Hello,
Thank you for all your answers and now I'm confused with all the
solutions... Not used to that after all the years with windows ;-)
If I get it wright I can use MDK also with that config... and I have it
already on cd. (save a lot of download time).
I need a Xwindow program like Kde... If
Hello,
Last night I was looking to create a usr partition using diskdrake under
Mandrake Control Center...Then I could not understand why I have a mnt
hda5 partition called win_d (it shows /r on the file system.
So I went to see my storage devices and there I found this:
Device Type Size MountP
Hello,
I tried to setup a firewall since my notebook will be personal...
I went to mandrake control center and removed the cross in no firewall
at the Drakfirewall.(I left all the boxes blank... hope this is good so)
Then It asked me if I want to install the shorewall package. I clicked
ok. I
I don't know if this will help anyone or not but I just accidently
solved my sound problems. I had the same problem with no sound with a
Cmedia chipset ( 1878?). I was able to hear audio cd's but nothing
else. I double click'd on an mp3 and it opened xmms, which looked as if
it was playing
ok, not quite solved. I have no mpg or mpeg sounds.
--
Troy T. Hall
Registered Linux User #342150
Mandrake Club Member
Abilene, KS.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Very true, and we could also add that older CD-ROM drives (or hifi CD players)
can fail to read CD-RW disks completely, no matter what is written on them.
The subject of burning to CD can become very messy very quickly :-(
Le Samedi 6 Mars 2004 00:23, Bryan Phinney a écrit :
Well, the subject
On Sat, 2004-03-06 at 02:46, DC A wrote:
Yes I tried 10 but it's taking a long time to load. I donno why thorugh. (I
tried to auto allocate 20GB for linux and it's taking more than an hour and
still it's formatting) So I donno whether I'll be able to linux on this
system. Is there any other
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 09:11, Troy Thomas Hall wrote:
I don't know if this will help anyone or not but I just accidently
solved my sound problems. I had the same problem with no sound
with a Cmedia chipset ( 1878?). I was able to hear audio
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 09:21, Troy Thomas Hall wrote:
ok, not quite solved. I have no mpg or mpeg sounds.
xmms plugins?
Anne
- --
Registered Linux User No.293302
Have you visited http://twiki.mdklinuxfaq.org yet?
-BEGIN PGP SIGNATURE-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 15:21, rhein wrote:
2/ There is no such D drive on my win partition. I have one big
14,6 GB for windows. Where does it come from??
It's small - could this be one of those systems with a hidden restore
partition?
OTOH, I
Hello,
You might like to try KolourPaint, a really good paint program for KDE. You
can download Mandrake 9.2 packages at kolourpaint.sf.net.
The pages list all the features, so I won't go over them all here. I just
want to highlight some of the novel and useful features in
Hi,
On Sat, 6 Mar 2004 10:09 am, JoeHill wrote:
On Fri, 05 Mar 2004 19:05:09 +
Margot disseminated the following:
If things carry on as they are currently going, many of those
aspiring young lawyers at Harvard Law School will one day be
participating in Darl's spurious lawsuits - now
On Saturday 06 Mar 2004 01:22, David B. Carter wrote:
Derek Jennings said:
The modprobe snd-cs-4236 loads the driver. But it will not load on the
next
boot unless you configure /etc/modules.conf. That is what alsaconf is
supposed to do for you, but for some reason alsaconf is unable to
Hi all ,
After 1/2 a day of trying i still can 't download the new 10.0 iso .
I am behind a NAT router , so i opened ports 6881 = 6889 and 6969 and 7070 ,
tried DMZ , but nothing works .
I always get the following error :
Problem connecting to tracker - HTTP Error 404: Not Found
The ip
On Saturday 06 March 2004 07:51 am, Bart Salien wrote:
Hi all ,
After 1/2 a day of trying i still can 't download the new 10.0 iso .
I am behind a NAT router , so i opened ports 6881 = 6889 and 6969 and 7070
, tried DMZ , but nothing works .
I always get the following error :
Problem
rhein wrote:
Hello,
I try to use rpmdrake to add a medium (contrib file) and I get this
error message after a long time of waiting...
Unable to update medium...
Errors:
urpmi database locked
urpmi database locked
retrieve of source hdlist failed
no hdlist file found for medium contrib
problem
On Saturday 06 March 2004 06:09, rhein wrote:
Hello,
I try to use rpmdrake to add a medium (contrib file) and I get this
error message after a long time of waiting...
Unable to update medium...
Errors:
urpmi database locked
urpmi database locked
retrieve of source hdlist failed
no hdlist
On Saturday 06 Mar 2004 11:59, et wrote:
On Saturday 06 March 2004 07:51 am, Bart Salien wrote:
Hi all ,
After 1/2 a day of trying i still can 't download the new 10.0 iso .
I am behind a NAT router , so i opened ports 6881 = 6889 and 6969 and
7070 , tried DMZ , but nothing works .
Hello,
My swap file is hd7 with 494MB and it is different from this hd5 called
/mnt/win_d with 525 MB.
When I click on this win_d (hd5) in Konqueror there are 2 directories:
= a system volume information with a file
_restore{2F3FC359-5C9C-424F-B0EF-325C191C6F2E}
= recycled with a nprotect
On Saturday 06 March 2004 07:45, Bart Salien wrote:
Got it working , had to reboot my pc after editing download.py
I have limited upload to 2K , but download isn 't going any faster than 1k
.
Don 't like leaving ports open for 360 hours .
Greetings ,
Bart.
The download speed
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 09:11, Troy Thomas Hall wrote:
I don't know if this will help anyone or not but I just accidently
solved my sound problems. I had the same problem with no sound
with a Cmedia chipset ( 1878?). I was
On Saturday 06 March 2004 04:16 am, Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 09:11, Troy Thomas Hall wrote:
I don't know if this will help anyone or not but I just
accidently solved my sound problems. I had the same problem
with no sound
On Fri, Mar 05, 2004 at 08:50:50PM -0500, Greg Meyer wrote:
On Friday 05 March 2004 07:31 pm, Todd Slater wrote:
These do not support Ogg Vorbis yet. From tech support:
Currently our CD based players do not support OGG file format. There is
no ETA as to when this may be offered.
I
On Saturday 06 March 2004 09:15 am, Todd Slater wrote:
Proving once again that good help is hard to find! ;-)
According to those pages, then, the cd-based players iMP250+ have the
firmware upgrade, but it's beta and works with oggs encoded up to
168kbs. The player may choke or skip parts if
Hi all, I have the 5 CD set of 10.0 and it is not playing nicely with my comp.
This is the first time of all the releases that I have had such a mess. I
have two choices on boot. the 2.4.xx kernel or the 2.6.xx kernel. Both go
through the boot up fine but 2.6.xx ends with just a blank screen
On Sat, Mar 06, 2004 at 10:37:38AM -0500, Greg Meyer wrote:
On Saturday 06 March 2004 09:15 am, Todd Slater wrote:
Proving once again that good help is hard to find! ;-)
According to those pages, then, the cd-based players iMP250+ have the
firmware upgrade, but it's beta and works with
On Friday 05 March 2004 08:23 pm, David B. Carter wrote:
Mike Adolf said:
I have not read all the correspondence on this problem, so I may be
suggesting
something already tried. I also have the same sound system as you. For a
long time I used 4236 driver (on MDK 91) and I could play CDs
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 21:01, rhein wrote:
Hello,
My swap file is hd7 with 494MB and it is different from this hd5
called /mnt/win_d with 525 MB.
When I click on this win_d (hd5) in Konqueror there are 2
directories: = a system volume
On Saturday 06 March 2004 11:03 am, Todd Slater wrote:
Greg, do you encode by specifying bitrate or quality level? I typically
encode at as low as -q 3 to save disc space (playing oggs on a Zaurus
using CF), which reports a nominal bitrate of 112. Just wondering if
you've found a good -q level
Hi Juan
Firstly, the driver you have is old. The newest driver is version 1.0.5336.
Just so you know.
In your XF86Config-4, you have the following lines:
Section Device
Identifier device1
Driver vesa
Option DPMS
EndSection
That driver line there has to be set to nvidia. I can't
I installed spamassassin 2.63 a few weeks ago via CPAN leaving the old 2.41
intact. Looking at the CPAN install log I can't seem to decipher where the
newer version has been installed. Any help would be appreciated.
Chris
--
Regards
Chris
A 100% Microsoft free computer
Registered
On Fri, 27 Feb 2004 12:11:27 -0500
Allen/gore/SlackWareWolf [EMAIL PROTECTED] wrote:
Now if only HP would sell desktops and laptops running
HP-UX :) I can get Linux and install it, hell this is an HP
Why? :)
Another problem these hardware makers have is using
integrated hardwareFor
On Saturday 06 March 2004 12:04 pm, Chris wrote:
I installed spamassassin 2.63 a few weeks ago via CPAN leaving the old 2.41
intact. Looking at the CPAN install log I can't seem to decipher where the
newer version has been installed. Any help would be appreciated.
I am pretty sure that
Ok
Thanks for the tip
Christophe
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 21:01, rhein wrote:
Hello,
My swap file is hd7 with 494MB and it is different from this hd5
called /mnt/win_d with 525 MB.
When I click on this win_d (hd5) in Konqueror
I am following the advice given by Derek Jennings for updating 10.0rc1
to full 10.0 release status.
My question, before I 'urpmi --auto-select' is this..
I am currently logged in to KDE and I am sure several other things are
running. Should I get out of KDE and stop what services I can BEFORE
On Thu, 4 Mar 2004 21:37:50 -0700
Glenn [EMAIL PROTECTED] wrote:
IIRC, wait three weeks and you, too, can download the 3-ISO set. Just
one of the benefits of club membership. Look at it this way, once
it's spread more
Or, don't wait at all, if you've had access to the Cooker repository
Hi,
This is actually my first post ever to any mailing list :-S
So here is my problem, I use Mandrake 10.0 (ftp/coocer). I am sharing my
ADSL (pppoe), I configured it with drakeconnect and here are results
from syslog:
Mar 6 19:16:24 nolife shorewall: Loading /usr/share/shorewall/functions...
On Saturday 06 March 2004 12:32 pm, Bryan Phinney wrote:
On Saturday 06 March 2004 12:04 pm, Chris wrote:
I installed spamassassin 2.63 a few weeks ago via CPAN leaving the old
2.41 intact. Looking at the CPAN install log I can't seem to decipher
where the newer version has been installed.
On Saturday 06 March 2004 04:02 pm, Thinker wrote:
I am following the advice given by Derek Jennings for updating 10.0rc1
to full 10.0 release status.
My question, before I 'urpmi --auto-select' is this..
I am currently logged in to KDE and I am sure several other things are
running. Should
On Saturday 06 Mar 2004 21:02, Thinker wrote:
I am following the advice given by Derek Jennings for updating 10.0rc1
to full 10.0 release status.
My question, before I 'urpmi --auto-select' is this..
I am currently logged in to KDE and I am sure several other things are
running. Should I
On Fri, 5 Mar 2004 09:52:46 -0500
Thinker [EMAIL PROTECTED] wrote:
So.. you are saying that I can reinstall with the 10.0rc1 disks I made
a few weeks ago and go to the cooker and update that to what is the
Barring goofs like getting the boot table fubar'd (that has happened to
me in the
On Friday 05 Mar 2004 22:45, Klemens Arro wrote:
SNIP
Thanks, but it didn't help, shorewall started but I still can't share my
ADSL.
As for the question, no I didn't put it there, Mandrake Controll Center
internet connection sharing tool put it there.
Here is /etc/shorewall/interfaces:
On Sat, 2004-03-06 at 19:50, Brian Parish wrote:
On Sun, 2004-03-07 at 08:54, Josenildo Marques wrote:
Hello !
I installed 9.2 for a friend of mine and everything went smoothly. I
even updated it completely. His computer had a Windows partition and I
decided to turn it into a /home
On Sat, 06 Mar 2004 10:15:01, Christophe Rhein wrote:
Hello,
Thank you for all your answers and now I'm confused with all the
solutions... Not used to that after all the years with windows ;-)
If I get it wright I can use MDK also with that config... and I have it
already on cd. (save a lot of
just seeing if a changed setting will get my emails through to this
list.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello everyone..
I have a simple file and I try to compile it with -static flag, but I
can't. I use:
gcc -o shellcode -ggdb -static shellcode.c
but I got the following error::
/usr/bin/ld: cannot find -lc
collect2: ld returned 1 exit status
my test file is the following:
#include stdio.h
int
My HP 4P scanner worked fine with an Adaptec SCSI card in Windows 2000
I installed the card and attached scanner.
HardDrake recognizes the SCSI card as a Adaptec AHA 7850
ScannerDrake does not find a scanner.
When I manually install the scanner it is listed in list of HP scanners.
After supposed
On Saturday 06 March 2004 08:42 am, Dennis Myers wrote:
Hi all, I have the 5 CD set of 10.0 and it is not playing nicely with my
comp. This is the first time of all the releases that I have had such a
mess. I have two choices on boot. the 2.4.xx kernel or the 2.6.xx kernel.
Both go through
I have a 850 AMD cpu
640 megs of ram
GForce TI 4400 AGP
Tyan Motherboard
I have been surfing for the plugins for xine so I can play dvds in Mandrake
9.2
I am still new at this and all the different rpms and tars I find are
confusing. I'm not sure which one to use or how many to use. If I could
Mike Adolf said:
That's great! I'll give it a try as soon as I get a chance. Did you run
alsaconf to autodetect the card using that driver? Or did you just
manually configure it and it worked?
I probably won't get a chance to try it tonight, and I'm going to be out
of town tomorrow, but I'll
I have a 850 AMD cpu
640 megs of ram
GForce TI 4400 AGP
Tyan Motherboard
I have been surfing for the plugins for xine so I can play dvds in Mandrake
9.2
I am still new at this and all the different rpms and tars I find are
confusing. I'm not sure which one to use or how many to use. If I could
Derek Jennings said:
Given that your soundchip was not detected on installation, or that
alsaconf
fails to detect it, then I suspect you may may a problem with IRQ
conflicts.
If you type 'dmesg' in a terminal you will see all the boot messages. If
you
scroll up you may see some clues
On Saturday 06 March 2004 09:18 pm, Dennis Myers wrote:
On Saturday 06 March 2004 08:42 am, Dennis Myers wrote:
Hi all, I have the 5 CD set of 10.0 and it is not playing nicely with my
comp. This is the first time of all the releases that I have had such a
mess. I have two choices on boot.
Robert Beach wrote:
I have a 850 AMD cpu
640 megs of ram
GForce TI 4400 AGP
Tyan Motherboard
I have been surfing for the plugins for xine so I can play dvds in Mandrake
9.2
I am still new at this and all the different rpms and tars I find are
confusing. I'm not sure which one to use or how many
On Saturday 06 March 2004 09:45 pm, Greg Meyer wrote:
On Saturday 06 March 2004 09:18 pm, Dennis Myers wrote:
On Saturday 06 March 2004 08:42 am, Dennis Myers wrote:
Hi all, I have the 5 CD set of 10.0 and it is not playing nicely with
my comp. This is the first time of all the releases
Does anyone know the name of the package with the KDE Theme Manager in it?
Thanks
--Marc
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I installed the AMD64 binary version (yes, on an AMD64 system) of XFree86 4.4.0,
downloaded from the XFree86.org site. I installed on an eMachines M6805, and I'm
pleased to say that I've been able to get the native 1280x800 resolution on the LCD,
and I've been able to simultaneously drive an
57 matches
Mail list logo
