? eroaster says I gave it an
invalid resource ID. I found:
http://www.linuxgazette.com/issue57/feenberg.html
but it doesn't seem
Hi ! I am new in Linux and PHP. Did anyone
configure PHPwebmail before ? I am having some error when install my PHPwebmail
. Below are my error message
mysql -u sklim -cherlyn webmail.sqbash:
webmail.sq: No such file or directory
Best
Regards,SKLIM
Hi there,
I went recently onto the website called www.linux-usb.org in which it
tells the devices that are currently supported by Linux that happen to
have USB ports.
To my delight, my scanner was listed (UMAX Astra 1220U), however it
said that I needed kernel version 2.2.19 to
I have downloaded and burned two different iso's
and verified the md5sums. When I boot to cd i choose to install.
Then there is a whole bunch of stuff that it scrolls through, but after it loads
some program to memory I get this: FATAL ERROR STAGE 1: couldn't exec
format. Cannot recover.
On Thursday 17 May 2001 13:54, TezcatlipocA wrote:
Well my question here is if there is going to be a version of Mandrake 8
later on? For what I can see there are some problems with this lates
distro. I wanted to download the new version but I think I should better
wait. One more question:
Hi! Did anyone install it before ?? I am having
some problem when create a user database in MySQL
Best
Regards,SKLIM
webmail-2.1.tgz
Ok, what is libz and where do I get it? rpmfind.net has it but they won't
install on mandrake. I have gotten this error for several tar's I have tried
to ./configure.
--
ICQ# 27396393
Registered Linux User #181996
I recently installed 7.2 and have the following problem when I boot.
If I don't have a zip disk in the drive when I boot, the message hdd:
lost interrupt repeatedly prints on the screen and the boot process
stalls. At this point if I put a disk in the drive I still get the lost
interrupt
no, you will have to update the kernel,, not a big deal, there is a page on
the mandrake site that details exactly how to do it, and it works because I
did it not too long ago myself...
you want to upgrade to 2.2.19 anyway, for security reasons.
I once worked for Umax, its great that they are
One other thing. In part, I wrote:
4. Click Next until you get to the page for the wvlan_cs config.
5. Do your thing.
Step 5 is where I am stuck.
If I forge ahead from Step 5, entering my network name in the ESSID field
and the password in the ENC_KEY field, when I finally get
First--please try not to send htmlized e-mails to this list--some text-based e-mail clients add a lot of extra html stuff to such e-mails and make the e-mail ugly to look at.
As for the problem, the file that you tried to import into your mysql database doesn't exist. Try the same filename with
Can someone
tell me how to query the ip address of an interface from script? I want to
update dyndns.org after my adsl connects but I can't find how to get the ip
after a reconnect.
Thanks
Reggie
On Wednesday 16 May 2001 12:31, Pascal Melanson wrote:
We have a PC at work which is used for development. We use it to program
old boards, Eprom, processors, etc. I need to make the PC work with
multiple boot. I.e. I need to have DOS, Windows 98, WIndows NT, Windows CE
and Linux. I don't
I lost my bookmark toolbar in LM 8.0. I can see how to display it from the
settings menu, but I can't figure out how to add any bookmarks to it?
Can anyone lend a comment?
Thanks,
Steven
On Wednesday 16 May 2001 14:33, manic wrote:
Dear Sir,
how do I get off the mailing list as I am being innundated
with E-mails.
manic.
The information is in the header to each email. It is also on the
linux-mandrake.com web site (as well as a button to push to get off)
On Wednesday 16 May 2001 18:07, Geoffrey Lee wrote:
Hi all,
This has been giving me much trouble. I am trying to build the kernel
module for my NVIDIA GeForce256. I obtained the NVIDIA_kernel-0.9-769.tar
file and extracted it to a directory, then ran make. These are the errors
I got:
On Wednesday 16 May 2001 17:11, ISU COMPU DUDE wrote:
I have a MSI 694D motherboard with onboard VIA 686a chipset ide controller
and Promise FastTrak 100 w/ lite bios. I also have a Promise FastTrak 66
with full bios.
I am trying to use Mandrake 8.0
I have 5 hd's and a cdrom all set to
56 matches
Mail list logo